Antidumping: Small diameter carbon and alloy seamless standard, line, and pressure pipe from Romania,
[Federal Register: March 22, 2006 (Volume 71, Number 55)]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
DEPARTMENT OF COMMERCE
International Trade Administration
Certain Small Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe from Romania: Final Results of Antidumping Duty Administrative Review
AGENCY: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: On January 10, 2006, the Department of Commerce published the preliminary results of the administrative review of the antidumping duty order on certain small diameter carbon and alloy seamless standard, line, and pressure pipe (seamless pipe) from Romania. The period of review is August 1, 2004, through July 31, 2005. We did not receive comments from interested parties, and we did not make any changes to the margin for the final results. The final margin for S.C. Silcotub S.A. is listed below in the section entitled ``Final Results of Review.''
DATE: March 22, 2006.
FOR FURTHER INFORMATION CONTACT: John Holman at (202) 482-3683 or Janis Kalnins at (202) 482-1392, AD/CVD Operations, Office 5, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230.
On January 10, 2006, the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty order on seamless pipe from Romania. See Certain Small Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe from Romania: Preliminary Results of Antidumping Duty Administrative Review, 71 FR 1509 (January 10, 2006) (Preliminary Results). We invited interested parties to comment on the Preliminary Results. We did not receive comments from interested parties, and we did not make any changes to the margin for the final results. The Department has conducted this administrative review in accordance with section 751 of the Tariff Act of 1930, as amended (the Act).
Scope of the Order
The products covered by the order are seamless carbon and alloy (other than stainless) steel standard, line, and pressure pipes and redraw hollows produced, or equivalent, to the ASTM A-53, ASTM A-106, ASTM A-333, ASTM A-334, ASTM A-335, ASTM A-589, ASTM A-795, and the API 5L specifications and meeting the physical parameters described below, regardless of application. The scope of the order also includes all products used in standard, line, or pressure pipe applications and meeting the physical parameters described below, regardless of specification. Specifically included within the scope of the order are seamless pipes and redraw hollows, less than or equal to 4.5 inches (114.3 mm) in outside diameter, regardless of wall-thickness, manufacturing process (hot finished or cold-drawn), end finish (plain end, beveled end, upset end, threaded, or threaded and coupled), or surface finish.
The seamless pipes subject to the order are currently classifiable under the subheadings 7304.10.10.20, 7304.10.50.20, 7304.31.30.00, 7304.31.60.50, 7304.39.00.16, 7304.39.00.20, 7304.39.00.24, 7304.39.00.28, 7304.39.00.32, 7304.51.50.05, 7304.51.50.60, 7304.59.60.00, 7304.59.80.10, 7304.59.80.15, 7304.59.80.20, and 7304.59.80.25 of the Harmonized Tariff Schedule of the United States (HTSUS).
Although the HTSUS subheadings are provided for convenience and U.S. Customs and Border Protection (CBP) purposes, our written description of the merchandise subject to the scope of this order is dispositive. For a further and more specific description of the scope of the order, please see Certain Small Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe from Romania: Preliminary Results of Antidumping Duty Administrative Review and Preliminary Determination Not to Revoke in Part, 70 FR 24520 (May 10, 2005).
For these final results, we continue to find that S.C. Silcotub S.A. did not act to the best of its ability by not submitting a response to our antidumping duty questionnaire, thus withholding information necessary to calculate an accurate dumping margin and information which we requested. Accordingly, we continue to find that the use of adverse facts available is warranted under section 776 of the Act. For a detailed discussion of our application, selection, and corroboration of the rate we selected as adverse facts available, see Preliminary Results, 71 FR at 1510.
Final Results of Review
As a result of our review, we determine that a weighted-average dumping margin of 15.15 percent exists for S.C. Silcotub S.A. for the period August 1, 2004, through July 31, 2005.
Duty Assessment and Cash-Deposit Requirements
The Department will determine, and CBP shall assess, antidumping duties on all appropriate entries. Because we are applying adverse facts available to all exports of subject merchandise produced or exported by S.C. Silcotub S.A., we will instruct CBP to assess the final percentage margin against the entered customs values on all applicable entries during the period of review. The Department will issue appropriate assessment instructions directly to CBP within 15 days of publication of these final results of review.
The following deposit requirements will be effective upon publication of these final results of this administrative review for all shipments of seamless pipe from Romania entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results, as provided by section 751(a)(2)(C) of the Act: (1) The cash-deposit rate for S.C. Silcotub S.A. will be 15.15 percent; (2) for merchandise exported by producers or exporters that were previously reviewed or investigated, the cash deposit will continue to be the most recent rate published in the final determination or final results for which the producer or exporter received an individual rate; (3) if the exporter is not a firm covered in this review, a prior review, or the original less-than-fair-value investigation but the manufacturer is, the cash-deposit rate will be the rate established for the most recent period for the manufacturer of the subject merchandise; and (4) if neither the exporter nor the manufacturer is a firm covered in this or any previous review, the cash-deposit rate shall be 13.06 percent, the all-others rate established in the 2002-03 administrative review. See Notice of Final Results of Antidumping Duty Administrative Review and Final Determination Not To Revoke Order in Part: Certain Small Diameter Carbon and Alloy Seamless Standard, Line, and Pressure Pipe From Romania, 70 FR 7237 (February 11, 2005). These cash-deposit requirements
shall remain in effect until publication of the final results of the next administrative review.
Notification of Interested Parties
This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during the review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.
This notice also serves as a reminder to parties subject to administrative protective orders (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO as explained in the administrative protective order itself. Timely written notification of the return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation.
These final results of administrative review and notice are issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act.
Dated: March 16, 2006. David M. Spooner, Assistant Secretaryfor Import Administration.
[FR Doc. E6-4150 Filed 3-21-06; 8:45 am]
BILLING CODE 3510-DS-S