Airworthiness Directives; The Boeing Company Airplanes

Federal Register, Volume 81 Issue 32 (Thursday, February 18, 2016)

Federal Register Volume 81, Number 32 (Thursday, February 18, 2016)

Rules and Regulations

Pages 8138-8140

From the Federal Register Online via the Government Publishing Office www.gpo.gov

FR Doc No: 2016-03217

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

Docket No. FAA-2015-3630; Directorate Identifier 2014-NM-253-AD; Amendment 39-18397; AD 2016-04-03

RIN 2120-AA64

Airworthiness Directives; The Boeing Company Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 747-400F series airplanes. This AD was prompted by an analysis of the production methods used to increase fatigue resistance of the upper closure fittings at the nose cargo door portal's C-3 frame, which showed that cracking could start too early to be caught in a timely manner by the inspection or maintenance program. This AD requires inspections of the upper closure fitting and connected strap and doubler at the nose cargo door portal for cracking, and related investigative and corrective actions if necessary. We are issuing this AD to detect and correct such cracking, which could result in sudden decompression and loss of the airplane's structural integrity.

DATES: This AD is effective March 24, 2016.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of March 24, 2016.

ADDRESSES: For service information identified in this final rule, contact Boeing Commercial Airplanes, Attention: Data & Services Management, P.O. Box 3707, MC 2H-65, Seattle, WA 98124-2207; telephone 206-544-5000, extension 1; fax 206-766-5680; Internet https://www.myboeingfleet.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221. It is also available on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2015-

3630.

Examining the AD Docket

You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2015-

3630; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The address for the Docket Office (phone: 800-647-

5527) is Docket Management Facility, U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Bill Ashforth, Aerospace Engineer, Airframe Branch, ANM-120S, FAA, Seattle Aircraft Certification Office (ACO), 1601 Lind Avenue SW., Renton, WA 98057-3356; phone: 425-917-

6432; fax: 425-917-6590; email: bill.ashforth@faa.gov.

SUPPLEMENTARY INFORMATION:

Discussion

We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all The Boeing Company Model 747-400F series airplanes. The NPRM published in the Federal Register on September 15, 2015 (80 FR 55273) (``the NPRM''). The NPRM was prompted by a report indicating that an analysis of the production methods used to increase fatigue resistance of the upper closure fittings at the nose cargo door portal's C-3 frame showed that cracking could start too early to be caught in a timely manner by the inspection or maintenance program. The upper closure fittings used in the nose cargo door portal C-3 frame were shot peened to increase fatigue resistance. However, an analysis showed that the increase in

Page 8139

fatigue resistance was still not enough to ensure that cracking would be caught by the inspection program specified in the Boeing 747-400 maintenance planning data (MPD) document. The NPRM proposed to require inspections of the upper closure fitting and connected strap and doubler at the nose cargo door portal for cracking, and related investigative and corrective actions if necessary. We are issuing this AD to detect and correct such cracking, which could result in sudden decompression and loss of the airplane's structural integrity.

Comments

We gave the public the opportunity to participate in developing this AD. We considered the comment received. Boeing supported the NPRM.

Conclusion

We reviewed the relevant data, considered the comment received, and determined that air safety and the public interest require adopting this AD as proposed except for minor editorial changes. We have determined that these minor changes:

Are consistent with the intent that was proposed in the NPRM for correcting the unsafe condition; and

Do not add any additional burden upon the public than was already proposed in the NPRM.

Related Service Information Under 1 CFR Part 51

We reviewed Boeing Alert Service Bulletin 747-53A2880, dated December 3, 2014. This service information describes procedures for a detailed inspection of the upper closure fitting and connected strap and doubler, a surface high frequency eddy current (HFEC) inspection of the upper closure fitting for cracking, and related investigative and corrective actions. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

Costs of Compliance

We estimate that this AD affects 38 airplanes of U.S. registry.

We estimate the following costs to comply with this AD:

Estimated Costs

----------------------------------------------------------------------------------------------------------------

Cost on U.S.

Action Labor cost Parts cost Cost per product operators

----------------------------------------------------------------------------------------------------------------

Inspections.................... 9 work-hours x $85 per $0............... $765 per $29,070 per

hour = $765 per inspection cycle. inspection

inspection cycle. cycle.

----------------------------------------------------------------------------------------------------------------

We estimate the following costs to do any necessary repairs or replacements that would be required based on the results of the inspection. Parts costs could be up to $42,930 per airplane. We have no way of determining the number of work hours (because the type of repair will vary depending on findings) or the number of aircraft that might need the repairs or replacements.

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: ``General requirements.'' Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a ``significant regulatory action'' under Executive Order 12866,

(2) Is not a ``significant rule'' under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979),

(3) Will not affect intrastate aviation in Alaska, and

(4) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.

Adoption of the Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

Sec. 39.13 Amended

0

2. The FAA amends Sec. 39.13 by adding the following new airworthiness directive (AD):

2016-04-03 The Boeing Company: Amendment 39-18397; Docket No. FAA-

2015-3630; Directorate Identifier 2014-NM-253-AD.

(a) Effective Date

This AD is effective March 24, 2016.

(b) Affected ADs

None.

(c) Applicability

This AD applies to all The Boeing Company Model 747-400F series airplanes, certificated in any category, as identified in paragraph 1.A., ``Effectivity,'' of Boeing Alert Service Bulletin 747-53A2880, dated December 3, 2014.

(d) Subject

Air Transport Association (ATA) of America Code 53, Fuselage.

(e) Unsafe Condition

This AD was prompted by a report that an analysis of the production methods used to increase fatigue resistance of the upper closure fittings at the nose cargo door portal's C-3 frame showed that cracking could still start too early to be caught in a timely

Page 8140

manner by the inspection or maintenance program. We are issuing this AD to detect and correct such cracking, which could result in sudden decompression and loss of the airplane's structural integrity.

(f) Compliance

Comply with this AD within the compliance times specified, unless already done.

(g) Inspections and Corrective Actions

Except as required by paragraph (h) of this AD: At the applicable time specified in paragraph 1.E., ``Compliance,'' of Boeing Alert Service Bulletin 747-53A2880, dated December 3, 2014, do a detailed inspection of the upper closure fitting, strap, and doubler and a surface high frequency eddy current (HFEC) inspection of the upper closure fitting at the nose cargo door portal for cracking, and do all applicable related investigative and corrective actions, in accordance with the Accomplishment Instructions of Boeing Alert Service Bulletin 747-53A2880, dated December 3, 2014. Repeat the inspections at the time specified in paragraph 1.E., ``Compliance,'' of Boeing Alert Service Bulletin 747-53A2880, dated December 3, 2014. Do the applicable related investigative and corrective actions at the times specified in paragraph 1.E., ``Compliance,'' of Boeing Alert Service Bulletin 747-53A2880, dated December 3, 2014.

(h) Exceptions to the Service Information

(1) Where paragraph 1.E., ``Compliance,'' of Boeing Alert Service Bulletin 747-53A2880, dated December 3, 2014, refers to a compliance time ``after the original issue date of this service bulletin,'' this AD requires compliance within the specific compliance time after the effective date of this AD.

(2) If any crack is found during any inspection required by this AD, and Boeing Alert Service Bulletin 747-53A2880, dated December 3, 2014, specifies to contact Boeing for appropriate action: Before further flight, repair the cracking using a method approved in accordance with the procedures specified in paragraph (i) of this AD.

(i) Alternative Methods of Compliance (AMOCs)

(1) The Manager, Seattle Aircraft Certification Office (ACO), FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the ACO, send it to the attention of the person identified in paragraph (j)(1) of this AD. Information may be emailed to: 9-ANM-Seattle-ACO-AMOC-Requests@faa.gov.

(2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.

(3) An AMOC that provides an acceptable level of safety may be used for any repair, modification, or alteration required by this AD if it is approved by the Boeing Commercial Airplanes Organization Designation Authorization (ODA) that has been authorized by the Manager, Seattle ACO, to make those findings. For a repair method to be approved, the repair method, modification deviation, or alteration deviation must meet the certification basis of the airplane, and the approval must specifically refer to this AD.

(4) Except as required by paragraph (h)(2) of this AD: For service information that contains steps that are labeled as Required for Compliance (RC), the provisions of paragraphs (i)(4)(i) and (i)(4)(ii) of this AD apply.

(i) The steps labeled as RC, including substeps under an RC step and any figures identified in an RC step, must be done to comply with the AD. An AMOC is required for any deviations to RC steps, including substeps and identified figures.

(ii) Steps not labeled as RC may be deviated from using accepted methods in accordance with the operator's maintenance or inspection program without obtaining approval of an AMOC, provided the RC steps, including substeps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition.

(j) Related Information

For more information about this AD, contact Bill Ashforth, Aerospace Engineer, Airframe Branch, ANM-120S, FAA, Seattle ACO, 1601 Lind Avenue SW., Renton, WA 98057-3356; phone: 425-917-6432; fax: 425-917-6590; email: bill.ashforth@faa.gov.

(k) Material Incorporated by Reference

(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this service information as applicable to do the actions required by this AD, unless the AD specifies otherwise.

(i) Boeing Alert Service Bulletin 747-53A2880, dated December 3, 2014.

(ii) Reserved.

(3) For service information identified in this AD, contact Boeing Commercial Airplanes, Attention: Data & Services Management, P.O. Box 3707, MC 2H-65, Seattle, WA 98124-2207; telephone 206-544-

5000, extension 1; fax 206-766-5680; Internet https://www.myboeingfleet.com.

(4) You may view this service information FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221.

(5) You may view this service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr-locations.html.

Issued in Renton, Washington, on February 8, 2016.

Michael Kaszycki,

Acting Manager, Transport Airplane Directorate, Aircraft Certification Service.

FR Doc. 2016-03217 Filed 2-17-16; 8:45 am

BILLING CODE 4910-13-P

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT