Certain New Chemicals; Receipt and Status Information

Text

---

Federal Register: June 9, 2010 (Volume 75, Number 110)

Notices

Page 32754-32760

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

DOCID:fr09jn10-46

ENVIRONMENTAL PROTECTION AGENCY

EPA-HQ-OPPT-2010-0408; FRL-8825-5

Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of

TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from March 1, 2010 to April 23, 2010, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES: Comments identified by the specific PMN number or TME number, must be received on or before July 9, 2010.

ADDRESSES: Submit your comments, identified by docket identification

(ID) number EPA-HQ-OPPT-2010-0408, by one of the following methods:

Federal eRulemaking Portal: http://www.regulations.gov.

Follow the on-line instructions for submitting comments.

Mail: Document Control Office (7407M), Office of Chemical

Safety and Pollution Prevention (OPPT), Environmental Protection

Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

Hand Delivery: OPPT Document Control Office (DCO), EPA

East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC.

Attention: Docket ID Number EPA-HQ-OPPT-2010-0408. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930. Such deliveries are only accepted during the DCO's normal hours of operation, and special arrangements should be made for deliveries of boxed information.

Instructions: Direct your comments to docket ID number EPA-HQ-OPPT- 2010-0408. EPA's policy is that all comments received will be included in the docket without change and may be made available on-line at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be

Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e- mail. The regulations.gov website is an ``anonymous access'' system, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e- mail comment directly to EPA without going through regulations.gov, your e-mail address will be automatically captured and included as part of the comment that is placed in the docket and made available on the

Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD-ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.

Docket: All documents in the docket are listed in the docket index available at http://www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket. The OPPT Docket is located in the EPA

Docket Center (EPA/DC) at Rm. 3334, EPA West Bldg., 1301 Constitution

Ave., NW., Washington, DC. The EPA/DC Public Reading Room hours of operation are 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is (202) 566-1744, and the telephone number for the OPPT Docket is

(202) 566-0280. Docket visitors are required to show photographic identification, pass through a metal detector, and sign the EPA visitor log. All visitor bags are processed through an X-ray machine and subject to search. Visitors will be provided an EPA/DC badge that must be visible at all times in the building and returned upon departure.

FOR FURTHER INFORMATION CONTACT: For technical information contact:

Bernice Mudd, Information Management Division (7407M), Office of

Chemical Safety and Pollution Prevention Environmental Protection

Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 564-8951; fax number: (202) 546-8955; e-mail address: mudd.bernice@epa.gov.

For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the

Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. What Should I Consider as I Prepare My Comments for EPA? 1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or

CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket.

Page 32755

Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. 2. Tips for preparing your comments. When submitting comments, remember to: i. Identify the document by docket ID number and other identifying information (subject heading, Federal Register date and page number). ii. Follow directions. The Agency may ask you to respond to specific questions or organize comments by referencing a Code of

Federal Regulations (CFR) part or section number. iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes. iv. Describe any assumptions and provide any technical information and/or data that you used. v. If you estimate potential costs or burdens, explain how you arrived at your estimate in sufficient detail to allow for it to be reproduced. vi. Provide specific examples to illustrate your concerns and suggest alternatives. vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats. viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture

(defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from March 1, 2010 to April 23, 2010, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs, both pending or expired, and the notices of commencement to manufacture a new chemical that the

Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the

PMN; the date the PMN was received by EPA; the projected end date for

EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 100 Premanufacture Notices Received From: 03/01/10 to 04/23/10

Projected Notice End

Case No.

Received Date

Date

Manufacturer/Importer

Use

Chemical

P-10-0253

03/01/10

05/29/10

CBI

(G) Thermoset molding (G) Methacrylate compound;

ester capped

Nondispersive use

aromatic ether polymer

P-10-0254

03/01/10

05/29/10

Piedmont Chemical

(S) Ultra violet

(S) 2-propenoic acid,

Industries I, LLC.

curable wood

2-methyl-, 2- coatings; ultra

hydroxyethyl ester, violet curable metal reaction products coatings

with dicyclopentadiene, 5- isocyanato-1-

(isocyanatomethyl)- 1,3,3- trimethylcyclohexane

, maleic anhydride and 2-methyl-1,3- propanediol

P-10-0255

03/01/10

05/29/10

Piedmont Chemical

(S) Ultra violet

(S) 2-propenoic acid,

Industries I, LLC

curable wood

2-hydroxyethyl coatings; ultra

ester, reaction violet curable metal products with coatings

dicyclopentadiene, 5- isocyanato-1-

(isocyanatomethyl)- 1,3,3- trimethylcyclohexane

, maleic anhydride and 2-methyl-1,3- propanediol

P-10-0256

03/01/10

05/29/10

CBI

(S) Coupling agent

(S) Titanium, Bu alc. for plastics;

2-ethyl-1-hexanol coupling agent for

oleate stearate rubbers

complexes

P-10-0257

03/01/10

05/29/10

CBI

(S) Polyurethane

(S) 1,4-butanediol, elastomer

polymer with 2,4- diisocyanato-1- methylbenzene and

.alpha.-hydro-

.omega.- hydroxypoly[oxy(meth yl-1,2-ethanediyl)]

P-10-0258

03/01/10

05/29/10

CBI

(G) Pigment additive (G) Sulfonated heteropolycycle

P-10-0259

03/01/10

05/29/10

CBI

(G) Pigment additive (G) Sulfonated heteropolycycle

P-10-0260

03/02/10

05/30/10

H.B. Fuller

(G) Industrial

(G) Isocyanate- adhesive

functional polyurethane prepolymer

P-10-0261

03/02/10

05/30/10

H.B. Fuller

(G) Industrial

(G) Isocyanate- adhesive

functional polyurethane prepolymer

P-10-0262

03/02/10

05/30/10

Piedmont Chemical

(S) Ultra violet

(S) Fatty acids, C18-

Industries I, LLC

curable inks

unsaturated, dimers, hydrogenated, bi[3-

(1-oxo-2-propen-1- yl)oxy

-2,2-bis[(1- oxo-2-propen-1- yl)oxy]methyl]propyl

] esters

P-10-0263

03/04/10

06/01/10

Marubeni Specialty

(G) Polymeric

(G) Substituted

Chemicals Inc.

component

cyclomethacrylate

P-10-0264

03/04/10

06/01/10

CBI

(G) Monomer

(G) Methacrylate ester of fatty alcohol alkoxylate

Page 32756

P-10-0265

03/04/10

06/01/10

CBI

(S) Coatings for car (G) leather; water borne Hexamethylenediisocy industrial coatings anate homopolymer, like wood

alkyl-oxy-terminated

P-10-0266

03/04/10

06/01/10

CBI

(S) Antioxidant for

(G) Propanoic acid, plastic articles

alkylthio, (1,1- dimethylethyl) -

alkyl-4-hydroxy-2- alkylphenyl thio]alk ylphenyl ester

P-10-0267

03/05/10

06/02/10

CBI

(G) Laundry detergent (G) Acrylate component

copolymer

P-10-0268

03/05/10

06/02/10

CBI

(G) Laundry detergent (G) Acrylate component

copolymer

P-10-0269

03/09/10

06/06/10

CBI

(S) Extrusion of

(G) Polymer of tubing systems;

aromatic injection molding of dicarboxylic acid special applications and alkane diamine

P-10-0270

03/10/10

06/07/10

CBI

(G) Raw material

(G) Aromatic polyester

P-10-0271

03/12/10

06/09/10

CBI

(G) Material for

(G) Alkyl electronic parts

bis(methoxymethyl)hy drocarbomocycle

P-10-0272

03/10/10

06/07/10

Robertet, Inc.

(S) As an odoriferous (S) Oils, Macrocystis component of

pyrifera fragrance compounds

P-10-0273

03/12/10

06/09/10

CBI

(G) Treatment for

(G) textiles

Perfluoroalkylethyl methacrylate copolymer

P-10-0274

03/12/10

06/09/10

CBI

(G) Adhesive

(G) 1,1'- component

methylenebis[isocyan atobenzene], polymer with polyester polyols and a polyether polyol

P-10-0275

03/15/10

06/12/10

CBI

(G) Material for

(G) Substituted electronic parts

polyhydro-oxo- naphthalene sulfonate with alkylidene polycarbomonocycle

P-10-0276

03/15/10

06/12/10

CBI

(G) Antiswelling

(G) Polyethylene agent for clay

polyammonium salt

P-10-0277

03/15/10

06/12/10

CBI

(G) Material for

(G) [5,5'- electronic parts

biisobenzofuran]- 1,1',3,3'-tetrone, polymer with 1,4- benzenediamine, 4,4'- oxybis[benzenamine] and alkylaminosiloxane

P-10-0278

03/15/10

06/12/10

CBI

(G) Material for

(G) Polycarbomono electronic parts

cyclic sulphonium camphosulphonate

P-10-0279

03/15/10

06/12/10

CBI

(G) Material for

(G) Substituted electronic parts

polyhydro-oxo- naphthalene sulfonate with alkylidyne polycarbomocycle

P-10-0280

03/15/10

06/12/10

CBI

(G) Adhesion

(G) Aluminum B- promoter, corrosion alanine complex inhibitor

P-10-0281

03/17/10

06/14/10

CBI

(G) Component of foam (G) Fatty acid polymer with aliphatic diol and aromatic diacid

P-10-0282

03/17/10

06/14/10

CBI

(G) Component in

(G) Maleated nylon injection molded

graft copolymer parts

P-10-0283

03/17/10

06/14/10

CBI

(G) Component in

(G) Maleated nylon injection molded

graft copolymer parts

P-10-0284

03/17/10

06/14/10

CBI

(G) Chemical

(G) Boron ester intermediate

P-10-0285

03/17/10

06/14/10

Syngenta Crop

(S) Intermediate

(S) Benzoic acid, 3-

Protection, Inc.

amino-2-mercapto-

P-10-0286

03/19/10

06/16/10

Instrumental polymer (G) Resin for

(G) Hydroxyl- technologies, LLC.

coatings

terminated aliphatic polycarbonate

P-10-0287

03/19/10

06/16/10

Instrumental Polymer (G) Resin for

(G) Hydroxyl-

Technologies, LLC.

coatings

terminated aliphatic polycarbonate

P-10-0288

03/19/10

06/16/10

Instrumental Polymer (G) Resin for

(G) Hydroxyl-

Technologies, LLC.

coatings

terminated aliphatic polycarbonate

P-10-0289

03/18/10

06/15/10

Instrumental Polymer (G) Resin for

(G) Hydroxyl-

Technologies, LLC.

coatings

terminated aliphatic polycarbonate

P-10-0290

03/22/10

06/19/10

Reichhold, Inc.

(S) Base resin for

(G) Methacrylate gel coat compounds

terminated polyester

(used in FRP applications)

P-10-0291

03/23/10

06/20/10

FRX Polymers, Inc.

(G) FRX phosphonate

(S) CA index name of oligomer is a non-

respective polymer: halogenated flame

Phosphonic acid, p- retardant additive

methyl-, diphenyl that addresses the

ester, polymer with need to replace

4,4'(1methylethylide current commercial

ne)bis[phenol] bromide-containing flame retardant additives that are being phased out due to environmental regulation. Flame retardants are required to meet fire safety standards in order to reduce flammability of combustible materials.

P-10-0292

03/23/10

06/20/10

CBI

(G) Lubricant oil

(G) Alkanoic acid, additive

mixed esters with dipentaerythritol and pentaerythritol

P-10-0293

03/23/10

06/20/10

CBI

(G) Additive

(G) Methacrylate copolymer

Page 32757

P-10-0294

03/24/10

06/21/10

Scott bader, Inc.

(G) Resin or resin

(G) Unsaturated additive

urethane acrylate

P-10-0295

03/25/10

06/22/10

CBI

(G) Component of foam (G) Fattay acid polymer with aliphatic diol and aromatic diacid

P-10-0296

03/26/10

06/23/10

3M

(G) Fluorinated

(G) Fluorinated chemical

carboxylic acid intermediate

P-10-0297

03/26/10

06/23/10

3M

(G) Fluorinated

(G) Fluorinated chemical

alcohol intermediate

P-10-0298

03/26/10

06/23/10

3M

(G) Fluorinated

(G) Fluorinated intermediate

carboxylate ester

P-10-0299

03/26/10

06/23/10

3M

(G) Fluorinated

(G) intermediate

Perfluoroalkoxyalkyl vinyl ether

P-10-0300

03/26/10

06/23/10

3M

(G) Fluorinated

(G) Fluorinated emulsifier

surfactant

P-10-0301

03/25/10

06/22/10

Robertet, Inc.

(S) As an odoriferous (S) Oils, laminaria component of

digitata fragrance compounds

P-10-0302

03/29/10

06/26/10

CBI

(G) Destructive use

(G) Fatty acid amine in fuels

salt

P-10-0303

03/30/10

06/27/10

CBI

(G) Constituent in

(G) Heterocycle, ink formulation

disubstituted, salt with anion (1:1)

P-10-0304

03/30/10

06/27/10

CBI

(S) Acid dye for

(G) Product is a coloring anodized

trivalent chrome aluminum

complex of an azo dye

P-10-0305

03/29/10

06/26/10

CBI

(G) Paint component

(S) Acetic acid ethenyl ester, polymer with ethane and methyl 2-methyl- 2-propenoate

P-10-0306

03/30/10

06/27/10

CBI

(S) Binder for car

(G) Unsaturated repair putty

polyester resin

P-10-0307

03/30/10

06/27/10

Dubois Chemicals Inc. (S) Industrial boiler (G) Powdered amine treatment

P-10-0308

03/30/10

06/27/10

Oleon Americas, Inc. (G) Industrial

(S) Fatty acids, hydraulic fluid

C16 18 and C18- unsaturated, mixed esters with adipic acid and trimethylolpropane

P-10-0309

03/30/10

06/27/10

CBI

(S) Acid dye for

(G) Product is a coloring anodized

trivalent chrome aluminum

complex of an azo dye

P-10-0310

03/30/10

06/27/10

Futurefuel Chemical

(S) Monomer in alkyl (S) Glycerol formal 5-

Company

resins; monomer in

hydroxy-1,3-dioxane surfactants solvent; antifreeze in paints and coatings; coalecing aid - inks and coatings

P-10-0310

03/30/10

06/27/10

Futurefuel Chemical

(S) Monomer in alkyl (S) Glycerol formal

Company

resins; monomer in

isomeric mixture of surfactants solvent; 4-hydroxymethyl-1,3- antifreeze in paints dioxolane and coatings; coalecing aid - inks and coatings

P-10-0311

04/01/10

06/29/10

CBI

(S) Release agent

(G) Alkyl alkoxy siloxane

P-10-0312

04/01/10

06/29/10

Akzo Nobel Coatings

(S) Dispersant for

(S) 2,5-furandione,

Inc.

the preparation of

telomer with stir-in pigments in ethenylbenzene and car paints

(1- methylethyl)benzenem imides with polyethylene- polypropylene glycol 2-aminopropyl me ether

P-10-0313

04/01/10

06/29/10

ICI Performance

(S) Opacifying

(S) Diphosphoric

Products LP

pigment for ceramic acid, calcium salt whiteware

(1:1)

P-10-0314

03/23/10

06/20/10

Sasol Chemicals North (S) Printing ink

(S) Aluminum, (2-

America, LLC

component, acts as

butanolato)bis[ethyl- gallant, rheological 3-(oxo-, modifier; for

.kappa.,O)butanoato- industrial use only; ,.kappa.,O']- no known consumer uses

P-10-0315

03/31/10

06/28/10

CBI

(S) Release agent

(G) Me alkyl siloxane

P-10-0316

03/31/10

06/28/10

CBI

(G) Monomer for

(G) Perfluoroalkyl polymer for textile acrylate treatment additive

P-10-0317

03/31/10

06/28/10

CBI

(G) Paper treatment

(G) Fluoroalkyl additive

acrylate copolymer

P-10-0318

04/02/10

06/30/10

3M Company

(S) Dispersant

(G) Propylene oxide ligand

P-10-0319

04/02/10

06/30/10

CBI

(G) Polyamide phenol (G) Aromatic for coatings, open, halogenated acid, non-dispersive use

polymer with a halogenated aromatic diamine and an aromatic phenolic amine

P-10-0320

04/02/10

06/30/10

CBI

(G) Open, non-

(G) Aromatic dispersive use

dianhydride, polymer with an aromatic diamine and an aliphatic unsaturated ester

P-10-0321

04/02/10

06/30/10

CBI

(G) Concrete additive (G) Modified phenol resin

P-10-0322

04/02/10

06/30/10

CBI

(G) Concrete additive (G) Modified phenol resin

P-10-0323

03/15/10

06/12/10

Canon U.S.A., Inc.

(G) Additive for ink (G) Alkyl jet printing ink

methacrylate polymer with branched benzene, alkyl acrylate, hydroxyalkyl methacrylate, methacrylic acid and substituted methacrylate, alkaline metal salt

Page 32758

P-10-0324

04/01/10

06/29/10

CBI

(S) Curing agent or

(G) Urea, N,N'- accelerator for

(methyl-1,3- epoxy resin

phenylene)bis[N',N'- bis[3-

(polyalkyleneamino]-

, compound with formaldehyde polymer with phenol

P-10-0325

04/05/10

07/03/10

The Goodyear Tire and (S) Polymerization

(G) Neodymium ziegler-

Rubber Company

catalyst

natta catalyst

P-10-0326

04/02/10

06/30/10

CBI

(G) Site-limited

(S) Propane, intermediate

1,1,1,2,3,3- hexafluoro-

P-10-0327

04/02/10

06/30/10

CBI

(G) Site-limited

(S) 1-propene, intermediate

1,2,3,3,3- pentafluoro-

P-10-0328

04/05/10

07/03/10

H.B. Fuller

(G) Industrial

(G) 2-propenoic acid, adhesive

2-mehyl-, alkyl ester, polymer with ethenyl acetate, N-

(hydroxymethyl)-2- propenamide, methyl 2-methyl-2- propenoate and alkyl methacrylate

P-10-0329

04/05/10

07/03/10

CBI

(G) Finishing agent

(S) Hexadecanamide, N- for textile goods

3-(hexadecyloxy)-2- hydroxypropyl-N-(2- hydroxyethyl)-

P-10-0330

04/05/10

07/03/10

CBI

(G) Component of

(G) Trimethylpentene fragrance mixture

oxymethylpropyl for highly

ester of dispersive

cyclopropanecarboxyl applications.

ic acid

P-10-0331

04/05/10

07/03/10

Reichhold, Inc.

(S) Carrier resin for (G) Amine salt of coatings

vegetable oil, polymer with hydroxy substituted carboxylic acid, aliphatic diisocyanate, tetra hydroxy alkane and polyol

P-10-0332

04/06/10

07/04/10

CBI

(S) Polyol for rigid (G) Amino alcohol foam

substituted phenol

P-10-0333

04/06/10

07/04/10

CBI

(S) Industrial

(G) 1,4:3,6- monomer to be

dianhydrohexitol-, polymerized or

reaction produc6s reacted.

with chloro- oxopropoxy-benzoic acid and hydroxy- methoxybenzoic acid

P-10-0334

04/06/10

07/04/10

CBI

(S) Industrial

(G) Benzoic acid, monomer to be

(acryloxy)alkoxy-, polymerized or

1,1'- reacted.

(methylphenylene) ester

P-10-0335

04/06/10

07/04/10

CBI

(G) Metal

(G) Polyester type coating(surface

urethane resin treatment)

P-10-0336

04/06/10

07/04/10

CBI

(G) Reactive diluent (G) Acrylated for unsaturated

polyester oligomer polyester and vinyl ester

P-10-0337

04/06/10

07/04/10

CBI

(G) Reactive diluent (G) Methacrylated for unsaturated

polyester oligomer polyester and vinyl ester

P-10-0338

04/06/10

07/04/10

CBI

(G) Laundry detergent (G) Acrylate component

copolymer

P-10-0339

04/06/10

07/04/10

CBI

(G) Laundry detergent (G) Acrylate component

copolymer

P-10-0340

04/05/10

07/03/10

Henkel adhesives

(S) Hot melt adhesive (S) Fatty acids, C18- unsaturated, dimers, polymers with ethylenediamine, piperazine, polypropylene glycol diamine, sebacic acid and tall-oil fatty acids

P-10-0341

04/05/10

07/03/10

CBI

(S) Crosslinker for

(G) Polyether polymers

polycarbodiimide

P-10-0342

04/06/10

07/04/10

Bimax Inc.

(S) Intermediate for (G) Poly 2-ethylhexyl production of

methacrylate dispersant polymer for paint colorants

P-10-0343

04/09/10

07/07/10

Marubeni Specialty

(G) Polymeric

(G) Substituted

Chemicals Inc.

component

cyclomethacrylate

P-10-0344

04/05/10

07/03/10

CBI

(G) Plasticizing

(G) Phenoxy alkyl component of a two

ether part coating

P-10-0345

04/16/10

07/14/10

CBI

(G) Printing ink

(G) Hexanoic acid, 6- additive

2-[5-[2,7- dihydro-3-methyl-2,7- dioxo-1-(3- sulfobenzoyl)- heteropolycycle-6- ylamino]-2,4- disulfophenyl]amino]- 2-oxoethyl]amino]-, ammonium sodium salt

(1:?:?)

P-10-0346

04/16/10

07/14/10

CBI

(G) Printing ink

(G) Copper, phthalic additive

anhydride-2,3- pyridinedicarboxylic acid-urea reaction products complexes, aminosulfonylsulfo[ 2-[4-[(2- sulfoethyl)amino]-6-

(4- sulfophenyl)amino

- monoheterocycle-2- yl]amino]ethyl]amino

]sulfonyl derivates, sodium salts

P-10-0347

04/19/10

07/17/10

CBI

(S) Electrical

(G) Modified insulating varnish

polyester for motors, generators, transformers

P-10-0348

04/16/10

07/14/10

Dow Chemical Company (S) Chemical

(G) Cyclic nitrile intermediate

aldehyde

Page 32759

P-10-0349

04/16/10

07/14/10

Dow Chemical Company (S) Chemical

(G) Cyclic nitrile intermediate

aldehyde

P-10-0350

04/16/10

07/14/10

Dow Chemical Company (S) Chemical

(G) Cyclic nitrile intermediate

aldehyde

P-10-0351

04/16/10

07/14/10

Zeon Chemicals L.P.

(S) Automotive seals (G) Modified and gaskets

acrylonitrile, butadiene polymer, hydrogenated

In Table II of this unit, EPA provides the following information

(to the extent that such information is not claimed as CBI) on the

Notices of Commencement to manufacture received:

II. 57 Notices of Commencement From: 03/01/10 to 04/23/10

Commencement Notice

Case No.

Received Date

End Date

Chemical

P-03-0481

03/08/10

01/28/10

(S) 5,2,6-

(iminomethenimino)-1H- imidazo[4,5-b]pyrazine, octahydro-1,3,4,7,8,10- hexanitro-

P-03-0568

03/08/10

01/28/10

(S) 5,2,6-

(iminomethenimino)-1H- imidazo[4,5-b]pyrazine, 1,3,8,10- tetraacetyloctahydro-

P-03-0789

03/22/10

03/09/10

(G) Derivatized butyl ester photoinitiator

P-06-0393

03/18/10

02/10/10

(G) Aliphatic urethane acrylate oligomer

P-06-0494

03/01/10

02/23/10

(G) Fluoroalkyl methacrylate copolymer

P-06-0598

03/08/10

03/01/10

(G) Polyester polyol urethane modified epoxy resin

P-06-0825

04/20/10

03/24/10

(G) Oxepanone, polymer with dialkyl-alkanediol, alkyl-(hydroxyaalkyl)- alkanediol, carbocycle, isocyanato-

(isocyanatoalkyll)- trialkyl-, alkanoic acid, hydroxy-(hydroxyalkyl)- alkyl-, alkylamine, N,N- dialkyl-, aminoalkyl- trialkylcarbocyclicamine, and alkyldiamine

P-06-0832

04/16/10

03/31/10

(S) Fatty acids, palm-oil, me esters

P-06-0833

04/16/10

03/19/10

(S) Fatty acids, peanut- oil, me esters

P-06-0834

04/16/10

03/22/10

(S) Fatty acids, linseed- oil, me esters

P-07-0328

03/05/10

02/12/10

(G) NCS 2: Substituted phenol

P-07-0425

04/09/10

03/16/10

(G) MDI polyether prepolymer

P-07-0690

04/12/10

04/02/10

(G) Polyester amine adduct

P-08-0125

03/30/10

03/05/10

(G) Methacrylate ester of a polyester from an aromatic dicarboxylate and alkyl polyols

P-08-0138

04/14/10

03/30/10

(S) Carbonotrithioic acid, bis(phenylmethyl)ester

P-08-0165

04/16/10

05/21/08

(G) Extract of tea

P-08-0561

04/16/10

11/25/08

(G) Cycloalkyl piperonyl ether

P-08-0647

03/08/10

02/23/10

(S) Extractives and their physically modified derivatives. Jasminum sambac. Oils, jasmine, jasminum sambac

P-08-0672

03/26/10

03/02/10

(G) Polyester polyurethane aqueous dispersion

P-09-0058

03/23/10

03/04/10

(G)

Alkenylsuccinicanhydride derivative

P-09-0179

04/07/10

04/02/10

(G) Fatty acids, dimers, polymers with dihydroxyfunctional monocarboxylic acid, alkane diol, alkyl isocyanate, alkanediol, aromatic anhydride, glycol ether and alkanetriol, compounds with amino alcohol

P-09-0269

03/11/10

03/08/10

(G) Crosslinked polystyrene resin with chelating bispicolylamine groups

P-09-0332

04/21/10

04/08/10

(G) Phosphonic acid ester

P-09-0371

03/03/10

01/31/10

(G) Organic acid metal halide complex

P-09-0372

03/08/10

02/23/10

(S) Oils, spartium junceum

P-09-0381

03/17/10

02/19/10

(G) Polycarbonate diol

P-09-0418

03/22/10

03/01/10

(G) Surface modified aluminum hydroxide

P-09-0463

03/18/10

02/14/10

(G) Salt of polymer of methylenebis[isocyanatoca rbomonocycle],alkanepolyo ls and amine derivatives

P-09-0500

03/02/10

01/23/10

(G) 1,4-benzenedisulfonic acid, 2,2'-[1,2- ethenediylbis[(3-sulfo- 4,1-phenylene)imino[6-

bis(alkanol)amino

-1,3,5- triazine-4,2- diyl]imino]bis-, hexasodium salt

P-09-0525

04/06/10

03/18/10

(G) Hydroxyamino aryl amine

P-09-0526

04/06/10

03/18/10

(G) Hydroxyamino aryl triamine

P-09-0562

03/01/10

02/16/10

(G) Polymer of acrylamido alkyl propane sulfonic acid sodium ammonium salt and two acrylic monomers

P-09-0597

03/08/10

02/23/10

(S) Oils, cypress, cypressus funebris

P-09-0634

04/05/10

03/16/10

(S) Phenol, 4-(1,1- dimethylethyl)-2-nitro-

P-09-0647

03/05/10

02/05/10

(G) Fatty acids, C18- unsaturted, dimers, polymers with glycidyl alkanoate, 4-oxopentanoic acid and trimethylolpropane

P-09-0649

04/16/10

04/08/10

(G) 2,5-furandione, polymer with alkene, alkyl ester, substituted imidazoline amide

P-09-0650

03/08/10

02/18/10

(G) Dimer fatty acid based polyester polyurethane

Page 32760

P-10-0035

04/16/10

03/17/10

(G) Sodium carboxylate

P-10-0041

03/12/10

02/11/10

(G) Polyether polyacid comb polymer

P-10-0051

03/17/10

03/10/10

(S) Starch, 2-carboxyethyl 2-methyl-3-oxo-3-[3-

(trimethylammonio)propyl] amino]propyl ether, chloride

P-10-0053

04/02/10

03/26/10

(G) Halogenated aromatic amine

P-10-0074

04/19/10

03/23/10

(G) Butanoic acid, 3-oxo-, 2-[(2-methyl-1-oxo-2- propen -1-yl)oxy]ethyl ester, polymer with butyl 2-methyl-2-propenoate, ethenylbenzene, 2- ethylhexyl 2-propenoate, methyl 2-methyl-2- propenoate, phosphoric acid, di-ester with hydroxy ethyl methacrylate and 2-

(phosphonooxy) ethyl 2- methyl-2-propenoate

P-10-0075

04/06/10

03/11/10

(G) Brominated aromatic polyether polyester

P-10-0077

03/11/10

03/04/10

(G) Linear hydroxy funtional polyester

P-10-0078

03/08/10

02/27/10

(G) Capped polyurethane adduct

P-10-0082

03/18/10

02/27/10

(S) 1,2,3-propanetriol, homopolymer, hexadecanoate octadecanoate

P-10-0085

03/16/10

03/05/10

(G) Bismuth salt of lactic acid

P-10-0100

03/25/10

03/21/10

(G) Polyester amine compound

P-10-0102

04/01/10

03/24/10

(S) Oils, jasmine, jasminum sambac

P-10-0103

04/19/10

03/26/10

(S) Fatty acids, C18- unsaturated, di-me esters, hydrogenated, polymers with diethylene glycol, 1,6-diisocyanato- 2,2,4-trimethylhexane, 1,6-diisocyanato-2,4,4- trimethylhexane, 2-heptyl- 3,4-bis(9- isocyanatononyl)-1- pentylcyclohexane, 1,1'- methylenebis[4- isocyanatobenzene], 2- oxepanone and tricyclodecanedimethanol, 2-hydroxyethyl acrylate- blocked

P-10-0140

04/16/10

03/31/10

(G) Urethane modified epoxy resin

P-10-0142

04/12/10

04/01/10

(G) Furan, 2-(1,1- dimethylethyl)-2, 5- dihydro-alkyl substituted

P-10-0143

04/08/10

04/02/10

(G) Hydroxyl-terminated aliphatic polycarbonate

P-10-0147

04/19/10

04/03/10

(G) Alkoxylated alkylamine

P-10-0149

04/19/10

04/07/10

(G) Alkoxylated alkylamine salt

P-10-0165

04/19/10

04/09/10

(G) Polyester resin

P-99-0332

03/18/10

03/01/10

(G) Urethane modified aromatic isocyanate

List of Subjects

Environmental protection, Chemicals, Premanufacturer notices.

Dated: May 14, 2010.

Darryl S. Ballard,

Acting Director, Information Management Division, Office of Pollution

Prevention and Toxics.

FR Doc. 2010-13627 Filed 6-8-10; 8:45 am

BILLING CODE 6560-50-S

---