Federal Acquisition Regulation; Revision to Standard Forms for Bonds

Federal Register, Volume 81 Issue 135 (Thursday, July 14, 2016)

Federal Register Volume 81, Number 135 (Thursday, July 14, 2016)

Rules and Regulations

Pages 45855-45866

From the Federal Register Online via the Government Publishing Office www.gpo.gov

FR Doc No: 2016-16248

-----------------------------------------------------------------------

DEPARTMENT OF DEFENSE

GENERAL SERVICES ADMINISTRATION

NATIONAL AERONAUTICS AND SPACE ADMINISTRATION

48 CFR Part 53

FAC 2005-89; FAR Case 2015-025; Item IV; Docket No. 2015-0025, Sequence No. 1

RIN 9000-AN11

Federal Acquisition Regulation; Revision to Standard Forms for Bonds

AGENCY: Department of Defense (DoD), General Services Administration (GSA), and National Aeronautics and Space Administration (NASA).

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: DoD, GSA, and NASA are issuing a final rule to amend five Standard Forms prescribed by the Federal Acquisition Regulation (FAR) for contracts involving bonds and other financial protections. The revisions are aimed at clarifying liability limitations and expanding the options for organization types.

DATES: Effective: August 15, 2016.

FOR FURTHER INFORMATION CONTACT: Ms. Kathlyn J. Hopkins, Procurement Analyst, at 202-969-7226, for clarification of content. For information pertaining to status or publication schedules, contact the Regulatory Secretariat Division at 202-501-4755. Please cite FAC 2005-89, FAR Case 2015-025.

SUPPLEMENTARY INFORMATION:

1. Background

   DoD, GSA, and NASA published a proposed rule in the Federal Register at 80 FR 63485 on October 20, 2015, soliciting public comments on clarifying liability limitations and expanding the options for organization types on Standard Forms (SFs) 24, 25, 25A, 34, and 35. The proposed rule addressed concerns that surety bond producers may be adversely affected by differing Federal Agency views on the proper type of organization to indicate on these Standard Forms when the subject business was a limited liability company (LLC), an increasingly prevalent form of business in the construction industry. The proposed rule added a box labelled ``Other: (Specify)'' to the ``Type of Organization'' block on each of the five forms (SFs 24, 25, 25A, 34, and 35) in order to expand the range of business types to include not just LLCs, but others, as they evolve.

   Page 45856

   In addition, given recent questions from the construction industry regarding the appropriate value to report in the ``Liability Limit'' block on these Standard Forms, the proposed rule added clarifying instructions to the appropriate SFs (24, 25, and 25A). Finally, the proposed rule made various editorial corrections to the existing instructions.

   Three respondents submitted public comments.

2. Discussion and Analysis

   The Civilian Agency Acquisition Council and the Defense Acquisition Regulations Council (the Councils) reviewed the public comments in the development of the final rule. A discussion of the comments is provided as follows:

   1. Summary of Significant Changes

      There were no changes made to the rule as a result of the comments received.

   2. Analysis of Public Comments

      1. Support for the Rule

         Comment: Three respondents expressed support for the changes, highlighting their helpfulness to the procurement process, both by reducing confusion and by promoting efficient completion of forms. Moreover, two respondents affirmed that LLCs were a common type of business within the construction industry.

         Response: The Government notes the public support for this rule.

      2. Clarification of Liability Limit

         Comment: One respondent, while applauding the improvements proposed for the forms' instructions, suggested additional clarifications. The respondent noted that sureties that provide bonds must hold a Certificate of Authority, and be identified as such in the U.S. Treasury Circular 570, which sets forth the underwriting limitations for each company. Pursuant to 31 CFR 223.11, a surety bond producer may write a bond in excess of its underwriting limitation if exceptions such as co-surety arrangements or reinsurance coverages exist. The respondent's specific concern was that a contracting officer might, upon comparing the amount in the ``Liability Limit'' block to the surety producer's underwriting limit, reject the bond without exploring the applicability of exceptions.

         Response: The Government appreciates this concern, but notes that the proposed rule included instructions that clearly differentiate between individual sureties and co-surety arrangements, and how to complete the ``Liability Limit'' block in each case. Additionally, the instructions refer to the Treasury's list (Circular 570). Note (b) in Circular 570 specifically addresses the relationship between penal sum (face amount) and underwriting limitations, as well as exceptions and protections (co-insurance, reinsurance, or other methods in accordance with 31 CFR 223.10 and 223.11).

3. Executive Orders 12866 and 13563

   Executive Orders (E.O.s) 12866 and 13563 direct agencies to assess all costs and benefits of available regulatory alternatives and, if regulation is necessary, to select regulatory approaches that maximize net benefits (including potential economic, environmental, public health and safety effects, distributive impacts, and equity). E.O. 13563 emphasizes the importance of quantifying both costs and benefits, of reducing costs, of harmonizing rules, and of promoting flexibility. This is not a significant regulatory action and, therefore, was not subject to review under section 6(b) of E.O. 12866, Regulatory Planning and Review, dated September 30, 1993. This rule is not a major rule under 5 U.S.C. 804.

4. Regulatory Flexibility Act

   DoD, GSA and NASA have prepared a Final Regulatory Flexibility Analysis (FRFA) consistent with the Regulatory Flexibility Act 5 U.S.C. 601, et seq. The FRFA is summarized as follows:

   The final rule amends five Standard Forms to provide more choices for organization types on five Standard Forms and to clarify instructions; the action's objective is to make the forms more reflective of current forms of business in the construction industry.

   There were no significant issues raised by the public in response to the Initial Regulatory Flexibility Analysis provided in the proposed rule.

   The final rule applies to all entities, both small and other than small, performing as contractors or subcontractors on U.S. Government contracts that require bonds and other financial protections. The Federal Procurement Data System indicates that the U.S. Government awarded 3,495 new construction contracts that required bonds and other financial protections from October 1, 2014 through August 4, 2015. Approximately 78 percent (2,711) of the total awards (3,495) were awarded to small entities (comprised of 1,687 unique small entities).

   There are no reporting or recordkeeping requirements associated with this rule. There were no significant alternatives identified that would meet the objective of the rule. However, the small entities will not be materially affected by this rule, as it simply allows all businesses to choose from a broader array of organization types.

   Interested parties may obtain a copy of the FRFA from the Regulatory Secretariat Division. The Regulatory Secretariat Division has submitted a copy of the FRFA to the Chief Counsel for Advocacy of the Small Business Administration.

5. Paperwork Reduction Act

   This rule affects the information collection requirements in the provisions at FAR 28.1 and 28.2; 52.228-1; 52.228-2; 52.228-13, 52.228-

   15; and 52.228-16, currently approved under OMB Control Number 9000-

   0045, titled: Bid Guarantees, Performance, and Payments Bonds, in accordance with the Paperwork Reduction Act (44 U.S.C. chapter 35). The impact, however, is negligible, because this rule simply provides additional choices for offerors in characterizing their organization types on SFs 24, 25, 25A, 34, and 35, as well as clarifying what offerors should specify in terms of liability limits.

   List of Subjects in 48 CFR Part 53

   Government procurement.

   Dated: June 30, 2016.

   William F. Clark,

   Director, Office of Government-wide Acquisition Policy, Office of Acquisition Policy, Office of Government-wide Policy.

   Therefore, DoD, GSA, and NASA amend 48 CFR part 53 as set forth below:

   0

   1. The authority citation for 48 CFR part 53 continues to read as follows:

      PART 53--FORMS

      Authority: 40 U.S.C. 121(c); 10 U.S.C. chapter 137; and 51 U.S.C. 20113.

      0

   2. Amend section 53.228 by revising paragraphs (a) through (g) to read as follows:

      53.228 Bonds and insurance.

      * * * * *

      (a) SF 24 (Rev. 8/2016) Bid Bond. (See 28.106-1.) SF 24 is authorized for local reproduction and can be found in the GSA Forms Library at http://www.gsa.gov/forms.

      (b) SF 25 (Rev. 8/2016) Performance Bond. (See 28.106-1(b).) SF 25 is authorized for local reproduction and can be found in the GSA Forms Library at http://www.gsa.gov/forms.

      (c) SF 25A (Rev. 8/2016) Payment Bond. (See 28.106-1(c).) SF 25A is authorized for local reproduction and can be found in the GSA Forms Library at http://www.gsa.gov/forms.

      (d) SF 25B (Rev. 10/83), Continuation Sheet (For Standard Forms 24, 25, and 25A) (See 28.106-1(d).) This form can

      Page 45857

      be found in the GSA Forms Library at http://www.gsa.gov/forms.

      (e) SF 28 (Rev. 6/03) Affidavit of Individual Surety. (See 28.106-

      1(e) and 28.203(b).) SF 28 is authorized for local reproduction and can be found in the GSA Forms Library at http://www.gsa.gov/forms.

      (f) SF 34 (Rev. (8/2016) Annual Bid Bond. (See 28.106-1(f).) SF 34 is authorized for local reproduction and can be found in the GSA Forms Library at http://www.gsa.gov/forms.

      (g) SF 35 (Rev. 8/2016) Annual Performance Bond. (See 28.106-1.) SF 35 is authorized for local reproduction and can be found in the GSA Forms Library at http://www.gsa.gov/forms.

      * * * * *

      0

   3. Revise section 53.301-24 to read as follows:

      53.301-24 Bid Bond.

      BILLING CODE 6820-14-P

      GRAPHIC TIFF OMITTED TR14JY16.004

      Page 45858

      GRAPHIC TIFF OMITTED TR14JY16.005

      Page 45859

      0

   4. Revise section 53.301-25 to read as follows:

      53.301-25 Performance Bond.

      GRAPHIC TIFF OMITTED TR14JY16.006

      Page 45860

      GRAPHIC TIFF OMITTED TR14JY16.007

      Page 45861

      0

   5. Revise section 53.301-25A to read as follows:

      53.301-25A Payment Bond.

      GRAPHIC TIFF OMITTED TR14JY16.008

      Page 45862

      GRAPHIC TIFF OMITTED TR14JY16.009

      Page 45863

      0

   6. Revise section 53.301-34 to read as follows:

      53.301-34 Annual Bid Bond.

      GRAPHIC TIFF OMITTED TR14JY16.010

      Page 45864

      GRAPHIC TIFF OMITTED TR14JY16.011

      Page 45865

      0

   7. Revise section 53.301-35 to read as follows:

      53.301-35 Annual Performance Bond.

      GRAPHIC TIFF OMITTED TR14JY16.012

      Page 45866

      GRAPHIC TIFF OMITTED TR14JY16.013

      FR Doc. 2016-16248 Filed 7-13-16; 8:45 a.m.

      BILLING CODE 6820-14-C