Foreign-Trade Zone (FTZ) 38-Spartanburg County, South Carolina; Notification of Proposed Production Activity; Black & Decker (U.S.), Inc. (Production and Kitting of Power Tools and Injection Molded Parts); Fort Mill, South Carolina

• Published date: 06 April 2021
• Record Number: 2021-07018
• Section: Notices
• Court: Foreign-trade Zones Board

17771

Federal Register / Vol. 86, No. 64 / Tuesday, April 6, 2021 / Notices

Agriculture, and Related Agencies

Appropriation Bill for fiscal year 1988.

The charter for the NACMCF is

available for viewing on the FSIS

internet web page at https://

www.fsis.usda.gov/wps/portal/fsis/

topics/data-collection-and-reports/

nacmcf/committee-charter.

The NACMCF provides scientific

advice and recommendations to the

Secretary of Agriculture and the

Secretary of Health and Human Services

on public health issues relative to the

safety and wholesomeness of the U.S.

food supply, including development of

microbiological criteria and review and

evaluation of epidemiological and risk

assessment data and methodologies for

assessing microbiological hazards in

foods. The Committee also provides

scientific advice and recommendations

to the Centers for Disease Control and

Prevention and the Departments of

Commerce and Defense.

Mrs. Sandra Eskin, Deputy Under

Secretary for Food Safety, USDA, is the

Acting Committee Chair; Dr. Susan T.

Mayne, Director of the Food and Drug

Administration’s Center for Food Safety

and Applied Nutrition (CFSAN), is the

Vice-Chair; and Mr. John J. Jarosh, FSIS,

is the Director of the NACMCF

Secretariat and Designated Federal

Officer.

Documents Reviewed by NACMCF

FSIS will make the draft reports

considered by NACMCF regarding its

deliberations available to the public

prior to the Plenary Session on the FSIS

web page.

Disclaimer: NACMCF documents and

comments posted on the FSIS website

are electronic conversions from a variety

of source formats. In some cases,

document conversion may result in

character translation or formatting

errors. The original document is the

official, legal copy.

In order to meet the electronic and

information technology accessibility

standards in Section 508 of the

Rehabilitation Act, NACMCF may add

alternate text descriptors for non-text

elements (graphs, charts, tables,

multimedia, etc.). These modifications

only affect the internet copies of the

documents.

Copyrighted documents will not be

posted on the FSIS website, but will be

available for inspection in the FSIS

Docket Room.

Additional Public Notification

Public awareness of all segments of

rulemaking and policy development is

important. Consequently, FSIS will

announce this Federal Register

publication on-line through the FSIS

web page located at: https://

www.fsis.usda.gov/federal-register.

FSIS also will make copies of this

publication available through the FSIS

Constituent Update, which is used to

provide information regarding FSIS

policies, procedures, regulations,

Federal Register notices, FSIS public

meetings, and other types of information

that could affect or would be of interest

to our constituents and stakeholders.

The Constituent Update is available on

the FSIS web page. Through the web

page, FSIS is able to provide

information to a much broader, more

diverse audience. In addition, FSIS

offers an email subscription service

which provides automatic and

customized access to selected food

safety news and information. This

service is available at: https://

www.fsis.usda.gov/subscribe. Options

range from recalls to export information,

regulations, directives, and notices.

Customers can add or delete

subscriptions themselves and have the

option to password protect their

accounts.

USDA Nondiscrimination Statement

In accordance with Federal civil

rights law and U.S. Department of

Agriculture (USDA) civil rights

regulations and policies, the USDA, its

Agencies, offices, and employees, and

institutions participating in or

administering USDA programs are

prohibited from discriminating based on

race, color, national origin, religion, sex,

gender identity (including gender

expression), sexual orientation,

disability, age, marital status, family/

parental status, income derived from a

public assistance program, political

beliefs, or reprisal or retaliation for prior

civil rights activity, in any program or

activity conducted or funded by USDA

(not all bases apply to all programs).

Remedies and complaint filing

deadlines vary by program or incident.

Persons with disabilities who require

alternative means of communication for

program information (e.g., Braille, large

print, audiotape, American Sign

Language, etc.) should contact the

responsible Agency or USDA’s TARGET

Center at (202) 720–2600 (voice and

TTY) or contact USDA through the

Federal Relay Service at (800) 877–8339.

Additionally, program information may

be made available in languages other

than English.

To file a program discrimination

complaint, complete the USDA Program

Discrimination Complaint Form, AD–

3027, found online at How to File a

Program Discrimination Complaint and

at any USDA office or write a letter

addressed to USDA and provide in the

letter all of the information requested in

the form. To request a copy of the

complaint form, call (866) 632–9992.

Submit your completed form or letter to

USDA by: (1) Mail: U.S. Department of

Agriculture, Office of the Assistant

Secretary for Civil Rights, 1400

Independence Avenue SW, Washington,

DC 20250–9410; (2) fax: (202) 690–7442;

or (3) email: program.intake@usda.gov.

USDA is an equal opportunity

provider, employer, and lender.

Done at Washington, DC, on March 31,

2021.

Cikena Reid,

USDA Committee Management Officer.

[FR Doc. 2021–06993 Filed 4–5–21; 8:45 am]

BILLING CODE 3410–DM–P

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B–26–2021]

Foreign-Trade Zone (FTZ) 38—

Spartanburg County, South Carolina;

Notification of Proposed Production

Activity; Black & Decker (U.S.), Inc.

(Production and Kitting of Power Tools

and Injection Molded Parts); Fort Mill,

South Carolina

Black & Decker (U.S.), Inc. (Black &

Decker) submitted a notification of

proposed production activity to the FTZ

Board for its facility in Fort Mill, South

Carolina. The notification conforming to

the requirements of the regulations of

the FTZ Board (15 CFR 400.22) was

received on March 30, 2021.

Black & Decker already has authority

for the production and kitting of certain

power tools and related components

within Subzone 38M. The current

request would add finished products

and foreign-status materials/

components to the scope of authority.

Pursuant to 15 CFR 400.14(b),

additional FTZ authority would be

limited to the specific foreign-status

materials/components and specific

finished products described in the

submitted notification (as described

below) and subsequently authorized by

the FTZ Board.

Production under FTZ procedures

could exempt Black & Decker from

customs duty payments on the foreign-

status materials/components used in

export production. On its domestic

sales, for the foreign-status materials/

components noted below and in the

existing scope of authority, Black &

Decker would be able to choose the duty

rates during customs entry procedures

that apply to cable tray cutters, pipe

expanders (PEX), cordless staplers, and

VerDate Sep<11>2014 17:34 Apr 05, 2021 Jkt 253001 PO 00000 Frm 00005 Fmt 4703 Sfmt 4703 E:\FR\FM\06APN1.SGM 06APN1

khammond on DSKJM1Z7X2PROD with NOTICES

17772

Federal Register / Vol. 86, No. 64 / Tuesday, April 6, 2021 / Notices

1

See Antidumping or Countervailing Duty Order,

Finding, or Suspended Investigation; Opportunity

to Request Administrative Review, 85 FR 39531

(July 1, 2020).

plastic molded parts (compressor

shrouds, mower shrouds and mower

decks) (duty-free). Black & Decker

would be able to avoid duty on foreign-

status components which become scrap/

waste. Customs duties also could

possibly be deferred or reduced on

foreign-status production equipment.

The materials/components that may

be sourced from abroad include: Belt

hooks (metal); hex wrenches (metal);

tubular rivets (metal); wire channels

(plastic channel to hold wires); cable

cutter parts (metal): Moving blocks,

cutter heads, cutting blocks; cable cutter

parts (plastic): Linkage triggers, housing

pocket covers; cable cutter transmission

parts (metal): Cutter holders, head

flanges, shear block supports; stapler

magazine parts (metal): Machined

magazines, cores, staple pushers,

frames, noses, nose covers; stapler

magazine hub and cylinder assemblies

(metal and plastic); stapler parts (metal):

Drive bolts, boot straps, carriages,

drivers, lower spring seats, guide rails,

U channel lug rails, backdrive pawls,

contact trips; stapler parts (plastic):

Inner rings, cable guides, wire magazine

covers; stapler transmission assembly

parts (metal): Lift wheels, drive shaft

bushings, front wear plates; PEX

expander parts: Expander heads (metal),

linkages (metal and plastic); PEX

transmission parts (metal): Support

plates, spindle cones, collars;

transmission parts (metal): Spindle

cams, cam and index, piston sleeves;

lenses for LED lights; LED light

assemblies; and, wire harness

assemblies (duty rate ranges from duty-

free to 9%). The request indicates that

certain materials/components are

subject to duties under Section 301 of

the Trade Act of 1974 (Section 301),

depending on the country of origin. The

applicable Section 301 decisions require

subject merchandise to be admitted to

FTZs in privileged foreign status (19

CFR 146.41).

Public comment is invited from

interested parties. Submissions shall be

addressed to the Board’s Executive

Secretary and sent to: ftz@trade.gov. The

closing period for their receipt is May

17, 2021.

A copy of the notification will be

available for public inspection in the

‘‘Reading Room’’ section of the Board’s

website, which is accessible via

www.trade.gov/ftz.

For further information, contact Diane

Finver at Diane.Finver@trade.gov.

Dated: March 31, 2021.

Andrew McGilvray,

Executive Secretary.

[FR Doc. 2021–07018 Filed 4–5–21; 8:45 am]

BILLING CODE 3510–DS–P

DEPARTMENT OF COMMERCE

Foreign-Trade Zones Board

[B–27–2021]

Foreign-Trade Zone (FTZ) 106—

Oklahoma City, Oklahoma; Notification

of Proposed Production Activity;

Miraclon Corporation (Flexographic/

Aluminum Printing Plates and Direct

Imaging/Thermo Imaging Layer Film);

Weatherford, Oklahoma

Miraclon Corporation (Miraclon)

submitted a notification of proposed

production activity to the FTZ Board for

its facility in Weatherford, Oklahoma.

The notification conforming to the

requirements of the regulations of the

FTZ Board (15 CFR 400.22) was

received on March 17, 2021.

Miraclon already has authority to

produce flexographic printing plates,

aluminum printing plates, direct

imaging film, and thermo imaging layer

film within Subzone 106F (originally

approved as Eastman Kodak Company).

The current request would add a

foreign-status material to the scope of

authority. Pursuant to 15 CFR 400.14(b),

additional FTZ authority would be

limited to the specific foreign-status

material described in the submitted

notification (as described below) and

subsequently authorized by the FTZ

Board.

Production under FTZ procedures

could exempt Miraclon from customs

duty payments on the foreign-status

material used in export production. On

its domestic sales, for the foreign-status

material noted, Miraclon would be able

to choose the duty rates during customs

entry procedures that apply to

flexographic printing plates, aluminum

printing plates, direct imaging film, and

thermo imaging layer film (duty-free to

3.7%). Miraclon would be able to avoid

duty on foreign-status material which

becomes scrap/waste. Customs duties

also could possibly be deferred or

reduced on foreign-status production

equipment.

The material sourced from abroad is

foam plastic sheets (duty rate, 6.5%).

The request indicates that foam plastic

sheets are subject to duties under

Section 301 of the Trade Act of 1974

(Section 301), depending on the country

of origin. The applicable Section 301

decisions require subject merchandise

to be admitted to FTZs in privileged

foreign status (19 CFR 146.41).

Public comment is invited from

interested parties. Submissions shall be

addressed to the Board’s Executive

Secretary and sent to: ftz@trade.gov. The

closing period for their receipt is May

17, 2021.

A copy of the notification will be

available for public inspection in the

‘‘Reading Room’’ section of the Board’s

website, which is accessible via

www.trade.gov/ftz.

For further information, contact Diane

Finver at Diane.Finver@trade.gov.

Dated: April 1, 2021.

Andrew McGilvray,

Executive Secretary.

[FR Doc. 2021–07017 Filed 4–5–21; 8:45 am]

BILLING CODE 3510–DS–P

DEPARTMENT OF COMMERCE

International Trade Administration

[A–570–084]

Certain Quartz Surface Products From

the People’s Republic of China:

Preliminary Results of the

Antidumping Duty Administrative

Review and Rescission of

Administrative Review, in Part; 2018–

2020

AGENCY

: Enforcement and Compliance,

International Trade Administration,

Department of Commerce.

SUMMARY

: The Department of Commerce

(Commerce) is conducting an

administrative review of the

antidumping duty (AD) order on certain

quartz surface products (quartz surface

products) from the People’s Republic of

China (China). The period of review

(POR) is November 20, 2018, through

June 30, 2020. Commerce preliminarily

finds that certain companies made sales

of subject merchandise at less than

normal value. We are also rescinding

this review for nine companies where

timely requests for withdrawals were

filed by all parties who requested the

reviews. Interested parties are invited to

comment on these preliminary results.

DATES

: Applicable April 6, 2021.

FOR FURTHER INFORMATION CONTACT

:

Benjamin A. Luberda, AD/CVD

Operations, Office II, Enforcement and

Compliance, International Trade

Administration, U.S. Department of

Commerce, 1401 Constitution Avenue

NW, Washington, DC 20230; telephone:

(202) 482–2185.

SUPPLEMENTARY INFORMATION

:

Background

On July 1, 2020, Commerce published

in the Federal Register a notice of

opportunity to request an administrative

review of the AD order on quartz surface

products from China.

1

Commerce

VerDate Sep<11>2014 17:34 Apr 05, 2021 Jkt 253001 PO 00000 Frm 00006 Fmt 4703 Sfmt 4703 E:\FR\FM\06APN1.SGM 06APN1

khammond on DSKJM1Z7X2PROD with NOTICES