Federal Register: November 2, 2005 (Volume 70, Number 211)Proposed RulesPage 66307-66314From the Federal Register Online via GPO Access [wais.access.gpo.gov]
FEDERAL TRADE COMMISSION
16 CFR Part 305
Rule Concerning Disclosures Regarding Energy Consumption and Water Use of Certain Home Appliances and Other Products Required Under the Energy Policy and Conservation Act (``Appliance Labeling Rule'')
AGENCY: Federal Trade Commission (FTC or Commission).
ACTION: Advance notice of proposed rulemaking; request for comment.
SUMMARY: Section 137 of the Energy Policy Act of 2005 requires the Commission to conduct a rulemaking to examine the effectiveness of current energy efficiency labeling requirements for consumer products issued pursuant to the Energy Policy and Conservation Act. In response to that directive, the Commission is seeking comments on the effectiveness of the Appliance Labeling Rule and suggestions for improvements to the energy labeling program. The Commission is also requesting comments about the overall costs and benefits of the Rule and its overall regulatory and economic impact as a part of the Commission's systematic review of all its regulations and guides.
DATES: Comments must be received by January 13, 2006.
ADDRESSES: Interested parties are invited to submit written comments. Comments should refer to ``Energy Labeling, Project No. R511994'' to facilitate the organization of comments. A comment filed in paper form should include this reference both in the text and on the envelope, and should be mailed to the following address: Federal Trade Commission/ Office of the Secretary, Room H-135 (Annex O), 600 Pennsylvania Avenue, NW., Washington, DC 20580. The FTC is requesting that any comment filed in paper form be sent by courier or overnight service, if possible, because U.S. postal mail in the Washington area and at the Commission is subject to delay due to heightened security precautions. Comments containing confidential material must be filed in paper form, must be clearly labeled ``Confidential,'' and must comply with Commission Rule 4.9(c).\1\
\1\ The comment must be accompanied by an explicit request for confidential treatment, including the factual and legal basis for the request, and must identify the specific portions of the comment to be withheld from the public record. The request will be granted or denied by the Commission's General Counsel, consistent with applicable law and the public interest. See 16 CFR 4.9(c).
Comments filed in electronic form should be submitted by clicking on the following Web link: https://secure.commentworks.com/ftc-energylabeling and following the instructions on the Web-based form. To
ensure that the Commission considers an electronic comment, you must file it on the Web-based form at the https://secure.commentworks.com/ftc-energylabeling Web link. You may also visit http://
http://www.regulations.gov to read this advance notice of proposed rulemaking,
and may file an electronic comment through that Web site. The Commission will consider all comments that regulations.gov forwards to it.
The FTC Act and other laws the Commission administers permit the collection of public comments to consider and use in this proceeding as appropriate. All timely and responsive public comments received by the Commission, whether filed in paper or in electronic form, will be considered by the Commission, and will be available to the public on the FTC Web site, to the extent practicable, at http://www.ftc.gov. As
FOR FURTHER INFORMATION CONTACT: Hampton Newsome, Attorney, (202) 326- 2889, Division of Enforcement, Federal Trade Commission, 601 New Jersey Avenue, NW., Washington, DC 20580.
I. Energy Policy Act of 2005
Section 137 of the Energy Policy Act of 2005 amends the Energy Policy and Conservation Act of 1975 (EPCA) \2\ to require the Commission to initiate a rulemaking to consider ``the effectiveness of the consumer products labeling program in assisting consumers in making purchasing decisions and improving energy efficiency.'' As part of this effort, the Act directs the Commission to consider ``changes to the labeling rules (including categorical labeling) that would improve the effectiveness of consumer product labels.'' The Act gives the Commission 90 days to initiate the rulemaking and two years to complete it. To implement this directive, the Commission is seeking comments on the effectiveness of the FTC's energy labeling regulations for consumer products, generally referred to as the Appliance Labeling Rule (16 CFR part 305).
\2\ 42 U.S.C. 6291 et seq.
II. Energy Policy and Conservation Act Labeling Requirements
Section 324 of EPCA requires the FTC to prescribe labeling rules for the disclosure of estimated annual energy cost or alternative energy consumption information for a variety of products covered by the statute, including home appliances (e.g., refrigerators, dishwashers, air conditioners, and furnaces), lighting, and plumbing products.\3\ EPCA requires that labels for covered appliances disclose the estimated annual operating cost of such products, as determined by the Department of Energy (DOE) test procedures (42 U.S.C. 6294(c)).\4\ The Commission, however, may require a different measure of energy consumption if DOE determines that the cost disclosure is not technologically feasible, or the Commission determines such a disclosure is not likely to assist consumers in making purchasing decisions or is not economically feasible. Section 324(c) also requires that the label contain information about the range of estimated annual operating costs (or energy consumption) for covered products. The Commission may also require the disclosure of energy information found on the label in any printed material displayed or distributed at the point of sale. In addition, the Commission may direct manufacturers to provide additional energy-related disclosures on the label (or information shipped with the product) including instructions for the maintenance, use, or repair of the covered product.
\3\ 42 U.S.C. 6294. For most appliance products, the Commission must prescribe labeling rules unless it determines that labeling is not technologically or economically feasible (42 U.S.C. 6294(a)(1)). For central air conditioners, heat pumps, furnaces, and clothes washers, the statute requires labeling unless the Commission finds that labeling is not technologically or economically feasible or is not likely to assist consumers in making purchasing decisions (42 U.S.C. 6294(a)(2)(A)). Pursuant to Sec. 6294(a)(1), the Commission determined not to require labeling for television sets, kitchen ranges, ovens, clothes dryers, humidifiers, dehumidifiers, and certain home heating equipment other than furnaces. See 44 FR 66466, 66468-66469 (Nov. 19, 1979).
\4\ Section 323 of EPCA (42 U.S.C. 6293) directs DOE to develop test procedures for major household appliances. Manufacturers must follow these test procedures to determine their products' compliance with DOE's energy conservation standards (required by Sec. 325 of EPCA), and to derive the energy consumption or efficiency values to put on required labels.
III. FTC's Appliance Labeling Rule
The Commission's Appliance Labeling Rule implements the requirements of EPCA by directing manufacturers to disclose energy information about major household appliances. This information enables consumers to compare the energy use or efficiency of competing models.\5\ When initially published in 1979,\6\ the Rule applied to eight appliance categories: refrigerators, refrigerator-freezers, freezers, dishwashers, water heaters, clothes washers, room air conditioners, and furnaces. Since then, the Commission has expanded the Rule's coverage to include central air conditioners, heat pumps, fluorescent lamp ballasts, plumbing products, lighting products, and pool heaters and some other types of water heaters.\7\
\5\ More information about the Rule can be found at http://www.ftc.gov/appliances .
\6\ 44 FR 66466 (Nov. 19, 1979).
\7\ See 52 FR 46888 (Dec. 10, 1987) (central air conditioners); 59 FR 49556 (Sept. 28, 1994) (pool heaters); 54 FR 28031 (July 5, 1989) (fluorescent lamp ballasts); 58 FR 54955 (Oct. 25, 1993) (certain plumbing products); and 59 FR 25176 (May 13, 1994) (lighting products).
Under the Rule, manufacturers must disclose specific energy consumption or efficiency information about their products at the point of sale in the form of an ``EnergyGuide'' label affixed to each unit. The information on the EnergyGuide label also must appear in catalogs and on internet sites from which covered products can be ordered. The Rule directs manufacturers to derive the information from standardized tests issued by DOE.
Required labels for appliances must also include a ``range of comparability'' (published by the Commission) that shows the highest and lowest energy consumption or efficiencies for all similar appliance models. These ranges of comparability are intended to help consumers determine how a specific model compares to others available in the market. Labels for most appliances must provide the product's estimated annual operating cost. Manufacturers must calculate these costs using national average cost figures for energy (e.g., electricity, natural gas, etc.) published by DOE. In addition to the required EnergyGuide labels, manufacturers of furnaces, central air conditioners, and heat pumps must provide cost information for their products in either fact sheets or an industry directory.
The Rule contains very specific requirements for the content and format of the EnergyGuide labels. Manufacturers cannot place any information on the label other than that
[Page 66309]specifically allowed by the Rule. In 2000, the Commission issued an exemption allowing manufacturers to include the ``Energy Star'' logo on the EnergyGuide label for covered appliances (65 FR 17554 (Apr. 30, 2000)). Energy Star is a voluntary labeling program that identifies high efficiency products. The Environmental Protection Agency (EPA) and DOE administer the Energy Star program.\8\
\8\ See http://www.energystar.gov.
The Commission's Rule contains certain reporting requirements which direct manufacturers for most covered products to file reports with the FTC annually and when they begin manufacturing new models. These reports must contain the estimated annual energy consumption or energy efficiency ratings for the appliances derived from tests performed pursuant to the DOE test procedures (16 CFR 305.8(b)). Pursuant to section 305.10, the Commission publishes new ranges of comparability if an analysis of the new information indicates that the upper or lower limits of the ranges have changed by more than 15%. Otherwise, the Commission publishes a statement each year that the prior ranges remain in effect for the next year.
The Rule has different labeling requirements for consumer products other than appliances (see 16 CFR 305.11(d), (e), & (f)). For example, manufacturers of fluorescent lamp ballasts and certain tube-type fluorescent bulbs must disclose an encircled ``E'' on ballasts and on luminaires containing ballasts, as well as on packaging. The ``E'' signifies compliance with DOE minimum efficiency standards. Manufacturers of showerheads, faucets, toilets, and urinals must disclose water usage information on the products, packaging and labeling. Manufacturers of certain incandescent bulbs, spot and flood bulbs, and screw-base compact fluorescent bulbs must disclose, on packaging, the light output in lumens, energy used in watts, voltage, average life, and number of bulbs. They also must explain how purchasers can select the most energy efficient bulb for their needs.
IV. Issues and Questions for Comment
As directed by the Energy Policy Act of 2005, the Commission is publishing this notice to seek comment on the effectiveness of the current appliance labeling requirements. The Commission has outlined below some specific issues and questions related to the current labeling program. These issues include the overall effectiveness of existing labeling requirements, the need for a new label design, and the benefits and costs of alternative label formats. The Commission is also seeking comments on other issues such as the energy descriptors used on current labels and energy disclosures for products not generally sold in showrooms. The Commission invites interested persons to submit written comments on any issue of fact, law or policy that may bear upon the FTC's current labeling requirements. All comments should be filed as prescribed in the ADDRESSES section above, and must be received on or before January 13, 2006. After examining the comments received, the Commission will determine whether to propose for comment any specific amendments to the current requirements.
A. Effectiveness of Labeling Program
The original EnergyGuide label created by the Commission in 1979 contained three energy-related disclosures for most covered products: (1) The estimated annual operating cost of the model, (2) the range of operating costs for similar models displayed in the form of a bar graph, and (3) a grid which provided the operating cost of the model at different energy costs. In 1994, the Commission revised the label so that energy use or efficiency (as opposed to operating cost) appears as the primary descriptor on the label.\9\ The revised labels continued to display cost information (for most products), but the cost figures were moved to the bottom half of the label. As part of the 1994 review of the Rule, the Commission conducted consumer research and made certain format changes to the EnergyGuide label as a result. These changes enhanced the appearance of the range and bar graph on the label in an effort to reduce consumer confusion (see Figure 1). The Commission has not conducted any consumer research about the effectiveness of the label or alternative formats since adopting those changes in 1994, and the same EnergyGuide label has been in use since that time.
\9\ The Commission concluded that the use of operating cost as the primary descriptor was not likely to assist consumers. It found, among other things, that changes in national average energy costs necessitated frequent changes to ranges of comparability which, in turn, could yield inconsistent cost information in showrooms. See 53 FR 22106, 22110 (Jun. 13, 1988) and 58 FR 12818, 12827 (Mar. 5, 1993).
In August 2002, the American Council for an Energy Efficient Environment (ACEEE) released a report that summarized research it had conducted on the EnergyGuide label's efficacy.\10\ The research included manufacturer and consumer interviews, consumer focus groups, a mall intercept survey, and a simulated shopping experiment. According to ACEEE's report, the interviews and focus groups suggested that consumers are familiar with the EnergyGuide but their use of the label appears to be low. According to these interviews and focus groups, consumers found the label to be overly ``wordy, cluttered, and complex.'' ACEEE concluded that the EnergyGuide ``can be redesigned to improve consumer comprehension, encourage wider use of the label, and motivate consumers to consider energy use when purchasing a labeled appliance.'' \11\
\10\ Thorne, Jennifer and Egan, Christine, ``An Evaluation of the Federal Trade Commission's EnergyGuide Label: Final Report and Recommendations,'' ACEEE, August 2002 [hereinafter ``ACEEE 2002 Report'']. The Report was funded in part by DOE, EPA, and other organizations. It is available online at http://aceee.org/pubs/a021full.pdf. The Commission has not determined what, if any,
reliance it will place on the ACEEE's report (or any other labeling study) during this proceeding.
\11\ Id. at v-vi.
ACEEE's 2002 report also examined several different formats and graphical elements for the EnergyGuide label. The ACEEE report considered various categorical labels (i.e., those using a step ranking system such as stars or letters to indicate relative energy use) and continuous labels (i.e., those containing a bar graph or similar item which displays information on a continuous scale without discrete ranks or categories). Among other things, the report recommended the adoption of a ``categorical'' label based on a star system (e.g., one to five stars). Various types of categorical labels are used in Europe, Australia, Brazil, Thailand, and other countries (see sample European Label at Figure 2).\12\ According to ACEEE, the research suggested that categorical labels ``are easy to use and quick to decipher.'' Of the continuous label designs considered, ACEEE found that the bar graph with visible marks denoting the graph's scale ``appears most promising.'' \13\ ACEEE's report found that most consumers preferred categorical labels over bar graphs and other ``continuous'' label designs.
\12\ See Wiel, Stephen, and McMahon, James E., ``Energy- Efficiency Labels and Standards: A Guidebook for Appliances, Equipment, and Lighting, 2nd Edition,'' Collaborative Labeling and Appliance Standards Program (CLASP), 2005.
\13\ The ACEEE report contains a sample label with such a bar graph (pp. vi and 27-28) in addition to many other sample labels featuring various bar graph and categorical designs. See http://aceee.org/pubs/a021full.pdf .
To facilitate the Commission's efforts to consider the effectiveness of the
[Page 66310]existing labeling program, we request that commenters consider the following questions: \14\
\14\ Where appropriate, the Commission requests enough detail about data, study design, statistical analysis, and findings to enable the FTC to understand the methodology that was used to conduct the analysis.
1. Do any recent reports, studies, or research provide data with which to estimate the benefits and costs of current consumer appliance energy labeling programs in the United States? In particular, have any such studies examined the effectiveness of the EnergyGuide label and alternative formats and approaches? Are there any recent studies from other countries that would be helpful for the Commission to consider?
2. How should the Commission measure the ``effectiveness'' of the appliance labeling program ``in assisting consumers in making purchasing decisions''? For example, should effectiveness be measured by consumer comprehension of specific label elements, consumer preference for different labels, the impact of labels on product choice, or other means?
3. How effective is the EnergyGuide label in providing consumers with useful, accurate information about the energy consumption or energy efficiency of covered products? What is the net benefit of the current EnergyGuide labels? Can appliance energy labels be modified to increase the net benefits of consumer energy labeling programs in the United States?
4. What is the effectiveness of the current EnergyGuide label in improving energy efficiency?
5. What has been the impact of the Energy Star program on the effectiveness of the EnergyGuide label and its usefulness for consumers?
6. Would changes to the current label design and format significantly improve or have a significant impact upon the effectiveness of the labels? How is the effectiveness of the EnergyGuide label affected by factors unrelated to label design (e.g., consumer priorities)?
7. What changes, if any, should be made to the current appearance of the EnergyGuide label (content, size, format, color, graphical presentation, etc.)?
8. Should the FTC change the EnergyGuide label to require a categorical design such as a star based label? Would a categorical design yield benefits for consumers? What would be the costs of implementing a categorical label system? How would the benefits of such a system compare to the costs?
9. Do commenters have views about the design, methodology, conclusions, or other aspects of the ACEEE 2002 report?
10. Would a categorical label design significantly improve energy efficiency? Would consumers interpret a categorical label as an indicia of product quality instead of energy performance or efficiency?
11. What criteria would the FTC need to use to assign a star rating to various models in specific product categories (i.e., criteria for a product to receive five stars, one star, etc.)? Would the stars be based on the DOE minimum efficiency standards, the range of energy consumption for models in a particular class, or some other measure? How would a star-based categorical label depict the required ranges? For example, would the lowest rating (i.e., one star) apply to the least efficient products in a product class category regardless of the number of products in the class and the efficiency of those products relative to DOE standards?
12. Would a categorical label require the FTC to make judgments about the relative energy efficiency of products in the market? If so, what information would the Commission need to make such judgments? How would it obtain the necessary information? What would be the costs of making such determinations?
13. Would a star based EnergyGuide label be duplicative of the Energy Star program? Would the star based label cause consumer confusion given the existence of the Energy Star program?
14. Section 305.19 of the Rule contains an exemption which allows manufacturers to place the Energy Star logo on the EnergyGuide label for qualified products. Under the exemption, the Energy Star logo must be placed ``above the comparability bar in the box that contains the applicable range of comparability.''
Should the Commission consider changes to that exemption (e.g., changes to the placement of the logo on the label)?
15. In addition to considering the categorical label as required by the Energy Policy Act of 2005, should the Commission consider other formats or graphical representations for the EnergyGuide label? Are there improvements that can be made to the current bar graph design in the EnergyGuide label?
B. Energy Descriptors For Various Products
Currently, EnergyGuide labels for most products provide information on the energy use (or efficiency) of the model, the range of energy use (or efficiency) in the market, and an estimated annual operating cost. The product labels display different energy information depending on the product. For example, refrigerator labels contain energy use information in the form of kilowatt-hours per year while room air conditioners display energy efficiency information through an Energy Efficiency Ratio (EER). In addition, labels for central air conditioning units, heat pumps, furnaces, and pool heaters do not contain cost information.
To aid the Commission in considering possible Rule changes for this issue, we request that commenters consider the following questions:
1. Are the current energy descriptors understandable to consumers? What changes, if any, should be made to the energy descriptors used on the EnergyGuide label?
2. Should the FTC consider requiring estimated annual operating costs as the primary descriptor on EnergyGuide labels in lieu of energy consumption or energy efficiency information? What are the costs and benefits of requiring operating costs as the primary descriptor?
3. Should the Commission consider different energy descriptors for existing products? For instance, should the clothes washer label disclose the model's efficiency rating using the measure currently required by DOE (the ``Modified Energy Factor'') instead of the product's annual energy consumption?
C. Disclosures for Central Air Conditioning, Heat Pumps, and Furnaces
The Commission is also interested in current labeling requirements for products that generally do not appear in showrooms where consumers can compare labels on competing models. Such products include central air conditioning units, heat pumps, and furnaces.\15\ The Commission seeks comment on whether there are alternatives to labeling that would more effectively communicate energy efficiency information to consumers for such products. Although the Rule requires manufacturers to disclose energy information for these products through means other than labels, such as fact sheets and directories (see 16 CFR 305.11(b)), it is unclear whether such methods provide helpful information for consumers. Fact sheets contain detailed information that may
[Page 66311]not be easy to understand such as cost charts, regional heating and cooling maps, and equations related to the energy performance. In addition, most industry members provide cost information in industry directories instead of preparing fact sheets. It is unclear whether consumers normally consult these industry directories in making their purchasing decisions. To aid the Commission in evaluating these existing requirements, the Commission seeks information on the following questions:
\15\ See, e.g., 44 FR at 66470 (Nov. 19, 1979) (``The majority of furnace purchases are made either in the consumer's home or as part of the consumer's purchase of a home. As a result, few consumers have an opportunity to see a display model before the furnace is installed.'').
1. How do consumers generally receive information about the energy efficiency of central air conditioners, heat pumps, and furnaces?
2. Are EnergyGuide labels on central air conditioners, heat pumps, and furnaces assisting consumers in their purchasing decisions? If not, should the Commission consider an alternative method of ensuring that consumers have access to useful efficiency information for these products?
3. Should the Commission consider changes to the current fact sheet requirements for central air conditioners, heat pumps, and furnaces?
4. Are there any alternative or additional forms of information (such as brochures, catalogs, or information sheets) that the FTC could require at the point of sale that would help consumers in making their purchasing decisions for these products?
D. Reporting Requirements
Section 326(b) of EPCA requires manufacturers to notify the Commission of new models they produce and also directs them to file an annual report with energy consumption information about their products. The annual report information is available on the FTC Web site at http://www.ftc.gov/appliancedata. To aid the Commission in considering
possible changes to the Rule's reporting requirements, we request that commenters consider the following questions:
1. What changes, if any, should be made to the specific information covered by existing reporting requirements in the Rule? Would such changes improve the effectiveness of the labeling program for consumers?
2. Is there additional product information that the FTC should require, consistent with its statutory authority, in reports from manufacturers? What are the costs and benefits of requiring such additional information? Are there reporting requirements that the FTC should eliminate from the Rule (consistent with current statutory requirements)?
E. Annual Revisions to the Ranges of Comparability
As discussed above, the EnergyGuide label must contain a range of comparability that shows the highest and lowest energy consumption or efficiencies for all similar appliance models. EPCA does not specify when the Commission must change the ranges, but states it cannot do so ``more often than annually.'' 42 U.S.C. 426(c). The Commission's regulations indicate that the FTC will revise ranges annually, if appropriate (16 CFR 305.10). For some products, such as dishwashers, the Commission has changed the applicable ranges several times over the last few years. When the Commission changes the ranges, manufacturers must amend their labels to reflect the new ranges and update the operating costs on the labels using a new national average cost of electricity. Frequent range changes can cause the labels on different models in the same showroom to display inconsistent range and cost information because the models on display may have been manufactured at different times. This may be confusing to consumers. Frequent range revisions also impose a burden on manufacturers because they must change their product labels. To aid the Commission in considering possible Rule changes for this issue, we request that commenters consider the following questions:
1. Are changes in the energy use of products in the market significant enough to warrant an examination of the ranges of comparability every year?
2. Should the Commission consider amending the Rule so that the FTC examines the comparability ranges less often than annually? If so, how often should the Commission examine the ranges? Would such a change affect the effectiveness of the labeling program?
3. Are there ways to alleviate potential consumer confusion caused when certain product labels display new range and cost information and other models in the same showroom have labels displaying old range and cost information?
F. Lighting and Plumbing Products
What changes, if any, should be made to existing labeling requirements for lighting and plumbing products in 16 CFR part 305? What are the costs and benefits of any proposed labeling changes for lighting and plumbing products?
V. Regulatory Review
The Commission conducts scheduled reviews of its rules and guides in an effort to seek information about their costs and benefits and regulatory and economic impact. The regulatory review of the Appliance Labeling Rule had been scheduled for 2008. The Commission is combining that scheduled regulatory review with the present rulemaking required by the Energy Policy Act of 2005. Accordingly, in addition to the specific questions listed above, the Commission is also soliciting general comments on, among other things, the economic impact of and the continuing need for the Rule; possible conflicts between the Rule and State, local, or other Federal laws; and the effect on the Rule of any technological, economic or other industry changes.
The Commission is interested in receiving data, surveys and other empirical evidence to support comments submitted in response to this notice. As part of the regulatory review, the Commission is particularly interested in receiving comments and supporting data in response to the following questions:
(A) What benefits, if any, has the Rule provided to consumers of products covered by the Rule?
(B) What changes, if any, should be made to the Rule to increase the benefits of the Rule to consumers? How would these changes affect the costs the Rule imposes on industry members?
(C) What significant burdens or costs, if any, including costs of compliance, has the Rule imposed on industry members subject to its requirements? Has the Rule provided benefits to such industry members?
(D) What changes, if any, should be made to the Rule to reduce the burdens or costs imposed on industry members subject to its requirements? How would these changes affect the benefits provided by the Rule?
(E) Does the Rule overlap or conflict with other Federal, State, or local laws or regulations?
(F) Since the Rule was issued, what effects, if any, have changes in relevant technology or economic conditions had on the Rule?
(G) What significant burdens or costs, if any, including costs of compliance, has the Rule imposed on small businesses subject to its requirements? How do these burdens or costs differ from those imposed on larger businesses subject to the Rule's requirements?
(H) What changes, if any, should be made to the Rule to reduce the burdens or costs imposed on small businesses? How would these changes affect the benefits of the Rule? Would such changes adversely affect the competitive position of larger businesses?
(I) Are there any other costs or benefits associated with the Rule?
List of Subjects in 16 CFR Part 305
Advertising, Consumer protection, Energy conservation, Household appliances, Labeling, Lamp products, Penalties, Reporting and recordkeeping requirements. BILLING CODE 6750-01-P
[GRAPHIC] [TIFF OMITTED] TP02NO05.061
[GRAPHIC] [TIFF OMITTED] TP02NO05.062
By direction of the Commission. Donald S. Clark, Secretary.
FR Doc. 05-21817 Filed 11-1-05; 8:45 amBILLING CODE 6750-01-C
This document cites
- US Code - Title 42: The Public Health and Welfare - 42 USC 6294 - Sec. 6294. Labeling
- US Code - Title 42: The Public Health and Welfare - 42 USC 6293 - Sec. 6293. Test procedures
- US Code - Title 42: The Public Health and Welfare - 42 USC 6291 - Sec. 6291. Definitions
- US Code - Title 42: The Public Health and Welfare - 42 USC 426 - Sec. 426. Entitlement to hospital insurance benefits
- Code of Federal Regulations - Title 16: Commercial Practices - 16 CFR 4.9 - The public record.
See other documents that cite the same legislation