Foreign-Trade Zone (FTZ) 106-Oklahoma City, Oklahoma; Authorization of Production Activity; Miraclon Corporation (Flexographic/Aluminum Printing Plates and Direct/Thermo Imaging Layer Film); Weatherford, Oklahoma

Published date01 March 2021
Citation86 FR 11921
Record Number2021-04102
SectionNotices
CourtForeign-trade Zones Board
11921
Federal Register / Vol. 86, No. 38 / Monday, March 1, 2021 / Notices
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–64–2020]
Foreign-Trade Zone (FTZ) 106—
Oklahoma City, Oklahoma;
Authorization of Production Activity;
Miraclon Corporation (Flexographic/
Aluminum Printing Plates and Direct/
Thermo Imaging Layer Film);
Weatherford, Oklahoma
On October 27, 2020, Miraclon
Corporation submitted a notification of
proposed production activity to the FTZ
Board for its facility within Subzone
106F, in Weatherford, Oklahoma.
The notification was processed in
accordance with the regulations of the
FTZ Board (15 CFR part 400), including
notice in the Federal Register inviting
public comment (85 FR 70580,
November 5, 2020). On February 24,
2021, the applicant was notified of the
FTZ Board’s decision that no further
review of the activity is warranted at
this time. The production activity
described in the notification was
authorized, subject to the FTZ Act and
the FTZ Board’s regulations, including
Section 400.14.
Dated: February 24, 2021.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2021–04102 Filed 2–26–21; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–13–2021]
Foreign-Trade Zone (FTZ) 72—
Indianapolis, Indiana; Notification of
Proposed Production Activity; XPO
Logistics (Wearable Electronic
Communication/Data Device Kitting);
Clayton, Indiana
XPO Logistics (XPO) submitted a
notification of proposed production
activity to the FTZ Board for its facility
in Clayton, Indiana. The notification
conforming to the requirements of the
regulations of the FTZ Board (15 CFR
400.22) was received on February 18,
2021.
The XPO facility is located within
FTZ 72. The facility is used for the
kitting of wearable electronic
communication/data devices with
watch bands of various materials.
Pursuant to 15 CFR 400.14(b), FTZ
activity would be limited to the specific
foreign-status materials and components
and specific finished product described
in the submitted notification (as
described below) and subsequently
authorized by the FTZ Board.
Production under FTZ procedures
could exempt XPO from customs duty
payments on the foreign-status
components used in export production.
On its domestic sales, for the foreign-
status materials/components noted
below, XPO would be able to choose the
duty rate during customs entry
procedures that applies to wearable
electronic communication/data devices
(duty-free). XPO would be able to avoid
duty on foreign-status components
which become scrap/waste. Customs
duties also could possibly be deferred or
reduced on foreign-status production
equipment.
The components and materials
sourced from abroad include wearable
electronic communication/data devices
and watch bands of leather, steel,
silicon and woven nylon textile material
(duty rate ranges from duty-free to
11.2%). The request indicates that
certain materials/components are
subject to duties under Section 301 of
the Trade Act of 1974 (Section 301),
depending on the country of origin. The
applicable Section 301 decisions require
subject merchandise to be admitted to
FTZs in privileged foreign status (19
CFR 146.41).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary and sent to: ftz@trade.gov. The
closing period for their receipt is April
12, 2021.
A copy of the notification will be
available for public inspection in the
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact Diane
Finver at Diane.Finver@trade.gov.
Dated: February 24, 2021.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2021–04103 Filed 2–26–21; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
Foreign-Trade Zones Board
[B–12–2021]
Foreign-Trade Zone (FTZ) 5—Seattle,
Washington; Notification of Proposed
Production Activity; Juno
Therapeutics, Inc.
(Biopharmaceuticals); Bothell,
Washington
Juno Therapeutics, Inc. (Juno)
submitted a notification of proposed
production activity to the FTZ Board for
its facility in Bothell, Washington. The
notification conforming to the
requirements of the regulations of the
FTZ Board (15 CFR 400.22) was
received on February 12, 2021.
A separate application has been
submitted for FTZ designation at the
company’s facility under FTZ 5. The
facility is used for the production of cell
therapy products. Pursuant to 15 CFR
400.14(b), FTZ activity would be limited
to the specific foreign-status material
and specific finished product described
in the submitted notification (as
described below) and subsequently
authorized by the FTZ Board.
Production under FTZ procedures
could exempt Juno from customs duty
payments on the foreign-status material
used in export production. On its
domestic sales, for the foreign-status
material noted below, Juno would be
able to choose the duty rate during
customs entry procedures that applies to
cell therapy products (duty-free). Juno
would be able to avoid duty on foreign-
status material which becomes scrap/
waste. Customs duties also could
possibly be deferred or reduced on
foreign-status production equipment.
The material sourced from abroad is
human primary cells (‘‘T-cells’’) (duty-
free).
Public comment is invited from
interested parties. Submissions shall be
addressed to the Board’s Executive
Secretary and sent to: ftz@trade.gov. The
closing period for their receipt is April
12, 2021.
A copy of the notification will be
available for public inspection in the
‘‘Reading Room’’ section of the Board’s
website, which is accessible via
www.trade.gov/ftz.
For further information, contact Diane
Finver at Diane.Finver@trade.gov or
(202) 482–1367.
Dated: February 22, 2021.
Andrew McGilvray,
Executive Secretary.
[FR Doc. 2021–04104 Filed 2–26–21; 8:45 am]
BILLING CODE 3510–DS–P
DEPARTMENT OF COMMERCE
International Trade Administration
Antidumping or Countervailing Duty
Order, Finding, or Suspended
Investigation; Opportunity To Request
Administrative Review
AGENCY
: Enforcement and Compliance,
International Trade Administration,
Department of Commerce.
FOR FURTHER INFORMATION CONTACT
:
Brenda E. Brown, Office of AD/CVD
VerDate Sep<11>2014 18:48 Feb 26, 2021 Jkt 253001 PO 00000 Frm 00003 Fmt 4703 Sfmt 4703 E:\FR\FM\01MRN1.SGM 01MRN1

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT