Airworthiness directives: British Aerospace,
[Federal Register: July 31, 2002 (Volume 67, Number 147)]
[Proposed Rules]
[Page 49627-49630]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr31jy02-25]
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 2002-CE-14-AD]
RIN 2120-AA64
Airworthiness Directives; British Aerospace Model HP.137 Jetstream Mk.1, Jetstream Series 200, Jetstream Series 3101, and Jetstream Model 3201 Airplanes
AGENCY: Federal Aviation Administration, DOT.
ACTION: Notice of proposed rulemaking (NPRM).
SUMMARY: This document proposes to adopt a new airworthiness directive (AD) that would apply to all British Aerospace Model HP.137 Jetstream Mk.1, Jetstream Series 200, Jetstream Series 3101, and Jetstream Model 3201 airplanes. This proposed AD would require you to repetitively inspect the horizontal and vertical stabilizer attachment fittings and associated hardware for corrosion and wear (damage). If damage is found, this proposed AD would also require you to repair or replace the damaged parts. This proposed AD is the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for the United Kingdom. The actions specified by this proposed AD are intended to detect and correct damage on the horizontal and vertical stabilizer attachment fittings and associated hardware, which could result in failure of the attachment fittings. Such failure could lead to fluttering and subsequent structural failure of the empennage.
DATES: The Federal Aviation Administration (FAA) must receive any comments on this proposed rule on or before August 30, 2002.
ADDRESSES: Submit comments to FAA, Central Region, Office of the Regional Counsel, Attention: Rules Docket No. 2002-CE-14-AD, 901 Locust, Room 506, Kansas City, Missouri 64106. You may view any comments at this location between 8 a.m. and 4 p.m., Monday through Friday, except Federal holidays. You may also send comments electronically to the following address: 9-ACE-7-Docket@faa.gov. Comments sent electronically must contain ``Docket No. 2002-CE-14-AD'' in the subject line. If you send comments electronically as attached electronic files, the files must be formatted in Microsoft Word 97 for Windows or ASCII text.
You may get service information that applies to this proposed AD from British Aerospace Regional Aircraft, Prestwick International Airport, Ayrshire, KA9 2RW, Scotland; telephone: (01292) 672345; facsimile: (01292) 671625. You may also view this information at the Rules Docket at the address above.
FOR FURTHER INFORMATION CONTACT: Doug Rudolph, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4059; facsimile: (816) 329-4090.
SUPPLEMENTARY INFORMATION:
Comments Invited
How Do I Comment on This Proposed AD?
The FAA invites comments on this proposed rule. You may submit whatever written data, views, or arguments you choose. You need to include the rule's docket number and submit your comments to the address specified under the caption ADDRESSES. We will consider all comments received on or before the closing date. We may amend this proposed rule in light of comments received. Factual information that supports your ideas and suggestions is extremely helpful in evaluating the effectiveness of this proposed AD action and determining whether we need to take additional rulemaking action.
[[Page 49628]]
Are There Any Specific Portions of This Proposed AD I Should Pay Attention to?
The FAA specifically invites comments on the overall regulatory, economic, environmental, and energy aspects of this proposed rule that might suggest a need to modify the rule. You may view all comments we receive before and after the closing date of the rule in the Rules Docket. We will file a report in the Rules Docket that summarizes each contact we have with the public that concerns the substantive parts of this proposed AD.
How Can I Be Sure FAA Receives My Comment?
If you want FAA to acknowledge the receipt of your mailed comments, you must include a self-addressed, stamped postcard. On the postcard, write ``Comments to Docket No. 2002-CE-14-AD.'' We will date stamp and mail the postcard back to you.
Discussion
What Events Have Caused This Proposed AD?
The Civil Aviation Authority (CAA), which is the airworthiness authority for the United Kingdom, recently notified FAA that an unsafe condition may exist on all British Aerospace Model HP.137 Jetstream Mk.1, Jetstream Series 200, Jetstream Series 3101, and Jetstream Model 3201 airplanes. The CAA reports that, during regular scheduled maintenance, an operator discovered fretting corrosion on the horizontal and vertical stabilizer attachment bolts on an in service Jetstream Series 4100 airplane. The Jetstream Series 4100 airplane has a similar structural layout in the affected area to those affected by this proposed action. The corrosion is occurring on the eye bolt shanks and the horizontal and vertical stabilizer forward and rear attachment fitting lugs on the contact faces. There have been 10 reported cases of corrosion found on Jetstream Series 3101 and Jetstream Model 3201 airplanes.
What Are the Consequences If the Condition Is Not Corrected?
This condition, if not detected and corrected, could result in failure of the horizontal and vertical stabilizer attachment fittings. Such failure could lead to fluttering and subsequent structural failure of the empennage.
Is There Service Information That Applies to This Subject?
British Aerospace has issued Jetstream Service Bulletin 55- JA010941, Original issue: January 25, 2002.
What Are the Provisions of This Service Information?
The service bulletin includes procedures for:
--Repetitively inspecting the forward and rear horizontal and vertical stabilizer attachment fittings and associated hardware for corrosion and wear (damage); and --Replacing or repairing any damaged parts found during any inspection.
What Action Did the CAA Take?
The CAA classified this service bulletin as mandatory in order to assure the continued airworthiness of these airplanes in the United Kingdom. The CAA classifying a service bulletin as mandatory is the same in the United Kingdom as the FAA issuing an AD in the United States.
Was This in Accordance With the Bilateral Airworthiness Agreement?
These airplane models are manufactured in the United Kingdom and are type certificated for operation in the United States under the provisions of section 21.29 of the Federal Aviation Regulations (14 CFR 21.29) and the applicable bilateral airworthiness agreement.
Pursuant to this bilateral airworthiness agreement, the CAA has kept FAA informed of the situation described above.
The FAA's Determination and an Explanation of the Provisions of This Proposed AD
What Has FAA Decided?
The FAA has examined the findings of the CAA; reviewed all available information, including the service information referenced above; and determined that:
--The unsafe condition referenced in this document exists or could develop on other British Aerospace Model HP.137 Jetstream Mk.1, Jetstream Series 200, Jetstream Series 3101, and Jetstream Model 3201 airplanes of the same type design that are on the U.S. registry; --The actions specified in the previously-referenced service information should be accomplished on the affected airplanes; and --AD action should be taken in order to correct this unsafe condition.
What Would This Proposed AD Require?
This proposed AD would require you to incorporate the actions in the previously-referenced service bulletin.
Cost Impact
How Many Airplanes Would This Proposed AD Impact?
We estimate that this proposed AD affects 250 airplanes in the U.S. registry.
What Would Be the Cost Impact of This Proposed AD on Owners/Operators of the Affected Airplanes?
We estimate the following costs to accomplish the proposed inspection:
Total cost Labor cost
Parts cost
per airplane Total cost on U.S. operators
40 workhours x $60 = $2,400........ No parts required to
$2,400 $2,400 x 250 = $600,000. perform the inspection.
The FAA has no method of determining the number of repetitive inspections each owner/operator would incur over the life of each of the affected airplanes so the cost impact is based on the initial inspection.
The FAA has no method of determining the number of repairs each owner/operator would incur over the life of each of the affected airplanes based on the results of the proposed inspections. We have no way of determining the number of airplanes that may need such repair. The extent of damage would vary on each airplane.
Compliance Time of This Proposed AD
What Would Be the Compliance Time of This Proposed AD?
The compliance time of this proposed AD is ``upon accumulating 8 calendar years on the airframe or within the next 6 months after the effective date of this AD, whichever occurs later.''
Why Is the Compliance Time Presented in Calendar Time Instead of Hours Time-in-Service (TIS)?
The unsafe condition specified by this proposed AD is caused by corrosion. Corrosion can occur regardless of whether the aircraft is in operation or is in storage. Therefore, to assure that the unsafe condition specified in this
[[Page 49629]]
proposed AD does not go undetected for a long period of time, the compliance is presented in calendar time instead of hours time-in- service (TIS). This will allow the owners/operators to work the proposed inspection into regularly scheduled maintenance.
Regulatory Impact
Would This Proposed AD Impact Various Entities?
The regulations proposed herein would not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. Therefore, it is determined that this proposed rule would not have federalism implications under Executive Order 13132.
Would This Proposed AD Involve a Significant Rule or Regulatory Action?
For the reasons discussed above, I certify that this proposed action (1) is not a ``significant regulatory action'' under Executive Order 12866; (2) is not a ``significant rule'' under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and (3) if promulgated, will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. A copy of the draft regulatory evaluation prepared for this action has been placed in the Rules Docket. A copy of it may be obtained by contacting the Rules Docket at the location provided under the caption ADDRESSES.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Safety.
The Proposed Amendment
Accordingly, under the authority delegated to me by the Administrator, the Federal Aviation Administration proposes to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows:
PART 39--AIRWORTHINESS DIRECTIVES
1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended]
2. FAA amends Sec. 39.13 by adding a new airworthiness directive (AD) to read as follows:
British Aerospace: Docket No. 2002-CE-14-AD.
(a) What airplanes are affected by this AD? This AD affects Model HP.137 Jetstream Mk.1, Jetstream Series 200, Jetstream Series 3101, and Jetstream Model 3201 airplanes, all serial numbers, that are certificated in any category.
(b) Who must comply with this AD? Anyone who wishes to operate any of the airplanes identified in paragraph (a) of this AD must comply with this AD.
(c) What problem does this AD address? The actions specified by this AD are intended to detect and correct corrosion and/or wear on the horizontal and vertical stabilizer attachment fittings and associated hardware, which could result in failure of the attachment fittings. Such failure could lead to fluttering and subsequent structural failure of the empennage.
(d) What actions must I accomplish to address this problem? To address this problem, you must accomplish the following:
Actions
Compliance
Procedures
(1) Visually inspect the Initially inspect In accordance with forward and rear horizontal upon accumulating 8 British Aerospace stabilizer attachment bolts years on the
Jetstream Service and associated hardware for airframe or within Bulletin 55- corrosion (i.e., pitting or the next 6 calendar JA010941, Original a change of color in the months after the Issue: January 25, surface) and wear (damage) effective date of 2002. this AD, whichever occurs later. Repetitively inspect thereafter at intervals not to exceed 8 years
(2) If corrosion or wear is Prior to further In accordance with found during any inspection flight after the British Aerospace required in paragraph
inspection in which Jetstream Service (d)(1) of this AD, replace the damage was
Bulletin 55- or repair any damaged part found
JA010941, Original in accordance with the
Issue: January 25, procedures specified in the
2002. manufacturer's service bulletin.
(3) Visually inspect the Initially inspect In accordance with forward and rear horizontal upon accumulating 8 British Aerospace and vertical stabilizer years on the
Jetstream Service attachment fittings and the airframe or within Bulletin 55- forward eye bolts of the the next 6 calendar JA010941, Original vertical stabilizer for months after the Issue: January 25, corrosion or damage at the effective date of 2002. lug faces.
this AD, whichever occurs later. Repetitively inspect thereafter at intervals not to exceed 8 years
(4) If corrosion or damage Prior to further Repair in accordance is found during any
flight after the the scheme obtained inspection required in
inspection in which from British paragraph (d)(3) of this the damage was
Aerospace Regional AD:
found
Aircraft, Prestwick (i) replace or repair any
International damaged part in accordance
Airport, Ayrshire, with the procedures
KA9 2RW, Scotland, specified in the
Obtain this repair manufacturer's service
scheme through the bulletin; or.
FAA at the address (ii) if damage exceeds the
specified in limits defined in the
paragraph (f) of manufacturer's service
this AD. bulletin, obtain a repair scheme from the manufacturer through the FAA at the address specified in paragraph (f) of this AD; and. (iii) incorporate this repair scheme.
Note 1: Although not required by this AD, FAA highly recommends you accomplish Section 2, Part B, Highly Recommended Corrosion Prevention Tasks, of the manufacturer's service bulletin.
(e) Can I comply with this AD in any other way? You may use an alternative method of compliance or adjust the compliance time if:
(1) Your alternative method of compliance provides an equivalent level of safety; and
(2) The Standards Office Manager, Small Airplane Directorate, approves your alternative. Submit your request through an FAA Principal Maintenance Inspector, who may add comments and then send it to the Standards Office Manager.
Note 2: This AD applies to each airplane identified in paragraph (a) of this AD, regardless of whether it has been modified,
[[Page 49630]]
altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/operator must request approval for an alternative method of compliance in accordance with paragraph (e) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if you have not eliminated the unsafe condition, specific actions you propose to address it.
(f) Where can I get information about any already-approved alternative methods of compliance? Contact Doug Rudolph, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4059; facsimile: (816) 329-4090.
(g) What if I need to fly the airplane to another location to comply with this AD? The FAA can issue a special flight permit under sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate your airplane to a location where you can accomplish the requirements of this AD.
(h) How do I get copies of the documents referenced in this AD? You may get copies of the documents referenced in this AD from British Aerospace Regional Aircraft, Prestwick International Airport, Ayrshire, KA9 2RW, Scotland; telephone: (01292) 672345; facsimile: (01292) 671625. You may view these documents at FAA, Central Region, Office of the Regional Counsel, 901 Locust, Room 506, Kansas City, Missouri 64106.
Note 3: The subject of this AD is addressed in British Aerospace Jetstream Service Bulletin 55-JA010941, Original Issue: January 25, 2002. This service bulletin is classified as mandatory by the United Kingdom Civil Aviation Authority (CAA).
Issued in Kansas City, Missouri, on July 23, 2002. Michael Gallagher, Manager, Small Airplane Directorate, Aircraft Certification Service.
[FR Doc. 02-19255Filed7-30-02; 8:45 am]
BILLING CODE 4910-13-P
