Certain Carbon and Alloy Steel Cut-To-Length Plate From the People's Republic of China: Final Affirmative Determination of Sales at Less Than Fair Value
Federal Register, Volume 82 Issue 16 (Thursday, January 26, 2017)
Federal Register Volume 82, Number 16 (Thursday, January 26, 2017)
Notices
Pages 8510-8513
From the Federal Register Online via the Government Publishing Office www.gpo.gov
FR Doc No: 2017-01710
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
A-570-047
Certain Carbon and Alloy Steel Cut-To-Length Plate From the People's Republic of China: Final Affirmative Determination of Sales at Less Than Fair Value
AGENCY: Enforcement and Compliance, International Trade Administration, Department of Commerce.
SUMMARY: The Department of Commerce (Department) determines that certain carbon and alloy steel cut-to-length plate (CTL plate) from the People's Republic of China (PRC) is being, or is likely to be, sold in the United States at less than fair value (LTFV). The final dumping margin of sales at LTFV is shown in the ``Final Determination'' section of this notice.
DATES: Effective January 26, 2017.
FOR FURTHER INFORMATION CONTACT: Irene Gorelik, AD/CVD Operations, Office VIII, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-6905.
SUPPLEMENTARY INFORMATION:
Background
On November 14, 2016, the Department published in the Federal Register its preliminary affirmative determination in the LTFV investigation of CTL plate from the PRC.\1\ For a complete description of the events that followed the Preliminary Determination, see the memorandum that is dated concurrently with this determination and hereby adopted by this notice.\2\
---------------------------------------------------------------------------
\1\ See Certain Carbon and Alloy Steel Cut-To-Length Plate from the People's Republic of China: Preliminary Affirmative Determination of Sales at Less Than Fair Value, 81 FR 79450 (November 14, 2016) (Preliminary Determination) and accompanying Preliminary Decision Memorandum.
\2\ See Memorandum from Gary Taverman, Associate Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, to Paul Piquado, Assistant Secretary for Enforcement and Compliance, re: ``Issues and Decision Memorandum for the Final Determination in the Antidumping Duty Investigation of Certain Carbon and Alloy Steel Cut-To-Length Plate from the People's Republic of China'' (``Issues and Decision Memorandum''), dated concurrently with this notice.
---------------------------------------------------------------------------
A summary of the events that occurred since the Department published the Preliminary Determination, as well as a full discussion of the issues raised by parties for this final determination, may be found in the Issues and Decision Memorandum. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov, and is available to all parties in the Central Records Unit, Room B8024 of the main Department of Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly at http://
Page 8511
enforcement.trade.gov/frn/. The signed Issues and Decision Memorandum and the electronic version are identical in content.
Period of Investigation
The period of investigation (POI) is October 1, 2015, through March 31, 2016.
Scope of the Investigation
The product covered by this investigation is CTL plate from the PRC. For a full description of the scope of this investigation, see the ``Scope of the Investigation'' in Appendix I of this notice. Prior to the Preliminary Determination, the Department issued a Preliminary Scope Decision Memorandum, followed by an Additional Preliminary Scope Decision Memorandum.\3\ Subsequently, various interested parties submitted case \4\ and rebuttal \5\ briefs concerning scope. The Department reviewed these briefs, considered the arguments therein, and is not making any additional changes to the scope of the investigation. For further discussion, see the Department's Final Scope Decision Memorandum.\6\ The scope in Appendix I reflects the final scope language.
---------------------------------------------------------------------------
\3\ See Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, ``Certain Carbon and Alloy Steel Cut-to-Length Plate from Austria, Belgium, Brazil, the People's Republic of China, France, the Federal Republic of Germany, Italy, Japan, the Republic of Korea, the Republic of South Africa, Taiwan, and Turkey: Scope Comments Decision Memorandum for the Preliminary Determinations,'' dated September 6, 2016 (Preliminary Scope Decision Memorandum), and Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, Certain Carbon and Alloy Steel Cut-to-Length Plate From Austria, Belgium, Brazil, the People's Republic of China, France, the Federal Republic of Germany, Italy, Japan, the Republic of Korea, the Republic of South Africa, Taiwan, and Turkey: Additional Scope Comments Preliminary Decision Memorandum and Extension of Deadlines for Scope Case Briefs and Scope Rebuttal Briefs,'' dated October 13, 2016 (Additional Preliminary Scope Decision Memorandum), respectively.
\4\ These parties include Misumi USA, Inc., PCS Company, Hitachi Metals, Ltd., Friedr. Lohmann GmbH, AG der Dillinger Huettenwerke, Dillinger France S.A., voestalpine AG, voestalpine Grobblech GmbH, voestalpine Steel & Service Center GmbH, Bohler Bleche GmbH & Co KG, Bohler Uddeholm Corporation, Simonds International Holding, Inc., and The KnifeSource LLC.
\5\ These parties include ArcelorMittal USA LLC, Nucor Corporation, and SSAB Enterprises, LLC (collectively, the petitioners).
\6\ See Memorandum to Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, ``Certain Carbon and Alloy Steel Cut-to-Length Plate from Austria, Belgium, Brazil, the People's Republic of China, France, the Federal Republic of Germany, Italy, Japan, the Republic of Korea, the Republic of South Africa, Taiwan, and Turkey: Final Scope Comments Decision Memorandum,'' dated November 29, 2016 (Final Scope Decision Memorandum).
---------------------------------------------------------------------------
Analysis of Comments Received
All issues raised in the case and rebuttal briefs that were submitted by parties in this investigation are addressed in either the Final Scope Decision Memorandum or the Issues and Decision Memorandum accompanying this notice, which is hereby adopted by this notice. A list of the issues addressed in the Issues and Decision Memorandum is attached to this notice at Appendix II.
Separate Rates
For the final determination, we continue to determine that Jiangyin Xingcheng Special Steel Works Co., Ltd., the sole mandatory respondent in this investigation, is not entitled to a separate rate, and is included within the PRC-wide entity.
PRC-Wide Entity
For the final determination, we continue to find that the PRC-wide entity, which includes certain PRC exporters and/or producers that did not respond to the Department's requests for information, failed to provide necessary information, failed to provide information in a timely manner, and significantly impeded this proceeding by not submitting the requested information. We also continue to find that the PRC-wide entity failed to cooperate. As a result, we continue to assign to the PRC-wide entity a dumping margin on the basis of adverse facts available (AFA) pursuant to section 776(b) of the Act.\7\ Furthermore, we continue to find that the highest petition margin of 68.27 percent is corroborated to the extent practicable within the meaning of section 776(c) of the Act for the reasons articulated in the Preliminary Determination.\8\ Therefore, for the final determination, we continue to assign this dumping margin (i.e., 68.27 percent) to the PRC-wide entity.
---------------------------------------------------------------------------
\7\ As stated in the Preliminary Determination, we did not conduct verification pursuant to section 782(i) of the Act because the only rate established in the case is based entirely on AFA.
\8\ See Preliminary Determination and accompanying Preliminary Decision Memorandum at 10-12.
---------------------------------------------------------------------------
Combination Rates
In the Initiation Notice,\9\ the Department stated that it would calculate combination rates for the respondents that are eligible for a separate rate in this investigation. Policy Bulletin 05.1 describes this practice.\10\ However, as stated in the Preliminary Determination, all parties subject to this investigation are found to be part of the PRC-wide entity, to which we do not assign a separate combination rate.\11\
---------------------------------------------------------------------------
\9\ See Certain Carbon and Alloy Steel Cut-to-Length Plate from Austria, Belgium, Brazil, France, the Federal Republic of Germany, Italy, Japan, the Republic of Korea, the People's Republic of China, South Africa, Taiwan, and the Republic of Turkey: Initiation of Less-Than-Fair-Value Investigations, 81 FR 27089, 27095 (May 5, 2016) (Initiation Notice).
\10\ See Enforcement and Compliance's Policy Bulletin No. 05.1, regarding, ``Separate-Rates Practice and Application of Combination Rates in Antidumping Investigations involving Non-Market Economy Countries'' (April 5, 2005) (Policy Bulletin 05.1), available on the Department's Web site at http://enforcement.trade.gov/policy/bull05-1.pdf.
\11\ Id.; see also Preliminary Determination, 81 FR at 79451; Calcium Hypochlorite from the People's Republic of China: Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination, 79 FR 43393, 43394 (July 25, 2014), unchanged in Calcium Hypochlorite from the People's Republic of China: Final Determination of Sales at Less Than Fair Value, 79 FR 74065 (December 15, 2014).
---------------------------------------------------------------------------
Final Determination
The Department determines that CTL plate from the PRC is being, or is likely to be, sold in the United States at LTFV, and that the following dumping margin exists:
------------------------------------------------------------------------
Dumping margin
Exporter (percent)
------------------------------------------------------------------------
PRC-Wide Entity......................................... 68.27
------------------------------------------------------------------------
Disclosure
As stated in the Preliminary Determination, because the Department established only one rate in this investigation based entirely on AFA in accordance with section 776 of the Act, there are no calculations to disclose. The calculations performed in connection with this final determination are not proprietary in nature and are described in the Preliminary Determination, the Petition and in the PRC AD Initiation Checklist.\12\
---------------------------------------------------------------------------
\12\ See Preliminary Determination, 81 FR at 79451-52; Petitions for the Imposition of Antidumping and Countervailing Duties: Certain Carbon and Alloy Steel Cut-To-Length Plate from Austria, Belgium, Brazil, France, the Federal Republic of Germany, Italy, Japan, the Republic of Korea, the People's Republic of China, South Africa, Taiwan, and the Republic of Turkey, dated April 8, 2016 (Petition), Volume IV at 24; Supplement to the Petition, dated April 18, 2016; see also Initiation Notice and accompanying Antidumping Duty Investigation Initiation Checklist: Certain Carbon and Alloy Steel Cut-to-Length Plate from the People's Republic of China (PRC AD Initiation Checklist), at pages 7-11; and Preliminary Decision Memorandum at 11-12.
---------------------------------------------------------------------------
Continuation of Suspension of Liquidation
In accordance with section 735(c)(1)(B) of the Act, we will direct U.S. Customs and Border Protection (CBP) to continue to suspend
Page 8512
liquidation of all entries of CTL plate from the PRC, as described in Appendix I of this notice, which are entered, or withdrawn from warehouse, for consumption on or after November 14, 2016, the date of publication in the Federal Register of the affirmative Preliminary Determination. Pursuant to section 735(c)(1) of the Act, we will instruct CBP to require a cash deposit equal to the margin indicated in the chart above.\13\ These suspension of liquidation instructions will remain in effect until further notice.
---------------------------------------------------------------------------
\13\ See Modification of Regulations Regarding the Practice of Accepting Bonds During the Provisional Measures Period in Antidumping and Countervailing Duty Investigations, 76 FR 61042 (October 3, 2011).
---------------------------------------------------------------------------
In a LTFV investigation with a companion countervailing duty (CVD) investigation, we normally adjust antidumping duty cash deposit rates by the amount of export subsidies, where appropriate. However, in this investigation, we made no adjustments to the PRC-wide entity's antidumping cash deposit rate of 68.27 percent because the Department made no findings in the companion CVD investigation that any of the subsidies in question are export subsidies.\14\
---------------------------------------------------------------------------
\14\ See Preliminary Decision Memorandum at 12-13 and Certain Carbon and Alloy Steel Cut-to-Length Plate from the People's Republic of China: Final Affirmative Countervailing Duty Determination (unpublished); see also Circular Welded Carbon-Quality Steel Pipe from Pakistan: Affirmative Preliminary Determination of Sales at Less Than Fair Value and Postponement of Final Determination and Extension of Provisional Measures, 81 FR 36867 (June 8, 2016) and accompanying Preliminary Decision Memorandum at page 13, unchanged in Circular Welded Carbon-Quality Steel Pipe from Pakistan: Final Affirmative Determination of Sales at Less Than Fair Value, 81 FR 75028 (October 28, 2016).
---------------------------------------------------------------------------
Further, pursuant to section 777A(f) of the Act, we normally adjust cash deposit rates for estimated domestic subsidy pass-through, where appropriate. However, in this case, we continue to determine that there is no record evidence demonstrating that a domestic subsidy pass-
through adjustment is warranted.\15\ Thus, the Department has not made an adjustment to the antidumping duty cash deposit rates under section 777A(f) of the Act.
---------------------------------------------------------------------------
\15\ See Preliminary Decision Memorandum at 12.
---------------------------------------------------------------------------
International Trade Commission Notification
In accordance with section 735(d) of the Act, we intend to notify the International Trade Commission (ITC) of the final affirmative determination of sales at LTFV. As the Department's final determination is affirmative, in accordance with section 735(b)(2) of the Act, the ITC will determine, within 45 days, whether the domestic industry in the United States is materially injured, or threatened with material injury, by reason of imports of CTL plate from the PRC, or sales (or the likelihood of sales) for importation, of CTL plate from the PRC. If the ITC determines that such injury does not exist, this proceeding will be terminated and all securities posted will be refunded or canceled. If the ITC determines that such injury does exist, the Department intends to issue an antidumping duty order directing CBP to assess, upon further instruction by the Department, antidumping duties on all imports of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the effective date of the suspension of liquidation.
Notification Regarding Administrative Protective Orders
This notice will serve as a reminder to the parties subject to administrative protective order (APO) of their responsibility concerning the disposition of propriety information disclosed under APO in accordance with 19 CFR 351.305. Timely written notification of return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation.
We intend to issue and publish this determination in accordance with sections 735(d) and 777(i)(1) of the Act.
Dated: January 17, 2017.
Ronald K. Lorentzen,
Acting Assistant Secretary for Enforcement and Compliance.
Appendix I--Scope of the Investigation
The products covered by this investigation are certain carbon and alloy steel hot-rolled or forged flat plate products not in coils, whether or not painted, varnished, or coated with plastics or other non-metallic substances (cut-to-length plate). Subject merchandise includes plate that is produced by being cut-to-length from coils or from other discrete length plate and plate that is rolled or forged into a discrete length. The products covered include (1) Universal mill plates (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm but not exceeding 1250 mm, and of a thickness of not less than 4 mm, which are not in coils and without patterns in relief), and (2) hot-
rolled or forged flat steel products of a thickness of 4.75 mm or more and of a width which exceeds 150 mm and measures at least twice the thickness, and which are not in coils, whether or not with patterns in relief. The covered products described above may be rectangular, square, circular or other shapes and include products of either rectangular or non-rectangular cross-section where such non-rectangular cross-section is achieved subsequent to the rolling process, i.e., products which have been ``worked after rolling'' (e.g., products which have been beveled or rounded at the edges).
For purposes of the width and thickness requirements referenced above, the following rules apply:
(1) Except where otherwise stated where the nominal and actual thickness or width measurements vary, a product from a given subject country is within the scope if application of either the nominal or actual measurement would place it within the scope based on the definitions set forth above unless the product is already covered by an order existing on that specific country (e.g., Notice of the Antidumping Duty Order: Certain Hot-Rolled Carbon Steel Flat Products From the People's Republic of China, 66 FR 59561 (November 29, 2001)); and
(2) where the width and thickness vary for a specific product (e.g., the thickness of certain products with non-rectangular cross-
section, the width of certain products with non-rectangular shape, etc.), the measurement at its greatest width or thickness applies.
Steel products included in the scope of this investigation are products in which: (1) Iron predominates, by weight, over each of the other contained elements; and (2) the carbon content is 2 percent or less by weight.
Subject merchandise includes cut-to-length plate that has been further processed in the subject country or a third country, including but not limited to pickling, oiling, levelling, annealing, tempering, temper rolling, skin passing, painting, varnishing, trimming, cutting, punching, beveling, and/or slitting, or any other processing that would not otherwise remove the merchandise from the scope of the investigation if performed in the country of manufacture of the cut-to-length plate.
All products that meet the written physical description, are within the scope of this investigation unless specifically excluded or covered by the scope of an existing order. The following products are outside of, and/or specifically excluded from, the scope of this investigation:
(1) Products clad, plated, or coated with metal, whether or not painted, varnished or coated with plastic or other non-metallic substances;
(2) military grade armor plate certified to one of the following specifications or to a specification that references and incorporates one of the following specifications:
MIL-A-12560,
MIL-DTL-12560H,
MIL-DTL-12560J,
MIL-DTL-12560K,
MIL-DTL-32332,
MIL-A-46100D,
MIL-DTL-46100-E,
MIL-46177C,
MIL-S-16216K Grade HY80,
MIL-S-16216K Grade HY100,
MIL-S-24645A HSLA-80;
MIL-S-24645A HSLA-100,
T9074-BD-GIB-010/0300 Grade HY80,
T9074-BD-GIB-010/0300 Grade HY100,
T9074-BD-GIB-010/0300 Grade HSLA80,
T9074-BD-GIB-010/0300 Grade HSLA100, and
Page 8513
T9074-BD-GIB-010/0300 Mod. Grade HSLA115,
except that any cut-to-length plate certified to one of the above specifications, or to a military grade armor specification that references and incorporates one of the above specifications, will not be excluded from the scope if it is also dual- or multiple-
certified to any other non-armor specification that otherwise would fall within the scope of this order;
(3) stainless steel plate, containing 10.5 percent or more of chromium by weight and not more than 1.2 percent of carbon by weight;
(4) CTL plate meeting the requirements of ASTM A-829, Grade E 4340 that are over 305 mm in actual thickness;
(5) Alloy forged and rolled CTL plate greater than or equal to 152.4 mm in actual thickness meeting each of the following requirements:
(a) Electric furnace melted, ladle refined & vacuum degassed and having a chemical composition (expressed in weight percentages):
Carbon 0.23-0.28,
Silicon 0.05-0.20,
Manganese 1.20-1.60,
Nickel not greater than 1.0,
Sulfur not greater than 0.007,
Phosphorus not greater than 0.020,
Chromium 1.0-2.5,
Molybdenum 0.35-0.80,
Boron 0.002-0.004,
Oxygen not greater than 20 ppm,
Hydrogen not greater than 2 ppm, and
Nitrogen not greater than 60 ppm;
(b) With a Brinell hardness measured in all parts of the product including mid thickness falling within one of the following ranges:
(i) 270-300 HBW,
(ii) 290-320 HBW, or
(iii) 320-350HBW;
(c) Having cleanliness in accordance with ASTM E45 method A (Thin and Heavy): A not exceeding 1.5, B not exceeding 1.0, C not exceeding 0.5, D not exceeding 1.5; and
(d) Conforming to ASTM A578-S9 ultrasonic testing requirements with acceptance criteria 2 mm flat bottom hole;
(6) Alloy forged and rolled steel CTL plate over 407 mm in actual thickness and meeting the following requirements:
(a) Made from Electric Arc Furnace melted, Ladle refined & vacuum degassed, alloy steel with the following chemical composition (expressed in weight percentages):
Carbon 0.23-0.28,
Silicon 0.05-0.15,
Manganese 1.20-1.50,
Nickel not greater than 0.4,
Sulfur not greater than 0.010,
Phosphorus not greater than 0.020,
Chromium 1.20-1.50,
Molybdenum 0.35-0.55,
Boron 0.002-0.004,
Oxygen not greater than 20 ppm,
Hydrogen not greater than 2 ppm, and
Nitrogen not greater than 60 ppm;
(b) Having cleanliness in accordance with ASTM E45 method A (Thin and Heavy): A not exceeding 1.5, B not exceeding 1.5, C not exceeding 1.0, D not exceeding 1.5;
(c) Having the following mechanical properties:
(i) With a Brinell hardness not more than 237 HBW measured in all parts of the product including mid thickness; and having a Yield Strength of 75ksi min and UTS 95ksi or more, Elongation of 18% or more and Reduction of area 35% or more; having charpy V at -75 degrees F in the longitudinal direction equal or greater than 15 ft. lbs (single value) and equal or greater than 20 ft. lbs (average of 3 specimens) and conforming to the requirements of NACE MR01-75; or
(ii) With a Brinell hardness not less than 240 HBW measured in all parts of the product including mid thickness; and having a Yield Strength of 90 ksi min and UTS 110 ksi or more, Elongation of 15% or more and Reduction of area 30% or more; having charpy V at -40 degrees F in the longitudinal direction equal or greater than 21 ft. lbs (single value) and equal or greater than 31 ft. lbs (average of 3 specimens);
(d) Conforming to ASTM A578-S9 ultrasonic testing requirements with acceptance criteria 3.2 mm flat bottom hole; and
(e) Conforming to magnetic particle inspection in accordance with AMS 2301;
(7) Alloy forged and rolled steel CTL plate over 407 mm in actual thickness and meeting the following requirements:
(a) Made from Electric Arc Furnace melted, ladle refined & vacuum degassed, alloy steel with the following chemical composition (expressed in weight percentages):
Carbon 0.25-0.30,
Silicon not greater than 0.25,
Manganese not greater than 0.50,
Nickel 3.0-3.5,
Sulfur not greater than 0.010,
Phosphorus not greater than 0.020,
Chromium 1.0-1.5,
Molybdenum 0.6-0.9,
Vanadium 0.08 to 0.12
Boron 0.002-0.004,
Oxygen not greater than 20 ppm,
Hydrogen not greater than 2 ppm, and
Nitrogen not greater than 60 ppm.
(b) Having cleanliness in accordance with ASTM E45 method A (Thin and Heavy): A not exceeding 1.0(t) and 0.5(h), B not exceeding 1.5(t) and 1.0(h), C not exceeding 1.0(t) and 0.5(h), and D not exceeding 1.5(t) and 1.0(h);
(c) Having the following mechanical properties: A Brinell hardness not less than 350 HBW measured in all parts of the product including mid thickness; and having a Yield Strength of 145ksi or more and UTS 160ksi or more, Elongation of 15% or more and Reduction of area 35% or more; having charpy V at -40 degrees F in the transverse direction equal or greater than 20 ft. lbs (single value) and equal or greater than 25 ft. lbs (average of 3 specimens);
(d) Conforming to ASTM A578-S9 ultrasonic testing requirements with acceptance criteria 3.2 mm flat bottom hole; and
(e) Conforming to magnetic particle inspection in accordance with AMS 2301.
Excluded from the scope of the antidumping duty investigation on cut-to-length plate from the People's Republic of China are any products covered by the existing antidumping duty order on certain cut-to-length carbon steel plate from the People's Republic of China. See Suspension Agreement on Certain Cut-to-Length Carbon Steel Plate From the People's Republic of China; Termination of Suspension Agreement and Notice of Antidumping Duty Order, 68 FR 60,081 (Dep't Commerce Oct. 21, 2003), as amended, Affirmative Final Determination of Circumvention of the Antidumping Duty Order on Certain Cut-to-Length Carbon Steel Plate From the People's Republic of China, 76 FR 50,996, 50,996-97 (Dep't of Commerce Aug. 17, 2011). On August 17, 2011, the U.S. Department of Commerce found that the order covered all imports of certain cut-to-length carbon steel plate products with 0.0008 percent or more boron, by weight, from China not meeting all of the following requirements: aluminum level of 0.02 percent or greater, by weight; a ratio of 3.4 to 1 or greater, by weight, of titanium to nitrogen; and a hardenability test (i.e., Jominy test) result indicating a boron factor of 1.8 or greater.
The products subject to the investigation are currently classified in the Harmonized Tariff Schedule of the United States (HTSUS) under item numbers: 7208.40.3030, 7208.40.3060, 7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 7225.40.1110, 7225.40.1180, 7225.40.3005, 7225.40.3050, 7226.20.0000, and 7226.91.5000.
The products subject to the investigation may also enter under the following HTSUS item numbers: 7208.40.6060, 7208.53.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.19.1500, 7211.19.2000, 7211.19.4500, 7211.19.6000, 7211.19.7590, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7214.10.0000, 7214.30.0010, 7214.30.0080, 7214.91.0015, 7214.91.0060, 7214.91.0090, 7225.11.0000, 7225.19.0000, 7225.40.5110, 7225.40.5130, 7225.40.5160, 7225.40.7000, 7225.99.0010, 7225.99.0090, 7226.11.1000, 7226.11.9060, 7226.19.1000, 7226.19.9000, 7226.91.0500, 7226.91.1530, 7226.91.1560, 7226.91.2530, 7226.91.2560, 7226.91.7000, 7226.91.8000, and 7226.99.0180.
The HTSUS subheadings above are provided for convenience and customs purposes only. The written description of the scope of the investigation is dispositive.
Appendix II--List of Topics Discussed in the Issues and Decision Memorandum
-
Summary
-
Background
-
Discussion of the Issues
Comment 1: Separate Rate Treatment of Tiangong
Comment 2: Separate Rate Treatment of Jiangyin Special
-
Recommendation
FR Doc. 2017-01710 Filed 1-25-17; 8:45 am
BILLING CODE 3510-DS-P
