Exemptions from the Requirement of a Tolerance:

Federal Register: February 11, 2011 (Volume 76, Number 29)

Rules and Regulations

Page 7703-7707

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

DOCID:fr11fe11-5

ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 180

EPA-HQ-OPP-2010-0838; FRL-8863-9

1,4-Benzenedicarboxylic Acid, Dimethyl Ester, Polymer With 1,4-

Butanediol, Adipic Acid, and Hexamethylene Diisocyanate; Exemption From the Requirement of a Tolerance

AGENCY: Environmental Protection Agency (EPA).

ACTION: Final rule.

SUMMARY: This regulation establishes an exemption from the requirement of a tolerance for residues of 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate (CAS Reg. No. 55231-08-8), minimum number average molecular weight (in amu) 30,000, when used as an inert ingredient

(component of controlled release agent) in honeybee hive miticide formulations under regulations for inert ingredients used pre-harvest

(growing crops only). NOP Apiary Products USA, Inc., submitted a petition to EPA under the Federal Food, Drug, and Cosmetic Act (FFDCA), requesting establishment of an exemption from the requirement of a tolerance. This regulation eliminates the need to establish a maximum permissible level for residues of 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate.

DATES: This regulation is effective February 11, 2011. Objections and requests for hearings must be received on or before April 12, 2011, and must be filed in accordance with the instructions provided in 40 CFR part 178 (see also Unit I.C. of the SUPPLEMENTARY INFORMATION).

ADDRESSES: EPA has established a docket for this action under docket identification (ID) number EPA-HQ-OPP-2010-0838. All documents in the docket are listed in the docket index available at http:// www.regulations.gov. Although listed in the index, some information is not publicly available, e.g., Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, is not placed on the

Internet and will be publicly available only in hard copy form.

Publicly available docket materials are available in the electronic docket at http://www.regulations.gov, or, if only available in hard copy, at the OPP Regulatory Public Docket in Rm. S-4400, One Potomac

Yard (South Bldg.), 2777 S. Crystal Dr., Arlington, VA. The Docket

Facility is open from 8:30 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The Docket Facility telephone number is (703) 305-5805.

FOR FURTHER INFORMATION CONTACT: Kerry Leifer, Registration Division

(7505P), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (703) 308-8811; e-mail address: leifer.kerry@epa.gov.

SUPPLEMENTARY INFORMATION:

  1. General Information

    1. Does this action apply to me?

      You may be potentially affected by this action if you are an agricultural producer, food manufacturer, or pesticide manufacturer.

      Potentially affected entities may include, but are not limited to:

      Crop production (NAICS code 111).

      Animal production (NAICS code 112).

      Food manufacturing (NAICS code 311).

      Pesticide manufacturing (NAICS code 32532).

      This listing is not intended to be exhaustive, but rather provides a guide for readers regarding entities likely to be affected by this action. Other types of entities not listed in this unit could also be affected. The North American Industrial Classification System (NAICS) codes have been provided to assist you and others in determining whether this action might apply to certain entities. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION

      CONTACT.

    2. How can I get electronic access to other related information?

      You may access a frequently updated electronic version of 40 CFR part 180 through the Government Printing Office's e-CFR site at http:// www.gpoaccess.gov/ecfr.

      Page 7704

    3. How can I file an objection or hearing request?

      Under FFDCA section 408(g), 21 U.S.C. 346a, any person may file an objection to any aspect of this regulation and may also request a hearing on those objections. You must file your objection or request a hearing on this regulation in accordance with the instructions provided in 40 CFR part 178. To ensure proper receipt by EPA, you must identify docket ID number EPA-HQ-OPP-2010-0838 in the subject line on the first page of your submission. All objections and requests for a hearing must be in writing, and must be received by the Hearing Clerk on or before

      April 12, 2011. Addresses for mail and hand delivery of objections and hearing requests are provided in 40 CFR 178.25(b).

      In addition to filing an objection or hearing request with the

      Hearing Clerk as described in 40 CFR part 178, please submit a copy of the filing that does not contain any CBI for inclusion in the public docket. Information not marked confidential pursuant to 40 CFR part 2 may be disclosed publicly by EPA without prior notice. Submit a copy of your non-CBI objection or hearing request, identified by docket ID number EPA-HQ-OPP-2010-0838, by one of the following methods:

      Federal eRulemaking Portal: http://www.regulations.gov.

      Follow the on-line instructions for submitting comments.

      Mail: Office of Pesticide Programs (OPP) Regulatory Public

      Docket (7502P), Environmental Protection Agency, 1200 Pennsylvania

      Ave., NW., Washington, DC 20460-0001.

      Delivery: OPP Regulatory Public Docket (7502P),

      Environmental Protection Agency, Rm. S-4400, One Potomac Yard (South

      Bldg.), 2777 S. Crystal Dr., Arlington, VA. Deliveries are only accepted during the Docket Facility's normal hours of operation (8:30 a.m. to 4 p.m., Monday through Friday, excluding legal holidays).

      Special arrangements should be made for deliveries of boxed information. The Docket Facility telephone number is (703) 305-5805.

  2. Petition for Exemption

    In the Federal Register of October 22, 2010 (75 FR 65321) (FRL- 8851-1), EPA issued a notice pursuant to section 408 of FFDCA, 21

    U.S.C. 346a, announcing the filing of a pesticide petition (PP 0E7780) by NOD Apiary Products USA Inc., 8345 NW. 66th Street 8418,

    Miami, FL 33166. The petition requested that 40 CFR 180.920 be amended by establishing an exemption from the requirement of a tolerance for residues of 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate (CAS Reg.

    No. 55231-08-8) when used as an inert ingredient (component of controlled release agent) in miticide formulations applied to honeybee hives. That notice referenced a summary of the petition prepared by NOD

    Apiary Products USA Inc., the petitioner, which is available in the docket, http://www.regulations.gov. There were no comments received in response to the notice of filing.

  3. Inert Ingredient Definition

    Inert ingredients are all ingredients that are not active ingredients as defined in 40 CFR 153.125 and include, but are not limited to, the following types of ingredients (except when they have a pesticidal efficacy of their own): Solvents such as alcohols and hydrocarbons; surfactants such as polyoxyethylene polymers and fatty acids; carriers such as clay and diatomaceous earth; thickeners such as carrageenan and modified cellulose; wetting, spreading, and dispersing agents; propellants in aerosol dispensers; microencapsulating agents; and emulsifiers. The term ``inert'' is not intended to imply nontoxicity; the ingredient may or may not be chemically active.

    Generally, EPA has exempted inert ingredients from the requirement of a tolerance based on the low toxicity of the individual inert ingredients.

  4. Aggregate Risk Assessment and Determination of Safety

    Section 408(c)(2)(A)(i) of FFDCA allows EPA to establish an exemption from the requirement for a tolerance (the legal limit for a pesticide chemical residue in or on a food) only if EPA determines that the tolerance is ``safe.'' Section 408(b)(2)(A)(ii) of FFDCA defines

    ``safe'' to mean that ``there is a reasonable certainty that no harm will result from aggregate exposure to the pesticide chemical residue, including all anticipated dietary exposures and all other exposures for which there is reliable information.'' This includes exposure through drinking water and in residential settings, but does not include occupational exposure. Section 408(b)(2)(C) of FFDCA requires EPA to give special consideration to exposure of infants and children to the pesticide chemical residue in establishing a tolerance and to ``ensure that there is a reasonable certainty that no harm will result to infants and children from aggregate exposure to the pesticide chemical residue. * * *''

    EPA establishes exemptions from the requirement of a tolerance only in those cases where it can be clearly demonstrated that the risks from aggregate exposure to pesticide chemical residues under reasonably foreseeable circumstances will pose no appreciable risks to human health. In order to determine the risks from aggregate exposure to pesticide inert ingredients, the Agency considers the toxicity of the inert in conjunction with possible exposure to residues of the inert ingredient through food, drinking water, and through other exposures that occur as a result of pesticide use in residential settings. If EPA is able to determine that a finite tolerance is not necessary to ensure that there is a reasonable certainty that no harm will result from aggregate exposure to the inert ingredient, an exemption from the requirement of a tolerance may be established.

    Consistent with section 408(c)(2)(A) of FFDCA, and the factors specified in FFDCA section 408(c)(2)(B), EPA has reviewed the available scientific data and other relevant information in support of this action. EPA has sufficient data to assess the hazards of and to make a determination on aggregate exposure for 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate including exposure resulting from the exemption established by this action. EPA's assessment of exposures and risks associated with 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate follows.

    1. Toxicological Profile 1,4-Benzenedicarboxylic acid, dimethyl ester, polymer with 1,4- butanediol, adipic acid, and hexamethylene diisocyanate is a polyester- type polymer. The Agency has established a set of criteria to identify categories of polymers expected to present minimal or no risk to human health or the environment. The definition of a polymer is given in 40

      CFR 723.250(b) and the exclusion criteria for identifying these low- risk polymers are described in 40 CFR 723.250(d). 1,4-

      Benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate conforms to the definition of a polymer given in 40 CFR 723.250(b) and meets all of the following criteria, with the exception of the ``polymers which degrade, decompose or depolymerize'' criterion (specified in 40 CFR 723.250(e) below),

      Page 7705

      that are used to identify low-risk polymers. 1. The polymer is not a cationic polymer nor is it reasonably anticipated to become a cationic polymer in a natural aquatic environment. 2. The polymer does contain as an integral part of its composition the atomic elements carbon, hydrogen, and oxygen. 3. The polymer does not contain as an integral part of its composition, except as impurities, any element other than those listed in 40 CFR 723.250(d)(2)(ii). 4. The polymer is neither designed nor can it be reasonably anticipated to substantially degrade, decompose, or depolymerize. 5. The polymer is manufactured or imported from monomers and/or reactants that are already included on the TSCA Chemical Substance

      Inventory or manufactured under an applicable TSCA section 5 exemption. 6. The polymer is not a water absorbing polymer with a number average molecular weight (MW) greater than or equal to 10,000 daltons.

      Additionally, in order to meet the low risk polymer criteria, the polymer also meets as required the exemption criteria specified in 40

      CFR 723.250(e)(3) regarding polyester polymers made solely from specified reactants. 1,4-Benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate does undergo biodegradation in the environment and thus does not meet criterion number 4. listed in this unit; however, the

      Agency believes that this biodegradation in the environment is not a safety concern for humans because information provided by the petitioner as well as information contained in the environmental assessment that was part of the Food and Drug Administration Food

      Contact Notification (FDA FCN) indicates that the polymer would ultimately biodegrade into carbon dioxide and water and not be a concern to humans or the environment. This determination is further supported by biodegradation and ecotoxicity testing of a representative material in which the substance was determined to be readily biodegradable and nontoxic to earthworms. Due to its large size

      (minimum number average molecular weight 30,000 amu) and the general conformance to the criteria for identifying low risk polymers under 40

      CFR 723.250, 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate would not be expected to be absorbed through the intact gastrointestinal tract nor be anticipated to penetrate intact human skin. Inhalation exposure is not expected due to the nonvolatility of (component of controlled release agent) in honeybee hive miticide formulations. Because of its inability to enter systemic circulation when used as an inert ingredient in pesticide formulations 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate is essentially nontoxic. 1,4-

      Benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate has also been accepted by the FDA as being safe for use as a food contact substance to be used with all food types as a single-use film or coating under section 409(h)(2) of the FFDCA (Effective Food Contact Notification (FCN) No. 916). Based on the assessment in this unit, the Agency has concluded that a standard battery of toxicological studies are not necessary.

    2. Toxicological Points of Departure/Levels of Concern

      Due to the low potential hazard and lack of an identified hazard endpoint for 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate, the Agency has determined that a quantitative risk assessment using safety factors applied to a point of departure protective of an identified hazard endpoint is not appropriate.

    3. Exposure Assessment 1. Dietary exposure from food and feed uses and drinking water. In evaluating dietary exposure to 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate, EPA considered exposure under the proposed exemption from the requirement of a tolerance. The primary route of dietary exposure to 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4- butanediol, adipic acid, and hexamethylene diisocyanate from its use as an inert ingredient in pesticide products would be through consumption of honey. Use of 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate in miticide products applied to treat honeybee hives may possibly also result in exposure through drinking water (from runoff). Dietary exposure to 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate may also result from its use as a food contact substance. Because no hazards associated with dietary exposure were identified for 1,4- benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate, a quantitative dietary exposure assessment for 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate was not conducted. 2. From non-dietary exposure. The term ``residential exposure'' is used in this document to refer to non-occupational, non-dietary exposure (e.g., textiles (clothing and diapers), carpets, swimming pools, and hard surface disinfection on walls, floors, tables). Since there are no residential uses of pesticide products containing 1,4- benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate as an inert ingredient, residential exposures are not expected and a residential exposure assessment was not conducted. 3. Cumulative effects from substances with a common mechanism of toxicity. Section 408(b)(2)(D)(v) of FFDCA requires that, when considering whether to establish, modify, or revoke a tolerance, the

      Agency consider ``available information'' concerning the cumulative effects of a particular pesticide's residues and ``other substances that have a common mechanism of toxicity.''

      EPA has not found 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate to share a common mechanism of toxicity with any other substances, and 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate does not appear to produce a toxic metabolite produced by other substances.

      For the purposes of this tolerance action, therefore, EPA has assumed that 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4- butanediol, adipic acid, and hexamethylene diisocyanate does not have a common mechanism of toxicity with other substances. For information regarding EPA's efforts to determine which chemicals have a common mechanism of toxicity and to evaluate the cumulative effects of such chemicals, see EPA's Web site at http://www.epa.gov/pesticides/ cumulative.

      Page 7706

    4. Safety Factor for Infants and Children

      Due to the large molecular weight of 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate it is unlikely that it will enter systemic circulation from either the gastrointestinal tract or intact human skin. As a result, it is unlikely to elicit a toxic response in infants and children when used as an inert ingredient in pesticide products; therefore EPA did not use a safety factor analysis for assessing risk.

      For similar reasons, the additional safety factor for the protection of infants and children is not necessary.

    5. Aggregate Risks and Determination of Safety

      As indicated in this unit, 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate would be incapable of entering systemic circulation and therefore, unable to elicit a toxic response in humans. Taking into consideration all available information on 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate, EPA has determined that there is a reasonable certainty that no harm to any population subgroup, including infants and children, will result from aggregate exposure to 1,4- benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate under reasonable foreseeable circumstances. Therefore, the establishment of an exemption from tolerance under 40 CFR 180.920 for residues of 1,4- benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate, minimum number average molecular weight (in amu) 30,000 when used as an inert ingredient

      (component of controlled release agent) in honeybee hive miticide formulations is safe under FFDCA section 408.

  5. Other Considerations

    1. Analytical Enforcement Methodology

      An analytical method is not required for enforcement purposes since the Agency is establishing an exemption from the requirement of a tolerance without any numerical limitation.

    2. International Residue Limits

      In making its tolerance decisions, EPA seeks to harmonize U.S. tolerances with international standards whenever possible, consistent with U.S. food safety standards and agricultural practices. EPA considers the international maximum residue limits (MRLs) established by the Codex Alimentarius Commission (Codex), as required by FFDCA section 408(b)(4). The Codex Alimentarius is a joint U.N. Food and

      Agriculture Organization/World Health Organization food standards program, and it is recognized as an international food safety standards-setting organization in trade agreements to which the United

      States is a party. EPA may establish a tolerance that is different from a Codex MRL; however, FFDCA section 408(b)(4) requires that EPA explain the reasons for departing from the Codex level.

      The Codex has not established a MRL for 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate.

  6. Conclusions

    Therefore, an exemption from the requirement of a tolerance is established under 40 CFR 180.920 for 1,4-benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, and hexamethylene diisocyanate (CAS Reg. No. 55231-08-8), minimum number average molecular weight (in amu) 30,000, when used as an inert ingredient (component of controlled release agent) in honeybee hive miticide formulations.

  7. Statutory and Executive Order Reviews

    This final rule establishes a tolerance under section 408(d) of

    FFDCA in response to a petition submitted to the Agency. The Office of

    Management and Budget (OMB) has exempted these types of actions from review under Executive Order 12866, entitled Regulatory Planning and

    Review (58 FR 51735, October 4, 1993). Because this final rule has been exempted from review under Executive Order 12866, this final rule is not subject to Executive Order 13211, entitled Actions Concerning

    Regulations That Significantly Affect Energy Supply, Distribution, or

    Use (66 FR 28355, May 22, 2001) or Executive Order 13045, entitled

    Protection of Children from Environmental Health Risks and Safety Risks

    (62 FR 19885, April 23, 1997). This final rule does not contain any information collections subject to OMB approval under the Paperwork

    Reduction Act (PRA), 44 U.S.C. 3501 et seq., nor does it require any special considerations under Executive Order 12898, entitled Federal

    Actions to Address Environmental Justice in Minority Populations and

    Low-Income Populations (59 FR 7629, February 16, 1994).

    Since tolerances and exemptions that are established on the basis of a petition under section 408(d) of FFDCA, such as the tolerance in this final rule, do not require the issuance of a proposed rule, the requirements of the Regulatory Flexibility Act (RFA) (5 U.S.C. 601 et seq.) do not apply.

    This final rule directly regulates growers, food processors, food handlers, and food retailers, not States or Tribes, nor does this action alter the relationships or distribution of power and responsibilities established by Congress in the preemption provisions of section 408(n)(4) of FFDCA. As such, the Agency has determined that this action will not have a substantial direct effect on States or

    Tribal governments, on the relationship between the national government and the States or Tribal governments, or on the distribution of power and responsibilities among the various levels of government or between the Federal Government and Indian Tribes. Thus, the Agency has determined that Executive Order 13132, entitled Federalism (64 FR 43255, August 10, 1999) and Executive Order 13175, entitled

    Consultation and Coordination with Indian Tribal Governments (65 FR 67249, November 9, 2000) do not apply to this final rule. In addition, this final rule does not impose any enforceable duty or contain any unfunded mandate as described under Title II of the Unfunded Mandates

    Reform Act of 1995 (UMRA) (Pub. L. 104-4).

    This action does not involve any technical standards that would require Agency consideration of voluntary consensus standards pursuant to section 12(d) of the National Technology Transfer and Advancement

    Act of 1995 (NTTAA), Public Law 104-113, section 12(d) (15 U.S.C. 272 note).

  8. Congressional Review Act

    The Congressional Review Act, 5 U.S.C. 801 et seq., generally provides that before a rule may take effect, the agency promulgating the rule must submit a rule report to each House of the Congress and to the Comptroller General of the United States. EPA will submit a report containing this rule and other required information to the U.S. Senate, the U.S. House of Representatives, and the Comptroller General of the

    United States prior to publication of this final rule in the Federal

    Register. This final rule is not a ``major rule'' as defined by 5

    U.S.C. 804(2).

    Page 7707

    List of Subjects in 40 CFR Part 180

    Environmental protection, Administrative practice and procedure,

    Agricultural commodities, Pesticides and pests, Reporting and recordkeeping requirements.

    Dated: February 4, 2011.

    Lois Rossi,

    Director, Registration Division, Office of Pesticide Programs.

    Therefore, 40 CFR chapter I is amended as follows:

    PART 180--[AMENDED] 0 1. The authority citation for part 180 continues to read as follows:

    Authority: 21 U.S.C. 321(q), 346a and 371. 0 2. In Sec. 180.920, the table is amended by adding alphabetically the following inert ingredients to read as follows:

    Sec. 180.920 Inert ingredients used pre-harvest; exemptions from the requirement of a tolerance.

    * * * * *

    Inert ingredients

    Limits

    Uses

    * * * * * * * 1,4-Benzenedicarboxylic acid, dimethyl

    For use in honeybee hive miticide Component of controlled release ester, polymer with 1,4-butanediol, adipic formulations.

    agent. acid, and hexamethylene diisocyanate, minimum number average molecular weight

    (in amu) 30,000 (CAS Reg. No. 55231-08-8).

    * * * * * * *

    FR Doc. 2011-3111 Filed 2-10-11; 8:45 am

    BILLING CODE 6560-50-P

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT