Airworthiness Directives; Dassault Aviation Airplanes

Federal Register, Volume 79 Issue 85 (Friday, May 2, 2014)

Federal Register Volume 79, Number 85 (Friday, May 2, 2014)

Proposed Rules

Pages 25033-25035

From the Federal Register Online via the Government Printing Office www.gpo.gov

FR Doc No: 2014-10059

=======================================================================

-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

Docket No. FAA-2014-0258; Directorate Identifier 2013-NM-065-AD

RIN 2120-AA64

Airworthiness Directives; Dassault Aviation Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: We propose to adopt a new airworthiness directive (AD) for certain DASSAULT AVIATION Model FALCON 900EX airplanes. This proposed AD was prompted by our determination to introduce a corrosion prevention control program, among other changes, to the maintenance requirements and airworthiness limitations. This proposed AD would require revising the maintenance or inspection program, as applicable, to include the maintenance tasks and airworthiness limitations specified in the Airworthiness Limitations section of the airplane maintenance manual. We are proposing this AD to prevent reduced structural integrity and reduced controllability of the airplane.

DATES: We must receive comments on this proposed AD by June 16, 2014.

ADDRESSES: You may send comments by any of the following methods:

Federal eRulemaking Portal: Go to http://www.regulations.gov. Follow the instructions for submitting comments.

Fax: (202) 493-2251.

Mail: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590.

Hand Delivery: U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays.

For service information identified in this proposed AD, contact Dassault Falcon Jet, P.O. Box 2000, South Hackensack, NJ 07606; telephone 201-440-6700; Internet http://www.dassaultfalcon.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221.

Examining the AD Docket

You may examine the AD docket on the Internet at http://www.regulations.gov by searching for and locating Docket No. FAA-2014-

0258; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this proposed AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Operations office (telephone (800) 647-5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt.

FOR FURTHER INFORMATION CONTACT: Tom Rodriguez, Aerospace Engineer, International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton, WA 98057-3356; telephone (425) 227-1137; fax (425) 227-1149.

SUPPLEMENTARY INFORMATION:

Comments Invited

We invite you to send any written relevant data, views, or arguments about this proposed AD. Send your comments to an address listed under the ADDRESSES section. Include ``Docket No. FAA-2014-0258; Directorate Identifier 2013-NM-065-AD'' at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this proposed AD. We will consider all comments received by the closing date and may amend this proposed AD based on those comments.

We will post all comments we receive, without change, to http://www.regulations.gov, including any personal information you provide. We will also post a report summarizing each substantive verbal contact we receive about this proposed AD.

Discussion

The European Aviation Safety Agency (EASA), which is the Technical Agent

Page 25034

for the Member States of the European Community, has issued EASA Airworthiness Directive 2013-0051, dated March 4, 2013 (referred to after this as the Mandatory Continuing Airworthiness Information, or ``the MCAI''), to correct an unsafe condition for the specified products. The MCAI states:

The airworthiness limitations and maintenance requirements for the Falcon 900EX type design are included in Dassault Aviation Aircraft Maintenance Manual (AMM) chapter 5-40 and are approved by the European Aviation Safety Agency (EASA).

EASA issued AD 2008-0221 http://ad.easa.europa.eu/blob/easa_ad_2008_0221_Corrected.pdf/AD_2008-0221_1 to require accomplishment of the maintenance tasks, and implementation of the airworthiness limitations, as specified in Dassault Aviation F900EX AMM chapter 5-40 referenced DGT 113874 at revision 8.

Since that EASA AD was issued, Dassault Aviation issued revision 12 of F900EX AMM chapter 5-40 which contains new or more restrictive maintenance requirements and/or airworthiness limitations and introduces, among others, the following changes:

--Tasks renumbering,

--Introduction of a Corrosion Prevention Control Program (CPCP),

--Upgrade of screwjack of flap actuators from the older to the latest -3 version;

--Revised Time Between Overhaul for screwjack of flap actuators -3 version;

--Revised interval for checking the screw/nut play on screwjack of flap actuators -3 version;

--Removal of service life limit for screwjack of flap actuators;

--Test of flap asymmetry protection system. Compliance with this test is required by a certain French AD * * *, which corresponds to FAA AD 2002-23-20, Amendment 39-12964 (67 FR 71098, November 29, 2002), but F900EX AMM chapter 5-40 at revision 12 introduces an extended inspection interval;

--Inspection procedures of fuselage and wings;

--Check of overpressure tightness on pressurization control regulating valves. Compliance with this check is required by EASA AD 2008-0072 http://ad.easa.europa.eu/blob/easa_ad_2008_0072.pdf/AD_2008-0072_1, which corresponds to FAA AD 2010-26-05, Amendment 39-16544 (75 FR 79952, December 21, 2010), but F900EX AMM chapter 5-40 at revision 12 introduces an extended inspection interval;

--Check of overpressure relief valve vacuum supply lines. The maintenance tasks and airworthiness limitations, as specified in the F900EX AMM chapter 5-40, have been identified as mandatory actions for continued airworthiness of the F900EX type design. Failure to comply with AMM chapter 5-40 at revision 12 may result in an unsafe condition e.g., reduced structural integrity and reduced controllability of the airplane.

For the reasons described above, this EASA AD requires the implementation of the maintenance tasks and airworthiness limitations, as specified in the Dassault Aviation F900EX AMM chapter 5-40 DGT 113874 at revision 12.

You may examine the MCAI in the AD docket on the Internet at http://www.regulations.gov by searching for and locating it in Docket No. FAA-2014-0258.

Relevant Service Information

Dassault Aviation has issued Chapter 5-40, Airworthiness Limitations, DGT 113874, Revision 12, dated September 2012, of the Falcon 900EX Maintenance Manual. The actions described in this service information are intended to correct the unsafe condition identified in the MCAI.

FAA's Determination and Requirements of This Proposed AD

This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to our bilateral agreement with the State of Design Authority, we have been notified of the unsafe condition described in the MCAI and service information referenced above. We are proposing this AD because we evaluated all pertinent information and determined an unsafe condition exists and is likely to exist or develop on other products of the same type design.

This AD requires revisions to certain operator maintenance documents to include new actions (e.g., inspections). Compliance with these inspections is required by 14 CFR 91.403(c). For airplanes that have been previously modified, altered, or repaired in the areas addressed by these actions, the operator may not be able to accomplish the actions described in the revisions. In this situation, to comply with 14 CFR 91.403(c), the operator must request approval for an alternative method of compliance according to paragraph (j)(1) of this AD. The request should include a description of changes to the required inspections that will ensure the continued operational safety of the airplane.

Costs of Compliance

We estimate that this proposed AD affects 72 airplanes of U.S. registry.

We estimate the following costs to comply with this proposed AD:

Estimated Costs

----------------------------------------------------------------------------------------------------------------

Cost per Cost on U.S.

Action Labor cost Parts cost product operators

----------------------------------------------------------------------------------------------------------------

Maintenance Program Revision............. 1 work-hour x $85 per hour $0 $85 $6,120

= $85.

----------------------------------------------------------------------------------------------------------------

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. ``Subtitle VII: Aviation Programs,'' describes in more detail the scope of the Agency's authority.

We are issuing this rulemaking under the authority described in ``Subtitle VII, Part A, Subpart III, Section 44701: General requirements.'' Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

We determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify this proposed regulation:

  1. Is not a ``significant regulatory action'' under Executive Order 12866;

  2. Is not a ``significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979);

  3. Will not affect intrastate aviation in Alaska; and

  4. Will not have a significant economic impact, positive or negative, on a substantial number of small entities

    Page 25035

    under the criteria of the Regulatory Flexibility Act.

    List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.

    The Proposed Amendment

    Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

    PART 39--AIRWORTHINESS DIRECTIVES

    0

  5. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.

    Sec. 39.13 Amended

    0

  6. The FAA amends Sec. 39.13 by adding the following new AD:

    Dassault Aviation: Docket No. FAA-2014-0258; Directorate Identifier 2013-NM-065-AD.

    (a) Comments Due Date

    We must receive comments by June 16, 2014.

    (b) Affected ADs

    This AD affects AD 2002-23-20, Amendment 39-12964 (67 FR 71098, November 29, 2002), and AD 2010-26-05, Amendment 39-16544 (75 FR 79952, December 21, 2010).

    (c) Applicability

    This AD applies to Dassault Aviation Model FALCON 900EX airplanes, certificated in any category, serial number 1 through 96 inclusive, and serial number 98 through 119 inclusive.

    (d) Subject

    Air Transport Association (ATA) of America Code 05, Time Limits/

    Maintenance Checks.

    (e) Reason

    This AD was prompted by our determination to introduce a corrosion prevention control program, among other changes, to the maintenance requirements and airworthiness limitations. We are issuing this AD to prevent reduced structural integrity and reduced controllability of the airplane.

    (f) Compliance

    Comply with this AD within the compliance times specified, unless already done.

    (g) Revision of Maintenance Program

    Within 30 days after the effective date of this AD, revise the maintenance or inspection program, as applicable, to incorporate the information specified in Chapter 5-40, Airworthiness Limitations, DGT 113874, Revision 12, dated September 2012, of the Falcon 900EX Maintenance Manual. The initial compliance time for accomplishing the actions specified in Chapter 5-40, Airworthiness Limitations, DGT 113874, Revision 12, dated September 2012, of the Falcon 900EX Maintenance Manual, is within the applicable times specified in that maintenance manual, or 30 days after the effective date of this AD, whichever occurs later, except as provided by paragraphs (g)(1) through (g)(4) of this AD.

    (1) The term ``LDG'' in the ``First Inspection'' column of any table in the service information means total airplane landings.

    (2) The term ``FH'' in the ``First Inspection'' column of any table in the service information means total flight hours.

    (3) The term ``FC'' in the ``First Inspection'' column of any table in the service information means total flight cycles.

    (4) The term ``M'' in the ``First Inspection'' column of any table in the service information means months.

    (h) Terminating Action

    Accomplishing paragraph (g) of this AD terminates the requirements of AD 2002-23-20, Amendment 39-12964 (67 FR 71098, November 29, 2002); and paragraph (g)(1) of AD 2010-26-05, Amendment 39-16544 (75 FR 79952, December 21, 2010); for Dassault Aviation Model FALCON 900EX airplanes, serial number 1 to 96 inclusive, and serial number 98 to 119 inclusive.

    (i) No Alternative Actions and Intervals

    After accomplishing the revision required by paragraph (g) of this AD, no alternative actions (e.g., inspections) or intervals may be used unless the actions or intervals are approved as an alternative method of compliance (AMOC) in accordance with the procedures specified in paragraph (j)(1) of this AD.

    (j) Other FAA AD Provisions

    The following provisions also apply to this AD:

    (1) Alternative Methods of Compliance (AMOCs): The Manager, International Branch, ANM-116, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the International Branch, send it to ATTN: Tom Rodriguez, Aerospace Engineer, International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue SW., Renton, WA 98057-3356; telephone (425) 227-

    1137; fax (425) 227-1149. Information may be emailed to: 9-ANM-116-AMOC-REQUESTS@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/

    certificate holding district office. The AMOC approval letter must specifically reference this AD.

    (2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer, use these actions if they are FAA-approved. Corrective actions are considered FAA-approved if they were approved by the State of Design Authority (or its delegated agent, or the DAH with a State of Design Authority's design organization approval). You are required to ensure the product is airworthy before it is returned to service.

    (k) Related Information

    (1) Refer to Mandatory Continuing Airworthiness Information (MCAI) EASA Airworthiness Directive 2013-0051, dated March 4, 2013, for related information. This MCAI may be found in the AD docket on the Internet at http://www.regulations.gov by searching for and locating it in Docket No. FAA-2014-0258.

    (2) For service information identified in this AD, contact Dassault Falcon Jet, P.O. Box 2000, South Hackensack, NJ 07606; telephone 201-440-6700; Internet http://www.dassaultfalcon.com. You may view this service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425-227-1221.

    Issued in Renton, Washington, on April 25, 2014.

    Jeffrey E. Duven,

    Manager, Transport Airplane Directorate, Aircraft Certification Service.

    FR Doc. 2014-10059 Filed 5-1-14; 8:45 am

    BILLING CODE 4910-13-P

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT