Airworthiness Directives; Fokker Services B.V. Airplanes

Federal Register, Volume 82 Issue 233 (Wednesday, December 6, 2017)

Federal Register Volume 82, Number 233 (Wednesday, December 6, 2017)

Rules and Regulations

Pages 57537-57539

From the Federal Register Online via the Government Publishing Office www.gpo.gov

FR Doc No: 2017-26192

Page 57537

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

Docket No. FAA-2017-1097; Product Identifier 2013-NM-015-AD; Amendment 39-19117; AD 2017-25-03

RIN 2120-AA64

Airworthiness Directives; Fokker Services B.V. Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule; request for comments.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes. This AD requires contacting the FAA to obtain instructions for addressing the unsafe condition on these products, and doing the actions specified in those instructions. This AD was prompted by a report of sparks and an electrical smell on the flight deck of a Model F28 Mark 0070 airplane. We are issuing this AD to address the unsafe condition on these products.

DATES: This AD becomes effective December 21, 2017.

We must receive comments on this AD by January 22, 2018.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods:

Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the instructions for submitting comments.

Fax: 202-493-2251.

Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590.

Hand Delivery: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.

Examining the AD Docket

You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2017-

1097; or in person at the Docket Operations office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Operations office (telephone: 800-647-5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt.

FOR FURTHER INFORMATION CONTACT: Tom Rodriguez, Aerospace Engineer, International Section, Transport Standards Branch, FAA, 1601 Lind Avenue SW., Renton, WA 98057-3356; telephone: 425-227-1137; fax: 425-

227-1149.

SUPPLEMENTARY INFORMATION:

Discussion

The European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2013-0003, dated January 7, 2013 (referred to after this as the Mandatory Continuing Airworthiness Information, or ``the MCAI''), to correct an unsafe condition for all Fokker Services B.V. Model F28 Mark 0070 and 0100. The MCAI states:

Following a report of sparks and an electrical smell on the flight deck of an F28 Mark 0070 aeroplane, the investigation results revealed heat damage on several contacts of connector J 4222A/P 4222B, most likely caused by a degraded contact. An imbalance of the resistance of two contacts, used in parallel in the left-hand (LH) windshield heating system, resulted in a too high current. This overheated the contacts and caused carbonising, thereby creating a conductive path between the contacts of the LH windshield heating system and the LH sliding window heating system. The conductive path resulted in a too high voltage on the LH sliding window, causing overheating of the LH sliding window heating element.

This condition, if not detected and corrected, could lead to further cases of electrical overload, possibly resulting in failure of sliding window heating element(s) and consequent arcing, smoke and fire in the cockpit area.

Prompted by these findings, Fokker Services issued Service Bulletin (SB) SBF100-30-027 which introduces a modification of wiring distribution on the affected receptacles and plugs.

To correct this potential unsafe condition, Civil Aviation Authority--The Netherlands CAA-NL issued Dutch AD NL-2005-009 (EASA approval 2005-6043) which corresponds to FAA AD 2006-15-17, Amendment 39-14698 (71 FR 43033, July 31, 2006) to require modification of the wiring distribution of the AC Bus Transfer Power System and the Windshield Anti-Icing Systems, as specified in Fokker Services SBF100-30-027.

Since that Dutch AD was issued, Fokker Services found that, as the Accomplishment Instructions of SBF100-30-027 were divided in 5 blocks, an individual aeroplane (serial number) could be specified in one or more blocks. This led to confusion for operators and may have resulted in incomplete accomplishment of the modification as required by Dutch AD NL-2005-009.

Fokker Services SBF100-30-027 has now been revised to include a one-to one relation between each aeroplane and the applicable blocks in the Accomplishment Instructions.

For the reasons described above, this EASA AD requires a one-

time check of the work accomplished through Fokker Services SBF100-

30-027, a visual inspection of the contacts of connectors and, depending on findings, rework of the wiring.

You may examine the MCAI on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2017-

1097.

FAA's Determination and Requirements of This AD

This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to our bilateral agreement with the State of Design Authority, we have been notified of the unsafe condition described in the MCAI. We are issuing this AD because we evaluated all pertinent information and determined the unsafe condition exists and is likely to exist or develop on other products of the same type design.

FAA's Determination of the Effective Date

There are currently no domestic operators of this product. Therefore, we find that notice and opportunity for prior public comment are unnecessary and that good cause exists for making

Page 57538

this amendment effective in less than 30 days.

Comments Invited

This AD is a final rule that involves requirements affecting flight safety, and we did not precede it by notice and opportunity for public comment. We invite you to send any written relevant data, views, or arguments about this AD. Send your comments to an address listed under the ADDRESSES section. Include ``Docket No. FAA-2017-1097; Product Identifier 2013-NM-015-AD'' at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this AD. We will consider all comments received by the closing date and may amend this AD based on those comments.

We will post all comments we receive, without change, to http://www.regulations.gov, including any personal information you provide. We will also post a report summarizing each substantive verbal contact we receive about this AD.

Costs of Compliance

Currently, there are no affected U.S.-registered airplanes. This AD requires contacting the FAA to obtain instructions for addressing the unsafe condition, and doing the actions specified in those instructions. Based on the actions specified in the MCAI AD, we are providing the following cost estimates for an affected airplane that is placed on the U.S. Register in the future:

Estimated Costs

----------------------------------------------------------------------------------------------------------------

Action Labor cost Parts cost Cost per product

----------------------------------------------------------------------------------------------------------------

Maintenance record review............ 1 work-hour x $85 per $0 $85

hour = $85.

Inspection........................... Up to 76 work-hours x $0 Up to $6,460

$85 per hour = $6,460.

----------------------------------------------------------------------------------------------------------------

We estimate the following costs to do any necessary on-condition modification that would be required based on the results of the required actions:

On-Condition Costs

----------------------------------------------------------------------------------------------------------------

Action Labor cost Parts cost Cost per product

----------------------------------------------------------------------------------------------------------------

Modification......................... Up to 16 work-hours x $0 Up to $1,360

$85 per hour = $1,360.

----------------------------------------------------------------------------------------------------------------

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. ``Subtitle VII: Aviation Programs,'' describes in more detail the scope of the Agency's authority.

We are issuing this rulemaking under the authority described in ``Subtitle VII, Part A, Subpart III, Section 44701: General requirements.'' Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

This AD is issued in accordance with authority delegated by the Executive Director, Aircraft Certification Service, as authorized by FAA Order 8000.51C. In accordance with that order, issuance of ADs is normally a function of the Compliance and Airworthiness Division, but during this transition period, the Executive Director has delegated the authority to issue ADs applicable to transport category airplanes to the Director of the System Oversight Division.

Regulatory Findings

We determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

1. Is not a ``significant regulatory action'' under Executive Order 12866;

2. Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979);

3. Will not affect intrastate aviation in Alaska; and

4. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.

Adoption of the Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

Sec. 39.13 Amended

0

2. The FAA amends Sec. 39.13 by adding the following new airworthiness directive (AD):

2017-25-03 Fokker Services B.V.: Amendment 39-19117; Docket No. FAA-

2017-1097; Product Identifier 2013-NM-015-AD.

(a) Effective Date

This AD becomes effective December 21, 2017.

(b) Affected ADs

None.

(c) Applicability

This AD applies to Fokker Services B.V. Model F28 Mark 0070 and 0100 airplanes, certificated in any category, all manufacturer serial numbers.

(d) Subject

Air Transport Association (ATA) of America Code 30, Ice and rain protection.

Page 57539

(e) Reason

This AD was prompted by a report of sparks and an electrical smell on the flight deck of a Model F28 Mark 0070 airplane. We are issuing this AD to prevent an electrical overload in the windshield heating system, which could result in failure of a sliding window heating element and consequent arcing, smoke, and fire in the flight deck.

(f) Compliance

Comply with this AD within the compliance times specified, unless already done.

(g) Required Action(s)

Within 30 days after the effective date of this AD, request instructions from the Manager, International Section, Transport Standards Branch, FAA, to address the unsafe condition specified in paragraph (e) of this AD; and accomplish the actions at the times specified in, and in accordance with, those instructions. Guidance can be found in Mandatory Continuing Airworthiness Information (MCAI) European Aviation Safety Agency (EASA) AD 2013-0003, dated January 7, 2013.

(h) Alternative Methods of Compliance (AMOCs)

The Manager, International Section, Transport Standards Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the International Section, send it to the attention of the person identified in paragraph (i)(2) of this AD. Information may be emailed to: 9-ANM-116-AMOC-REQUESTS@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.

(i) Related Information

(1) Refer to MCAI EASA AD 2013-0003, dated January 7, 2013, for related information. You may examine the MCAI on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2017-1097.

(2) For more information about this AD, contact Tom Rodriguez, Aerospace Engineer, International Section, Transport Standards Branch, FAA, 1601 Lind Avenue SW., Renton, WA 98057-3356; telephone: 425-227-1137; fax: 425-227-1149.

(j) Material Incorporated by Reference

None.

Issued in Renton, Washington, on November 21, 2017.

Jeffrey E. Duven,

Director, System Oversight Division, Aircraft Certification Service.

FR Doc. 2017-26192 Filed 12-5-17; 8:45 am

BILLING CODE 4910-13-P

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT