Airworthiness Directives: Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
Federal Register: October 1, 2008 (Volume 73, Number 191)
Rules and Regulations
Page 56956-56958
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
DOCID:fr01oc08-4
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration 14 CFR Part 39
Docket No. FAA-2008-0149; Directorate Identifier 2007-NM-319-AD;
Amendment 39-15651; AD 2008-17-13
RIN 2120-AA64
Airworthiness Directives; Boeing Model 737-100, -200, -200C, - 300, -400, and -500 Series Airplanes
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final rule.
SUMMARY: We are adopting a new airworthiness directive (AD) for certain
Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD requires replacing the existing straight-to-90- degree hose assembly for the Lavatory ``A'' water supply. The replacement is a new straight hose assembly and a separate 90-degree elbow fitting. This AD results from a report of a separated hose assembly for the passenger water system. We are issuing this AD to prevent a water leak into the flight deck ceiling, which could result in an electrical short and possible loss of several functions essential to safe flight.
DATES: This AD is effective November 5, 2008.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of November 5, 2008.
ADDRESSES: For service information identified in this AD, contact
Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124- 2207.
Examining the AD Docket
You may examine the AD docket on the Internet at http:// www.regulations.gov; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The address for the
Docket Office (telephone 800-647-5527) is the Document Management
Facility, U.S. Department of Transportation, Docket Operations, M-30,
West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue, SE.,
Washington, DC 20590.
FOR FURTHER INFORMATION CONTACT: Marcia Smith, Aerospace Engineer,
Cabin Safety and Environmental Systems Branch, ANM-150S, FAA, Seattle
Aircraft Certification Office, 1601 Lind Avenue, SW., Renton,
Washington 98057-3356; telephone (425) 917-6484; fax (425) 917-6590.
SUPPLEMENTARY INFORMATION:
Discussion
We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to include an airworthiness directive (AD) that would apply to certain Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. That NPRM was published in the Federal Register on February 8, 2008 (73 FR 7488). That NPRM proposed to require replacing the existing straight-to-90-degree hose assembly for the Lavatory ``A'' water supply. The replacement is a new straight hose assembly and a separate 90-degree elbow fitting.
Comments
We gave the public the opportunity to participate in developing this AD. We considered the comments received from the four commenters.
Support for the NPRM
Boeing concurs with the contents of the proposed rule. Air
Transport Association, on behalf of its member, United Airlines (UA), states that UA supports the proposed rule as drafted.
Margie Tillotson, a private citizen, has no objections to the NPRM.
Requests To Address Parts Manufacturer Approval (PMA) Parts
Aviation Data Research (ADR) and Modification and Replacement Parts
Association (MARPA), make several comments related to PMA parts. ADR and MARPA state that the NPRM should be modified to embrace PMA alternatives to the original equipment
Page 56957
manufacturer (OEM) part numbers listed in Boeing Alert Service Bulletin 737-38A1054, dated August 23, 2007 (which we cited as the appropriate source of service information for accomplishing the proposed actions).
ADR states that two parts could conceivably be affected by the design problems underlying the proposed action: In 1992 Parker Hannifin obtained a PMA on part number (P/N) 3112002-139 by licensure to produce a replacement part for P/N 10-60871-139; in 1996 Crane Resistoflex obtained a PMA on P/N R 23582-0366 by licensure to produce a replacement part for P/N 10-60871-125.
ADR points out that under the wording of the NPRM, these parts, which presumably suffer the same defects as the OEM part, can be installed in place of the OEM parts. In contrast, MARPA states that it would appear that installation of PMA alternatives is forbidden, and that it is presumptuous to assume that the PMA alternatives are likely to be defective. ADR and MARPA request that the NPRM be revised to cover possible defective PMA alternative parts. MARPA adds that the AD should explicitly permit the installation of other FAA-approved replacement or modification parts. In addition, ADR states that there should be procedures ``within all AD writing units'' to perform PMA research any time a particular part number is affected by a discovered defect.
The FAA recognizes the need for standardization of issues related to PMA parts to which the commenter refers, and is currently in the process of reviewing issues that address the use of PMAs in ADs at the national level. However, the Transport Airplane Directorate considers that to delay this particular AD action would be inappropriate, since we have determined that an unsafe condition exists and that replacement of certain parts must be accomplished to ensure continued safety.
Therefore, no change has been made to the final rule in this regard.
We have evaluated the PMA part numbers to which the commenter refers. As a point of clarification, the part numbers that the commenter mentions, Boeing P/N 10-60871-139 (PMA replacement P/N 3112002-139) and Boeing P/N 10-60871-125 (PMA replacement P/N R 23582- 0366), are replaced only at the location affected by the AD because of a change in design for that location. (These parts may be installed at other locations, and the continued use of these parts at those locations is acceptable.) We have found that Stratoflex makes replacements for both P/N 10-60871-139 and P/N 10-60871-125. Stratoflex
(originally Crane Resistoflex) P/N 23582-0366, which is a replacement for Boeing P/N 10-60871-125, is not in production but some of these parts may be installed at the location affected by this AD. PMA P/N 3112002-139 and PMA P/N R 23582-0366 are marked with both the Boeing part number and the PMA part number. Therefore, the requirements of the
AD apply to these PMA parts and the PMA parts must be removed from service at the location affected by the AD. No change has been made to the final rule in this regard.
Request To Make Service Information Publicly Available
MARPA points out that, since Boeing Alert Service Bulletin 737- 38A1054 is not on the public record, it does not seem to meet the criteria for incorporation by reference, in which the document must be reasonably available to and usable by the persons affected by the publication. MARPA states that the regulated industry has repeatedly complained about unavailability of service information.
We infer that MARPA would like us to make Boeing service information available online. We are currently in the process of reviewing issues surrounding the posting of service bulletins online as part of an online AD docket. Once we have thoroughly examined all aspects of this issue and have made a final determination, we will consider whether our current practice needs to be revised. In the meantime, these documents are available for public review at the locations specified in paragraph (i)(3) of this AD. Further questions regarding publication of documents in the Federal Register or incorporation by reference should be directed to the OFR. No change to the final rule is necessary in response to this comment.
Conclusion
We reviewed the relevant data, considered the comments received, and determined that air safety and the public interest require adopting the AD as proposed.
Costs of Compliance
We estimate that this AD affects 779 airplanes of U.S. registry. We also estimate that it takes between 4 and 7 work-hours per airplane to comply with this AD, depending on the airplane configuration. The average labor rate is $80 per work-hour. Required parts cost about $400 per product. Based on these figures, we estimate the cost of this AD to the U.S. operators to be between $560,880 and $747,840, or between $720 and $960 per product.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. ``Subtitle VII: Aviation
Programs,'' describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in
``Subtitle VII, Part A, Subpart III, Section 44701: General requirements.'' Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a ``significant regulatory action'' under Executive
Order 12866,
(2) Is not a ``significant rule'' under DOT Regulatory Policies and
Procedures (44 FR 11034, February 26, 1979), and
(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
You can find our regulatory evaluation and the estimated costs of compliance in the AD Docket.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.
Adoption of the Amendment 0
Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES 0 1. The authority citation for part 39 continues to read as follows:
Page 56958
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended] 0 2. The FAA amends Sec. 39.13 by adding the following new AD: 2008-17-13 Boeing: Amendment 39-15651. Docket No. FAA-2008-0149;
Directorate Identifier 2007-NM-319-AD.
Effective Date
(a) This airworthiness directive (AD) is effective November 5, 2008.
Affected ADs
(b) None.
Applicability
(c) This AD applies to Boeing Model 737-100, -200, -200C, -300,
-400, and -500 series airplanes, certificated in any category; as identified in Boeing Alert Service Bulletin 737-38A1054, dated
August 23, 2007.
Unsafe Condition
(d) This AD results from a report of a separated hose assembly for the passenger water system. We are issuing this AD to prevent a water leak into the flight deck ceiling, which could result in an electrical short and possible loss of several functions essential to safe flight.
Compliance
(e) Comply with this AD within the compliance times specified, unless already done.
Replacement
(f) Within 60 months after the effective date of this AD, replace the existing straight-to-90-degree hose assembly for the
Lavatory ``A'' water supply with a new straight hose assembly and a separate 90-degree elbow fitting, in accordance with the
Accomplishment Instructions of Boeing Alert Service Bulletin 737- 38A1054, dated August 23, 2007.
Parts Installation
(g) As of the effective date of this AD, any hose assembly part having a part number identified in Table 1 of this AD must not be used in any location that is subject to the requirements of this AD.
However, those parts may be used in other locations if not otherwise prohibited.
Table 1--Spare Parts Prohibited for This AD
Airplane group identified in Boeing
Alert Service Bulletin 737-38A1054,
Existing part number(s) dated August 23, 2007
1 and 2................................ 10-61998-430, AS4471-08-0401, or AS4471-08-0404. 3...................................... 10-61998-25 or 10-60871-125. 4...................................... 10-61998-31 or 10-60871-139.
Alternative Methods of Compliance (AMOCs)
(h)(1) The Manager, Seattle Aircraft Certification Office, FAA,
ATTN: Marcia Smith, Aerospace Engineer, Cabin Safety and
Environmental Systems Branch, ANM-150S, 1601 Lind Avenue, SW.,
Renton, Washington 98057-3356; telephone (425) 917-6484; fax (425) 917-6590; has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19.
(2) To request a different method of compliance or a different compliance time for this AD, follow the procedures in 14 CFR 39.19.
Before using any approved AMOC on any airplane to which the AMOC applies, notify your appropriate principal inspector (PI) in the FAA
Flight Standards District Office (FSDO), or lacking a PI, your local
FSDO.
Material Incorporated by Reference
(i) You must use Boeing Alert Service Bulletin 737-38A1054, dated August 23, 2007, to do the actions required by this AD, unless the AD specifies otherwise.
(1) The Director of the Federal Register approved the incorporation by reference of this service information under 5
U.S.C. 552(a) and 1 CFR part 51.
(2) For service information identified in this AD, contact
Boeing Commercial Airplanes, P.O. Box 3707, Seattle, Washington 98124-2207.
(3) You may review copies of the service information incorporated by reference at the FAA, Transport Airplane
Directorate, 1601 Lind Avenue, SW., Renton, Washington; or at the
National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_ regulations/ibr_locations.html.
Issued in Renton, Washington, on August 6, 2008.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification
Service.
FR Doc. E8-22649 Filed 9-30-08; 8:45 am
BILLING CODE 4910-13-P
