Antidumping: Hot-rolled flat-rolled carbon-quality steel products from Brazil and Japan,
[Federal Register: May 26, 2005 (Volume 70, Number 101)]
[Notices]
[Page 30413-30415]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr26my05-37]
DEPARTMENT OF COMMERCE
International Trade Administration
(A-351-828, A-588-846)
Continuation of Antidumping Duty Orders; Certain Hot-Rolled Flat- Rolled Carbon-Quality Steel Products From Brazil and Japan
AGENCY: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: As a result of the determinations by the Department of Commerce (``the Department'') and the International Trade Commission (``ITC'') that revocation of the antidumping duty orders on certain hot-rolled flat-rolled carbon-quality steel products from Brazil and Japan would likely lead to continuation or recurrence of dumping, and material injury to an industry in the United States, the Department is publishing notice of the continuation of these antidumping duty orders.
EFFECTIVE DATE: May 12, 2005.
FOR FURTHER INFORMATION CONTACT: Martha V. Douthit, Office of Policy, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-5050.
SUPPLEMENTARY INFORMATION:
Background
On May 3, 2004, the Department initiated and the ITC instituted sunset reviews of the antidumping duty orders on certain hot-rolled flat-rolled carbon-quality steel products from Brazil and Japan, pursuant to section 751(c) of the Tariff Act of 1930, as amended (``the Act'').\1\
\1\ See Initiation of Five-year (``Sunset'') Reviews, 69 FR 24118 (May 3, 2004) and ITC's Investigation Nos. 701-TA-384 and 731- TA-806-808 (Reviews), 69 FR 24189 (May 3, 2004).
As a result of its reviews, the Department found that revocation of the antidumping duty orders would likely lead to continuation or recurrence of dumping and notified the ITC of the magnitude of the margins likely to prevail were the order to be revoked.\2\
\2\ See Certain Hot-Rolled Flat-Rolled Carbon-Quality Steel Products From Brazil; Final Results of the Expedited Sunset Review of Antidumping Duty Order), 69 FR 54630 (September 9, 2004).
On May 5, 2005, the ITC determined pursuant to section 751(c) of the Act, that revocation of the antidumping duty orders on certain hot- rolled flat-rolled carbon-quality steel products from Brazil and Japan would likely lead to continuation or recurrence of material injury to an industry in the United States within a reasonably foreseeable time.\3\
\3\ See Investigation No. 701-TA-384 and 731-TA-806-808 (Review), 70 FR 23886 (May 5, 2005).
Scope of the Orders
See Appendices 1 and 2
Determination
As a result of the determinations by the Department and the ITC that revocation of these antidumping duty orders would likely lead to continuation or recurrence of dumping and material injury to an industry in the United States, pursuant to section 751(d)(2) of
[[Page 30414]]
the Act, the Department hereby orders the continuation of the antidumping duty orders on certain hot-rolled flat-rolled carbon- quality steel products from Brazil and Japan.
As provided in 19 CFR 351.218(f)(4), the Department normally will issue its determination to continue an order not later than seven days after the date of publication in the Federal Register of the ITC's determination concluding the sunset review and immediately thereafter will publish its notice of continuation in the Federal Register. In the instant case, however, the Department's publication of the Notice of Continuation was delayed. The Department has explicitly indicated that the effective date of continuation of this finding is May 12, 2005, seven days after the date of publication in the Federal Register of the ITC's determination. As a result, pursuant to sections 751(c)(2) and 751(c)(6)(A) of the Act, the Department intends to initiate the next five-year review of these orders not later than April 2010.
These five-year (sunset) reviews and notice are in accordance with section 751(c) of the Act and 19 CFR 351.218(f)(4).
Dated: May 20, 2005. Joseph A. Spetrini, Acting Assistant Secretary for Import Administration.
APPENDIX 1
Scope of the Order: Brazil (A-351-828)
The products covered under the antidumping duty order are certain hot-rolled flat-rolled carbon-quality steel products, meeting the physical parameters described below, regardless of application.
The hot-rolled flat-rolled carbon-quality steel products subject to this order are of a rectangular shape, of a width of 0.5 inch of greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics of other non-metallic substances, in coils (whether or not in successively superimposed layers) regardless of thickness, and in straight lengths, of a thickness less than 4.75 mm and of a width measuring at least 10 times the thickness. Specifically included in this scope are vacuum degassed, fully stabilized (IF) steels, high strength low alloy (HSLA) steels, and the substrate for motor lamination steels. Steel products to be included in the scope of this order, regardless of Harmonized Tariff Schedule of the United States (``HTSUS'') definitions, are products in which: (1) iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds certain specified quantities.
The merchandise subject to the order is currently classifiable under subheadings 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 7211.19.75.60, 7211.19.75.90, 7212.40.10.00, 7212.40.50.00, and 7212.50.00.00 of the HTSUS. Certain hot-rolled flat-rolled carbon-quality steel covered by this order, including vacuum degassed and fully stabilized, high strength low alloy, and the substrate for motor lamination steel may also enter under tariff numbers 7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30, 7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of the order is dispositive.
APPENDIX 2
Scope of the Order: Japan (A-588-846)
The products covered under the antidumping duty order are certain hot-rolled flat-rolled carbon-quality steel products of a rectangular shape, of a width of 0.5 inch or greater, neither clad, plated, nor coated with metal and whether or not painted, varnished, or coated with plastics or other non-metallic substances, in coils (whether or not in successively superimposed layers) regardless of thickness, and in straight lengths, of a thickness less than 4.75 mm and of a width measuring at least 10 times the thickness. Universal mill plate (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm but not exceeding 1250 mm and of a thickness of not less than 4 mm, not in coils and without patterns in relief) of a thickness not less than 4.0 mm is not included within the scope of this order.
Specifically included in this scope are vacuum degassed, fully stabilized (commonly referred to as interstitial-free (``IF'') steels, high strength low alloy (``HSLA'') steels, and the substrate for motor lamination steels. IF steels are recognized as low carbon steels with micro-alloying levels of elements such as titanium and/or niobium added to stabilize carbon and nitrogen elements. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum. The substrate for motor lamination steels contains micro-alloying levels of elements such as silicon and aluminum.
Steel products to be included in the scope of this order, regardless of HTSUS definitions, are products in which: (1) iron predominates, by weight, over each of the other contained elements; (2) the carbon content is 2 percent or less, by weight; and (3) none of the elements listed below exceeds the quantity, by weight, respectively indicated:
1.80 percent of manganese, or
1.50 percent of silicon, or
1.00 percent of copper, or
0.50 percent of aluminum, or
1.25 percent of chromium, or
0.30 percent of cobalt, or
0.40 percent of lead, or
1.25 percent of nickel, or
0.30 percent of tungsten, or
0.012 percent of boron, or
0.10 percent of molybdenum, or
0.10 percent of niobium, or
0.41 percent of titanium, or
0.15 percent of vanadium, or
0.15 percent of zirconium.
All products that meet the physical and chemical description provided above are within the scope of this order unless otherwise excluded. The following products, by way of example, are outside and/or specifically excluded from the scope of this order:
Alloy hot-rolled steel products in which at least one of the chemical elements exceeds those listed above (including e.g., ASTM specifications A543, A387, A514, A517, and A506) SAE/AISI grades of series 2300 and higher. Ball bearing steels, as defined in the HTSUS Tool steels, as defined in the HTSUS. Silico-manganese (as defined in the HTSUS) or silicon electrical steel with a silicon level exceeding 1.50 percent.
ASTM specifications A710 and A736. USS Abrasion-resistant steels (USS AR 400, USS AR 500). Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications:
[[Page 30415]]
Mn
P
S
Si
Cr
Cu
Ni
0.10-0.14%...................................................
0.90% 0.025% 0.005%
0.30-
0.50-
0.20-
0.20% Max
Max
Max
0.50%
0.70%
0.40%
Max
Width = 44.80 inches maximum; Thickness = 0.063--0.198 inches; Yield Strength = 50,000 ksi minimum; Tensil Strength = 70,000 88,000 psi.
Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications:
C
Mn
P
S
Si
Cr
Cu
Ni
Mo
0.10-0.16%......................................
0.70- 0.025% 0.006%
0.30- 0.50-0.25%
0.20
0.21 0.90%
Max
Max
0.50%
0.70%
Max
%
% ........... ........... ........... ........... ........... ...........
Max
Max
Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum; Tensile Strength = 105,000 psi Aim.
Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications:
C
Mn
P
S
Si
Cr
Cu
Ni V(wt.) Cb
0.10-......................................................... 1.30- 0.025 0.005 0.30- 0.50- 0.20- ........ 0.10 0.08% 0.14%......................................................... 1.80%
%
% 0.50% 0.70% 0.40% 0.20% Max Max ........ Max Max ........ ........ ........ Max
Width = 44.80 inches maximum; Thickness = 0.350 inches maximum; Yield Strength = 80,000 ksi minimum Tensile Strength = 105,000 psi Aim.
Hot-rolled steel coil which meets the following chemical, physical and mechanical specifications.
C
Mn
P
S
Si
Cr
Cu
Ni
Nb
Ca
Al
0.15%............................................... 1.40% 0.025 0.010 0.50% 1.00% 0.50% 0.20% 0.005 Treated 0.01- Max................................................. Max % Max % Max Max Max Max Max %Max ........ 0.07%
Width = 39.37 inches; Thickness = 0.181 inches maximum; Yield Strength = 70,000 psi minimum for thickness 0.148 inches; account for 64 FR 38650 Tensile Strength = 80,000 psi minimum.
Hot-rolled dual phase steel, phase-hardened, primarily with a ferritic-martensitic microstructure, contains 0.9 percent up to and including 1.5 percent silicon by weight, further characterized by silicon by either (i) tensile strength between 540 N/mm[bds2] and 640 N/mm[bds2] and an elongation percentage > 26 percent account for 64 FR 38650, for thickness of 2 mm and above, or (ii) a tensile strength between 590 N/mm[bds2] and 640 N/mm[bds2] and an elongation percentage $ 25 percent for thickness of 2 mm and above.
Hot-rolled bearing quality steel, SAE grade 1050, in coils, with an inclusion rating of 1.0 maximum per ASTM E 45, Method A, with excellent surface quality and chemistry restrictions as follows: 0.012 percent maximum phosphorus, 0.015 percent maximum sulfur, and 0.20 percent maximum residuals including 0.15 percent maximum chromium.
Grade ASTM A570-50 hot-rolled steel sheet in coils or cut lengths, width of 74 inches (nominal, within ASTM tolerances), thickness of 11 gauge (0.119 nominal), mill edge and skin passed, with a minimum copper content of 0.20 percent.
The covered merchandise is classified in the HTSUS as subheadings: 7208.10.15.00, 7208.10.30.00, 7208.10.60.00, 7208.25.30.00, 7208.25.60.00, 7208.26.00.30, 7208.26.00.60, 7208.27.00.30, 7208.27.00.60, 7208.36.00.30, 7208.36.00.60, 7208.37.00.30, 7208.37.00.60, 7208.38.00.15, 7208.38.00.30, 7208.38.00.90, 7208.39.00.15, 7208.39.00.30, 7208.39.00.90, 7208.40.60.30, 7208.40.60.60, 7208.53.00.00, 7208.54.00.00, 7208.90.00.00, 7210.70.30.00, 7210.90.90.00, 7211.14.00.30, 7211.14.00.90, 7211.19.15.00, 7211.19.20.00, 7211.19.30.00, 7211.19.45.00, 7211.19.60.00, 7211.19.75.30, 7211.19.75.60, 7211.19.75.90, 7212.40.10.00, 7212.40.50.00, 7212.50.00.00.
Certain hot-rolled flat-rolled carbon-quality steel covered by this order including: vacuum degassed, fully stabilized; high strength low alloy; and the substrate for motor lamination steel may also enter under the following tariff numbers: 7225.11.00.00, 7225.19.00.00, 7225.30.30.50, 7225.30.70.00, 7225.40.70.00, 7225.99.00.90, 7226.11.10.00, 7226.11.90.30, 7226.11.90.60, 7226.19.10.00, 7226.19.90.00, 7226.91.50.00, 7226.91.70.00, 7226.91.80.00, and 7226.99.00.00.
Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the covered merchandise is dispositive.
[FR Doc. E5-2679 Filed 5-25-05; 8:45 am]
