Airworthiness Directives; Bombardier, Inc. Airplanes
Federal Register, Volume 80 Issue 83 (Thursday, April 30, 2015)
Federal Register Volume 80, Number 83 (Thursday, April 30, 2015)
Rules and Regulations
Pages 24198-24200
From the Federal Register Online via the Government Publishing Office www.gpo.gov
FR Doc No: 2015-09813
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
Docket No. FAA-2015-0074; Directorate Identifier 2014-NM-138-AD; Amendment 39-18147; AD 2015-09-02
RIN 2120-AA64
Airworthiness Directives; Bombardier, Inc. Airplanes
AGENCY: Federal Aviation Administration (FAA), Department of Transportation (DOT).
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by a determination that without an effective maintenance task to maintain the airplane's inherent level of safety, there is a potential that a dormant failure of the alternate release system of the landing gear could occur. This AD requires revising the maintenance or inspection program, as applicable, to incorporate a maintenance task for an operational check of the electro-
mechanical actuator and release mechanism of the alternate extension system for the nose landing gear and main landing gear. We are issuing this AD to prevent failure of the alternate release system of the landing gear, which could prevent the landing gear from extending during a failure of the normal landing gear extension system.
DATES: This AD becomes effective June 4, 2015.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of June 4, 2015.
ADDRESSES: You may examine the AD docket on the Internet at http://www.regulations.gov/#!docketDetail;D=FAA-2015-0074 or in person at the Docket Management Facility, U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC.
For service information identified in this AD, contact Bombardier, Inc., 400 Cocircte-Vertu Road West, Dorval, Queacutebec H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-7401; email thd.crj@aero.bombardier.com; Internet http://www.bombardier.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221. It is also available on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2015-0074.
FOR FURTHER INFORMATION CONTACT: Cesar Gomez, Aerospace Engineer, Airframe and Mechanical Systems Branch, ANE-171, FAA, New York Aircraft Certification Office, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7318; fax 516-794-5531.
SUPPLEMENTARY INFORMATION:
Discussion
We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Bombardier, Inc. Model CL-600-2E25 (Regional Jet Series 1000) airplanes. The NPRM published in the Federal Register on January 23, 2015 (80 FR 3498).
Transport Canada Civil Aviation (TCCA), which is the aviation authority for Canada, has issued Canadian Airworthiness Directive CF-
2014-16, dated June 11, 2014 (referred to after this as the Mandatory Continuing Airworthiness Information, or ``the MCAI''), to correct an unsafe condition for certain Bombardier, Inc. Model CL-600-2E25 (Regional Jet Series 1000) airplanes. The MCAI states:
During a design review, an error was identified which led to the development of a new certification maintenance requirement (CMR) task. Without an effective maintenance task to maintain the aeroplane's inherent level of safety, there is a potential that a dormant failure of the alternate release system of the landing gear could occur. Failure of the landing gear alternate release system could prevent the landing gear from extending in the case of a failure of the normal landing gear extension system.
This Canadian AD mandates the incorporation of a new maintenance task to ensure operation of the landing gear alternate extension system.
You may examine the MCAI in the AD docket on the Internet at http://www.regulations.gov/#!documentDetail;D=FAA-2015-0074-0003.
Comments
We gave the public the opportunity to participate in developing this AD. We received no comments on the NPRM (80 FR 3498, January 23, 2015) or on the determination of the cost to the public.
Conclusion
We reviewed the relevant data and determined that air safety and the public interest require adopting this AD as proposed except for minor editorial changes. We have determined that these minor changes:
Are consistent with the intent that was proposed in the NPRM (80 FR 3498, January 23, 2015) for correcting the unsafe condition; and
Do not add any additional burden upon the public than was already proposed in the NPRM (80 FR 3498, January 23, 2015).
Related Service Information Under 1 CFR Part 51
Bombardier, Inc. has issued Temporary Revision (TR) ALI-0472, dated February 27, 2014, to Section 1-32 of Part 2, Bombardier Airworthiness Limitations, of the CRJ Series Regional Jet Maintenance Requirements Manual, CSP B-053. This service information describes a maintenance task for an operational check of the electro-mechanical actuator and release mechanism of the alternate extension system for the nose landing gear and main landing gear. The actions described in this service information are intended to correct the unsafe condition identified in the MCAI. This service information is reasonably available at http://www.regulations.gov by searching for and locating Docket No. FAA-2015-
Page 24199
0074. Or see ADDRESSES for other ways to access this service information.
Costs of Compliance
We estimate that this AD affects 35 airplanes of U.S. registry.
We also estimate that it will take about 1 work-hour per product to comply with the basic requirements of this AD. The average labor rate is $85 per work-hour. Based on these figures, we estimate the cost of this AD on U.S. operators to be $2,975, or $85 per product.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. ``Subtitle VII: Aviation Programs,'' describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in ``Subtitle VII, Part A, Subpart III, Section 44701: General requirements.'' Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
We determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
1. Is not a ``significant regulatory action'' under Executive Order 12866;
2. Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979);
3. Will not affect intrastate aviation in Alaska; and
4. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
Examining the AD Docket
You may examine the AD docket on the Internet at http://www.regulations.gov/#!docketDetail;D=FAA-2015-0074; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Operations office (telephone 800-647-
5527) is in the ADDRESSES section.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES
0
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 Amended
0
2. The FAA amends Sec. 39.13 by adding the following new airworthiness directive (AD):
2015-09-02 Bombardier, Inc.: Amendment 39-18147. Docket No. FAA-
2015-0074; Directorate Identifier 2014-NM-138-AD.
(a) Effective Date
This AD becomes effective June 4, 2015.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Bombardier, Inc. Model CL-600-2E25 (Regional Jet Series 1000) airplanes, certificated in any category, serial numbers 19002 and subsequent.
(d) Subject
Air Transport Association (ATA) of America Code 32, Landing Gear.
(e) Reason
This AD was prompted by a determination that without an effective maintenance task to maintain the airplane's inherent level of safety, there is a potential that a dormant failure of the alternate release system of the landing gear can occur. We are issuing this AD to prevent failure of the alternate release system of the landing gear, which could prevent the landing gear from extending during a failure of the normal landing gear extension system.
(f) Compliance
Comply with this AD within the compliance times specified, unless already done.
(g) Maintenance or Inspection Program Revision
Within 30 days after the effective date of this AD, revise the maintenance or inspection program, as applicable, to incorporate Task 32-01-00-101, ``Operational Check of the MLG Main Landing Gear and NLG Nose Landing Gear AES Alternate Extension System EMA Electro-mechanical Actuator and Release Mechanism (CRJ1000),'' for the operational check of the MLG and NLG AES EMA and release mechanism, as specified in Bombardier Temporary Revision (TR) ALI-
0472, dated February 27, 2014, to Section 1-32 of Part 2, Airworthiness Limitations, of the Bombardier CRJ Series Regional Jet, Maintenance Requirements Manual, CSP B-053. The initial compliance time for the operational check is at the applicable time specified in paragraphs (g)(1) and (g)(2) of this AD.
(1) For airplanes that have accumulated 540 total flight hours or more as of the effective date of this AD: Within 660 flight hours after the effective date of this AD.
(2) For airplanes that have accumulated less than 540 total flight hours as of the effective date of this AD: Before the accumulation of 1,200 total flight hours.
(h) No Alternative Actions or Intervals
After accomplishing the revision required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (i)(1) of this AD.
(i) Other FAA AD Provisions
The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager, New York Aircraft Certification Office (ACO), ANE-170, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the ACO, send it to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-7300; fax 516-794-5531. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office. The AMOC approval letter must specifically reference this AD.
(2) Contacting the Manufacturer: For any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, New York ACO, ANE-170, FAA; or Transport Canada Civil Aviation (TCCA); or Bombardier, Inc.'s TCCA Design Organization Approval (DAO). If approved by the DAO, the approval must include the DAO-authorized signature.
Page 24200
(j) Related Information
Refer to Mandatory Continuing Airworthiness Information (MCAI) Canadian Airworthiness Directive CF-2014-16, dated June 11, 2014, for related information. This MCAI may be found in the AD docket on the Internet at http://www.regulations.gov/#!documentDetail;D=FAA-
2015-0074-0003.
(k) Material Incorporated by Reference
(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
(i) Bombardier Temporary Revision ALI-0472, dated February 27, 2014, to Section 1-32 of Part 2, Airworthiness Limitations, of the Bombardier CRJ Series Regional Jet Maintenance Requirements Manual, CSP B-053.
(ii) Reserved.
(3) For service information identified in this AD, contact Bombardier, Inc., 400 Cocircte-Vertu Road West, Dorval, Queacutebec H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-
7401; email thd.crj@aero.bombardier.com; Internet http://www.bombardier.com.
(4) You may view this service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221.
(5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.
Issued in Renton, Washington, on April 14, 2015.
Michael Kaszycki,
Acting Manager, Transport Airplane Directorate, Aircraft Certification Service.
FR Doc. 2015-09813 Filed 4-29-15; 8:45 am
BILLING CODE 4910-13-P
