Antidumping: alloy steel pipe from Mexico,
FR, February 08, 2000 › Notices › International Trade Administration
Linked as:FR, February 08, 2000 › Notices › International Trade Administration
Linked as:Text
Federal Register: February 8, 2000 (Volume 65, Number 26)NoticesPage 6136-6139From the Federal Register Online via GPO Access [wais.access.gpo.gov]
DOCID:fr08fe00-33
DEPARTMENT OF COMMERCE
International Trade Administration
A-201-805Certain Circular Welded Non-Alloy Steel Pipe From Mexico; Final Results of Administrative Reviews
AGENCY: Import Administration, International Trade Administration, Department of Commerce.
ACTION: Notice of final results of administrative reviews.
SUMMARY: On June 25, 1999, the Department of Commerce (the Department) published in the Federal Register the preliminary results of the 1992- 1993 and 1993-1994 administrative reviews of the antidumping duty order on certain circular welded non-alloy steel pipe from Mexico (64 FR 34190). These reviews cover one manufacturer/exporter of the subject merchandise during the periods of review (POR) for April 28, 1992 through October 31, 1993, (the 92/93 POR) and November 1, 1993 through October 31, 1994 (the 93/94 POR).
We gave interested parties an opportunity to comment on the preliminary results. Based upon our analysis of the comments received we have not changed the results from those presented in our preliminary results for the 92/93 administrative review. However, we have changed the results for the 93/94 administrative review.
EFFECTIVE DATE: February 8, 2000.
FOR FURTHER INFORMATION CONTACT: John Drury at (202) 482-0195 or Linda Ludwig at (202) 482-3833, Antidumping and Countervailing Duty Enforcement Group III, Import Administration, International Trade Administration, U.S. Department of Commerce,14th Street and Constitution Avenue, NW, Washington, DC 20230.
Applicable Statute and Regulations
Unless otherwise indicated, all citations to the Tariff Act of 1930, as
[Page 6137]amended (the Tariff Act) and to the Department's regulations are in reference to the provisions as they existed on December 31, 1994.
SUPPLEMENTARY INFORMATION:
Background
The Department published an antidumping duty order on circular welded non-alloy steel pipe and tube from Mexico on November 2, 1992 (57 FR 49453). The Department published a notice of Opportunity to Request an Administrative Review of the antidumping duty order for the 92/93 POR on November 3, 1993 (58 FR 58682). On November 19, 1993, respondent Hylsa S.A. de C.V. (Hylsa) requested that the Department conduct an administrative review of the antidumping duty order on circular welded non-alloy steel pipe and tube from Mexico. On November 30, 1993, respondent Tuberia Nacional S.A. de C.V. (TUNA) requested that the Department conduct an administrative review of this order. We initiated this review on January 18, 1994 (59 FR 2593).
The Department published a notice of Opportunity to Request an Administrative Review of the antidumping duty order for the 93/94 POR on November 10, 1994 (59 FR 56034). On November 29, 1994, respondent Hylsa requested that the Department conduct an administrative review of the antidumping duty order on circular welded non-alloy steel pipe and tube from Mexico. On November 30, 1994, respondent Western American Manufacturing, Inc. (Western American) requested that the Department conduct an administrative review of this order. We initiated this review on December 15, 1994. (59 FR 64650).
We published the preliminary results of these reviews, and termination of reviews with respect to TUNA and Western American, in the Federal Register on June 25, 1999 (Circular Welded Non-Alloy Steel Pipe and Tube From Mexico: Preliminary Results of Antidumping Duty Administrative Reviews; and Partial Revocation, 64 FR 34190 (Preliminary Results)). Hylsa fileda case brief on July 26, 1999; we did not receive any other case or rebuttal comments.
The Department has now completed these reviews in accordance with section 751 of the Tariff Act.
Scope of the Review
The review of circular welded non-alloy steel pipe and tube covers products of circular cross-section, not more than 406.4 millimeters (16 inches) in outside diameter, regardless of wall thickness, surface finish (black, galvanized, or painted), or end finish (plain end, beveled end, threaded, or threaded and coupled). Those pipes and tubes are generally known as standard pipe, though they may also be called structural or mechanical tubing in certain applications. Standard pipes and tubes are intended for the low pressure conveyance of water, steam, natural gas, air and other liquids and gases in plumbing and heating systems, air conditioning units, automatic sprinkler systems, and other related uses. Standard pipe may also be used for light load-bearing and mechanical applications, such as for fence tubing, and for protection of electrical wiring, such as conduit shells.
The scope is not limited to standard pipe and fence tubing, or those types of mechanical and structural pipe that are used in standard pipe applications. All carbon steel pipes and tubes within the physical description outlined above are included within the scope of this review, except line pipe, oil country tubular goods, boiler tubing, cold-drawn or cold-rolled mechanical tubing, pipe and tube hollows for redraws, finished scaffolding, and finished rigid conduit. In accordance with the Final Negative Determination of Scope Inquiry (56 FR 11608, March 21, 1996), pipe certified to the API 5L line pipe specification, or pipe certified to both the API 5L line pipe specifications and the less-stringent ASTM A-53 standard pipe specifications, which fall within the physical parameters as outlined above, and entered as line pipe of a kind used for oil and gas pipelines, are outside of the scope of the antidumping duty order.
Imports of these products are currently classifiable under the following Harmonized Tariff Schedule (HTS) subheadings: 7306.3010.00, 7306.30.50.25, 7306.30.50.32, 7306.30.50.40, 7306.30.50.55, 7306.30.50.85, and 7306.30.50.90. These HTS item numbers are provided for convenience and customs purposes. The written descriptions remain dispositive.
Analysis of Comments Received
Comment 1: Use of Best Information Available for 92/93 Administrative Review.
Hylsa takes issue with the Department's statement that [t]he inability of Hylsa to reconcile aggregate quantities and values to its financial statements throws into doubt the accuracy of Hylsa's reported transaction-specific sales, and that because of such inaccuracies, the Department does [n]ot believe that it is possible to calculate an accurate margin for the first review. (64 FR 34190, at 34192). On the contrary, Hylsa states that the Department was able to verify that the reported information was consistent with the sales information in Hylsa's accounting system. Any discrepancies, argues Hylsa, were minor, and did not undermine the integrity of the response.
By way of explaining any discrepancies, Hylsa points to the fact that the verification for the review took place over 2\1/2\ years after Hylsa filedits initial response. In the intervening time, according to Hylsa, a failure of a computer hard drive resulted in the loss of the database used to prepare the original response. Compounding the problem, according to Hylsa, is the fact that it had to respond to Department requests for submissions and information concerning four separate reviews. According to Hylsa, the burden of responding to information requests, and preparing for verifications for the 94/95 administrative review concerning the same product, prevented Hylsa from having adequate time and resources to resolve this problem.
In examining the discrepancies found by the Department, Hylsa classifies them into two categories. The first category contains errors that Hylsa asserts are inconsequential because, according to Hylsa, the sales involved will not be used in the Department's margin calculations. These involve third country sales, and sales regarding unreported secondary merchandise.
Hylsa places the discrepancies between both U.S. and home market quantity and value figures into the second category. These discrepancies might affect the Department's dumping calculations. However, according to Hylsa, these discrepancies were small and insignificant for the purposes of verifying the accuracy of Hylsa's response.
Furthermore, Hylsa states that it cooperated with the Department to the best of its ability to provide the requested information. Given the nature of the errors, and the fact that Hylsa cooperated with the Department, Hylsa believes that the submitted information was sufficient and that there is no reasonable basis for the Department not to use the submitted data.
Petitioners did not comment on the issues.
Department's Position
We disagree with respondent. To begin, the Department takes issue with Hylsa's statement that it could not provide the necessary database because of a computer failure. During the
[Page 6138]verification, Hylsa stated to the Department that it had changed computer systems and neglected to preserve those data files which it would need to document and explain its method of responding to the Department's questionnaire. (See verification report at page 20). Thus, rather than being the result of a computer failure, findings at verification indicated that the company, in the process of changing computer systems, simply failed to preserve a key database.
With regard to the errors in quantity and value, both those known before verification and those discovered at verification, the Department disagrees with Hylsa's statements that they were either minor or irrelevant to the Department's analysis. Establishing the completeness and accuracy of the response with respect to the quantity and value of sales in both the home and U.S. markets is a very significant element of verification. Only with a complete and accurate response can the Department reasonably calculate values for a price analysis.
At verification the Department ascertained that Hylsa's submission contained two errors. Both errors prevented the Department from establishing completeness and accuracy. The first error was that certain sales of subject merchandise were not reported to the Department until the verification, including large amounts of sales of subject merchandise in the home market. The second error was that even with these unreported sales included, Hylsa was unable to reconcile quantity and value figures. While the Department provided Hylsa with three separate opportunities to reconcile its quantity and value figures during the verification process, using separate databases, Hylsa was ultimately unable to reconcile any of the differences (See verification report at 16).
With regard to the first error (unreported sales), the Department discovered at verification that approximately 10 percent of sales of subject merchandise in the home market (most of which, but not all, were seconds) had not been reported and that a large volume of third country sales were not reported. The failure to report approximately 10 percent of home market sales until verification is especially disturbing and, by itself, is reasonable grounds to apply BIA to this case (
In addition to the failure of Hylsa to report all home market sales of subject merchandise, the Department was unable to verify the quantity and value figures for both home market and U.S. sales for the review. Hylsa claims that the loss of the database used to create the original submission, as well as the need to respond to multiple Department requests for information on various reviews over a one-year period, complicated its efforts to reconcile quantity and value figures. However, the Department provided Hylsa with three separate opportunities to reconcile the quantity and value figures during verification (See verification report at 16). Hylsa was unable to do so. The failure to verify the submitted information is sufficient grounds for the application of BIA (
Despite its failure to reconcile quantity and value, Hylsa argues that the percentage differences were minor and did not prevent the Department from making reasonable price comparisons. However, even accepting Hylsa's figures, some of the percentage differences are sufficiently great to affect the margin calculations (See Analysis Memorandum, dated January 7, 2000). More importantly, because the Department was unable to verify quantity and value figures, we have no way of determining whether the unreported sales we uncovered represented all unreported sales. Verification is not a complete audit, and not an opportunity to provide substantial new data. As we said in Final Results of Antidumping Duty Administrative Review; Sodium Nitrate from Chile (52 FR 25897, 25898 (July 9, 1987)):
Comment 4
SQM claims that during the first period only 3.28 percent and during the second period only 1.60 percent of sales in the United States of commercial grade nitrates were not included in its response and these omissions would not have appreciably affect the Department's analysis.
Department's Position
The Department was unable to complete its price analysis because of the omission of an undeterminable number of U.S. sales and a substantial number of other deficiencies found at verification. The purpose of verification is to confirm the accuracy of the data submitted; the Department is not authorized to use verification for the purpose of supplementing the information originally missing from the response and investigating these unreported sales. Failure to include certain sales information in the original response meant that the Department was not able to conduct verification.
Taken together, the Department believes that the totality of the errors
[Page 6139]and omissions found at verification render Hylsa's submitted data unusable for purposes of calculating a margin. To summarize, at verification the Department found that both the reported quantity and value of home market sales were misreported to varying degrees. Additionally, the value of sales to the United States was also misreported. Hylsa was unable to reconcile these differences. Finally, Hylsa failed to report a number of home market sales of subject merchandise until the Department arrived at Hylsa to begin verification.
The decision to resort to BIA in an administrative review is made on a case-by-case basis after evaluating all evidence in the administrative record. See Allied-Signal Aerospace Corp. v. United States,
Comment 2: Use of Best Information Available for 93/94 Administrative Review.
Hylsa believes that the Department's use of BIA in establishing Hylsa's cost of production in the second review is unfair. While acknowledging that it failed to report weighted-average costs for the full POR, Hylsa states that it had no reason to suspect that its methodology was inappropriate until verification. In fact, Hylsa indicates that it had ample reason to believe that the methodology was the Department's preferred methodology for this review.
In the second administrative review, Hylsa reported six-month costs corresponding to the time in which Hylsa made sales to the United States. The Department approved a six-month reporting period for sales data in this review, and had approved six-month cost reporting for the 94/95 administrative review. Furthermore, after the submission, the Department did not notify Hylsa that the cost data were in error. Citing Olympic Adhesives, Inc. v. U.S., 899 F.2d 1565, 1573 (Fed. Cir. 1990), Hylsa indicates that the Department was required to give notice of any perceived inadequacies of the responses. Since the Department did not do so prior to verification, Hylsa asserts, there was no reason to suspect that the reported cost data was unacceptable. Therefore, in the interest of fairness, Hylsa requests that the Department use Hylsa's reported costs for this review.
Petitioners did not comment on the issues.
Department's Position
We agree with respondent, and have used its reported costs when calculating the margin for this administrative review. The Department accepted limited reporting in the third administrative review. As the Department used a similar methodology in a previous review, the use of limited reporting in this review is consistent with previous practice. Further, the Department did not request that Hylsa alter its reporting methodology in this review. Consequently, application of BIA for this review is not warranted.
Final Results of Review
Based on our review of the arguments presented above, for these final results we have made no changes in the margins for Hylsa in the first review. We have determined that Hylsa's weighted-average margin for the period April 28, 1992 through October 31, 1993 is 32.62 percent. Hylsa's margin for the November 1, 1993 through October 31, 1994 period of review is 7.17 percent.
The Department shall determine, and the U.S. Customs Service shall assess, antidumping duties on all appropriate entries. For assessment purposes, we have calculated importer-specific ad valorem duty assessment rates for the merchandise based on the ratio of the total amount of antidumping duties calculated for the examined sales during the POR to the total quantity of sales examined during the POR. The Department will issue appraisement instructions directly to Customs.
Furthermore, the following deposit requirements will be effective upon completion of the fnal results of these administrative reviews for all shipments of circular welded non-alloy steel pipe from Mexico entered, or withdrawn from warehouse, for consumption on or after the publication of the final results of these administrative reviews, as provided in section 751(a)(1) of the Tariff Act:
(1) The cash deposit rate for Hylsa will continue to be 8.31 percent (See Circular Welded Non-Alloy Steel Pipe from Mexico: Final Results of Administrative Review, 63 FR 33041 (June 17, 1998);
(2) For previously reviewed or investigated companies other than Hylsa, the cash deposit rate will continue to be the company-specific rate publish for the most recent period;
(3) If the exporter is not a firm covered in this review, a prior review, or the LTFV investigation, but the manufacturer is, the cash deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; and
(4) If neither the exporter nor the manufacturer is a firm covered in this or any previous review conducted by the Department, the cash deposit rate will be 32.62 percent. See Antidumping Duty Order; Circular Welded Non-Alloy Steel Pipe from Mexico, 57 FR 49453 (November 2, 1992).
This notice also serves as a final reminder to importers of their responsibility under
This notice also serves as a reminder to parties subject to administrative protective orders (APOs) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with
This determination is issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Tariff Act (19 U.S.C. 1675(a)(1) and 1677f(i)(1)).
Dated: January 11, 2000. Robert S. LaRussa, Assistant Secretary for Import Administration.
FR Doc. 00-2849Filed2-7-00; 8:45 amBILLING CODE 3510 -DS-P
Sponsored links
This document cites
ver las páginas en versión mobile | web
ver las páginas en versión mobile | web
© Copyright 2012, vLex. All Rights Reserved.
Contents in vLex United States
Explore vLex
For Professionals
For Partners
Company
Other documents:
Priest Pleads Not Guilty to Child Porn Charges | two schindler technologies selected by architectural products for first annual 'product innovation award'. | Donald B Oren | St. Albans Man Killed by Train Identified | Sentenza nº 290 de Tribunali Amministrativi Regionali, Toscana, T.A.R. - Toscana - Firenze, January 25, 2005 | Ordinanze Collegiali nº 1687 de Tribunali Amministrativi Regionali, Lazio, T.A.R. - Lazio - Roma, December 12, 2005 | Decreti Decisorio nº 7154 de Tribunali Amministrativi Regionali Lazio T.A.R - Lazio Roma Augus... | Sentenza nº 1259 de Tribunali Amministrativi Regionali, Campania, T.A.R. - Campania - Napoli, January 31, 2006