Airworthiness directives: Boeing,
[Federal Register: December 16, 2005 (Volume 70, Number 241)]
[Rules and Regulations]
[Page 74639-74640]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr16de05-1]
Rules and Regulations Federal Register
This section of the FEDERAL REGISTER contains regulatory documents having general applicability and legal effect, most of which are keyed to and codified in the Code of Federal Regulations, which is published under 50 titles pursuant to 44 U.S.C. 1510.
The Code of Federal Regulations is sold by the Superintendent of Documents. Prices of new books are listed in the first FEDERAL REGISTER issue of each week.
[[Page 74639]]
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
[Docket No. FAA-2005-22437; Directorate Identifier 2005-NM-082-AD; Amendment 39-14419; AD 2005-25-26]
RIN 2120-AA64
Airworthiness Directives; Boeing Model 747-400, 747-400D, and 747-400F Series Airplanes
AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT).
ACTION: Final rule.
SUMMARY: The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 747-400, 747-400D, and 747-400F series airplanes. This AD requires repetitive detailed inspections for damage (degraded finish; missing, lifted, peeling, or blistering paint; or signs of corrosion) of the interior skin in the forward and aft cargo compartments, and corrective actions if necessary. This AD results from reports of skin corrosion on four Boeing Model 747 series airplanes that were delivered between 1995 and 1999. We are issuing this AD to detect and correct corrosion, which can penetrate the thickness of the skin and cause cracking, and result in rapid decompression of the airplane.
DATES: This AD becomes effective January 20, 2006.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in the AD as of January 20, 2006.
ADDRESSES: You may examine the AD docket on the Internet at http://dms.dot.gov or in person at the Docket Management Facility, U.S.
Department of Transportation, 400 Seventh Street SW., Nassif Building, room PL-401, Washington, DC.
Contact Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124-2207, for service information identified in this AD.
FOR FURTHER INFORMATION CONTACT: Nicholas Kusz, Aerospace Engineer, Airframe Branch, ANM-120S, FAA, Seattle Aircraft Certification Office, 1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425) 917-6432; fax (425) 917-6590.
SUPPLEMENTARY INFORMATION:
Examining the Docket
You may examine the airworthiness directive (AD) docket on the Internet at http://dms.dot.gov or in person at the Docket Management
Facility office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The Docket Management Facility office (telephone (800) 647-5227) is located on the plaza level of the Nassif Building at the street address stated in the ADDRESSES section.
Discussion
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to include an AD that would apply to certain Boeing Model 747-400, 747-400D, and 747-400F series airplanes. That NPRM was published in the Federal Register on September 15, 2005 (70 FR 54484). That NPRM proposed to require repetitive detailed inspections for damage (degraded finish; missing, lifted, peeling, or blistering paint; or signs of corrosion) of the interior skin in the forward and aft cargo compartments, and corrective actions if necessary.
Comments
We provided the public the opportunity to participate in the development of this AD. We received no comments on the NPRM or on the determination of the cost to the public.
Clarification of Alternative Method of Compliance (AMOC) Paragraph
We have revised this action to clarify the appropriate procedure for notifying the principal inspector before using any approved AMOC on any airplane to which the AMOC applies.
Conclusion
We have carefully reviewed the available data and determined that air safety and the public interest require adopting the AD with the change described previously. We have determined that this change will neither increase the economic burden on any operator nor increase the scope of the AD.
Costs of Compliance
There are about 260 airplanes of the affected design in the worldwide fleet. The following table provides the estimated costs for U.S. operators to comply with this AD.
Estimated Costs
Number of Average
U.S.- Action
Work hours labor rate Parts
Cost per airplane
registered
Fleet cost per hour
airplanes
Detailed inspection, per inspection cycle
10
$65
N/A $650, per inspection cycle..
36 $23,400, per inspection cycle.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in subtitle VII, part A, subpart III, section 44701, ``General requirements.'' Under that section, Congress charges the FAA with
[[Page 74640]]
promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
We have determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive Order 12866;
(2) Is not a ``significant rule'' under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and
(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
We prepared a regulatory evaluation of the estimated costs to comply with this AD and placed it in the AD docket. See the ADDRESSES section for a location to examine the regulatory evaluation.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.
Adoption of the Amendment
0 Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0 1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
0 2. The Federal Aviation Administration (FAA) amends Sec. 39.13 by adding the following new airworthiness directive (AD):
2005-25-26 Boeing: Amendment 39-14419. Docket No. FAA-2005-22437; Directorate Identifier 2005-NM-082-AD.
Effective Date
(a) This AD becomes effective January 20, 2006.
Affected ADs
(b) None.
Applicability
(c) This AD applies to Boeing Model 747-400, 747-400D, and 747- 400F series airplanes, certificated in any category; as identified in Boeing Alert Service Bulletin 747-53A2505, dated March 17, 2005.
Unsafe Condition
(d) This AD was prompted by reports of skin corrosion on four Boeing Model 747 series airplanes that were delivered between 1995 and 1999. We are issuing this AD to detect and correct corrosion, which can penetrate the thickness of the skin and cause cracking, and result in rapid decompression of the airplane.
Compliance
(e) You are responsible for having the actions required by this AD performed within the compliance times specified, unless the actions have already been done.
Repetitive Inspections and Corrective Actions
(f) Within 12 months after the effective date of this AD, do a detailed inspection for damage (degraded finish; missing, lifted, peeling, or blistering paint; or signs of corrosion) of the interior skin in the forward and aft cargo compartments. Do any applicable corrective actions before further flight. Except as required by paragraphs (g) and (h) of this AD, do all actions in accordance with the Accomplishment Instructions of Boeing Alert Service Bulletin 747-53A2505, dated March 17, 2005. Repeat the inspection thereafter at intervals not to exceed 48 months until accomplishing task number C53-125-01 of Boeing Document Number D6-36022, ``Aging Airplane Corrosion Prevention and Control Program--Model 747,'' Revision A, dated July 28, 1989, or until accomplishing tasks S53-520 and S53- 550 of Boeing Document D621U400-MRB, ``B747-400 Maintenance Review Board Report,'' Revision E, dated May 2003.
Note 1: For the purposes of this AD, a detailed inspection is: ``An intensive examination of a specific item, installation, or assembly to detect damage, failure, or irregularity. Available lighting is normally supplemented with a direct source of good lighting at an intensity deemed appropriate. Inspection aids such as mirror, magnifying lenses, etc., may be necessary. Surface cleaning and elaborate procedures may be required.''
Damage That Exceeds Structural Repair Manual Limits
(g) If any corrosion damage that exceeds the limits specified in the structural repair manual is found during any action required by this AD, and Boeing Alert Service Bulletin 747-53A2505, dated March 17, 2005, specifies to contact Boeing for repair instructions: Before further flight, repair the damage using a method approved in accordance with the procedures specified in paragraph (i) of this AD.
No Reporting Requirement
(h) Although Boeing Alert Service Bulletin 747-53A2505, dated March 17, 2005, specifies to submit to the manufacturer a report of the inspection program and details of any corrosion damage and peeling paint primer, this AD does not include those actions.
Alternative Methods of Compliance (AMOCs)
(i)(1) The Manager, Seattle Aircraft Certification Office (ACO), FAA, has the authority to approve AMOCs for this AD, if requested in accordance with the procedures found in 14 CFR 39.19.
(2) Before using any AMOC approved in accordance with Sec. 39.19 on any airplane to which the AMOC applies, notify the appropriate principal inspector in the FAA Flight Standards Certificate Holding District Office.
(3) An AMOC that provides an acceptable level of safety may be used for any repair required by this AD, if it is approved by an Authorized Representative for the Boeing Commercial Airplanes Delegation Option Authorization Organization who has been authorized by the Manager, Seattle ACO, to make those findings. For a repair method to be approved, the repair must meet the certification basis of the airplane, and the approval must specifically refer to this AD.
Material Incorporated by Reference
(j) You must use Boeing Alert Service Bulletin 747-53A2505, dated March 17, 2005, to perform the actions that are required by this AD, unless the AD specifies otherwise. The Director of the Federal Register approved the incorporation by reference of this documents in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Contact Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124-2207, for a copy of this service information. You may review copies at the Docket Management Facility, U.S. Department of Transportation, 400 Seventh Street SW., room PL-401, Nassif Building, Washington, DC; on the Internet at http://dms.dot.gov; or
at the National Archives and Records Administration (NARA). For information on the availability of this material at the NARA, call (202) 741-6030, or go to http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html .
Issued in Renton, Washington, on December 8, 2005. Michael Zielinski, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service.
[FR Doc. 05-24053 Filed 12-15-05; 8:45 am]
BILLING CODE 4910-13-P
