Antidumping: Carbon and alloy seamless standard, line, and pressure pipe (under 4 1/2) inches from Various countries,
[Federal Register: September 7, 2005 (Volume 70, Number 172)]
[Notices]
[Page 53151-53153]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr07se05-40]
DEPARTMENT OF COMMERCE
International Trade Administration
[A-851-802, A-485 805, A-588-851, A-791-808]
Carbon and Alloy Seamless Standard, Line, and Pressure Pipe (Under 4 [frac1s2] inches) from the Czech Republic, Japan, Romania, and South Africa; Final Results of the Expedited Sunset Reviews of the Antidumping Duty Orders
AGENCY: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: On May 2, 2005, the Department of Commerce (the Department) initiated sunset reviews of the antidumping duty orders on certain carbon and alloy seamless standard, line, and pressure pipe (under 4
[frac1s2] inches) (seamless pipe) from the Czech Republic, Japan, Romania, and South Africa pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). On the basis of a notice of intent to participate and adequate substantive responses filed on behalf of domestic interested parties and no response from respondent interested parties, the Department conducted expedited (120-day) sunset reviews. As a result of these sunset reviews, the Department finds that revocation of the antidumping duty orders would likely lead to the continuation or recurrence of dumping. The dumping margins are identified in the Final Results of Review section of this notice.
EFFECTIVE DATE: September 7, 2005.
FOR FURTHER INFORMATION Dana Mermelstein, AD/CVD Operations, Office 6, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230, telephone (202) 482-1391.
SUPPLEMENTARY INFORMATION:
Background
On May 2, 2005, the Department initiated sunset reviews of the antidumping duty orders on seamless pipe from the Czech Republic, Japan,
[[Page 53152]]
Romania, and South Africa pursuant to section 751(c) of the Act. See Initiation of Five-year (``Sunset'') Reviews, 70 FR 22632 (May 2, 2005). The Department received notices of intent to participate from two domestic interested parties, United States Steel Corporation (U.S. Steel) and Koppel Steel Corporation (Koppel Steel) (collectively, domestic interested parties), within the deadline specified in section 351.218(d)(1)(i) of the Department's regulations. Domestic interested parties claimed interested party status under section 771(9)(C) of the Act as U.S. producers of the domestic like product. We received complete substantive responses from the domestic interested parties within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i). However, we did not receive any response from any respondent interested parties. As a result, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), the Department conducted expedited sunset reviews of these orders.
Scope of the Orders
The products covered by the orders are seamless carbon and alloy (other than stainless) steel standard, line, and pressure pipes and redraw hollows produced, or equivalent, to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and the API 5L specifications and meeting the physical parameters described below, regardless of application. The scope of the orders also includes all products used in standard, line, or pressure pipe applications and meeting the physical parameters described below, regardless of specification. Specifically included within the scope of the orders are seamless pipes and redraw hollows, less than or equal to 4.5 inches (114.3 mm) in outside diameter, regardless of wall-thickness, manufacturing process (hot finished or cold-drawn), end finish (plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish.
The seamless pipes subject to the orders are currently classifiable under the subheadings 7304.10.10.20, 7304.10.50.20, 7304.31.30.00, 7304.31.60.50, 7304.39.00.16, 7304.39.00.20, 7304.39.00.24, 7304.39.00.28, 7304.39.00.32, 7304.51.50.05, 7304.51.50.60, 7304.59.60.00, 7304.59.80.10, 7304.59.80.15, 7304.59.80.20, and 7304.59.80.25 of the Harmonized Tariff Schedule of the United States (HTSUS).
Specifications, Characteristics, and Uses: Seamless pressure pipes are intended for the conveyance of water, steam, petrochemicals, chemicals, oil products, natural gas and other liquids and gases in industrial piping systems. They may carry these substances at elevated pressures and temperatures and may be subject to the application of external heat. Seamless carbon steel pressure pipe meeting the ASTM A- 106 standard may be used in temperatures of up to 1000 degrees Fahrenheit, at various ASME code stress levels. Alloy pipes made to ASTM A-335 standard must be used if temperatures and stress levels exceed those allowed for ASTM A-106. Seamless pressure pipes sold in the United States are commonly produced to the ASTM A-106 standard.
Seamless standard pipes are most commonly produced to the ASTM A-53 specification and generally are not intended for high temperature service. They are intended for the low temperature and pressure conveyance of water, steam, natural gas, air and other liquids and gases in plumbing and heating systems, air conditioning units, automatic sprinkler systems, and other related uses. Standard pipes (depending on type and code) may carry liquids at elevated temperatures but must not exceed relevant ASME code requirements. If exceptionally low temperature uses or conditions are anticipated, standard pipe may be manufactured to ASTM A-333 or ASTM A-334 specifications.
Seamless line pipes are intended for the conveyance of oil and natural gas or other fluids in pipe lines. Seamless line pipes are produced to the API 5L specification.
Seamless water well pipe (ASTM A-589) and seamless galvanized pipe for fire protection uses (ASTM A-795) are used for the conveyance of water.
Seamless pipes are commonly produced and certified to meet ASTM A- 106, ASTM A-53, API 5L-B, and API 5L-X42 specifications. To avoid maintaining separate production runs and separate inventories, manufacturers typically triple or quadruple certify the pipes by meeting the metallurgical requirements and performing the required tests pursuant to the respective specifications. Since distributors sell the vast majority of this product, they can thereby maintain a single inventory to service all customers.
The primary application of ASTM A-106 pressure pipes and triple or quadruple certified pipes is use in pressure piping systems by refineries, petrochemical plants, and chemical plants. Other applications are in power generation plants (electrical-fossil fuel or nuclear), and in some oil field uses (on shore and off shore) such as for separator lines, gathering lines and metering runs. A minor application of this product is for use as oil and gas distribution lines for commercial applications. These applications constitute the majority of the market for the subject seamless pipes. However, ASTM A- 106 pipes may be used in some boiler applications.
Redraw hollows are any unfinished pipe or ``hollow profiles'' of carbon or alloy steel transformed by hot rolling or cold drawing/ hydrostatic testing or other methods to enable the material to be sold under ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and API 5L specifications.
The scope of the orders includes all seamless pipe meeting the physical parameters described above and produced to one of the specifications listed above, regardless of application, with the exception of the specific exclusions discussed below, and whether or not also certified to a non-covered specification. Standard, line, and pressure applications and the above-listed specifications are defining characteristics of the scope of the orders. Therefore, seamless pipes meeting the physical description above, but not produced to the ASTM A- 53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A- 795, and API 5L specifications shall be covered if used in a standard, line, or pressure application, with the exception of the specific exclusions discussed below. For example, there are certain other ASTM specifications of pipe which, because of overlapping characteristics, could potentially be used in ASTM A-106 applications. These specifications generally include ASTM A-161, ASTM A-192, ASTM A-210, ASTM A-252, ASTM A-501, ASTM A-523, ASTM A-524, and ASTM A-618. When such pipes are used in a standard, line, or pressure pipe application, with the exception of the specific exclusions discussed below, such products are covered by the scope of the orders.
Specifically excluded from the scope of the orders are boiler tubing and mechanical tubing, if such products are not produced to ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and API 5L specifications and are not used in standard, line, or pressure pipe applications. In addition, finished and unfinished oil country tubular goods (OCTG) are excluded from the scope of the orders, if covered by the scope of another antidumping duty order from the same country. If not covered by such an OCTG order, finished and unfinished OCTG are
[[Page 53153]]
included in this scope when used in standard, line or pressure applications.
With regard to the excluded products listed above, the Department will not instruct U.S. Customs and Border Protection (CBP) to require end-use certification until such time as petitioner or other interested parties provide to the Department a reasonable basis to believe or suspect that the products are being used in a covered application. If such information is provided, we will require end-use certification only for the product(s) (or specification(s)) for which evidence is provided that such products are being used in covered applications as described above. For example, if, based on evidence provided by petitioner, the Department finds a reasonable basis to believe or suspect that seamless pipe produced to the A-161 specification is being used in a standard, line or pressure application, we will require end- use certifications for imports of that specification. Normally we will require only the importer of record to certify to the end use of the imported merchandise. If it later proves necessary for adequate implementation, we may also require producers who export such products to the United States to provide such certification on invoices accompanying shipments to the United States.
Although the HTSUS subheadings are provided for convenience and customs purposes, our written description of the merchandise subject to this scope is dispositive.
Analysis of Comments Received
All issues raised in these cases are addressed in the ``Issues and Decision Memorandum'' from Barbara E. Tillman, Acting Deputy Assistant Secretary for Import Administration, to Joseph A. Spetrini, Acting Assistant Secretary for Import Administration, dated August 30, 2005, (Decision Memorandum), which is hereby adopted by this notice. The issues discussed in the Decision Memorandum include the likelihood of continuation or recurrence of dumping and the magnitude of the margin likely to prevail if the orders are revoked. Parties can find a complete discussion of all issues raised in these sunset reviews and the corresponding recommendations in this public memorandum, which is on file in room B-099 of the main Department building.
In addition, a complete version of the Decision Memorandum can be accessed directly on the Web at http://ia.ita.doc.gov, under the
heading ``September 2005.'' The paper copy and electronic version of the Decision Memorandum are identical in content.
Final Results of Reviews
We determine that revocation of the antidumping duty orders on pipe fittings from the Czech Republic, Japan, Romania, and South Africa would likely lead to continuation or recurrence of dumping at the following percentage weighted-average margins:
Weighted- Manufacturers/Exporters/Producers
Average Margin (Percent)
Czech Republic......................................... Nova Hut, A.S..........................................
39.93 All Others.............................................
32.26 Japan.................................................. Nippon Steel Corporation...............................
106.07 Kawasaki Steel Corporation.............................
106.07 Sumitomo Metal Industries, Ltd.........................
106.07 All Others.............................................
70.43 Romania................................................ Metal Business International S.R.L.....................
11.08 S.C. Petrotub S.A......................................
11.08 S.C. Silcotub S.A......................................
15.15 Sota Communication Company.............................
15.15 All Others.............................................
13.06 South Africa........................................... Iscor Ltd..............................................
43.51 All Others.............................................
40.17
This notice also serves as the only reminder to parties subject to administrative protective orders (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305 of the Department's regulations. Timely notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.
We are issuing and publishing the results and notice in accordance with sections 751(c), 752, and 777(i)(1) of the Act.
Dated: August 30, 2005. Joseph A. Spetrini, Acting Assistant Secretary for Import Administration.
[FR Doc. E5-4868 Filed 9-6-05; 8:45 am]
BILLING CODE 3510-DS-S
