Your World of Legal Intelligence
 United States | 1-800-335-6202

Airworthiness Directives; Dassault Aviation Airplanes

As Enacted ( Federal Register) Cited authorities 3 Cited in Related
Vincent

Federal Register, Volume 82 Issue 4 (Friday, January 6, 2017)

Federal Register Volume 82, Number 4 (Friday, January 6, 2017)

Rules and Regulations

Pages 1595-1598

From the Federal Register Online via the Government Publishing Office www.gpo.gov

FR Doc No: 2016-31871

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

Docket No. FAA-2016-7420; Directorate Identifier 2015-NM-017-AD; Amendment 39-18774; AD 2017-01-07

RIN 2120-AA64

Airworthiness Directives; Dassault Aviation Airplanes

AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for all Dassault Aviation Model FAN JET FALCON airplanes; Model FAN JET FALCON SERIES C, D, E, F, and G airplanes; Model MYSTERE-FALCON 200 airplanes; Model MYSTERE-FALCON 20-C5, 20-D5, 20-E5, and 20-F5 airplanes; and MYSTERE-FALCON 50 airplanes. This AD was prompted by a report that, during approach for landing, the main entry door detached from an airplane. This AD requires a functional test or check of the main entry door closure and warning system, and applicable door closing inspections, adjustments, operational tests, and corrective actions if necessary. We are issuing this AD to address the unsafe condition on these products.

DATES: This AD is effective February 10, 2017.

The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of February 10, 2017.

ADDRESSES: For service information identified in this final rule, contact Dassault Falcon Jet Corporation, Teterboro Airport, P.O. Box 2000, South Hackensack, NJ 07606; telephone 201-440-6700; Internet http://

Page 1596

www.dassaultfalcon.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425 227-1221. It is also available on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2016-7420.

Examining the AD Docket

You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2016-

7420; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Office (telephone 800-647-5527) is Docket Management Facility, U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Tom Rodriguez, Aerospace Engineer, International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton, WA 98057-3356; telephone 425-227-1137; fax 425-227-1149.

SUPPLEMENTARY INFORMATION:

Discussion

We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Dassault Aviation Model FAN JET FALCON airplanes; Model FAN JET FALCON SERIES C, D, E, F, and G airplanes; Model MYSTERE-FALCON 200 airplanes; Model MYSTERE-FALCON 20-

C5, 20-D5, 20-E5, and 20-F5 airplanes; and MYSTERE-FALCON 50 airplanes. The NPRM published in the Federal Register on July 1, 2016 (81 FR 43120).

The European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Union, has issued EASA Airworthiness Directive 2015-0007, dated January 15, 2015 (referred to after this as the Mandatory Continuing Airworthiness Information, or ``the MCAI''), to correct an unsafe condition for all Dassault Aviation Model FAN JET FALCON airplanes; Model FAN JET FALCON SERIES C, D, E, F, and G airplanes; Model MYSTERE-FALCON 200 airplanes; Model MYSTERE-

FALCON 20-C5, 20-D5, 20-E5, and 20-F5 airplanes; and MYSTERE-FALCON 50 airplanes. The MCAI states:

During approach for landing, a Mystegravere-Falcon 20-X5 lost the main entrance door MED at an altitude of 7,000 feet. The flight crew maintained control of the aeroplane to land uneventfully. The results of the preliminary technical investigations concluded that the cause of this event could be either a broken cable, or an unlocked safety catch, associated with one or two deficient micro switches.

This condition, if not detected and corrected, could lead to in-

flight opening and/or detachment of the Crew/Passenger door, possibly resulting in loss of control of the aeroplane, and/or injury to persons on the ground.

To address this potential unsafe condition, Dassault Aviation issued Service Bulletins (SB) F20-789, F200-133 and MF50-531, providing instructions for inspection/adjustment, as well as an operational test of the Crew/Passenger door closure.

For the reasons described above, this EASA AD requires a one-

time accomplishment of a functional test/check of the MED closure/

warning system. It also requires a general visual inspection and operational test of the Crew/Passenger door including the control and latching mechanisms and, depending on findings, applicable corrective actions.

Corrective actions include adjusting the telescopic rod bolts on the door until the clearance between the lower part of the door and the fuselage is within the specified tolerances. The corrective actions for the control and latching mechanisms include adjusting components and replacing damaged components (including pull latches, microswitches, pulleys, and cables). Signs of damage include cracks, corrosion, wear, and distortion. You may examine the MCAI in the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2016-7420.

Comments

We gave the public the opportunity to participate in developing this AD. We received no comments on the NPRM or on the determination of the cost to the public.

Conclusion

We reviewed the relevant data and determined that air safety and the public interest require adopting this AD as proposed except for minor editorial changes. We have determined that these minor changes:

Are consistent with the intent that was proposed in the NPRM for correcting the unsafe condition; and

Do not add any additional burden upon the public than was already proposed in the NPRM.

Related Service Information Under 1 CFR Part 51

Dassault Aviation issued the following service information.

Dassault Service Bulletin F20-789, also referred to as 789, dated December 9, 2014.

Dassault Service Bulletin F50-531, also referred to as 531, dated December 9, 2014.

Dassault Service Bulletin F200-133, also referred to as 133, dated December 9, 2014.

The service information describes procedures for inspections, adjustments, and operational tests of certain doors and corrective actions. These documents are distinct since they apply to different airplane models. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

Costs of Compliance

We estimate that this AD affects 392 airplanes of U.S. registry.

We estimate the following costs to comply with this AD:

Estimated Costs

----------------------------------------------------------------------------------------------------------------

Cost per Cost on U.S.

Action Labor cost Parts cost product operators

----------------------------------------------------------------------------------------------------------------

Inspections/adjustments/operational 4 work-hours x $85 per $0 $340 $133,280

tests. hour = $340.

----------------------------------------------------------------------------------------------------------------

We have received no definitive data that will enable us to provide cost estimates for the on-condition actions specified in this AD.

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue

Page 1597

rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. ``Subtitle VII: Aviation Programs,'' describes in more detail the scope of the Agency's authority.

We are issuing this rulemaking under the authority described in ``Subtitle VII, Part A, Subpart III, Section 44701: General requirements.'' Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

We determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

  1. Is not a ``significant regulatory action'' under Executive Order 12866;

  2. Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979);

  3. Will not affect intrastate aviation in Alaska; and

  4. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

    List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.

    Adoption of the Amendment

    Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

    PART 39--AIRWORTHINESS DIRECTIVES

    0

  5. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.

    Sec. 39.13 Amended

    0

  6. The FAA amends Sec. 39.13 by adding the following new airworthiness directive (AD):

    2017-01-07 Dassault Aviation: Amendment 39-18774; Docket No. FAA-

    2016-7420; Directorate Identifier 2015-NM-017-AD.

    (a) Effective Date

    This AD is effective February 10, 2017.

    (b) Affected ADs

    None.

    (c) Applicability

    This AD applies to the Dassault Aviation airplanes, certificated in any category, identified in paragraphs (c)(1) through (c)(5) of this AD, all airplanes.

    (1) Model FAN JET FALCON airplanes.

    (2) Model FAN JET FALCON SERIES C, D, E, F, and G airplanes.

    (3) Model MYSTERE-FALCON 200 airplanes.

    (4) Model MYSTERE-FALCON 20-C5, 20-D5, 20-E5, and 20-F5 airplanes.

    (5) Model MYSTERE-FALCON 50 airplanes.

    (d) Subject

    Air Transport Association (ATA) of America Code 52, Doors.

    (e) Reason

    This AD was prompted by a report that, during approach for landing, the main entry door detached from an airplane. We are issuing this AD to detect and correct defective crew/passenger doors. Such a condition could result in the in-flight opening or detachment of the crew/passenger door, which could result in loss of control of the airplane and injury to persons on the ground.

    (f) Compliance

    Comply with this AD within the compliance times specified.

    (g) Main Entry/Passenger/Crew Door Check or Functional Test

    Within 65 days after the effective date of this AD, unless done within 6 months before the effective date of this AD, do the applicable functional test or door lock check specified in paragraph (g)(1), (g)(2), or (g)(3) of this AD, and do all applicable corrective actions, using a method approved by the Manager, International Branch, ANM-116, Transport Airplane Directorate, FAA; or the European Aviation Safety Agency (EASA); or Dassault Aviation's EASA Design Organization Approval (DOA). Do all applicable corrective actions before further flight.

    (1) For Model FAN JET FALCON airplanes; Model FAN JET FALCON SERIES C, D, E, F, and G airplanes; and Model MYSTERE-FALCON 20-C5, 20-D5, 20-E5, and 20-F5 airplanes: A functional test of the passenger/crew door warning system.

    (2) For Model MYSTERE-FALCON 200 airplanes: A check of the door locking indicator system.

    (3) For Model MYSTERE-FALCON 50 airplanes: A check of the door lock indication.

    (h) Main Entry/Passenger/Crew Door Closing Inspections, Adjustments, and Operational Tests and Corrective Actions

    Within 330 flight hours or 13 months, whichever occurs first after the effective date of this AD, unless already done: Do the applicable door closing inspections, adjustments, and operational tests, and do all applicable corrective actions, in accordance with the Accomplishment Instructions of the applicable service information identified in paragraph (h)(1), (h)(2), or (h)(3) of this AD. Do all applicable corrective actions before further flight.

    (1) For Model FAN JET FALCON airplanes; Model FAN JET FALCON SERIES C, D, E, F, and G airplanes; and Model MYSTERE-FALCON 20-C5, 20-D5, 20-E5, and 20-F5 airplanes: Dassault Service Bulletin F20-

    789, also referred to as 789, dated December 9, 2014.

    (2) For Model MYSTERE-FALCON 200 airplanes: Dassault Service Bulletin F200-133, also referred to as 133, dated December 9, 2014.

    (3) For Model MYSTERE-FALCON 50 airplanes: Dassault Service Bulletin F50-531, also referred to as 531, dated December 9, 2014.

    (i) Other FAA AD Provisions

    The following provisions also apply to this AD:

    (1) Alternative Methods of Compliance (AMOCs): The Manager, International Branch, ANM-116, Transport Airplane Directorate, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the International Branch, send it to ATTN: Tom Rodriguez, Aerospace Engineer, International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton, WA 98057-3356; telephone 425-227-1137; fax 425-227-1149. Information may be emailed to: 9-ANM-116-AMOC-REQUESTS@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.

    (2) Contacting the Manufacturer: For any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, International Branch, ANM-116, Transport Airplane Directorate, FAA; or the EASA; or Dassault Aviation's EASA DOA. If approved by the DOA, the approval must include the DOA-authorized signature.

    (j) Related Information

    Refer to Mandatory Continuing Airworthiness Information (MCAI) EASA Airworthiness Directive 2015-0007, dated January 15, 2015, for related information. This MCAI may be found in the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2016-7420.

    Page 1598

    (k) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

    (2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.

    (i) Dassault Service Bulletin F20-789, also referred to as 789, dated December 9, 2014.

    (ii) Dassault Service Bulletin F50-531, also referred to as 531, dated December 9, 2014.

    (iii) Dassault Service Bulletin F200-133, also referred to as 133, dated December 9, 2014.

    (3) For service information identified in this AD, contact Dassault Falcon Jet Corporation, Teterboro Airport, P.O. Box 2000, South Hackensack, NJ 07606; telephone 201-440-6700; Internet http://www.dassaultfalcon.com.

    (4) You may view this service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221.

    (5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.

    Issued in Renton, Washington, on December 23, 2016.

    Thomas Groves,

    Acting Manager, Transport Airplane Directorate, Aircraft Certification Service.

    FR Doc. 2016-31871 Filed 1-5-17; 8:45 am

    BILLING CODE 4910-13-P

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT