Request for Nominations for Voting Members on Public Advisory Panels or Committees

Federal Register: October 15, 2008 (Volume 73, Number 200)

Notices

Page 61140-61143

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

DOCID:fr15oc08-106

DEPARTMENT OF HEALTH AND HUMAN SERVICES

Food and Drug Administration

Docket No. FDA-2008-N-0038

Request for Nominations for Voting Members on Public Advisory

Panels or Committees

AGENCY: Food and Drug Administration, HHS.

ACTION: Notice.

SUMMARY: The Food and Drug Administration (FDA) is requesting nominations for voting members to serve on the Device Good

Manufacturing Practice Advisory Committee, certain device panels of the

Medical Devices Advisory Committee, the National Mammography Quality

Assurance Advisory Committee, and the Technical Electronic Products

Radiation Safety Standards Committee in the Center for Devices and

Radiological Health. Nominations will be accepted for current vacancies and those that will or may occur through August 31, 2009.

FDA has a special interest in ensuring that women, minority groups, and individuals with disabilities are adequately represented on advisory committees and, therefore, encourages nominations of qualified candidates from these groups.

DATES: Because scheduled vacancies occur on various dates throughout each year, no cutoff date is established for the receipt of nominations. However, when possible, nominations should be received at least 6 months before the date of scheduled vacancies for each year, as indicated in this notice.

ADDRESSES: All nomination for membership should be sent electronically to CV@OC.FDA.GOV, or by mail to Advisory Committee Oversight &

Management Staff (HF-4), 5600 Fishers Lane, rm. 15A-12, Rockville, MD 20857. Information about becoming a member on a FDA advisory committee can also be obtained by visiting FDA's Web site at http://www.fda.gov/ oc/advisory/default.htm.

FOR FURTHER INFORMATION CONTACT: Kathleen L. Walker, Center for Devices and Radiological Health (HFZ-17), Food and Drug Administration, 7520

Standish Pl., (MPN1), Rockville, MD 20855, 240-276-8938, e-mail:

Kathleen.Walker@fda.hhs.gov.

SUPPLEMENTARY INFORMATION:

1. Vacancies

   FDA is requesting nominations of voting members for vacancies listed as follows:

   Table 1.

   Current &

   Committee/Panel and Expertise Needed

   Upcoming

   Approximate Date

   Vacancies

   Needed

   Dental Products Panel of the Medical

   3 Immediately

   Devices Advisory Committee--dentists, engineers, and scientists who have expertise in the areas of dental implants, dental materials, periodontology, tissue engineering, and dental anatomy

   Medical Devices Dispute Resolution

   1 Immediately

   Panel of the Medical Devices Advisory

   Committee--experts with broad, cross- cutting scientific, clinical, analytical, or mediation skills 1 October 1, 2008

   Ear, Nose, and Throat Devices Panel of

   3 November 1, 2008 the Medical Devices Advisory

   Committee--otologists, neurotologists, audiologists

   Gastroenterology and Urology Devices

   3 January 1, 2009

   Panel of the Medical Devices Advisory

   Committee--transplant specialists, gastroenterologists, urologists, and nephrologists

   General and Plastic Surgery Devices

   2 September 1, 2009

   Panel of the Medical Devices Advisory

   Committee--surgeons (general, plastic, reconstructive, pediatric, thoracic, abdominal, pelvic, and endoscopic); dermatologists; experts in biomaterials, lasers, wound healing, and quality of life; and biostatisticians

   Hematology and Pathology Devices Panel

   2 Immediately of the Medical Devices Advisory

   Committee--hematologists (benign and/ or malignant hematology), hematopathologists (general and special hematology, coagulation and homeostasis, and hematological oncology), gynecologists with special interests in gynecological oncology, cytopathologists, and molecular pathologists with special interests in development of predictive and prognostic biomarkers 2 March 1, 2009

   Immunology Devices Panel of the

   1 Immediately

   Medical Devices Advisory Committee-- persons with experience in medical, surgical, or clinical oncology, internal medicine, clinical immunology, allergy, molecular diagnostics, or clinical laboratory medicine 2 March 1, 2009

   Page 61141

   Microbiology Devices Panel of the

   4 Immediately

   Medical Devices Advisory Committee-- infectious disease clinicians, e.g., pulmonary disease specialists, sexually transmitted disease specialists, pediatric infectious disease specialists, experts in tropical medicine and emerging infectious diseases, biofilm development; mycologists; clinical microbiologists and virologists; clinical virology and microbiology laboratory directors with expertise in clinical diagnosis and in vitro diagnostic assays, e.g., hepatologists; molecular biologists

   Molecular and Clinical Genetics

   3 Immediately

   Devices Panel of the Medical Devices

   Advisory Committee--experts in human genetics and in the clinical management of patients with genetic disorders, e.g., pediatricians, obstetricians, neonatologists; individuals with training in inborn errors of metabolism, biochemical and/ or molecular genetics, population genetics, epidemiology and related statistical training, and clinical molecular genetics testing (e.g., genotyping, array CGH, etc.); individuals with experience in genetics counseling, medical ethics are also desired, and individuals with experience in ancillary fields of study will be considered

   Neurological Devices Panel of the

   2 Immediately

   Medical Devices Advisory Committee-- neurosurgeons (cerebrovascular and pediatric), neurologists (stroke, pediatric, pain management, and movement disorders), interventional neuroradiologists, psychiatrists, and biostatisticians 2 December 1, 2008

   Obstetrics and Gynecology Devices

   3 Immediately

   Panel of the Medical Devices Advisory

   Committee--experts in perinatology, embryology, reproductive endocrinology, pediatric gynecology, gynecological oncology, operative hysteroscopy, pelviscopy, electrosurgery, laser surgery, assisted reproductive technologies, contraception, postoperative adhesions, and cervical cancer and colposcopy; biostatisticians and engineers with experience in obstetrics/gynecology devices; urogynecologists; experts in breast care; experts in gynecology in the older patient; experts in diagnostic

   (optical) spectroscopy; experts in midwifery; labor and delivery nursing 1 February 1, 2009

   Ophthalmic Devices Panel of the

   3 November 1, 2008

   Medical Devices Advisory Committee-- ophthalmologists specializing in cataract and refractive surgery and vitreo-retinal surgery, in addition to vision scientists, optometrists, and biostatisticians practiced in ophthalmic clinical trials

   Orthopaedic and Rehabilitation Devices

   3 Immediately

   Panel of the Medical Devices Advisory

   Committee--orthopedic surgeons

   (joint, spine, trauma, and pediatric); rheumatologists; engineers (biomedical, biomaterials, and biomechanical); experts in rehabilitation medicine, sports medicine, and connective tissue engineering; and biostatisticians 2 September 1, 2009

   Radiological Devices Panel of the

   2 February 1, 2009

   Medical Devices Advisory Committee-- physicians with experience in general radiology, mammography, ultrasound, magnetic resonance, computed tomography, other radiological subspecialties and radiation oncology; scientists with experience in diagnostic devices, radiation physics, statistical analysis, digital imaging and image analysis

   National Mammography Quality Assurance

   1 Immediately

   Advisory Committee--physicians, practitioners, or other health professionals whose clinical practice, research specialization, or professional expertise include a significant focus on mammography 3 February 1, 2009

   Device Good Manufacturing Practice

   7 Immediately

   Advisory Committee--vacancies include three government representatives, two public representatives, and two health professionals

   Technical Electronic Product Radiation

   15 Immediately

   Safety Standards Committee--vacancies include five government representatives, five industry representatives, and five general public representatives

2. Functions

   1. Medical Devices Advisory Committee

      The committee reviews and evaluates data on the safety and effectiveness of marketed and investigational devices and makes recommendations for their regulation. The panels engage in a number of activities to fulfill the functions of the Federal Food, Drug, and

      Cosmetic Act (the act) for device advisory panels. With the exception of the Medical Devices Dispute Resolution Panel, each panel, according to its specialty area, performs the following duties: (1) Advises the

      Commissioner of Food and Drugs (the Commissioner) regarding recommended classification or reclassification of devices into one of three regulatory categories, (2) advises on any possible risks to health associated with the use of devices, (3) advises on formulation of product development protocols, (4) reviews premarket approval applications for medical devices, (5) reviews guidelines and guidance documents, (6) recommends exemption of certain devices from the application of portions of the act, (7) advises on the necessity to ban a device, and (8) responds to requests from the agency to review and make recommendations on specific issues or problems concerning the safety and effectiveness of devices. With the exception of the Medical

      Devices Dispute Resolution Panel, each panel, according to its specialty area, may also make appropriate recommendations to

      Page 61142

      the Commissioner on issues relating to the design of clinical studies regarding the safety and effectiveness of marketed and investigational devices.

      The Dental Products Panel also functions at times as a dental drug panel. The functions of the dental drug panel are to evaluate and recommend whether various prescription drug products should be changed to over-the-counter status and to evaluate data and make recommendations concerning the approval of new dental drug products for human use.

      The Medical Devices Dispute Resolution Panel provides advice to the

      Commissioner on complex or contested scientific issues between FDA and medical device sponsors, applicants, or manufacturers relating to specific products, marketing applications, regulatory decisions and actions by FDA, and agency guidance and policies. The panel makes recommendations on issues that are lacking resolution, are highly complex in nature, or result from challenges to regular advisory panel proceedings or agency decisions or actions.

   2. National Mammography Quality Assurance Advisory Committee

      The functions of the committee are to advise FDA on the following topics: (1) Developing appropriate quality standards and regulations for mammography facilities; (2) developing appropriate standards and regulations for bodies accrediting mammography facilities under this program; (3) developing regulations with respect to sanctions; (4) developing procedures for monitoring compliance with standards; (5) establishing a mechanism to investigate consumer complaints; (6) reporting new developments concerning breast imaging, which should be considered in the oversight of mammography facilities; (7) determining whether there exists a shortage of mammography facilities in rural and health professional shortage areas and determining the effects of personnel on access to the services of such facilities in such areas;

      (8) determining whether there will exist a sufficient number of medical physicists after October 1, 1999, and (9) determining the costs and benefits of compliance with these requirements.

   3. Device Good Manufacturing Practice Advisory Committee

      The functions of the committee are to review proposed regulations regarding good manufacturing practices governing the methods used in, and the facilities and controls used for, manufacture, packaging, storage, installation, and servicing of devices, and to make recommendations regarding the feasibility and reasonableness of those proposed regulations. The committee also reviews and makes recommendations on proposed guidelines developed to assist the medical device industry in meeting the good manufacturing practice requirements, and provides advice with regard to any petition submitted by a manufacturer for an exemption or variance from good manufacturing practice regulations.

      Section 520 of the act (21 U.S.C. 360(j)), as amended, provides that the Device Good Manufacturing Practice Advisory Committee shall be composed of nine members as follows: (1) Three of the members shall be appointed from persons who are officers or employees of any Federal,

      State, or local government; (2) two shall be representatives of the interests of the device manufacturing industry; (3) two shall be representatives of the interests of physicians and other health professionals; and (4) two shall be representatives of the interests of the general public. The agency will publish a separate notice announcing the vacancies of two representatives of interests of the device manufacturing industry.

   4. Technical Electronic Product Radiation Safety Standards Committee

      The function of the committee is to provide advice and consultation on the technical feasibility, reasonableness, and practicability of performance standards for electronic products to control the emission of radiation from such products. The committee may recommend electronic product radiation safety standards for consideration.

      Section 534(f) of the act (21 U.S.C. 360kk(f)), as amended by the

      Safe Medical Devices Act of 1990, provides that the Technical

      Electronic Product Radiation Safety Standards Committee include five members from governmental agencies, including State or Federal

      Governments, five members from the affected industries, and five members from the general public, of which at least one shall be a representative of organized labor.

3. Qualifications

   1. Panels of the Medical Devices Advisory Committee

      Persons nominated for membership on the panels should have adequately diversified experience appropriate to the work of the panel in such fields as clinical and administrative medicine, engineering, biological and physical sciences, statistics, and other related professions. The nature of specialized training and experience necessary to qualify the nominee as an expert suitable for appointment may include experience in medical practice, teaching, and/or research relevant to the field of activity of the panel. The particular needs at this time for each panel are listed in section I of this document. The term of office is up to 4 years, depending on the appointment date.

   2. National Mammography Quality Assurance Advisory Committee

      Persons nominated for membership should be physicians, practitioners, and other health professionals, whose clinical practice, research specialization, or professional expertise include a significant focus on mammography and individuals identified with consumer interests. Prior experience on Federal public advisory committees in the same or similar subject areas will also be considered relevant professional expertise.

      The particular needs at this time for this committee are listed in section I of this document. The term of office is up to 4 years, depending on the appointment date.

   3. Device Good Manufacturing Practice Advisory Committee

      Persons nominated for membership as a health professional or officer or employee of any Federal, State, or local government should have knowledge of or expertise in any one or more of the following areas: Quality assurance concerning the design, manufacture, and use of medical devices. To be eligible for selection as a representative of the general public, nominees should possess appropriate qualifications to understand and contribute to the committee's work. The particular needs at this time for this committee are listed in section I of this document. The term of office is up to 4 years, depending on the appointment date.

   4. Technical Electronic Product Radiation Safety Standards Committee

      Persons nominated should be technically qualified by training and experience in one or more fields of science or engineering applicable to electronic product radiation safety. The particular needs at this time for this committee are listed in section I of this document. The term of office is up to 4 years, depending on the appointment date.

      Page 61143

4. Nomination Procedures

   Any interested person may nominate one or more qualified persons for membership on one or more of the advisory panels or advisory committees. Self-nominations are also accepted. Nominations will include complete curriculum vitae of each nominee, current business address and telephone number. Nominations will specify the advisory panel(s) or advisory committee(s) for which the nominee is recommended.

   Nominations will include confirmation that the nominee is aware of the nomination, is willing to serve as a member of the advisory committee if selected, and appears to have no conflict of interest that would preclude membership. Potential candidates will be required to provide detailed information concerning such matters as financial holdings, employment, and research grants and/or contracts to permit evaluation of possible sources of conflict of interest.

   This notice is issued under the Federal Advisory Committee Act (5

   U.S.C. app. 2) and 21 CFR part 14 relating to advisory committees.

   Dated: October 3, 2008.

   Randall W. Lutter,

   Deputy Commissioner for Policy.

   FR Doc. E8-24358 Filed 10-14-08; 8:45 am

   BILLING CODE 4160-01-S