State authority delegations: Pennsylvania,

[Federal Register: September 13, 2001 (Volume 66, Number 178)]

[Proposed Rules]

[Page 47611-47612]

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

[DOCID:fr13se01-22]

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Parts 63

[PA001-1000; FRL-7056-1]

Approval of Section 112(l) Authority for Hazardous Air Pollutants; State of Pennsylvania; Department of Environmental Protection

AGENCY: Environmental Protection Agency (EPA).

ACTION: Proposed rule.

SUMMARY: EPA is proposing to approve Pennsylvania Department of Environmental Protection's (PADEP's) request for delegation of authority to implement and enforce its hazardous air pollutant regulations for perchloroethylene drycleaning facilities, hard and decorative chromium electroplating and chromium anodizing tanks, ethylene oxide sterilization facilities, halogenated solvent cleaning and secondary lead smelting which have been adopted by reference from the Federal requirements set forth in the Code of Federal Regulations. This proposed approval will automatically delegate future amendments to these regulations. In addition, EPA is proposing to approve of PADEP's mechanism for receiving delegation of future hazardous air pollutant regulations which it adopts unchanged from the Federal requirements. This mechanism entails submission of a delegation request letter to EPA following EPA notification of a new Federal requirement. This action pertains only to sources which are not required to obtain a Clean Air Act operating permit. In the Final Rules section of this Federal Register, EPA is approving the State's request for delegation of authority as a direct final rule without prior proposal because the Agency views this as a noncontroversial submittal and anticipates no adverse comments. A detailed rationale for the approval is set forth in the direct final rule. If no adverse comments are received in response to this action, no further activity is contemplated. If EPA receives adverse comments, the direct final rule will be withdrawn and all public comments received will be addressed in a subsequent final rule based on this proposed rule. EPA will not institute a second comment period. Any parties interested in commenting on this action should do so at this time.

DATES: Written comments must be received on or before October 15, 2001.

ADDRESSES: Written comments on this action should be sent concurrently to: Makeba A. Morris, Chief, Permits and Technical Assessment Branch, Mail Code 3AP11, Air Protection Division, U.S. Environmental Protection Agency, Region III, 1650 Arch Street, Philadelphia, PA 19103-2029, and James M. Salvaggio, Director, Pennsylvania Department of Environmental Protection, Bureau of Air Quality, P.O. Box 8468, 400 Market Street, Harrisburg, Pennsylvania 17105. Copies of the documents relevant to this action are available for public inspection during normal business hours at the Air Protection Division, U.S. Environmental Protection Agency, Region III, 1650 Arch Street, Philadelphia, Pennsylvania 19103 and the Pennsylvania Department of Environmental Protection, Bureau of Air Quality, P.O. Box 8468, 400 Market Street, Harrisburg, Pennsylvania 17105.

[[Page 47612]]

FOR FURTHER INFORMATION CONTACT: Dianne J. McNally, 215-814-3297, at the EPA Region III address above, or by e-mail at mcnally.dianne@epa.gov.

SUPPLEMENTARY INFORMATION: For further information on this action, pertaining to approval of PADEP's delegation of authority for the hazardous air pollutant emission standards for perchloroethylene dry cleaning facilities, hard and decorative chromium electroplating and chromium anodizing tanks, ethylene oxide sterilizers, halogenated solvent cleaning and secondary lead smelters (Clean Air Act section 112), please see the information provided in the direct final action, with the same title, that is located in the ``Rules and Regulations'' section of this Federal Register publication.

Dated: September 5, 2001. Judith M. Katz, Director, Air Protection Division, Region III.

[FR Doc. 01-22991Filed9-12-01; 8:45 am]

BILLING CODE 6560-50-P