Forging Machines; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements

Federal Register, Volume 79 Issue 125 (Monday, June 30, 2014)

Federal Register Volume 79, Number 125 (Monday, June 30, 2014)

Notices

Pages 36832-36834

From the Federal Register Online via the Government Printing Office www.gpo.gov

FR Doc No: 2014-15234

-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

Docket No. OSHA-2011-0064

Forging Machines; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

Page 36833

SUMMARY: OSHA solicits public comments concerning its proposal to extend OMB approval of the information collection requirements contained in its standard on Forging Machines (29 CFR 1910.218). The paperwork provisions of the Forging Machines Standard specify requirements for developing and maintaining inspection records and for identifying manually operated valves and switches.

DATES: Comments must be submitted (postmarked, sent, or received) by August 29, 2014.

ADDRESSES:

Electronically: You may submit comments and attachments electronically at http://www.regulations.gov, which is the Federal eRulemaking Portal. Follow the instructions online for submitting comments.

Facsimile: If your comments, including attachments, are not longer than 10 pages you may fax them to the OSHA Docket Office at (202) 693-

1648.

Mail, hand delivery, express mail, messenger, or courier service: When using this method, you must submit a copy of your comments and attachments to the OSHA Docket Office, Docket No. OSHA-2011-0064, U.S. Department of Labor, Occupational Safety and Health Administration, Room N-2625, 200 Constitution Avenue NW., Washington, DC 20210. Deliveries (hand, express mail, messenger, and courier service) are accepted during the Department of Labor's and Docket Office's normal business hours, 8:15 a.m. to 4:45 p.m., e.t.

Instructions: All submissions must include the Agency name and the OSHA docket number (OSHA-2011-0064) for the Information Collection Request (ICR). All comments, including any personal information you provide, are placed in the public docket without change and may be made available online at http://www.regulations.gov. For further information on submitting comments, see the ``Public Participation'' heading in the section of this notice titled SUPPLEMENTARY INFORMATION.

Docket: To read or download comments or other material in the docket, go to http://www.regulations.gov or the OSHA Docket Office at the address above. All documents in the docket (including this Federal Register notice) are listed in the http://www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download from the Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. You may also contact Theda Kenney at the address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609, 200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-

2222.

SUPPLEMENTARY INFORMATION:

  1. Background

    The Department of Labor, as part of its continuing effort to reduce paperwork and respondent (i.e., employer) burden, conducts a preclearance consultation program to provide the public with an opportunity to comment on proposed and continuing information collection requirements in accord with the Paperwork Reduction Act of 1995 (PRA-95)(44 U.S.C. 3506(c)(2)(A)). This program ensures that information is in the desired format, reporting burden (time and costs) is minimal, collection instruments are clearly understood, and OSHA's estimate of the information collection burden is accurate. The Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 et seq.) authorizes information collection by employers as necessary or appropriate for enforcement of the Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain such information with minimum burden upon employers, especially those operating small businesses, and to reduce to the maximum extent feasible unnecessary duplication of efforts in obtaining information (29 U.S.C. 657).

    The following sections describe who uses the information collected under each requirement, as well as how they use it. The purpose of these requirements is to reduce workers' risk of death or serious injury by ensuring that forging machines used by them are in safe operating condition, and that workers are able to clearly and properly identify manually operated valves and switches.

    Inspection of Forging Machines, Guards, and Point-of-Operation Protection Devices (paragraphs (a)(2)(i) and (a)(2)(ii)). Paragraph (a)(2)(i) requires employers to establish periodic and regular maintenance safety checks and to develop and maintain a certification record of each inspection. The certification record must include the date of the inspection, the signature of the person who performed the inspection, and the serial number (or other identifier) of the forging machine inspected. Under paragraph (a)(2)(ii), employers are to schedule regular and frequent inspections of guards and point-of-

    operation protection devices and to prepare a certification record of each inspection that contains the date of the inspection, the signature of the person who performed the inspection, and the serial number (or other identifier) of the equipment inspected. These inspection certification records provide assurance to employers, workers, and OSHA compliance officers that forging machines, guards, and point-of-

    operation protection devices have been inspected, and that they will operate properly and safely, thereby preventing impact injuries or death to workers during forging operations. These records also provide the most efficient means for OSHA compliance officers to determine that an employer is complying with the Forging Machines Standard.

    Identification of Manually Controlled Valves and Switches (paragraphs (c), (h)(3), (i)(1) and (i)(2)). These paragraphs require proper and clear identification of manually operated valves and switches on presses, upsetters, boltheading equipment, and rivet-making machines, respectively. Marking valves and switches provide information to workers to help ensure that they operate the forging machines correctly and safely.

  2. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:

    Whether the proposed information collection requirements are necessary for the proper performance of the Agency's functions, including whether the information is useful;

    The accuracy of OSHA's estimate of the burden (time and costs) of the information collection requirements, including the validity of the methodology and assumptions used;

    The quality, utility, and clarity of the information collected; and

    Ways to minimize the burden on employers who must comply; for example, by using automated or other technological information collection and transmission techniques.

  3. Proposed Actions

    OSHA is requesting that OMB extend its approval of the information collection requirements contained in the Standard on Forging Machines (29 CFR 1910.218). The Agency is requesting to retain its current burden hour estimate of 187,264 hours associated with this

    Page 36834

    Standard. The Agency will summarize the comments submitted in response to this notice and will include this summary in the request to OMB.

    Type of Review: Extension of a currently approved collection.

    Title: Forging Machines (29 CFR 1910.218).

    OMB Control Number: 1218-0228.

    Affected Public: Business or other for-profits.

    Number of Respondents: 27,700.

    Number of Responses: 1,440,788.

    Frequency of Responses: Bi-weekly.

    Average Time per Response: Varies from 2 minutes (.03 hour) for an employer to disclose certification records to 8 minutes (.13 hour) for a manufacturing employee to conduct a biweekly inspection of each forging machine and guard or point-of-operation protection device.

    Estimated Total Burden Hours: 187,264.

    Estimated Cost Operation and Maintenance): $0.

  4. Public Participation--Submission of Comments on This Notice and Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: (1) electronically at http://www.regulations.gov, which is the Federal eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All comments, attachments, and other material must identify the Agency name and the OSHA docket number (Docket No. OSHA-2011-0064) for the ICR. You may supplement electronic submissions by uploading document files electronically. If you wish to mail additional materials in reference to an electronic or facsimile submission, you must submit them to the OSHA Docket Office (see the section of this notice titled ADDRESSES). The additional materials must clearly identify your electronic comments by your name, date, and the docket number so the Agency can attach them to your comments.

    Because of security procedures, the use of regular mail may cause a significant delay in the receipt of comments. For information about security procedures concerning the delivery of materials by hand, express delivery, messenger, or courier service, please contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).

    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about submitting personal information such as social security numbers and date of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted material) is not publicly available to read or download from this Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Information on using the http://www.regulations.gov Web site to submit comments and access the docket is available at the Web site's ``User Tips'' link. Contact the OSHA Docket Office for information about materials not available from the Web site and for assistance in using the Internet to locate docket submissions.

  5. Authority and Signature

    David Michaels, Ph.D., MPH, Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 (77 FR 3912).

    Signed at Washington, DC, on June 25, 2014.

    David Michaels,

    Assistant Secretary of Labor for Occupational Safety and Health.

    FR Doc. 2014-15234 Filed 6-27-14; 8:45 am

    BILLING CODE 4510-26-P

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT