Modification to the List of Appropriate NRTL Program Test Standards and the Scope of Recognition of Several NRTLs
| Court | Occupational Safety And Health Administration |
| Citation | 88 FR 62821 |
| Published date | 13 September 2023 |
| Record Number | 2023-19713 |
| Section | Notices |
Federal Register, Volume 88 Issue 176 (Wednesday, September 13, 2023)
[Federal Register Volume 88, Number 176 (Wednesday, September 13, 2023)]
[Notices]
[Pages 62821-62827]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2023-19713]
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. OSHA-2013-0012]
Modification to the List of Appropriate NRTL Program Test
Standards and the Scope of Recognition of Several NRTLs
AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: In this notice, OSHA announces the final decision to delete
test standards from the Nationally Recognized Testing Laboratories
(NRTL) Program's list of appropriate test standards and modify the
scope of recognition of several NRTLs.
DATES: The actions contained in this notice will become effective on
September 13, 2023.
FOR FURTHER INFORMATION CONTACT: Information regarding this notice is
available from the following sources:
Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office
of Communications, U.S. Department of Labor, telephone: (202) 693-1999;
email: [email protected].
General and technical information: Contact Mr. Kevin Robinson,
Director, Office of Technical Programs and Coordination Activities,
Directorate of Technical Support and Emergency Management, Occupational
Safety and Health Administration, U.S. Department of Labor, telephone:
(202) 693-2110 or email: [email protected]. OSHA's web page
includes information about the NRTL Program (see http://www.osha.gov/dts/otpca/nrtl/index.html).
SUPPLEMENTARY INFORMATION:
I. Background
The NRTL Program recognizes organizations that provide product-
safety testing and certification services to manufacturers. These
organizations perform testing and certification for purposes of the
program, to U.S. consensus-based product-safety test standards. The
products covered by the NRTL Program consist of those items for which
OSHA safety standards require ``certification'' by a NRTL. The
requirements affect electrical products and 36 other types of products.
OSHA does not develop or issue these test standards, but generally
relies on standards development organizations (SDOs), which develop and
maintain the standards using a method that provides for input and
consideration of views of industry groups, experts, users, consumers,
governmental authorities, and others having broad experience in the
safety field involved.
A. Deletion and Replacement of Test Standards
The NRTL Program regulations require that appropriate test
standards be maintained and current (29 CFR 1910.7(c)). A test standard
withdrawn by an SDO is no longer considered an appropriate test
standard (CPL 01-00-004, NRTL Program Policies, Procedures and
Guidelines Directive (NRTL Program Directive), Ch. 2.IX.C.1). It is
OSHA's policy to remove recognition of withdrawn test standards by
issuing a correction notice in the Federal Register for all NRTLs
recognized for the withdrawn test standards (Id.). However, SDOs
frequently will designate a replacement standard for withdrawn
standards. OSHA will recognize a NRTL for an appropriate replacement
test standard if the NRTL has the requisite testing and evaluation
capability for the replacement test standard (NRTL Program Directive,
Ch. 2.IX.C.2).
One method that NRTLs may use to show such capability involves an
analysis to determine whether any testing and evaluation requirements
of existing test standards in a NRTL's scope are comparable (i.e., are
completely or substantially identical) to the requirements in the
replacement test standard (NRTL Program Directive, Ch. 2.IX.C.3). If
OSHA's analysis shows the replacement test standard does not require
additional or different technical capability than an existing test
standard(s), and the replacement test standard is comparable to the
existing test standard(s), then OSHA can add the replacement test
standard to affected NRTLs' scope of recognition. If OSHA's analysis
shows the replacement test standard requires an additional or different
technical capability, or the replacement test standard is not
comparable to any existing test standards, each affected NRTL seeking
to have OSHA add the replacement test standard to the NRTL's scope of
recognition must provide information to OSHA that demonstrates
technical capability (NRTL Program Directive, Ch. 2.IX.D).
B. Other Reasons for Removal of Test Standards From the NRTL List of
Appropriate Test Standards
OSHA may choose to remove a test standard from the NRTL list of
appropriate test standards based on an internal review in which NRTL
Program staff review the NRTL list of appropriate test standards to
determine if the test standards conform to the definition of an
appropriate test standard defined in NRTL Program regulations and
policy. There are several reasons for removing a test standard based on
this review. First, a document that provides the methodology for a
single test is a test method rather than an appropriate test standard
(29 CFR 1910.7(c)). A test standard must specify the safety
requirements for a specific type of product(s) (NRTL Program Directive,
Ch. 2.VIII.C.1). A test method, however, is a specified technical
procedure for performing a test. As such, a test method is not an
appropriate test standard. While a NRTL may use a test method to
determine if certain safety requirements are met, a test method is not
itself a safety requirement for a specific product category.
Second, a document that focuses primarily on usage, installation,
or maintenance requirements, and not
[[Page 62822]]
safety requirements (i.e., features, parts, capabilities, usage
limitations, or installation requirements that would create a potential
hazard in operating the equipment if not properly used), would also not
be considered an appropriate test standard (NRTL Program Directive, Ch.
2.VIII.C.1). In some cases, however, a document may also provide safety
test specifications in addition to usage, installation, and maintenance
requirements. In such cases, the document would be retained as an
appropriate test standard based on the safety test specifications.
Finally, a document may not be considered an appropriate test
standard if the document covers products for which OSHA does not
require testing and certification (NRTL Program Directive, Ch.
2.VIII.C.2). Similarly, a document that covers electrical product
components would not be considered an appropriate test standard. These
documents apply to types of components that have limitation(s) or
condition(s) on their use, which are not appropriate for use as end-use
products. These documents also specify that these types of components
are for use only as part of an end-use product. NRTLs, however,
evaluate such components only in the context of evaluating whether end-
use products requiring NRTL approval are safe for use in the workplace.
Accordingly, as a matter of policy, OSHA considers that documents
covering such components are not appropriate test standards under the
NRTL Program. OSHA notes, however, that it is not proposing to delete
from NRTLs' scope of recognition any test standards covering end-use
products that contain such components.
In addition, OSHA notes that, to conform to a test standard
covering an end-use product, a NRTL must still determine that the
components in the product comply with the components' specific test
standards. In making this determination, NRTLs may (within the confines
of the requirements of Annex B, Section 7.4 G and H of the NRTL Program
Policies, Procedures, and Guidelines, OSHA Instruction CPL 01-00-004
(Oct. 1, 2019) (the NRTL Program Directive, available at https://www.osha.gov/sites/default/files/enforcement/directives/CPL_01-00-004.pdf)) test the components themselves or accept the testing of a
qualified testing organization that a given component conforms to the
particular test standard. OSHA reviews each NRTL's procedures to
determine which approach the NRTL will use to address components and
reviews the end-use product testing to verify that the NRTL
appropriately addresses that product's components.
II. Summary of Proposed Actions
In a July 12, 2023 Federal Register notice (88 FR 44406, referred
to in this notice as ``Proposed Modification,'' and available at
www.regulations.gov under Docket ID OSHA-2013-0012-0030), OSHA proposed
to delete several test standards from the NRTL Program's list of
appropriate test standards; incorporate two replacement standards into
the NRTL Program's list of appropriate test standards; remove deleted
test standards from the scopes of recognition of several NRTLs; and add
to the scopes of recognition of some of these NRTLs replacement test
standards, as applicable. The notice requested public comment on the
proposal; however, no comments were received in response to the Federal
Register notice. As will be explained below, OSHA is issuing a final
decision on these matters as proposed, without modification.
III. Final Decision To Remove Test Standards From the NRTL Program's
List of Appropriate Test Standards
In this notice, OSHA announces the final decision to delete several
withdrawn test standards from the NRTL Program's List of Appropriate
Test Standards. OSHA also announces the final decision to incorporate
into the NRTL Program's List of Appropriate Test Standards two
replacement test standards. These final actions are detailed below in
Table 1.
Table 1--Test Standards OSHA Is Removing From NRTL Program's List of Appropriate Test Standards
----------------------------------------------------------------------------------------------------------------
Deleted test standard Test standard title Reason for deletion Replacement standard
----------------------------------------------------------------------------------------------------------------
ANSI/AAMI ES60601-1:2005/(R)2012..... Medical Electrical Standard has been ANSI/AAMI ES 60601-1
Equipment, Part 1: amended by a SDO. Medical Electrical
General Requirements Equipment--Part 1:
for Basic Safety and General Requirements
Essential Performance for Basic Safety and
(with amendments). Essential Performance.
AAMI ES60601-1:2005/(R)2012.......... Medical Electrical Standard has been .......................
Equipment, Part 1: amended by a SDO.
General Requirements
for Basic Safety and
Essential Performance
(with amendments).
AAMI ES60601-1....................... Medical Electrical Standard has been .......................
Equipment, Part 1: amended by a SDO.
General Requirements
for Basic Safety and
Essential Performance
(with amendments).
UL 60601-1........................... Medical Electrical Withdrawn.............. None.
Equipment, Part 1:
General Requirements
for Safety.
UL 60730-1A.......................... Automatic Electrical Standard has been UL 60730-1 Automatic
Controls for Household amended by a SDO. Electrical Controls--
and Similar Use; Part Part 1: General
1: General Requirements.
Requirements.
IEEE C37.013......................... AC High-Voltage Withdrawn.............. None.
Generator Circuit
Breakers Rated on a
Symmetrical Current
Basis.
IEEE C37.46.......................... Power Fuses and Fuse Withdrawn.............. None.
Disconnecting Switches.
IEEE C37.47.......................... Distribution Fuse Withdrawn.............. None.
Disconnecting
Switches, Fuse
Supports, and Current-
Limiting Fuses.
ISA 82.02.02......................... Electrical Equipment Withdrawn.............. None.
for Measurement,
Control and Laboratory
Use.
[[Page 62823]]
NFPA 16.............................. Installation of Foam Withdrawn.............. None.
Water Sprinkler and
Foam-Water Spray
Systems.
UL 17................................ Vent or Chimney Withdrawn.............. None.
Connector Dampers for
Oil-Fired Appliances.
UL 250............................... Household Refrigerators Withdrawn.............. None.
and Freezers.
UL 474............................... Dehumidifiers.......... Withdrawn.............. None.
UL 664............................... Commercial (Class IV) Withdrawn.............. None.
Electric Dry-Cleaning
Machines.
UL 745-2-5........................... Particular Requirements Withdrawn.............. None.
for Circular Saws and
Circular Knives.
UL 745-2-14.......................... Particular Requirements Withdrawn.............. None.
for Planers.
UL 745-2-35.......................... Particular Requirements Withdrawn.............. None.
for Drain Cleaners.
UL 873............................... Electrical Temperature- Withdrawn.............. None.
Indicating and -
Regulating Equipment.
UL 984............................... Hermetic Refrigerant Withdrawn.............. None.
Motor-Compressors.
UL 1028.............................. Electric Hair-Clipping Withdrawn.............. None.
and -Shaving
Appliances.
UL 1054.............................. Special-Use Switches... Withdrawn.............. None.
UL 1626.............................. Residential Sprinklers Withdrawn.............. None.
for Fire Protection
Service.
UL 1662.............................. Electric Chain Saws.... Withdrawn.............. None.
UL 1767.............................. Early-Suppression Fast- Withdrawn.............. None.
Response Sprinklers.
UL 65................................ Electric Wired Cabinets Withdrawn.............. None.
UL 508C.............................. Power Conversion Withdrawn.............. None.
Equipment.
----------------------------------------------------------------------------------------------------------------
IV. Final Decision To Modify Affected NRTLs' Scope of Recognition
In this notice, OSHA announces the final decision to remove test
standards (those listed in Table 1, above) from the scopes of
recognition of several NRTLs and to add to the scopes of recognition of
some of these NRTLs replacement test standards, as applicable. The
tables in this section (Table 2 through Table 16) list, for each
affected NRTL, the test standard(s) that OSHA is removing from the
scope of recognition of the NRTL, along with the test standard(s) that
OSHA will incorporate into the scope of recognition to replace
withdrawn (and deleted) test standards, as applicable.
Table 2--Test Standard OSHA Is Removing From/Adding to the Scope of
Recognition of Bureau Veritas Consumer Products Services, Inc.
------------------------------------------------------------------------
Replacement test
Test standard being removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
ANSI/AAMI ES60601-1:2005/(R)2012 Standard has been ANSI/AAMI ES 60601-
amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
------------------------------------------------------------------------
Table 3--Test Standards OSHA Is Removing From/Adding to the Scope of
Recognition of CSA Group Testing & Certification Inc.
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
AAMI ES 60601-1:2005/(R)2012.... Standard has been ANSI/AAMI ES 60601-
amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
UL 60601-1...................... Withdrawn......... None.
UL 60730-1A..................... Standard has been UL 60730-1
amended by a SDO. Automatic
Electrical
Controls--Part 1:
General
Requirements.
IEEE C37.013.................... Withdrawn......... None.
IEEE C37.46..................... Withdrawn......... None.
IEEE C37.47..................... Withdrawn......... None.
UL 65........................... Withdrawn......... None.
UL 250.......................... Withdrawn......... None.
UL 474.......................... Withdrawn......... None.
UL 508C......................... Withdrawn......... None.
[[Page 62824]]
UL 664.......................... Withdrawn......... None.
UL 745-2-14..................... Withdrawn......... None.
UL 745-2-35..................... Withdrawn......... None.
UL 873.......................... Withdrawn......... None.
UL 984.......................... Withdrawn......... None.
UL 1028......................... Withdrawn......... None.
UL 1054......................... Withdrawn......... None.
UL 1662......................... Withdrawn......... None.
------------------------------------------------------------------------
Table 4--Test Standards OSHA Is Removing From/Adding to the Scope
Recognition of DEKRA Certification Inc.
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
AAMI 60601-1.................... Standard has been ANSI/AAMI ES 60601-
amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
------------------------------------------------------------------------
Table 5--Test Standards OSHA Is Removing From/Adding to the Scope of
Recognition of Eurofins Electrical and Electronic Testing Na, Inc. a/k/a
MET Laboratories, Inc.
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
ANSI/AAMI ES60601-1:2005/(R)2012 Standard has been ANSI/AAMI ES 60601-
amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
UL 60601-1...................... Withdrawn......... None.
UL 65........................... Withdrawn......... None.
UL 250.......................... Withdrawn......... None.
UL 474.......................... Withdrawn......... None.
UL 508C......................... Withdrawn......... None.
UL 664.......................... Withdrawn......... None.
UL 745-2-5...................... Withdrawn......... None.
UL 745-2-14..................... Withdrawn......... None.
UL 745-2-35..................... Withdrawn......... None.
UL 1028......................... Withdrawn......... None.
UL 1054......................... Withdrawn......... None.
UL 1662......................... Withdrawn......... None.
------------------------------------------------------------------------
Table 6--Test Standards OSHA Is Removing From the Scope of Recognition
of FM Approvals
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
ISA 82.02.02.................... Withdrawn......... None.
UL 664.......................... Withdrawn......... None.
------------------------------------------------------------------------
Table 7--Test Standards OSHA Is Removing From/Adding to the Scope of
Recognition of Intertek Testing Services NA, Inc.
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
ANSI/AAMI ES60601-1:2005/(R)2012 Standard has been ANSI/AAMI ES 60601-
amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
UL 60601-1...................... Withdrawn......... None.
UL 60730-1A..................... Standard has been UL 60730-1
amended by a SDO. Automatic
Electrical
Controls--Part 1:
General
Requirements.
IEEE C37.013.................... Withdrawn......... None.
IEEE C37.46..................... Withdrawn......... None.
ISA 82.02.02.................... Withdrawn......... None.
UL 17........................... Withdrawn......... None.
UL 65........................... Withdrawn......... None.
UL 250.......................... Withdrawn......... None.
UL 474.......................... Withdrawn......... None.
[[Page 62825]]
UL 508C......................... Withdrawn......... None.
UL 664.......................... Withdrawn......... None.
UL 745-2-14..................... Withdrawn......... None.
UL 745-2-35..................... Withdrawn......... None.
UL 873.......................... Withdrawn......... None.
UL 984.......................... Withdrawn......... None.
UL 1028......................... Withdrawn......... None.
UL 1054......................... Withdrawn......... None.
UL 1662......................... Withdrawn......... None.
------------------------------------------------------------------------
Table 8--Test Standards OSHA Is Removing From/Adding to the Scope of
Recognition of Nemko North America, Inc.
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
ANSI/AAMI ES60601-1:2005/(R)2012 Standard has been ANSI/AAMI ES 60601-
amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
UL 60601-1...................... Withdrawn......... None.
UL 250.......................... Withdrawn......... None.
------------------------------------------------------------------------
Table 9--Test Standards OSHA Is Removing From the Scope of Recognition
of NSF International
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
UL 65........................... Withdrawn......... None.
UL 250.......................... Withdrawn......... None.
UL 873.......................... Withdrawn......... None.
------------------------------------------------------------------------
Table 10--Test Standards OSHA Is Removing From/Adding to the Scope of
Recognition of QAI Laboratories, LTD
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
AAMI ES60601-1.................. Standard has been ANSI/AAMI ES 60601-
amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
------------------------------------------------------------------------
Table 11--Test Standards OSHA Is Removing From/Adding to the Scope of
Recognition of QPS Evaluation Services, Inc.
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
ANSI/AAMI ES 60601-1: 2005/ Standard has been ANSI/AAMI ES 60601-
(R)2012. amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
UL 60601-1...................... Withdrawn......... None.
------------------------------------------------------------------------
Table 12--Test Standards OSHA Is Removing From/Adding to the Scope of
Recognition of SGS North America, Inc.
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
ANSI/AAMI ES60601-1:2005/(R)2012 Standard has been ANSI/AAMI ES 60601-
amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
UL 60601-1...................... Withdrawn......... None.
UL 65........................... Withdrawn......... None.
UL 250.......................... Withdrawn......... None.
UL 474.......................... Withdrawn......... None.
[[Page 62826]]
UL 1028......................... Withdrawn......... None.
------------------------------------------------------------------------
Table 13--Test Standards OSHA Is Removing From/Adding to the Scope of
Recognition of TUV Rheinland of North America, Inc.
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
AAMI ES60601-1:2005/(R)2012..... Standard has been ANSI/AAMI ES 60601-
amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
UL 60601-1...................... Withdrawn......... None.
UL 60730-1A..................... Standard has been UL 60730-1
amended by a SDO. Automatic
Electrical
Controls--Part 1:
General
Requirements.
UL 65........................... Withdrawn......... None.
UL 250.......................... Withdrawn......... None.
UL 474.......................... Withdrawn......... None.
UL 508C......................... Withdrawn......... None.
UL 664.......................... Withdrawn......... None.
UL 745-2-14..................... Withdrawn......... None.
UL 745-2-35..................... Withdrawn......... None.
UL 984.......................... Withdrawn......... None.
UL 1028......................... Withdrawn......... None.
UL 1054......................... Withdrawn......... None.
UL 1662......................... Withdrawn......... None.
------------------------------------------------------------------------
Table 14--Test Standards OSHA Is Removing From/Adding to the Scope of
Recognition of T[Uuml]V S[Uuml]D America, Inc.
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
ANSI/AAMI ES60601-1:2005/(R)2012 Standard has been ANSI/AAMI ES 60601-
amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
UL 60601-1...................... Withdrawn......... None.
UL 60730-1A..................... Standard has been UL 60730-1
amended by a SDO. Automatic
Electrical
Controls--Part 1:
General
Requirements.
UL 250.......................... Withdrawn......... None.
UL 474.......................... Withdrawn......... None.
UL 508c......................... Withdrawn......... None.
UL 745-2-14..................... Withdrawn......... None.
UL 745-2-35..................... Withdrawn......... None.
UL 873.......................... Withdrawn......... None.
UL 984.......................... Withdrawn......... None.
UL 1028......................... Withdrawn......... None.
UL 1662......................... Withdrawn......... None.
------------------------------------------------------------------------
Table 15--Test Standards OSHA Is Removing From/Adding to the Scope of
Recognition of T[Uuml]V S[Uuml]D Product Services GmbH
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
UL 60601-1...................... Withdrawn......... None.
UL 60730-1A..................... Standard has been UL 60730-1
amended by a SDO. Automatic
Electrical
Controls--Part 1:
General
Requirements.
UL 250.......................... Withdrawn......... None.
UL 474.......................... Withdrawn......... None.
UL 745-2-14..................... Withdrawn......... None.
UL 745-2-35..................... Withdrawn......... None.
UL 873.......................... Withdrawn......... None.
------------------------------------------------------------------------
[[Page 62827]]
Table 16--Test Standards OSHA Is Removing From/Adding to the Scope of
Recognition of UL LLC
------------------------------------------------------------------------
Replacement test
Test standard to be removed Reason for removal standard(s) (if
applicable)
------------------------------------------------------------------------
ANSI/AAMI ES60601-1:2005/(R)2012 Standard has been ANSI/AAMI ES 60601-
amended by a SDO. 1 Medical
Electrical
Equipment--Part
1: General
Requirements for
Basic Safety and
Essential
Performance.
UL 60601-1...................... Withdrawn......... None.
UL 60730-1A..................... Standard has been UL 61730-1 Already
amended by a SDO. in UL's Scope of
Recognition.
IEEE C37.013.................... Withdrawn......... None.
IEEE C37.46..................... Withdrawn......... None.
IEEE C37.47..................... Withdrawn......... None.
UL 17........................... Withdrawn......... None.
UL 65........................... Withdrawn......... None.
UL 250.......................... Withdrawn......... None.
UL 474.......................... Withdrawn......... None.
UL 508C......................... Withdrawn......... None.
UL 664.......................... Withdrawn......... None.
UL 745-2-14..................... Withdrawn......... None.
UL 745-2-35..................... Withdrawn......... None.
UL 873.......................... Withdrawn......... None.
UL 984.......................... Withdrawn......... None.
UL 1028......................... Withdrawn......... None.
UL 1054......................... Withdrawn......... None.
UL 1626......................... Withdrawn......... None.
UL 1662......................... Withdrawn......... None.
UL 1767......................... Withdrawn......... None.
------------------------------------------------------------------------
OSHA will place on its informational web pages the modifications to
each NRTL's scope of recognition. These web pages detail the scope of
recognition for each NRTL, including the test standards the NRTL may
use to test and certify products under OSHA's NRTL Program. OSHA also
will add to the list of ``Appropriate Test Standards'' web page those
test standards added to the NRTL Program's List of Appropriate Test
Standards. The agency will add to the ``Standards No Longer
Recognized'' web page those test standards that OSHA no longer
recognizes or permits under the NRTL Program. Access to these web pages
is available at http://www.osha.gov/dts/otpca/nrtl/index.html.
V. Authority and Signature
James S. Frederick, Deputy Assistant Secretary of Labor for
Occupational Safety and Health, authorized the preparation of this
notice. Accordingly, the agency is issuing this notice pursuant to 29
U.S.C. 657(g)(2), Secretary of Labor's Order No. 8-2020 (85 FR 58393,
Sept. 18, 2020), and 29 CFR 1910.7.
Signed at Washington, DC, on September 6, 2023.
James S. Frederick,
Deputy Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2023-19713 Filed 9-12-23; 8:45 am]
BILLING CODE 4510-26-P
