Medical Devices:

Federal Register Volume 76, Number 161 (Friday, August 19, 2011)

Rules and Regulations

Pages 51876-51878

From the Federal Register Online via the Government Printing Office [www.gpo.gov]

FR Doc No: 2011-21195

DEPARTMENT OF HEALTH AND HUMAN SERVICES

Food and Drug Administration 21 CFR Part 886

Docket No. FDA-2011-M-0570

Medical Devices; Ophthalmic Devices; Classification of the Eyelid

Thermal Pulsation System

AGENCY: Food and Drug Administration, HHS.

ACTION: Final rule.

SUMMARY: The Food and Drug Administration (FDA) is classifying the eyelid thermal pulsation system into class II (special controls). The

Agency is classifying the device into class II (special controls) in order to provide a reasonable assurance of safety and effectiveness of the device.

DATES: This rule is effective September 19, 2011. The classification was effective on June 28, 2011.

FOR FURTHER INFORMATION CONTACT: Marc Robboy, Center for Devices and

Radiological Health, Food and Drug Administration, 10903 New Hampshire

Ave., Bldg. 66, Rm. 2256, Silver Spring, MD 20993-0002, 301-796-6860.

SUPPLEMENTARY INFORMATION:

  1. Background

    In accordance with section 513(f)(1) of the Federal Food, Drug, and

    Cosmetic Act (FD&C Act) (21 U.S.C. 360c(f)(1)), devices that were not in commercial distribution before May 28, 1976 (the date of enactment of the Medical Device Amendments of 1976), generally referred to as postamendments devices, are classified automatically by statute into class III without any FDA rulemaking process. These devices remain in class III and require premarket approval, unless and until the device is classified or reclassified into class I or II, or FDA issues an order finding the device to be substantially equivalent, in accordance with section 513(i) of the FD&C Act (21 U.S.C. 360c(i)), to a predicate device that does not require premarket approval. The Agency determines whether new devices are substantially equivalent to predicate devices by means of premarket notification procedures in section 510(k) of the

    FD&C Act (21 U.S.C. 360(k)) and part 807 of the regulations (21 CFR part 807).

    Section 513(f)(2) of the FD&C Act provides that any person who submits a premarket notification under section 510(k) of the FD&C Act for a device that has not previously been classified may, within 30 days after receiving an order classifying the device into class III under section 513(f)(1) of the FD&C Act, request FDA to classify the device under the criteria set forth in section 513(a)(1) of the FD&C

    Act. FDA will, within 60 days of receiving this request, classify the device by written order. This classification will be the initial classification of the device. Within 30 days after the issuance of an order classifying the device, FDA must publish a notice in the Federal

    Register announcing this classification.

    In accordance with section 513(f)(1) of the FD&C Act, FDA issued an order on July 12, 2010, classifying the LipiFlow[supreg] Thermal

    Pulsation System into class III, because it was not substantially equivalent to a device that was introduced or delivered for introduction into interstate commerce for commercial distribution before May 28, 1976, or a device which was subsequently reclassified into class I or class II. On August 6, 2010, TearScience, Inc., submitted a petition requesting classification of the LipiFlow[supreg]

    Thermal Pulsation System under section 513(f)(2) of the FD&C Act. The manufacturer recommended that the device be classified into class II.

    (Ref. 1)

    In accordance with section 513(f)(2) of the FD&C Act, FDA reviewed the petition in order to classify the device under the criteria for classification set forth in section 513(a)(1) of the FD&C Act. FDA classifies devices into class II if general controls by themselves are insufficient to provide reasonable assurance of safety and effectiveness, but there is sufficient information to establish special controls to provide reasonable assurance of the safety and effectiveness of the device for its intended use. After review of the information submitted in the petition, FDA determined that the device can be classified into class II with the establishment of special controls. FDA believes these special controls will provide reasonable assurance of the safety and effectiveness of the device.

    The device is assigned the generic name eyelid thermal pulsation system, and it is identified as an electrically-powered device intended for use in the application of localized heat and pressure therapy to the eyelids. The device is used in adult patients with chronic cystic conditions of the eyelids,

    Page 51877

    including meibomian gland dysfunction (MGD), also known as evaporative dry eye or lipid deficiency dry eye. The system consists of a component that is inserted around the eyelids and a component to control the application of heat and pressure to the eyelids.

    FDA has identified the following risks to health associated with this type of device and the measures required to mitigate these risks:

    Identified risk

    Mitigation measures

    Infection................................. Sterility and Shelf Life

    Testing.

    Adverse tissue reaction................... Biocompatibility.

    Electrical shock.......................... Electrical Safety Testing.

    Electromagnetic interference.............. Electromagnetic

    Compatibility (EMC)

    Testing; Labeling.

    Thermal damage............................ Temperature Performance

    Testing.

    Mechanical damage......................... Pressure Performance

    Testing.

    Malfunction............................... Non-clinical and Clinical

    Performance Testing.

    User error................................ Labeling.

    FDA believes that the following special controls can address these risks to health and provide reasonable assurance of safety and effectiveness: (1) Appropriate analysis/testing should validate electromagnetic compatibility (EMC) and safety of exposure to non- ionizing radiation; (2) Design, description, and performance data should validate safeguards related to the temperature and pressure aspects of the device, including during fault conditions; (3)

    Performance data should demonstrate the sterility of patient-contacting components and the shelf-life of these components; (4) The device should be demonstrated to be biocompatible; and (5) Performance data should demonstrate that any technological changes do not adversely affect safety and effectiveness. Therefore, on June 28, 2011, FDA issued an order to the petitioner classifying the device into class II.

    FDA is codifying the classification of the device by adding Sec. 886.5200.

    Following the effective date of this final classification rule, any firm submitting a 510(k) premarket notification for an eyelid thermal pulsation system will need to comply with the special controls named in the regulation.

    Section 510(m) of the FD&C Act provides that FDA may exempt a class

    II device from the premarket notification requirements under section 510(k) of the FD&C Act, if FDA determines that premarket notification is not necessary to provide reasonable assurance of the safety and effectiveness of the device. For this type of device, FDA has determined that premarket notification is necessary to provide reasonable assurance of the safety and effectiveness of the device.

    Therefore, this device type is not exempt from premarket notification requirements. Persons who intend to market this type of device must submit to FDA a premarket notification, prior to marketing the device, which contains information about the eyelid thermal pulsation system they intend to market.

  2. Environmental Impact

    The Agency has determined under 21 CFR 25.34(b) that this action is of a type that does not individually or cumulatively have a significant effect on the human environment. Therefore, neither an environmental assessment nor an environmental impact statement is required.

  3. Analysis of Impacts

    FDA has examined the impacts of the final rule under Executive

    Order 12866, Executive Order 13563, the Regulatory Flexibility Act (5

    U.S.C. 601-612), and the Unfunded Mandates Reform Act of 1995 (Pub. L. 104-4). Executive Orders 12866 and 13563 direct agencies to assess all costs and benefits of available regulatory alternatives and, when regulation is necessary, to select regulatory approaches that maximize net benefits (including potential economic, environmental, public health and safety, and other advantages; distributive impacts; and equity). The agency believes that this final rule is not a significant regulatory action under Executive Order 12866.

    The Regulatory Flexibility Act requires agencies to analyze regulatory options that would minimize any significant impact of a rule on small entities. Because reclassification of this device from class

    III to class II will relieve manufacturers of the device of the cost of complying with the premarket approval requirements of section 515 of the FD&C act (21 U.S.C. 360e), and may permit small potential competitors to enter the marketplace by lowering their costs, the

    Agency certifies that the final rule will not have a significant economic impact on a substantial number of small entities.

    Section 202(a) of the Unfunded Mandates Reform Act of 1995 requires that agencies prepare a written statement, which includes an assessment of anticipated costs and benefits, before proposing ``any rule that includes any Federal mandate that may result in the expenditure by

    State, local, and tribal governments, in the aggregate, or by the private sector, of $100,000,000 or more (adjusted annually for inflation) in any one year.'' The current threshold after adjustment for inflation is $136 million, using the most current (2010) Implicit

    Price Deflator for the Gross Domestic Product. FDA does not expect this final rule to result in any 1-year expenditure that would meet or exceed this amount.

  4. Federalism

    FDA has analyzed this final rule in accordance with the principles set forth in Executive Order 13132. Section 4(a) of the Executive order requires agencies to ``construe * * * a Federal statute to preempt

    State law only where the statute contains an express preemption provision or there is some other clear evidence that the Congress intended preemption of State law, or where the exercise of State authority conflicts with the exercise of Federal authority under the

    Federal statute.'' Federal law includes an express preemption provision that preempts certain state requirements ``different from or in addition to'' certain Federal requirements applicable to devices. (See section 521 of the FD&C Act (21 U.S.C. 360k) Medtronic Inc., v. Lohr, 518 U.S. 470 (1996); Riegel v. Medtronic, Inc., 128 S. Ct. 999 (2008)).

    The special controls established by this final rule create

    ``requirements'' for specific medical devices under 21 U.S.C. 360k, even though product sponsors have some flexibility in how they meet those requirements. See Papike v. Tambrands, Inc., 107 F. 3d 737, 740- 42 (9th Cir. 1997).

  5. Paperwork Reduction Act of 1995

    This final rule establishes special controls that refer to currently approved collections of information found in other FDA regulations. These collections of information are subject to review by the Office of Management and Budget (OMB) under the Paperwork Reduction

    Act of 1995 (44 U.S.C. 32501-3520). The collections of information in 21 CFR part 807, supbart E, have been approved under OMB control number 0910-0120; the collections of information in 21 CFR part 801 have been approved under OMB control number 0910-0485.

  6. References

    The following references have been placed on display in the

    Division of Dockets Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852, and may be seen by interested persons

    Page 51878

    between 9 a.m. and 4 p.m., Monday through Friday. 1. Petition from TearScience, Inc., August 6, 2010.

    List of Subjects in 21 CFR Part 886

    Medical devices.

    Therefore, under the Federal Food, Drug, and Cosmetic Act and under authority delegated to the Commissioner of Food and Drugs, 21 CFR part 886 is amended as follows:

    PART 886--OPHTHALMIC DEVICES 0 1. The authority citation for 21 CFR part 886 continues to read as follows:

    Authority: 21 U.S.C. 351, 360, 360c, 360e, 360j, 371. 0 2. Section 886.5200 is added to subpart F to read as follows:

    Sec. 886.5200 Eyelid thermal pulsation system.

    (a) Identification. An eyelid thermal pulsation system is an electrically-powered device intended for use in the application of localized heat and pressure therapy to the eyelids. The device is used in adult patients with chronic cystic conditions of the eyelids, including meibomian gland dysfunction (MGD), also known as evaporative dry eye or lipid deficiency dry eye. The system consists of a component that is inserted around the eyelids and a component to control the application of heat and pressure to the eyelids.

    (b) Classification. Class II (special controls). The special controls for this device are:

    (1) Appropriate analysis/testing should validate electromagnetic compatibility (EMC) and safety of exposure to non-ionizing radiation;

    (2) Design, description, and performance data should validate safeguards related to the temperature and pressure aspects of the device, including during fault conditions;

    (3) Performance data should demonstrate the sterility of patient- contacting components and the shelf-life of these components;

    (4) The device should be demonstrated to be biocompatible; and

    (5) Performance data should demonstrate that any technological changes do not adversely effect safety and effectiveness.

    Dated: August 12, 2011.

    Nancy K. Stade,

    Deputy Director for Policy, Center for Devices and Radiological Health.

    FR Doc. 2011-21195 Filed 8-18-11; 8:45 am

    BILLING CODE 4160-01-P

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT