Agency information collection activities: Proposed collection; comment request,

[Federal Register: September 2, 1999 (Volume 64, Number 170)]

[Notices]

[Page 48207-48208]

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

[DOCID:fr02se99-102]

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

[Docket No. ICR-99-14]

Servicing Multi-Piece and Single Piece Rim Wheels (Manufacturer's Certification Record); Extension of the Office of Management and Budget's (OMB) Approval of an Information Collection (Paperwork) Requirement

AGENCY: Occupational Safety and Health Administration (OSHA); Labor.

ACTION: Notice of an opportunity for public comment.

SUMMARY: OSHA solicits comments concerning the proposed extension of the information collection requirements contained in the standard on Servicing Multi-Piece and Single Piece Rim Wheels (29 CFR 1910.177(d)(3)(iv)).

Request for Comment

The Agency seeks comments on the following issues:

‹bullet› Whether the information collection requirements are necessary for the proper performance of the Agency's functions, including whether the information is useful;

‹bullet› The accuracy of the Agency's estimate of the burden (time and costs) of the information collection requirements, including the validity of the methodology and assumptions used;

‹bullet› The quality, utility, and clarity of the information collected; and

‹bullet› Ways to minimize the burden on employers who must comply; for example, by using automated, electronic, mechanical, and other technological information and transmission collection techniques.

DATES: Submit written comments on or before November 1, 1999.

ADDRESSES: Submit written comments to the Docket Office, Docket No. ICR-99-14, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-2625, 200 Constitution Avenue, NW, Washington, DC 20210; telephone: (202) 693-2350. Commenters may transmit written comments of 10 pages or less in length by facsimile to (202) 693-1648.

FOR FURTHER INFORMATION CONTACT: Theda Kenney, Directorate of Safety Standards Programs, Occupational Safety and Health Administration, U.S. Department of Labor, Room N-3605, 200 Constitution Avenue, NW, Washington, DC 20210; telephone: (202) 693-2222. A copy of the Agency's Information Collection Request (ICR) supporting the need for the information collection requirement (manufacturer's certification record) contained in the standard on Servicing Multi-Piece and Single Piece Rim Wheels (29 CFR 1910.177(d)(3)(iv)) is available for inspection and copying in the Docket Office, or mailed on request by telephoning Theda Kenney at (202) 693-2222 or Barbara Bielaski at (202) 693-2444. For electronic copies of the ICR, contact OSHA on the Internet at http://www.osha.gov/comp-links.html, and click on ``Information Collection Requests.''

SUPPLEMENTARY INFORMATION:

  1. Background

    The Department of Labor, as part of its continuing effort to reduce paperwork and respondent burden, conducts a preclearance consultation program to provide the general public and Federal agencies with an opportunity to comment on proposed and continuing information collection requirements in accordance with the Paperwork Reduction Act of 1995 (PRA-95) (44 U.S.C. 3506(c)(2)(A)). This program ensures that information is in the desired format, reporting burden (time and costs) is minimal, collection instruments are clearly understood, and OSHA's estimate of the information collection burden is correct.

    The Occupational Safety and Health Act of 1970 (the Act) authorizes information collection by employers as necessary or appropriate for enforcement of the Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents. (29 U.S.C. 657.) In this regard, the information collection requirement (the manufacturer's certification record) in the standard on Servicing Multi-Piece and Single Piece Rim Wheels (29 CFR 1910.177(d)(3)(iv)) ensures that employers protect employees from the hazards of a damaged restraining device in the event of a rim wheel separation or the sudden release of pressurized air.

  2. Proposed Actions

    OSHA proposes to retain its earlier estimate of six burden hours for the provision pertaining to the manufacturer's certification record in the standard on Servicing Multi-Piece and Single Piece Rim Wheels (29 CFR 1910.177(d)(3)(iv)).

    OSHA will summarize the comments submitted in response to this notice, and will include this summary in the request to OMB to extend the approval of the information collection requirement contained in the above standard.

    [[Page 48208]]

    Type of Review: Extension of currently approved information collection requirement.

    Agency: Occupational Safety and Health Administration.

    Title: Servicing Multi-Piece and Single Piece Rim Wheels, Manufacturer's Certification Record (29 CFR 1910.177(d)(3)(iv)).

    OMB Number: 1218-0219.

    Affected Public: Business or other for-profit; not-for-profit institutions; Federal government; state, local or tribal government.

    Number of Respondents: 80.

    Frequency: Annually.

    Average Time per Response: 5 minutes (0.08 hour).

    Estimated Total Burden Hours: 6.

  3. Authority and Signature

    Charles N. Jeffress, Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506), Secretary of Labor's Order No. 6-96 (62 FR 111), and 29 CFR part 1911.

    Signed at Washington, DC, this 27th day of August, 1999. Charles N. Jeffress, Assistant Secretary of Labor.

    [FR Doc. 99-22847Filed9-1-99; 8:45 am]

    BILLING CODE 4510-26-M

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT