Pesticides; tolerances in food, animal feeds, and raw agricultural commodities: Antimicrobial formulations,
[Federal Register: April 28, 2004 (Volume 69, Number 82)]
[Rules and Regulations]
[Page 23113-23142]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr28ap04-11]
[[Page 23113]]
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Parts 153, 168, and 180
[OPP-2003-0368; FRL-7335-4]
Pesticides; Tolerance Exemptions for Active and Inert Ingredients for Use in Antimicrobial Formulations (Food-Contact Surface Sanitizing Solutions)
AGENCY: Environmental Protection Agency (EPA).
ACTION: Final rule.
SUMMARY: EPA is adding a new section to part 180 to list the pesticide chemicals that are exempt from the requirement of a tolerance when used in food-contact surface sanitizing solutions. This list of exempt pesticide chemicals is duplicated from the Food and Drug Administration's (FDA) regulations in 21 CFR 178.1010. For some of these chemical substances, EPA's list will use naming conventions differing from those used by FDA. Additionally, EPA is redesignating/ reorganizing Sec. 180.1001. This section of CFR will be split into five separate sections with no changes in text or content.
DATES: This final rule is effective on April 28, 2004.
ADDRESSES: EPA has established a docket for this action under Docket ID number OPP-2003-0368 All documents in the docket are listed in the EDOCKET index at http://www.epa.gov/edocket. Although listed in the
index, some information is not publicly available, i.e., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, is not placed on the Internet and will be publicly available only in hard copy form. Publicly available docket materials are available either electronically in EDOCKET or in hard copy at the Public Information and Records Integrity Branch (PIRIB), Rm. 119, Crystal Mall 2, 1921 Jefferson Davis Hwy., Arlington, VA., Monday through Friday, excluding legal holidays. The Docket telephone number is (703) 305-5805.
FOR FURTHER INFORMATION CONTACT: Kathryn Boyle, Registration Division (7505C), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (703) 305-6304; fax number: (703) 305-0599; e-mail address: boyle.kathryn@epa.gov.
SUPPLEMENTARY INFORMATION:
-
General Information
A. Does This Action Apply to Me?
You may be potentially affected by this action if you formulate or market pesticide products. Potentially affected categories and entities may include, but are not limited to:
Food manufacturing (NAICS 311)
Antimicrobial pesticides (NAICS 32561)
This listing is not intended to be exhaustive, but rather provides a guide for readers regarding entities likely to be affected by this action. Other types of entities not listed in this unit could also be affected. The North American Industrial Classification System (NAICS) codes have been provided to assist you and others in determining whether this action might apply to certain entities. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.
B. How Can I Access Copies Of this Document and Other Related Information?
In addition to using EDOCKET (http://www.epa.gov/edocket/, you may
access this Federal Register document electronically through the EPA Internet under the ``Federal Register'' listings at http://www.epa.gov/fedrgstr/. A frequently updated electronic version of 40 CFR part 180
is available at E-CFR Beta Site Two at http://www.gpoaccess.gov/ecfr/.
-
What is the Agency's Authority for Taking this Action?
This final rule is issued under the Federal Food, Drug and Cosmetic Act (FFDCA) section 408, 21 U.S.C. 346a, as amended by the Food Quality Protection Act (FQPA) (Public Law 104-170), and the Antimicrobial Regulation Technical Correction Act (ARTCA) (Public Law 105-324).
Section 408 of FFDCA authorizes the establishment of tolerances, exemptions from the requirement of a tolerance, modifications in tolerances, and revocation of tolerances for residues of pesticide chemicals in or on raw agricultural commodities and processed foods. Owing to the FQPA and ARTCA amendments to FFDCA, certain chemical substances originally regulated by FDA under FFDCA section 409 as food- contact surface sanitizing solutions are now subject to EPA's authority under FFDCA section 408. Section 408(j)(2) of FFDCA provides that all regulations issued by FDA under FFDCA section 409 that stated conditions for safe use of substances that are now, post-FQPA, considered pesticide chemical residues in or on processed food or that otherwise stated the conditions under which such pesticide chemicals could be safely used, shall be deemed to be regulations issued under FFDCA section 408.
These pesticide chemical regulations are now subject to modification or revocation at EPA's initiative under FFDCA section 408(e). Today's rule duplicates the substance of FDA's food additive regulations for those chemical substances found in 21 CFR 178.1010 which are now pesticide chemicals, by codifying tolerance exemptions in a format consistent with EPA's authority under section 408 in a new section, 40 CFR 180.940.
Because some solutions described in 21 CFR 178.1010 may still have uses as food additives, FDA is leaving 21 CFR 178.1010 in effect. EPA's rulemaking activity has no effect on any of the FDA-regulated FFDCA section 409 food additive regulations in 21 CFR 178.1010.
-
Impact on Tolerance Reassessment
This rule shifts existing tolerance exemptions from 21 CFR 178.1010 to 40 CFR 180.940. These are duplicated from existing, valid FFDCA section 408 regulations. FDA promulgated the food additive regulations in 21 CFR 178.1010 under the authority of FFDCA section 409 prior to the enactment of FQPA. Those portions of 21 CFR 178.1010 that pertain to chemical substances that are pesticide chemicals post-FQPA and remain as such post-ARTCA were converted by FFDCA section 408(j)(2) into FFDCA section 408 tolerance exemptions. Thus, EPA's duplication of these tolerance exemptions is not ``establishing, modifying, or revoking a tolerance'' under FFDCA section 408(b). EPA is not, therefore, required to conduct a full reassessment of these tolerance exemptions at this time. However, because the tolerance exemptions duplicated from 21 CFR 178.1010 into 40 CFR 180.940 were in effect prior to the enactment of FQPA, they are subject to the tolerance reassessment deadline of August 2, 2006.
-
Background
In the Federal Register of December 3, 2002 (67 FR 71847) (FRL- 6824-2), the Agency published a direct final rule to establish 40 CFR 180.940. Comments were received. In the December 3, 2002 FR final rule, EPA had announced that it would withdraw the direct final rule if it received adverse comment, and proceed with proposed rule as provided by section 553 of the Administrative
[[Page 23114]]
Procedure Act, 5 U.S.C. 553. Because some of the comments were of a nature that would warrant a response if made on a proposed rule, they were adverse comments that required withdrawal of the direct final rule. EPA withdrew the direct final rule on March 24, 2003 (68 FR 14165)(FRL-7299-4).
In the Federal Register of June 25, 2003 (68 FR 37778) (FRL-7302- 2), the Agency issued its proposal to establish 40 CFR 180.940. The comments received as a result of the December 3, 2002, direct final rule were addressed in that proposed rule.
Six comments were received in response to the June 25\th\ proposed rule. There was also a late comment to the direct final rule.
One commenter requested to increase the concentrations of certain chemical ingredients. At this time, EPA is not proposing to change the upper concentration limits as specified by FDA in 21 CFR 178.1010. The purpose of this final rule action is to duplicate FDA's previous clearances in a format consistent with EPA's authority under section 408. To increase the concentration limitations from those specified by FDA, requires the performance of a risk assessment. At this time EPA is merely duplicating the listing of chemicals in 21 CFR 178.1010 to 40 CFR 180.940, albeit in a different format. EPA is required under section 408(q)(1)(C) to complete tolerance reassessment for all pesticide chemicals by 2006, and will consider the commenter's suggestion during tolerance reassessment.
The same commenter requested that all GRAS ingredients listed under 21 CFR part 184 be included in 180.940. Another commenter requested that all chemical substances designated as GRAS in 21 CFR part 582 be included in 40 CFR 180.940 under a catch-all provision. The Agency understands that 21 CFR 178.1010 allows the inclusion of GRAS chemical substances and chemical substances ``permitted by prior sanction or approval,'' that are not expressly identified in 21 CFR 178.1010. It is for this reason that the Agency asked registrants of food-contact surface sanitizing solutions to specifically identify all other ingredients that they believe should be included in 40 CFR 180.940. At a later date, EPA intends to publish its proposal to revise 40 CFR 180.940 by adding chemical substances that were not specified by name in 21 CFR 178.1010 but that are included in a registered food-contact surface sanitizing solution. Today's final rule only considers the chemical substances that were specified by name in 21 CFR 178.1010.
One commenter expressed concern that documenting all of FDA's informal clearances could prove to be difficult. They stated that the existence of a registration should be sufficient proof. The Agency agrees. In fact, several registrants of various food-contact surface sanitizing solutions have already supplied the Agency with a list of chemical substances that were not included in the proposed 40 CFR 180.940, but are part of a registered pesticide product. The claims for inclusion of these chemical substances were documented only by reference to an EPA Registration Number. Where EPA's files clearly demonstrate both that the registered pesticide was subject to section 409 and contained the chemical substance before enactment of the FQPA, EPA will include the chemical substance in the upcoming proposal to revise 40 CFR 180.940. So although identifying a registered pesticide as containing a particular chemical substance may be sufficient to support inclusion in 40 CFR 180.940, registrants can maximize the likelihood of inclusion by providing documentation of FDA's prior sanction or approval.
Two commenters requested confirmation on whether or not chemical substances that are included in an existing, registered food-contact surface sanitizing solution, but are not included by name in 21 CFR 178.1010, are considered under this final rule to be FDA-approved substances. Today's final rule does not address such chemical substances. In the preambles to both the direct final rule and the proposed rule, EPA asked registrants of food-contact surface sanitizing solutions to identify to EPA any chemical substances that they claim have been cleared by FDA for use in sanitizing solutions but not expressly identified in 21 CFR 178.1010. As previously stated, at some time in the near future, EPA intends to publish its proposal to revise 40 CFR 180.940 to add chemical substances that were not specified by name in 21 CFR 178.1010. In order to preserve the use of registered food-contact surface sanitizing solutions whose ingredients were cleared by FDA before FQPA's enactment, EPA will treat all of the component chemicals (whether or not they are specifically identified in 21 CFR 178.1010) of registered food-contact surface sanitizing solutions as exempt from the requirement of a tolerance until EPA has completed its review of the registrants' claims with respect to pesticide chemicals not specifically identified in 21 CFR 178.1010.
The same two commenters also stated that EPA should not distinguish between the three categories of food-contact surface sanitizing solutions. They believe that these categories have not been rigidly applied. Today's final rule addresses only those use patterns as specifically described in 21 CFR 178.1010. If a registrant supplies information to the Agency to demonstrate that FDA cleared a solution for uses broader than described in Sec. 178.1010, then EPA can include these changes in its upcoming proposal to revise 40 CFR 180.940. However, today's regulation merely duplicates the substance of the existing FDA regulation.
The late comment (to the direct final rule) requested that all of the quaternary sanitizer solutions currently listed under 21 CFR 178.1010 be approved by EPA for end use at a concentration not to exceed 400 ppm of the active quaternary compound. The rationale for such a change included a statement that FDA had intended to make such a change and a discussion of the concerns of public health officials who advocate for solutions with demonstrated efficacy over a wide range of concentrations. Such a range would provide the user ``a reasonable margin of error'' while preparing safe and effective sanitizing solutions.
In a similar manner, another commenter indicated its belief that the proposed language for the quaternary ammonium compounds was inconsistent with the existing FDA regulations. According to the commenter FDA had established a total limit of 400 ppm for the quaternary ammonium compounds, while EPA's approach could possibly allow up to 750 ppm. EPA discussed this issue with FDA, and concluded that the comments have merit, not only for the quaternary ammonium compounds, but also for other chemicals that were expressed as total or solution limits. This would include the halogens (chloride-, bromide-, and iodide-producing chemicals) and napthalene sulfonate derivatives. Since the concentration limits for the above chemicals are specified in 21 CFR 178.1010 as total or solution limits, this change has been carried forward to 40 CFR 180.940.
One of the commenters submitted a letter from FDA which seemed to indicate that FDA had raised the maximum at-use concentration of certain chemicals from 200 ppm to 220 ppm. This comment was also discussed with FDA who indicated that while they had ``no objection'' to 220 ppm as the at-use concentration, they intended that the tolerance for residues in or on food should remain at 200 ppm. FDA would continue to have no objection to use
[[Page 23115]]
levels as high as 220 as indicated through field testing.
While not in response to a comment, the Agency is making several changes to the list of chemical substances proposed in the June 25\th\ proposed rule. Several of the chemical substances (citric acid, dextrin, magnesium oxide, sodium bicarbonate, starch and octadecanoic acid, calcium salt) have been recently classified as List 4A minimal risk inert ingredients (see the listings of inert ingredients at http://www.epa.gov/opprd001/inerts/lists.html ). Tolerance exemptions for
certain of these List 4A substances (citric acid, dextrins, and starch (as a food commodity)) have already been established in 40 CFR 180.950, the section of CFR that holds ``Tolerance Exemptions for Minimal Risk Active and Inert Ingredients.'' Because chemical substances with a tolerance exemption identified in 40 CFR 180.950 may be used in any pesticide product, including antimicrobial products, without limitation, having tolerance exemptions in both 40 CFR 180.940 and 180.950 would be redundant. Therefore, duplicative entries for citric acid, dextrin, and starch are not created today in 40 CFR 180.940. Additionally, because the Agency intends that all List 4A substances eventually will be transferred to 40 CFR 180.950 without limitations, the Agency is removing the concentration use limitations for sodium bicarbonate, magnesium oxide and octadecanoic acid, calcium salt.
Based on the reasons set forth in the preamble to the proposed rule, and considering the comments received by the Agency in response to the direct final and proposed rules, EPA is creating a new section 40 CFR 180.940.
Redesignation of 40 CFR 180.1001
In the July 1, 2002 edition of title 40 CFR parts 150 to 189, Sec. 180.1001 occupies pages 508 to 537, a large amount of information for one section of CFR. Today's action shifts and splits 40 CFR 180.1001 with no changes to the text or content. See Table 1 for a redesignation of the paragraphs and the new sections.
Table 1.--Redesignation of 40 CFR 180.1001
Former CFR Designation
New CFR Designation
180.1001(a)
180.1001(b)
180.1001(c)
180.1001(d)
180.1001(e)
All references to 40 CFR 180.1001 in other sections of 40 CFR are also being changed to reflect the shift. Additionally two FDA regulations cite to 180.1001: 21 CFR 182.99 and 582.99. FDA is aware that this shift of 40 CFR 180.1001 is occurring.
-
Objections and Hearing Requests
Under section 408(g) of the FFDCA, as amended by the FQPA, any person may file an objection to any aspect of this regulation and may also request a hearing on those objections. The EPA procedural regulations which govern the submission of objections and requests for hearings appear in 40 CFR part 178. Although the procedures in those regulations require some modification to reflect the amendments made to the FFDCA by the FQPA of 1996, EPA will continue to use those procedures, with appropriate adjustments, until the necessary modifications can be made. The new section 408(g) provides essentially the same process for persons to ``object'' to a regulation for an exemption from the requirement of a tolerance issued by EPA under new section 408(d), as was provided in the old FFDCA sections 408 and 409. However, the period for filing objections is now 60 days, rather than 30 days.
A. What Do I Need to Do to File an Objection or Request a Hearing?
You must file your objection or request a hearing on this regulation in accordance with the instructions provided in this unit and in 40 CFR part 178. To ensure proper receipt by EPA, you must identify docket ID number OPP-2003-0368 in the subject line on the first page of your submission. All requests must be in writing, and must be mailed or delivered to the Hearing Clerk on or before June 28, 2004.
1. Filing the request. Your objection must specify the specific provisions in the regulation that you object to, and the grounds for the objections (40 CFR 178.25). If a hearing is requested, the objections must include a statement of the factual issues(s) on which a hearing is requested, the requestor's contentions on such issues, and a summary of any evidence relied upon by the objector (40 CFR 178.27). Information submitted in connection with an objection or hearing request may be claimed confidential by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. A copy of the information that does not contain CBI must be submitted for inclusion in the public record. Information not marked confidential may be disclosed publicly by EPA without prior notice.
Mail your written request to: Office of the Hearing Clerk (1900C), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001. You may also deliver your request to the Office of the Hearing Clerk in Rm.104, Crystal Mall 2, 1921 Jefferson Davis Hwy., Arlington, VA. The Office of the Hearing Clerk is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the Office of the Hearing Clerk is (703) 603-0061.
2. Tolerance fee payment. If you file an objection or request a hearing, you must also pay the fee prescribed by 40 CFR 180.33(i) or request a waiver of that fee pursuant to 40 CFR 180.33(m). You must mail the fee to: EPA Headquarters Accounting Operations Branch, Office of Pesticide Programs, P.O. Box 360277M, Pittsburgh, PA 15251. Please identify the fee submission by labeling it ``Tolerance Petition Fees.''
EPA is authorized to waive any fee requirement ``when in the judgement of the Administrator such a waiver or refund is equitable and not contrary to the purpose of this subsection.'' For additional information regarding the waiver of these fees, you may contact James Tompkins by phone at (703) 305-5697, by e-mail at tompkins.jim@epa.gov, or by mailing a request for information to Mr. Tompkins at Registration Division (7505C), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460- 0001.
If you would like to request a waiver of the tolerance objection fees, you must mail your request for such a waiver to: James Hollins, Information Resources and Services Division (7502C), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
3. Copies for the Docket. In addition to filing an objection or hearing request with the Hearing Clerk as described in Unit V.A., you should also send a copy of your request to the PIRIB for its inclusion in the official record that is described in ADDRESSES. Mail your copies, identified by docket ID number OPP-2003-0368, to: Public Information
[[Page 23116]]
and Records Integrity Branch, Information Resources and Services Division (7502C), Office of Pesticide Programs, Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460. In person or by courier, bring a copy to the location of the PIRIB described in ADDRESSES. You may also send an electronic copy of your request via e-mail to: opp-docket@epa.gov. Please use an ASCII file format and avoid the use of special characters and any form of encryption. Copies of electronic objections and hearing requests will also be accepted on disks in WordPerfect 6.1/8.0 or ASCII file format. Do not include any CBI in your electronic copy. You may also submit an electronic copy of your request at many Federal Depository Libraries.
B. When Will the Agency Grant a Request for a Hearing?
A request for a hearing will be granted if the Administrator determines that the material submitted shows the following: There is a genuine and substantial issue of fact; there is a reasonable possibility that available evidence identified by the requestor would, if established resolve one or more of such issues in favor of the requestor, taking into account uncontested claims or facts to the contrary; and resolution of the factual issues(s) in the manner sought by the requestor would be adequate to justify the action requested (40 CFR 178.32).
-
Statutory and Executive Order Reviews
This final rule reorganizes the existing exemptions in 40 CFR 180.1001, shifting them from one section to another within the same part. The Agency is acting on its own initiative under FFDCA section 408(e) in shifting these existing tolerance exemptions to a new section of part 180. This has no substantive effect, and is not expected to have any adverse impact, or otherwise impose any new requirements.
This final rule also establishes a new section, 40 CFR 180.940, ``Tolerance Exemptions for Active and Inert Ingredients for Use in Antimicrobial Formulations (Food-Contact Surface Sanitizing Solutions).'' As discussed in Unit II., this new section merely duplicates that portion of the existing FDA regulation 21 CFR 178.1010 that applies to chemical substances that are now subject to EPA's authority under FFDCA section 408.
The Office of Management and Budget (OMB) has exempted these types of actions from review under Executive Order 12866, entitled Regulatory Planning and Review (58 FR 51735, October 4, 1993). Because this rule has been exempted from review under Executive Order 12866 due to its lack of significance, this rule is not subject to Executive Order 13211, Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution, or Use (66 FR 28355, May 22, 2001). This final rule does not contain any information collections subject to OMB approval under the Paperwork Reduction Act (PRA), 44 U.S.C. 3501 et seq., or impose any enforceable duty or contain any unfunded mandate as described under Title II of the Unfunded Mandates Reform Act of 1995 (UMRA) (Public Law 104-4). Nor does it require any special considerations under Executive Order 12898, entitled Federal Actions to Address Environmental Justice in Minority Populations and Low-Income Populations (59 FR 7629, February 16, 1994); or OMB review or any Agency action under Executive Order 13045, entitled Protection of Children from Environmental Health Risks and Safety Risks (62 FR 19885, April 23, 1997). This action does not involve any technical standards that would require Agency consideration of voluntary consensus standards pursuant to section 12(d) of the National Technology Transfer and Advancement Act of 1995 (NTTAA), Public Law 104-113, section 12(d) (15 U.S.C. 272 note).
Under section 605(b) of the Regulatory Flexibility Act (RFA) (5 U.S.C. 601 et seq.), the Agency hereby certifies that the proposed action to reorganize 40 CFR 180.1001 will not have significant negative economic impact on a substantial number of small entities. Creation of a new section and the reorganization of 40 CFR 180.1001 does not have a substantive effect and hence causes no impact. In addition, the Agency has determined that this action will not have a substantial direct effect on States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government, as specified in Executive Order 13132, entitled Federalism(64 FR 43255, August 10, 1999). Executive Order 13132 requires EPA to develop an accountable process to ensure ``meaningful and timely input by State and local officials in the development of regulatory policies that have federalism implications.'' ``Policies that have federalism implications'' is defined in the Executive order to include regulations that have ``substantial direct effects on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.'' This final rule directly regulates growers, food processors, food handlers and food retailers, not States. This action does not alter the relationships or distribution of power and responsibilities established by Congress in the preemption provisions of FFDCA section 408(n)(4). For these same reasons, the Agency has determined that this rule does not have any ``tribal implications'' as described in Executive Order 13175, entitled Consultation and Coordination with Indian Tribal Governments (65 FR 67249, November 6, 2000). Executive Order 13175, requires EPA to develop an accountable process to ensure ``meaningful and timely input by tribal officials in the development of regulatory policies that have tribal implications.'' ``Policies that have tribal implications'' is defined in the Executive order to include regulations that have ``substantial direct effects on one or more Indian tribes, on the relationship between the Federal Government and the Indian tribes, or on the distribution of power and responsibilities between the Federal Government and Indian tribes.'' This rule will not have substantial direct effects on tribal governments, on the relationship between the Federal Government and Indian tribes, or on the distribution of power and responsibilities between the Federal Government and Indian tribes, as specified in Executive Order 13175. Thus, Executive Order 13175 does not apply to this rule.
-
Congressional Review Act
The Congressional Review Act, 5 U.S.C. 801 et seq., as added by the Small Business Regulatory Enforcement Fairness Act of 1996, generally provides that before a rule may take effect, the Agency promulgating the rule must submit a rule report, which includes a copy of the rule, to each House of the Congress and the Comptroller General of the United States. EPA will submit a report containing this rule and other required information to the U.S. Senate, the U.S. House of Representatives, and the Comptroller General of the United States prior to publication of the rule in the Federal Register. This rule is not a ``major rule'' as defined by 5 U.S.C. 804(2).
List of Subjects in 40 CFR Parts 153, 168, and 180
Environmental protection, Administrative practice and procedure, Advertising, Agricultual commodities,
[[Page 23117]]
Exports, Labeling, Pesticides and pests, Reporting and recordkeeping requirements.
Dated: April 21, 2004. James Jones, Director, Office of Pesticide Programs.
Therefore, 40 CFR chapter I is amended as follows:
PART 153--[AMENDED]
0 1. The authority citation for part 153 continues to read as follows:
Authority: 15 U.S.C. 136 et seq.
0 2. Sections 153.155 is amended by revising paragraph (c)(1) to read as follows:
Sec. 153.155 Seed treatment products.
* * * * *
(c) * * *
(1) Sections 180.910, 180.920, and 180.950 if an exemption from the requirement of a tolerance has been established. * * * * *
PART 168--[AMENDED]
0 3. The authority citation for part 168 continues to read as follows:
Authority: 15 U.S.C. 136 et seq.
0 4. Section 168.65 is amended by revising the first sentence of paragraph (b)(1)(iii)(A)(2)(i), and by revising paragraph (b)(1)(iii)(A)(2)(ii) to read as follows:
Sec. 168.65 Pesticide export label and labeling requirements.
* * * * *
(b) * * *
(1) * * *
(iii) * * *
(A) * * *
(2) * * *
(i) The change in color must result only from the addition of a dye included on the list of the chemicals exempted from the requirement of a tolerance at 40 CFR 180.910, 180.920, 180.930, and 180.950, and the dye must not be a List 1 inert. * * *
(ii) The change in fragrance must result only from the addition of a chemical included on the list of the chemicals exempted from the requirement of a tolerance at 40 CFR 180.910, 180.920, 180.930, and 180.950, and the chemical must not be a List 1 inert. * * * * *
0 5. Section 168.75 is amended by revising the second and fifth sentences of paragraph (b)(4)(iii) to read as follows:
Sec. 168.75 Procedures for exporting unregistered pesticide-purchase acknowledgment statements.
* * * * *
(b) * * *
(4) * * *
(iii) * * * The change in color must result only from the addition of a dye included on the list of the chemicals exempted from the requirement of a tolerance at 40 CFR 180.910, 180.920, 180.930, and 180.950, and the dye must not be a List 1 inert. * * * The change in fragrance must result only from the addition of a chemical included on the list of the chemicals exempted from the requirement of a tolerance at 40 CFR 180.910, 180.920, 180.930, and 180.950, and the chemical must not be a List 1 inert. * * * * * * * *
PART 180--[AMENDED]
0 6. The authority citation for part 180 continues to read as follows:
Authority: 21 U.S.C. 321(q), 346a and 371.
0 7. Section 180.900 is added to subpart D to read as follows:
Sec. 180.900 Exemptions from the requirement of a tolerance.
An exemption from a tolerance shall be granted when it appears that the total quantity of the pesticide chemical in or on all raw agricultural commodities for which it is useful under conditions of use currently prevailing or proposed will involve no hazard to the public health.
0 8. Section 180.905 is added to subpart D to read as follows:
Sec. 180.905 Pesticide chemicals; exemptions from the requirement of a tolerance.
(a) When applied to growing crops, in accordance with good agricultural practice, the following pesticide chemicals are exempt from the requirement of a tolerance:
(1) [Reserved]
(2) N-Octylbicyclo(2,2,1)-5-heptene-2,3-dicarboximide.
(3) Petroleum oils.
(4) Piperonyl butoxide.
(5) [Reserved]
(6) Pyrethrum and pyrethrins.
(7) Rotenone or derris or cube roots.
(8) Sabadilla.
(b) These pesticides are not exempted from the requirement of a tolerance when applied to a crop at the time of or after harvest.
0 9. Section 180.910 is added to subpart D to read as follows:
Sec. 180.910 Inert ingredients used pre- and post-harvest; exemptions from the requirement of a tolerance.
Residues of the following materials are exempted from the requirement of a tolerance when used in accordance with good agricultural practice as inert (or occasionally active) ingredients in pesticide formulations applied to growing crops or to raw agricultural commodities after harvest:
Inert ingredients
Limits
Uses
Acetic acid.................. ................ Catalyst Acetic anhydride............. ................ Solvent, cosolvent Acetone...................... ................ Do. Alkanoic and alkenoic acids, ................ Emulsifiers mono- and diesters of [alpha]-hydro-[omega]- hydroxypoly (oxyethylene) with molecular weight (in amu) range of 200 to 6,000. Alkyl (C8-C24)
................ Surfactants, related benzenesulfonic acid and its
adjuvants of ammonium, calcium,
surfactants magnesium, potassium, sodium, and zinc salts.
[alpha] -Alkyl (C9-C18-[omega]- ................ Solvent, cosolvent, hydroxypoly(oxyethylene)
surfactant, and with poly(oxyethylene)
related adjuvants of content of 2-30 moles.
surfactants
[alpha] -(p-Alkylphenyl)- ................ Surfactants, related [omega]-
adjuvants of hydroxypoly(oxyethylene)
surfactants produced by the condensation of 1 mole of alkylphenol (alkyl is a mixture of propylene tetramer and pentamer isomers and averages C13) with 6 moles of ethylene oxide.
[[Page 23118]]
[alpha] -Alkyl (C6-C14)-
................ Do. [omega]- hydroxypoly(oxypropylene) block copolymer with polyoxyethylene; polyoxypropylene content is 1-3 moles; polyoxyethylene content is 4-12 moles; average molecular weight (in amu) is approximately 635.
[agr] -alkyl (C12-C15)-[omega]- Not more than Surfactant hydroxypoly (oxypropylene) 20% of poly (oxyethylene)
pesticide copolymers (where the poly formulations (oxypropylene) content is 3- 60 moles and the poly (oxyethylene) content is 5- 80 moles). Alkyl (C8-C18) sulfate and ................ Surfactants. its ammonium, calcium, isopropylamine, magnesium, potassium, sodium, and zinc salts. Aluminum hydroxide........... ................ Diluent, carrier Aluminum oxide............... ................ Diluent Aluminum stearate............ ................ Surfactant Ammonium bicarbonate......... ................ Surfactant, suspending agent, dispersing agent Ammonium carbamate........... ................ Synergist in aluminum phosphide formulations Ammonium chloride............ ................ Intensifier when used with ammonium nitrate as a dessicant or defoliant. Fire suppressant in aluminum phosphide and magnesium phosphide formulations Ammonium hydroxide........... ................ Solvent, cosolvent, neutralizer, solubilizing agent Ammonium stearate............ ................ Surfactant Ammonium sulfate............. ................ Solid diluent, carrier Ammonium thiosulfate......... ................ Intensifier when used with ammonium nitrate as desiccant or defoliant Amyl acetate................. ................ Solvent, cosolvent, attractant Ascorbic acid (CAS Reg. No. ................ Stabilizer, 50-81-7).
preservative Ascorbyl palmitate........... ................ Preservative Attapulgite-type clay........ ................ Solid diluent, carrier, thickener Bacillus thuringiensis
................ Diluent, carrier fermentation solids and/or solubles. Beeswax...................... ................ Coating agent Bentonite.................... ................ Solid diluent, carrier Benzoic acid................. ................ Preservative for formulation Butane....................... ................ Propellant n-Butanol (CAS Reg. No. 71-36- ................ Solvent, cosolvent 3). Butylated hydroxyanisole..... ................ Antioxidant Butylated hydroxytoluene..... ................ Do.
[alpha] -(p-tert-Butylphenyl)- ................ Surfactants related [omega]-hydroxypoly
adjuvants of (oxyethylene) mixture of
surfactants dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the poly(oxyethylene) content averages 4-12 moles. Calcareous shale............. ................ Solid diluent carrier Calcite...................... ................ Do. Calcium carbonate............ ................ Do. Calcium chloride............. ................ Stabilizer Calcium phosphate............ ................ Solid diluent, carrier Calcium hydroxide............ ................ Do. Calcium hypochlorite......... ................ Sanitizing and bleaching agent Calcium oxide................ ................ Solid diluent, carrier Calcium salt of partially ................ Coating agent dimerized rosin, conforming to 21 CFR 172.210. Calcium silicate............. ................ Solid diluent, carrier Calcium stearate............. ................ Do. Carnauba wax................. ................ Coating agent Carrageenan, conforming to 21 Minimum
Thickener CFR 172.620.
molecular weight (in amu): 100,000. Casein....................... Expires May 24, Surfactant, emulsifier, 2005..
wetting agent Cetyl alcohol (CAS Reg. No. Not more than Evaporation retardant 36653-82-4).
5.0% of pesticide formulation. Charcoal, activated.......... Meets
Carrier specifications in the Food Chemical Codex. Coconut shells............... ................ Solid diluent and carrier Cod liver oil................ ................ Solvent, cosolvent Coumarone--indene resin, For use on
Component of coating conforming to 21 CFR 172.215. citrus only. agent Croscarmellose sodium (CAS ................ Disintegrant, solid Reg. No. 74811-65-7).
diluent, carrier, and thickener Diacetyl tartaric acid esters ................ Emulsifier of mono- and diglycerides of edible fatty acids.
[[Page 23119]]
Dialkyl (C8-C18) dimethyl Not more than Flocculating agent in ammonium chloride.
0.2% in silica, the manufacture of hydrated silica. silica, hydrated silica for use as a solid diluent, carrier Diatomite (diatomaceous
................ Solid diluent carrier earth). Dichlorodifluoromethane...... ................ Propellant Dichlorotetrafluoroethane.... ................ Do. Diethylene glycol abietate... ................ Surfactants, related adjuvants of surfactants 1,1-Difluoroethane (CAS Reg. For aerosol Aerosol propellant No. 75-37-6).
pesticide formulations used for insect control in food- and feed- handling establishments and animals. 1,2-Dihydro-6-ethoxy-2,2,4- Not more than Antioxidant trimethylquinolene.
0.02% of pesticide formulation. 3,6-Dimethyl-4-octyn-3,6-diol Not more than Surfactants, related 2.5% of
adjuvants of pesticide
surfactants formulation.
[alpha] -(o,p-Dinonylphenyl)- ................ Surfactants, related [omega]-hydroxypoly
adjuvants of (oxyethylene) mixture of
surfactants dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 moles.
[alpha] -(o,p-Dinonylphenyl)- ................ Do. [omega]-hydroxypoly (oxyethylene) produced by condensation of 1 mole of dinonylphenol (nonyl group is a propylene trimer isomer) with an average of 4- 14 or 140-160 moles of ethylene oxide. Dipropylene glycol........... ................ Solvent, cosolvent Disodium phosphate........... ................ Anticaking agent, conditioning agent Disodium zinc
................ Sequestrant ethylenediaminetetraacetate dihydride. Dodecylbenzenesulfonic acid, ................ Release rate regulator amine salts.
in pheromone formulation
[alpha] -(p-Dodecylphenyl)- ................ Surfactants, related, [omega]-hydroxypoly
adjuvants of (oxyethylene) produced by
surfactants the condensation of 1 mole of dodecylphenol (dodecyl group is a propylene tetramer isomer) with an average of 4-14 or 30-70 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4- 14 or 30-70. Dolomite..................... ................ Solid diluent, carrier Epoxidized linseed oil....... ................ Surfactants, related adjuvants of surfactants Epoxidized soybean oil....... ................ Do. Ethoxylated lignosulfonic ................ Surfactant acid, sodium salt. Ethyl acetate................ ................ Solvent, cosolvent Ethyl alcohol................ ................ Do. Ethyl esters of fatty acids ................ Solvent, cosolvent derived from edible fats and oils. Ethylene methylphenyglycidate ................ Synthetic flavoring Ethylene oxide adducts of ................ Surfactants, related 2,4,7,9-tetramethyl-5-
adjuvants of decynediol, the ethylene
surfactants oxide content averages 3.5, 10, or 30 moles. Ethylenediaminetetraacetic 3% of pesticide Sequestrant acid.
formulation. Ethylenediaminetetraacetic 5% of pesticide Sequestrant acid, tetrasodium salt.
formulation. 2-Ethyl-1-hexanol............ Not more than Solvent, adjuvant of 2.5% of
surfactants pesticide formulation. Fatty acids, conforming to 21 ................ Binder, defoaming CFR 172.860.
agent, lubricant FD&C Blue No. 1.............. Not more than Dye 0.2% of pesticide formulation. FD&C Red No. 40 (CAS Reg. No. Not to exceed Dye, coloring agent 25956-17-6) conforming to 21 0.002% by CFR 74.340.
weight of pesticide formulation. Ferric sulfate............... ................ Solid diluent, carrier Fish meal.................... Expires May 24, Solid diluent, carrier 2005.. Furcelleran.................. ................ Thickener Glycerides, edible fats and ................ Emulsifier, dispersing oils derived from plants and
agent animals, reaction products with sucrose (CAS Reg. Nos. 100403-38-1, 100403-41-6, 100403-39-2, 100403-40-5). Glycerol..................... ................ Thickener Glycerol mono-, di-, and ................ Solvent, cosolvent triacetate. Glyceryl monostearate........ ................ Emulsifier Granite...................... ................ Do. Graphite..................... ................ Solid diluent, carrier
[[Page 23120]]
Gum arabic (acacia).......... ................ Surfactant, suspending agent, dispersing agent Gypsum....................... ................ Solid diluent, carrier Hexamethylenetetramine....... For use in
Preservative citrus washing solutions only at not more than 1%. n-Hexyl alcohol (CAS Reg. No. ................ Solvent, cosolvent 111-27-3). Humic acid, sodium salt (CAS ................ Adjuvant, UV Reg. No. 68131-04-4).
protectant. Hydrochloric acid............ ................ Solvent, neutralizer Hydroxyethylidine
For use in
Stabilizer, chelator diphosphonic acid (HEDP) antimicrobial (CAS Reg. No. 2809-21-4). pesticide formulations at not more than 1 percent. Iron oxide................... ................ Solid diluent, carrier Isopropyl alcohol............ ................ Solvent, cosolvent, stabilizer, inhibitor Isopropyl myristate, CAS Reg. ................ Solvent No. 110-27-0. Kaolinite-type clay.......... ................ Solid diluent, carrier Lactic acid.................. ................ Solvent Lauryl alcohol............... ................ Surfactant
[alpha] -Lauryl-[omega]-
................ Emulsifier hydroxypoly(oxyethylene), average molecular weight (in amu) of 600.
[alpha] -Lauryl-[omega]-
................ Surfactants, related hydroxypoly(oxyethylene)
adjuvants of sulfate, sodium salt; the
surfactants poly(oxyethylene) content is 3-4 moles. Lignosulfonate, ammonium, ................ Surfactants, related calcium, magnesium,
adjuvants of potassium, sodium, and zinc
surfactants salts. d-Limonene (CAS Reg. No. 5989- ................ Solvent, fragrance 27-5). Magnesium carbonate.......... ................ Anticaking agent, conditioning agent Magnesium chloride........... ................ Safener Magnesium lime............... ................ Solid diluent, carrier Magnesium oxide.............. ................ Do. Magnesium silicate........... ................ Do. Magnesium stearate........... ................ Surfactant Magnesium sulfate............ ................ Solid diluent, carrier, safener Manganous oxide.............. ................ Solid diluent, carrier Methyl alcohol............... ................ Solvent Methyl n-amyl ketone (CAS ................ Solvent, cosolvent Reg. No. 110-43-0). Methylated silicones......... ................ Antifoaming agent Methyl esters of fatty acids ................ Solvent, cosolvent derived from edible fats and oils. Methyl esters of higher fatty ................ Antidusting agent, acids conforming to 21 CFR
surfactant 573.640. Methyl ester of rosin,
................ Surfactants, related partially hydrogenated (as
adjuvants of defined in 21 CFR 172.615).
surfactants Methyl isobutyl ketone....... ................ Solvent Mica......................... ................ Solid diluent, carrier Mineral oil, U.S.P., or
................ Diluent, carrier, and conforming to 21 CFR 172.878
solvent or 178.3620(a) (CAS Reg. No. 8012-95-1). Modified polyester resin For use on
Resinous coating derived from ethylene
citrus only. glycol, fumaric acid, and rosin. Monoammonium phosphate....... No more than Postharvest fumigation 3.75% by weight in formulation with in formulation. aluminum phosphide Mono- and diglycerides of C8- ................ Surfactants, related C18 fatty acids.
adjuvants of surfactants Montmorillonite-type clay.... ................ Solid diluent, carrier Montmorillonite-type clay PTFE content not Carrier treated with
greater than polytetrafluoroethylene
0.5% (w/w) of (PTFE; CAS Reg. No. 9002-84- clay. 0). Nonyl, decyl, and undecyl ................ Surfactant. glycoside mixture with a mixture of nonyl, decyl, and undecyl oligosaccharides and related reaction products (primarily decanol and undecanol) produced as an aqueous-based liquid (50 to 65% solids) from the reaction of primary alcohols (containing 15 to 20% secondary alcohol isomers) in a ratio of 20% C9, 40% C10, and 40% C11 with carbohydrates (average glucose to alkyl chain ratio 1.3 to 1.8).
[alpha] -(p-Nonylphenyl)- ................ Surfactants, related [omega]-
adjuvants of hydroxypoly(oxyethylene)
surfactants mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 moles or 30 moles.
[[Page 23121]]
[alpha] -(p-Nonylphenyl)- ................ Do. [omega]- hydroxypoly(oxyethylene) produced by the condensation of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-14 or 30-90 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4- 14 or 30-90.
[alpha] -(p-Nonylphenyl)- ................ Do. [omega]- hydroxypoly(oxyethylene) sulfate, ammonium, calcium, magnesium, potassium, sodium, and zinc salts; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4 moles. Octyl and decyl glucosides ................ Do. mixture with a mixture of octyl and decyloligosaccharides and related reaction products (primarily n- decanol) produced as an aqueous-based liquid (68-72% solids) from the reaction of straight chain alcohols (C8(45%), C10 (55%)) with anhydrous glucose. Oleic acid................... ................ Diluent Oleic acid diester of [alpha]- ................ Surfactants, related hydro-[omega]-hydroxypoly
adjuvants of (oxyethylene); the
surfactants poly(oxyethylene) having average molecular weight (in amu) 400.
[alpha] -Oleoyl-[omega]-
................ Emulsifier hydroxypoly(oxyethylene), average molecular weight (in amu) of 600. Oleyl alcohol (CAS Reg. No. 15%............. Cosolvent 143-28-2. Oxalic acid.................. No more oxalic Calcium chelating hard acid should be water inhibitor used than is necessary to chelate calcium and in no case should more than 2 lb oxalic acid per acre be used. Oxidized pine lignin, sodium Maximum of 2% of Surfactant, related salt, (CAS Reg. No. 68201-23- formulation. adjuvant of surfactant 0). Palmitic acid................ ................ Diluent Pentaerythritol ester of ................ Plasticizer maleic anhydride modified wood rosin. Pentaerythritol ester of ................ Do. modified resin. Pentaerythritol stearates No more than 25 Emulsifier mixture (CAS Reg. No. 85116- ppm in 93-4) which include
pesticide pentaerythritol monostearate formulations. (CAS Reg. No. 78-23-9), pentaerythritol distearate (CAS Reg. No. 13081-97-5), pentaerythritol tristearate (CAS Reg. No. 28188-24-1) and pentaerythritol tetrastearate (CAS Reg. No. 115-83-3). Petrolatum, conforming to 21 ................ Coating agent CFR 172.880. Petroleum hydrocarbons, light ................ Solvent, diluent. odorless conforming to 21 CFR 172.884. Petroleum hydrocarbons,
................ Do. synthetic isoparaffinic, conforming to 21 CFR 172.882. Petroleum naphtha, conforming ................ Component of coating to 21 CFR 172.250(d).
agent Petroleum wax, conforming to ................ Coating agent 21 CFR 172.886(d). Phosphoric acid.............. ................ Buffer Phosphorus oxychloride....... ................ Catalyst Pine lignin.................. ................ Adsorbent B-Pinene polymers............ ................ Surfactants, related adjuvants of surfactants Polyethylene, conforming to ................ Binder, carrier, and 21 CFR 177.1520(c).
coating agent Polyethylene glycol[[alpha]- ................ Surfactants, related hydro-[omega]-
adjuvants of hydroxypoly(oxyethylene)];
surfactants mean molecular weight (in amu) 194 to 9,500 conforms to 21 CFR 178.3750. Polyglycerol esters of fatty ................ Surfactants, related acids conforming to 21 CFR
adjuvants of 172.854.
surfactants Polyglyceryl phthalate ester ................ Do. of coconut oil fatty acids. Poly(methylene-p-tert-
................ Coating agent butylphenoxy)- poly(oxyethylene) ethanol; the poly(oxyethylene) content averages 4-12 moles. Poly(methylene-p-
................ Coating agent nonylphenoxy)poly (oxyethylene) ethanol; the poly(oxyethylene) content averages 4-12 moles.
[[Page 23122]]
Poly(oxy-1,2-ethanediyl), ................ Surfactant [alpha]-(carboxymethyl)- [omega]-(nonylphenoxy) produced by the condensation of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-14 or 30-90 moles of ethylene oxide. The molecular weight (in amu) ranges are 454-894 and 1598- 4238. Polyoxyethylene (20) sorbitan ................ Surfactants, related monostearate.
adjuvants of surfactants
[Poly[oxy(methyl-1,2-
Not to exceed Surfactant ethanediyl)] , [alpha]-[2- 15% in the bis(2-
formulated hydroxyethyl)amino]propyl]- product; only [omega]-hydroxy,-ether with for use with [alpha]-hydro-[omega]-
glyphosate. hydroxypoly(oxy-1,2- ethanediyl) (1:2), mono- C12 16 alkyl ethers, (CAS Reg. No. 176022-82-5). Polysorbate 65, conforming to ................ Emulsifier 21 CFR 172.838. Potassium aluminum silicate.. ................ Solid diluent, carrier Potassium hydroxide.......... ................ Neutralizer Potassium phosphate.......... ................ Buffer Potassium sulfate............ ................ Solid diluent Propane...................... ................ Propellant n-Propanol................... ................ Solvent, cosolvent 2-Propenoic acid, 2-methyl-, ................ Encapsulating agent, polymer with ethyl 2-
dispensers, resins, propenoate and methyl 2-
fibers and beads methyl-2-propenoate, ammonium salt (CAS Registration No. 55989-05- 4), minimum number average molecular weight (in amu), 18,900. Propionic acid............... ................ Catalyst Propylene glycol............. ................ Solvent, cosolvent. Propylene glycol alginate (as ................ Defoaming agent defined in 21 CFR 172.858). Propyl gallate............... ................ Antioxidant Propyl p-hydroxybenzoate..... ................ Preservative for formulations Pyrophyllite................. ................ Solid diluent, carrier Rhizobium inoculants (e.g. ................ All leguminous food Sinorhizobium,
commodities Bradyrhizobium & Rhizobium). Rosin, partially dimerized ................ Surfactants, related (as defined in 21 CFR
adjuvants of 172.615).
surfactants Rosin, partially hydrogenated ................ Do. (as defined in 21 CFR 172.615). Rosin, wood.................. ................ Do. Salts of fatty acids,
................ Binder, emulsifier, conforming to 21 CFR 172.863.
anticaking agent Sand......................... ................ Solid diluent, carrier Secondary alkyl (C11-C15) ................ Surfactant poly(oxyethylene) acetate, sodium salt; the ethylene oxide content averages 5 moles. Shellac, bleached; refined, ................ Coating agent food grade, arsenic and rosin-free. Soap (sodium or potassium ................ Surfactant, emulsifier, salts of fatty acids).
wetting agent Soapstone.................... ................ Solid diluent Sodium acid pyrophosphate.... ................ Surfactant, suspending agent, dispersing agent, buffer Sodium [alpha]-
................ Surfactants, related olefinsulfonate (sodium C14-
adjuvants of C16) (Olefin sulfonate).
surfactants Sodium aluminum silicate..... ................ Solid diluent, carrier Sodium benzoate.............. ................ Anticaking agent Sodium bicarbonate........... ................ Neutralizer Sodium
................ Surfactants, related diisobutylnaphthalenesulfona
adjuvants of te.
surfactants Sodium dioctylsulfosuccinate. ................ Do. Sodium
................ Do. dodecylphenoxybenzenedisulfo nate. Sodium hexametaphosphate..... ................ Surfactant, emulsifier, wetting agent, suspending agent, dispersing agent, buffer Sodium hydroxide............. ................ Neutralizer Sodium
................ Surfactants, related isopropylisohexylnaphthalene
adjuvants of sulfonate.
surfactants Sodium N-lauroyl-N-
................ Do. methyltaurine. Sodium lauryl glyceryl ether ................ Do. sulfonate. Sodium metasilicate.......... ................ Surfactants, emulsifiers, wetting agents, dispersing agents, buffer Sodium monoalkyl and dialkyl ................ Surfactants, related (C8-C16)
adjuvants of phenoxybenzenedisulfonate
surfactants mixtures containing not less than 70% of the monoalkylated product. Sodium mono- and dimethyl ................ Do. naphthalenesulfonates, molecular weight (in amu) 245-260. Sodium mono-, di-, and
................ Do. tributyl naphthalenesulfonates. Sodium mono-, di-, and
................ Do. triisopropyl naphthalenesulfonate. Sodium N-oleoyl-N-
................ Do. methyltaurine. Sodium oleyl sulfate......... ................ Do.
[[Page 23123]]
Sodium N-palmitoyl-N-
................ Do. methyltaurine. Sodium propionate............ ................ Preservative for formulation Sodium salt of sulfated oleic ................ Surfactants, related acid.
adjuvants of surfactants Sodium silicate.............. ................ Surfactant, emulsifier, wetting agent, stabilizer, inhibitor Sodium starch glycolate (CAS Granular and Disintegrant Reg. No. 9063-38-1).
tableted products only; not to exceed 8% of the formulated product. Sodium sulfate............... ................ Solid diluent, carrier Sodium sulfite............... ................ Stabilizer Sodium thiosulfate anhydrous Not to exceed 6% Dechlorinator, reducing (CAS Reg. No.7772-98-7 or of the
agent sodium thiosulfate
formulated pentahydrate,CAS Reg. No. product. 10102-17-7). Sodium tripolyphosphate...... ................ Buffer, surfactant, suspending agent, dispersing agent, anticaking agent, conditioning agent Sorbitan fatty acid esters ................ Surfactants, related (fatty acids limited to C12,
adjuvants or C14, C16, and C18 containing
surfactants. minor amounts of associated fatty acids) and their derivatives; the poly(oxyethylene) content averages 5-20 moles. Sorbic acid (and potassium ................ Preservative for salt).
formulations Sorbitol..................... ................ Antidusting agent Soy protein, isolated........ Expires May 24, Adhesive 2005. Soybean flour................ Expires May 24, Surfactant 2005.. Soybean oil-derived fatty ................ Solvent, cosolvent acids. Sperm oil conforming to 21 ................ Coating agent CFR 172.210. Stearic acid................. ................ Diluent
[alpha] -Stearoyl-[omega]- ................ Emulsifier hydroxypoly(oxyethylene), average molecular weight (in amu) of 600.
[alpha] -Stearoyl-[omega]- ................ Surfactants, related hydroxypoly(oxyethylene);
adjuvants of the poly(oxyethylene)
surfactants content averages either 8, 9, or 40 moles; if a blend of products is used, the average number of moles ethylene oxide reacted to produce any product that is a component of the blend shall be either 8, 9, or 40. Sucrose octaacetate.......... ................ Adhesive Sulfuric acid (CAS Reg. No. 0.1% of
pH control agent 7664-93-9) that meets the pesticide Food Chemicals Codex
formulation. specifications. Sulfurous acid............... ................ Preservative Synthetic paraffin and its ................ Carrier, binder, and succinic derivatives
carrying agent conforming to 21 CFR 172.275. Synthetic petroleum wax, ................ Binder, carrier, and conforming to 21 CFR 172.888.
coating agent Talc......................... ................ Solid diluent, carriers Tall oil; fatty acids not ................ Surfactants, related less than 58%, rosin acids
adjuvants of not more than 44%,
surfactants unsaponifiables not more than 8%. Tartrazine................... ................ Dye 1,1,1,2-Tetrafluoroethane, ................ Aerosol propellant (CAS Reg. No. 811-97-2). Tetrahydrofurfuryl alcohol... ................ Solvent cosolvent
[alpha] -[p-(1,1,3,3-
................ Surfactants, related Tetramethylbutyl)phenyl]-
adjuvants of [omega]-
surfactants hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-(1,1,3,3- tetramethylbutyl)phenol with a range of 1-14 or 30-70 moles of ethylene oxide: if a blend of products is used, the average range number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 1-14 or 30-70.
[alpha] -[p-(1,1,3,3-
................ Do. Tetramethylbutyl) phenyl]- [omega]- hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-(1,1,3,3- tetramethylbutyl) phenol with an average of 4-14 or 30-70 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4- 14 or 30-70. 2,4,7,9-Tetramethyl-5-decyn- Not more than Surfactants, related 4, 7-diol.
2.5% of
adjuvants of pesticide
surfactants formulation. Tetrasodium pyrophosphate.... ................ Anticaking agent, conditioning agent Tricalcium phosphate......... ................ Surfactant, suspending agent, dispersing agent, anticaking agent, conditioning agent 1,1,1-Trichloroethane........ ................ Solvent, cosolvent Trichlorofluoromethane....... ................ Propellant Tridecylpoly(oxyethylene) ................ Surfactants, related acetate, sodium salt; where
adjuvants of the ethylene oxide content
surfactants averages 6-7 moles.
[[Page 23124]]
Trisodium phosphate.......... ................ Surfactant, emulsifier, wetting agent Vermiculite.................. ................ Solid diluent, carrier. Walnut shells................ ................ Leaching inhibitor, binder for water- dispersible aggregates, sticker and suspension stabilizer Wheat, including flour, bran, Expires May 24, Solid diluent carrier, and starch.
2005..
attractant Wheat bran................... ................ Do. Wintergreen oil.............. ................ Attractant Wood flour................... Derived from Solid diluent and wood free of carrier chemical preservatives. Xanthan gum-modified,
Not more than Surfactant produced by the reaction of 0.5% of xanthan gum and glyoxal
pesticide (maximum 0.3% by weight). formulation. Xylene meeting the
In pesticide Solvent, cosolvent specifications listed in 21 formulations CFR 172.884(b)(4).
for grain storage only. Zeolite (hydrated alkali ................ Solid diluent, carrier aluminum silicate). Zinc oxide................... ................ Coating agent Zinc sulfate (basic and
................ Do. monohydrate). Zinc sulfate (basic and
................ Solid diluent, carrier monohydrate).
0 10. Section 180.920 is added to subpart D to read as follows:
Sec. 180.920 Inert ingredients used pre-harvest; exemptions from the requirement of a tolerance.
The following materials are exempted from the requirement of a tolerance when used in accordance with good agricultural practice as inert (or occasionally active) ingredients in pesticide formulations applied to growing crops only:
Inert ingredients
Limits
Uses
Acetonitrile................. Not more than Solvent for blended 0.5% of
emulsifiers in all pesticide
pesticides used before formulation. crop emerges from soil and in herbicides before or after crop emerges Acetophenone................. ................ Attractant Adenosine (CAS Reg. No. 58-61- Maximum of 0.5% Synergist 7).
of formulation. Alder bark................... ................ Seed germination stimulator
[alpha] -Alkyl (C12-C18)- ................ Surfactants, related [omega]-
adjuvants of hydroxypoly(oxyethylene)
surfactants copolymers with poly(oxypropylene); polyoxyethylene content averages 3-12 moles and polyoxypropylene content 2-9 moles.
[alpha] -Alkyl (C10-C16)- ................ Surfactants, related [omega]-
adjuvants of hydroxypoly(oxyethylene)
surfactants mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the poly(oxyethylene) content averages 3-20 moles.
[alpha] -Alkyl (C12-C15)- Not more than Emulsifiers in [omega]-
0.2% in the pesticide concentrates hydroxypoly(oxyethylene) final solution. applied with liquid sulfosuccinate,
fertilizer solutions isopropylamine and N-
before crop emerges hydroxyethyl isopropylamine
from soil or not later salts of; the
than 4 weeks after poly(oxyethylene) content
planting averages 3-12 moles.
[alpha] -Alkyl(C10-C12)-
................ Surfactants, related [omega]-
adjuvants of hydroxpoly(oxyethylene)
surfactants. poly(oxypropylene) copolymer; poly(oxyethylene) content is 11-15 moles; poly(oxyproplene) content is 1-3 moles.
[alpha] -Alkyl(C12-C18)-
................ Do. [omega]- hydroxypoly(oxyethylene/ oxypropylene) hetero polymer in which the oxyethylene content averages 13-17 moles and the oxypropylene content averages 2-6 moles.
[alpha] -Alkyl (C10-C16)- ................ Do. [omega]-hydroxypoly (oxyethylene)poly(oxypropyle ne) mixture of di- and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the combined poly(oxyethylene) poly(oxypropylene) content averages 3-20 moles.
[alpha] -Alkyl (C12-C18)- ................ Do. [omega]- hydroxypoly(oxyethylene/ oxypropyl ene) hetero polymer in which the oxyethylene content is 8-12 moles and the oxypropylene content is 3-7 moles.
[[Page 23125]]
[alpha] -Alkyl (C12-C15)- ................ Solvent, cosolvent, [omega]-
surfactant, and hydroxypoly(oxyethylene/
related adjuvants of oxypropylene) hetero polymer
surfactants in which the oxyethylene content is 8-13 moles and the oxypropylene content is 7-30 moles.
[alpha] -Alkyl (C21-C71)- Not to exceed Wetting agent or [omega]-hydroxypoly
10%.
granule coating (oxyethylene) in which the poly(oxyethylene) content is 2 to 91 moles and molecular weight range from 390 to 5,000. n-Alkyl(C8-C18)amine acetate. ................ Surfactants, related adjuvants of surfactants Almond, bitter............... ................ Attractant Aluminum 2-ethylhexanoate.... Not more than Gelling agent 0.25% of pesticide formulation. Aluminum sulfate............. ................ Safener adjuvant Amine salts of alkyl(C8-C24) ................ Surfactants, related benzenesulfonic acid
adjuvants of (butylamine,
surfactants dimethylaminopropylamine, mono- and diisopropylamine, mono-, di-, and triethanolamine). N-(Aminoethyl) ethanolamine For use only in Do. salt of
liquid dodecylbenzenesulfonic acid. emulsifiable herbicide concentrates. Ammonium nitrate (CAS Reg. ................ Adjuvant/ intensifier No. 6484-52-2).
for herbicides Ammonium polyphosphate (CAS ................ Sequestrant, buffer, or Reg. No. 68333-79-9).
surfactant Ammonium thiocyanate......... ................ Adjuvant/intensifier for defoliation of, and weed control in/on cotton and soybeans Animal waste material
E. coli and Carrier (produced by the
Salmonella thermophilic digestion of free; heavy cattle and poultry manure). metal content not to exceed the following: Material/ Concentration (ppm): As/12.5; Cd/12.0; Cu/ 14.0; Pb/17.0; Hg/0.1; Se/0.2. Barium sulfate............... ................ Carrier 1,2-Benzisothiazolin-3-one... Not more than Preservative/stabilizer 0.1% of formulation. Not more than 0.02 lb to be applied per acre. N,N-Bis[[alpha]-ethyl-[omega]- ................ Surfactants for hydroxypoly(oxyethylene)
preemergence use with alkylamine; the
herbicides on poly(oxyethylene) content
sugarcane only averages 3 moles; the alkyl groups (C14-C18) are derived from tallow, or from soybean or cottonseed oil acids. N,N-Bis(2-
................ Surfactants, related hydroxyethyl)alkylamine,
adjuvants of where the alkyl groups (C8-
surfactants C18) are derived from coconut, cottonseed, soya, or tallow acids. N,N-Bis 2-([omega]-
................ Do. hydroxypolyoxyethylene) ethyl) alkylamine; the reaction product of 1 mole N,N-bis(2- hydroxyethyl)alkylamine and 3-60 moles of ethylene oxide, where the alkyl group (C8-C18) is derived from coconut, cottonseed, soya, or tallow acids. N,N-Bis-2-([omega]-
................ Surfactant, related hydroxypolyoxyethylene/
adjuvants of polyoxypropylene) ethyl
surfactants alkylamine; the reaction product of 1 mole of N,N- bis(2-hydroxyethyl alkylamine) and 3-60 moles of ethylene oxide and propylene oxide, where the alkyl group (C8-C18) is derived from coconut, cottonseed, soya, or tallow acids. Boric acid................... ................ Sequestrant Buffalo gourd root powder No more than 2.5 Gustatory stimulant (Cucurbita foetidissima root lbs/acre/season powder); or, Zucchini juice (3.4 gm/acre/ (Cucurbita pepo juice) or season of Hawkesbury melon Citrullus Cucurbitacin). lanatus.. Butoxytriethylene glycol ................ Surfactants for phosphate.
arsenical herbicide formulations only 1,3-Butylene glycol
Not more than Stabilizer dimethyacrylate.
0.1% of pesticide formulation. Butyl stearate............... ................ Defoamer
[gamma] -Butyrolactone........ ................ Solvent C.I. Pigment Blue 15 For seed
Dye, coloring agent (CAS Reg. No. 147-14-8;
treament use containing no more than 50 only. ppm polychlorinated biphenyls (PCBs)). C.I. Pigment Green 7 For seed
Dye, coloring agent (CAS Reg. No. 1328-53-6; treatment use containing no more than 50 only. ppm polychlorinated biphenyls (PCBs)). C.I. Pigment Violet 23 (CAS Reg. No. 6358-30- treatment use 1; containing no more than only. 20 ppb of polychlorinated dibenzo-p-dioxins and/or polychlorinated dibenzofurans).
[[Page 23126]]
Calcium and sodium salts of ................ Surfactants, related certain sulfonated petroleum
adjuvants of fractions (mahogany soaps);
surfactants calcium salt molecular weight (in amu) 790-1,020, sodium salt molecular weight (in amu) 400-500. Camphor (CAS Reg. No. 76-22- Not more than 5% Deodorant, melting 2).
weight to
point adjustment weight (w/w) of pesticide formulations. Carous chloride.............. 10 ppm in
Tagging agent formulation. Carrageenan, conforming to 21 Not more than Thickener and CFR 172.260.
0.15% of
stabilizer for pesticide
pesticide formulations formulation. applied to seeds before planting Chlorobenzene................ Contains not Solvent, cosolvent more than 1% impurities. Not for use after edible parts of plant begin to form. Do not graze livestock in treated areas within 48 hours after application. 5-Chloro-2-methyl-4-
Not more than Preservative isothiazolin-3-one (in
0.0022% (22.5 combination with 2-methyl-4- ppm) in the isothiazolin-3-one).
formulation; 0.00022% (or 2.25 ppm) in the final solution applied to growing crops. Condensation product of
................ Stabilizer. orthophenylphenol with 5 moles of ethylene oxide. Copper naphthenate........... Not more than Mercaptan scavenger in 2.5% of
technical pesticide formulation; application limited to before edible portions of plants begin to form. Copper salts of neodecanoic Not more than 1% Do. acid and 2-ethylhexanoic of formulation; acid.
application limited to before edible portions of plants begin to form. Cyclohexane.................. ................ Solvent, cosolvent Cyclohexanol................. ................ Do. Cyclohexanone................ ................ Do. Cysteine (CAS Reg. No. 52-90- Maximum of 0.5% Synergist 4).
of formulation. D&C Green No. 6.............. ................ Dye D&C Red No. 17, technical ................ Dye grade. D&C Red No. 33 (CAS Reg. No. ................ Dye 3567-66-6); meeting the specifications listed in 21 CFR 74.1333. D&C Violet No. 2, technical Not more than Dye grade.
0.005% of pesticide formulation. n-Decyl alcohol.............. ................ Do. Diacetone alcohol............ ................ Deactivator, solvent for formulations used before crop emerges from soil Diallyl phthalate............ Not more than Stabilizer 0.1% of pesticide formulation. Diammonium phosphate (CAS ................ Buffer, surfactant Reg. No. 7783-28-0).
[alpha] -(Di-sec-
................ Surfactants, related butyl)phenylpoly(oxypropylen
adjuvants of e) block polymer with
surfactants poly(oxyethylene); the poly(oxypropylene) content averages 4 moles, the poly(oxyethylene) content averages 5 to 12 moles, the molecular. Diethanolamine............... ................ Stabilizer, inhibitor for formulations used before crop emerges from soil Diethylene glycol............ ................ Deactivator, adjuvant for formulations used before crop emerges from soil Diethylene glycol and
................ Deactivator for diethylene glycol monobutyl,
formulations used monoethyl, and monomethyl
before crop emerges ethers.
from soil, stabilizer 3,6-Dimethyl-4-octyn-3,6-diol In pesticide Surfactants, related formulations, adjuvants of for soil prior surfactants to planting or to plants before edible parts form. Dimethyl sulfoxide........... ................ Solvent or cosolvent for formulations used before crop emerges from soil or prior to formation of edible parts of food plants Dipotassium hydrogen
................ Buffering agent phosphate. Dipropylene glycol dibenzoate For seed
Solvent, cosolvent treatment use only. Dipropylene glycol monomethyl ................ Stabilizer ether. Disodium 4-isodecyl
................ Surfactants related sulfosuccinate.
adjuvants of surfactants. Dodecylphenol................ ................ Coupling agent in emulsifier
[[Page 23127]]
[alpha] -Dodecylphenol-[omega]- ................ Surfactants, related hydroxypoly(oxyethylene/
adjuvants of oxypropylene) hetero polymer
surfactants where ethylene oxide content is 11-13 moles and oxypropylene content is 14- 16 moles, molecular weight (in amu) averages 600 to 965. Douglas-fir bark, ground..... ................ Solid diluent, carrier Dysprosium chloride.......... 10 ppm in
Tagging agent formulation. Ethylene glycol.............. ................ Antifreeze, deactivator for all pesticides used before crop emerges from soil and in herbicides before or after crop emerges Ethylene glycol monobutyl ................ ....................... ether. Ethylene glycol monomethyl ................ Solvent for ether.
formulations used before crop emerges from soil 2-Ethylhexanol............... ................ Cosolvent, defoamer, solvent for all pesticides used before crop emerges from soil and in herbicides before or after crop emerges Ethyl methacrylate........... ................ Surfactants, related adjuvants of surfactants Europic chloride............. 10 ppm in
Tagging agent formulation. FD&C Red No. 40 (CAS Reg. No. For seed
Dye, coloring agent 25956-17-6).
treatment use only. Not to exceed 2% by weight of the pesticide formulation. Ferric chloride.............. ................ Not greater than 2% of suspending, dispersing agent, pesticide formulation Fluoroapatite................ ................ Solid diluent, carrier Folic acid (CAS Reg. No. 59- Maximum of 0.5% Synergist 30-3).
of formulation. Furfural byproduct (a
................ Solid diluent, carrier granular steam-acid sterilized, lignocellulosic residuum in the extraction of furfural from corn cobs, sugarcane bagasse, cottonseed hulls, oat hulls, and rice hulls). Gluconic acid (and sodium ................ Sequestrant salt). l-Glutamic acid (C5 H9 NO4; Seet treatment Plant nutrient CAS Reg. No. 56-86-0).
use only. Glutamine (CAS Reg. No. 56-85- Maximum of 0.5% Synergist 9).
of formulation. Glycerol--propylene oxide ................ Component in water- polymer (CAS Reg. No. 25791-
soluble film 96-2). Glyceryl triacetate.......... ................ Stabilizer Glyceryl tris-12-
................ Flow control agent hydroxystearate. Graphite..................... ................ Treatment aid for seeds Hexamethylenetetramine....... ................ Stabilizer for carriers in solid pesticide formulations 2-Hydroxy-4-n-
Not more than Light stabilizer octoxybenzophenone (CAS Reg. 0.2 pt of No. 1843-05-6).
pesticide formulation. Hydroxypropyl guar gum....... ................ Thickener Isoamyl acetate.............. Not more than Odor-masking agent 0.5% of pesticide formulation. Isobornyl acetate............ ................ Solvent Isobutyl alcohol............. ................ Do. Isobutylene-butene copolymers For soil
Binder application only. Isooctadecanol............... Not more than 2% Defoaming agent of pesticide formulation. Isophorone (CAS Reg. No. 78- ................ Solvent, cosolvent 59-1). Isopropylbenzene............. ................ Solvent, cosolvent Isopropylbenzenesulfonic acid ................ Surfactants and related and its ammonium, calcium,
adjuvants of magnesium, potassium,
surfactants sodium, and zinc salts. Lanthanum chloride........... 10 ppm in
Tagging agent. formulation. (3-Lauramidopropyl)
Not more than Antistatic agent trimethylammonium methyl 2.6% in the sulfate.
formulation. Not to be applied within 7 days of harvest. Linoleic diethanolamide (CAS ................ Surfactant Reg. No. 56863-02-6). Magnesium nitrate (in
None............ Preservation combination with 2-methyl-4- isothiazolin-3-one and 5- chloro-2-methyl-4- isothiazolin-3-one). Maleic acid and maleic
For pesticide Stabilizer anhydride.
formulations applied to apples with a minimum preharvest interval of 21 days. Manganese carbonate.......... ................ Plant nutrient Mesityl oxide................ Not for use Solvent, cosolvent after edible parts of plant begin to form. Do not graze livestock in treated areas within 48 hours after application.
[[Page 23128]]
Methionine (CAS Reg. No. 59- Maximum of 0.5% Synergist 51-8).
of formulation. Methyl alcohol............... ................ Do. Methyl bis(2-
................ Surfactant hydroxyethyl)alkyl ammonium chloride, where the carbon chain (C8-C18) is derived from coconut, cottonseed, soya, or tallow acids.
[alpha] ,[alpha]'-
................ Solvent, cosolvent, [Methylenebis]-4-(1,1,3,3-
surfactant, and tetramethylbutyl)-o-
related adjuvants of phenylene bis[[omega]-
surfactants hydroxypoly(oxyethylene)] having 6-7.5 moles of ethylene oxide per hydroxyl group. Methylene blue............... ................ Dye for formulations used on cotton Methyl ethyl ketone.......... ................ Surfactant Methyl p- hydroxybenzoate.... ................ Preservative for formulations Methyl isoamyl ketone........ ................ Solvent, cosolvent Methyl isobutyl ketone....... ................ Do. 2-Methyl-4-isothiazolin-3-one Not more than Preservative (in combination with 5-
0.0022% (22.5 chloro-2-methyl-4-
ppm) in the isothiazolin-3-one).
formulation; 0.00022% (or 2.25 ppm) in the final solution applied to growing crops. Methyl methacrylate.......... ................ Surfactants, related adjuvants of surfactants Methylnaphthalenesulfonic ................ Dispersant acid--formaldehyde condensate, sodium salt. Methyl oleate................ ................ Surfactant 2-Methyl-2,4-pentanediol..... ................ Solvent for formulations used before crop emerges from soil Methyl poly(oxyethylene) ................ Surfactant alkyl ammonium chloride, where the poly(oxyethylene) content is 3-15 moles and the alkyl group (C8-C18) is derived from coconut, cottonseed, soya, or tallow acids. N-Methylpyrrolidone (CAS Reg. ................ Solvent, cosolvent No. 872-504). Methyl violet 2B............. ................ Dye Mixed phytosterols
................ Surfactant. (consisting of campesterol, sitosterol and stigmasterol, with minor amounts of associated plant sterols) derived from edible vegetable oils. Mono- and bis-(1H, 1H, 2H, 2H- Not more than Defoaming agent perfluoroalkyl) phosphates 0.5% of where the alkyl group is pesticide even numbered and in the C6- formulation. C12 range. Mono- and dialkyl (C8-C18) ................ Surfactants, related methylated ammonium chloride
adjuvants of compounds, where the alkyl
surfactants group(s) (C8-C18) are derived from coconut, cottonseed, soya, tallow, or hogfat fatty acids. Morpholine salt of
................ Do. dodecylbenzenesulfonic acid. Naphthalenesulfonic acid- ................ Do. formaldehyde condensate, ammonium and sodium salts. Nicotinamide (CAS Reg. No. 98- Maximum of 0.5% Synergist 92-0).
of formulation.
[alpha] -(p-Nonylphenyl)- ................ Surfactant [omega]- hydroxypoly(oxyethylene); produced by the condensation of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-14 or 30-100 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range 4-14 or 30-100. X-(p- Nonylphenyl)-[omega]- Not more than Emulsifiers in hydroxy-poly(oxyethylene) 0.2% in the pesticide concentrates sulfosuccinate
final solution. applied with liquid isopropylamine and N-
fertilizer solutions hydroxyethyl isopropylamine
before crop emerges salts of: the
from soil or not later poly(oxyethylene) content
than 4 weeks after averages r moles.
planting n- Octyl alcohol............. ................ Solvent, cosolvent
[alpha] -Oleoyl-[omega]-
................ Component of defoamers (oleoyloxy) poly(oxyethylene) derived from [alpha]-hydro-[omega]- hydroxypoly(oxyethylene) (molecular weight 600 amu). Oxo-decyl acetate (CAS reg. ................ Solvent No. 108419-33-6). Oxo-heptyl acetate (CAS Reg. ................ Solvent No. 90438-79-2). Oxo-hexyl acetate (CAS Reg. ................ Solvent No. 88230-35-7). Oxo-nonyl acetate (CAS Reg. ................ Solvent No. 108419-34-7). Oxo-octyl acetate (CAS Reg. ................ Solvent No. 108419-32-5). Oxo-tridecyl acetate (CAS ................ Solvent Reg. No. 108419-35-8). Paraformaldehyde............. Not more than 2% Preservative for of pesticide formulation formulation. Partial sodium salt of N- Not more than 1% Surfactants, related lauryl-[alpha]-
of pesticide adjuvants of iminodipropionic acid.
formulation. surfactants Phenol....................... ................ Solvent, cosolvent
[[Page 23129]]
Phenolic resins.............. Soil
Binding agent applications. Phenolsulfonic acid--
Applied to
Dispersant surfactant formaldehyde--urea
growing plants condensate and its sodium only. salt. (Phthalocyaninato (2))
When used as a Coloring agent, pigment copper; (C.I. pigment blue colorant in low- No. 15).
density plastic films. Pigment red 48............... For seed
Dye treatment use only.
[alpha] -Pinene............... Not more than 2% Stabilizer of formulation by weight. Poly(methylene-p-
................ Encapsulating agent nonylphenoxy)poly(oxypropyle ne) propanol; the poly(oxy- propylene) content averages 4-12 moles. Poly(oxyethylene) adducts of ................ Surfactant, related mixed phytosterols (such
adjuvants sterols to consist of campesterol, stigmasterol and sitosterol with minor amounts of associated plant sterols) derived from edible vegetable oils; polyoxyethylene content averaging 5-26 moles. Poly(oxyethylene) (5)
................ Surfactants, related sorbitan monooleate.
adjuvants of surfactants Polysorbate 60, conforming to ................ Surfactant 21 CFR 172.836. Potassium carbonate.......... ................ Buffering agent Potassium dihydrogen
................ Do. phosphate. Primary n-alkylamines, where ................ Surfactant the alkyl group (C8-C18) is derived from coconut, cottonseed, soya, or tallow acids. Propylene dichloride......... ................ Solvent for formulations used before crop emerges from soil Propylene glycol monomethyl ................ Solvent ether. Pyridoxine (CAS Reg. No. 65- Maximum of 0.5% Synergist 23-6).
of formulation. Rosin, dark wood (as defined ................ Surfactants, related in 21 CFR 178.3870(a)(1)(v)).
adjuvants of surfactants Rosin, gum................... ................ Do. Rosin, tall oil.............. ................ Do. Scandium chloride............ 10 ppm in
Tagging agent formulation. Sodium bisulfate (CAS Reg. ................ Acidifying/buffering No. 7681-38-1).
agent Sodium butyl
................ Surfactants, related naphthalenesulfonate.
adjuvants of surfactants Sodium caseinate............. Expires May 24, Suspending agent and 2005..
binder Sodium 1,4-dicyclohexyl
................ Surfactants, related sulfosuccinate.
adjuvants of surfactants Sodium 1,4-dihexyl
................ Do. sulfosuccinate. Sodium dihydrogen phosphate ................ Buffering agent (CAS Reg. No. 7558-80-7) conforming to 21 CFR 182.6778. Sodium 1,4-diisobutyl
................ Surfactants, related sulfosuccinate.
adjuvants of surfactants Sodium 1,4-dipentyl
................ Do. sulfosuccinate. Sodium 1,4-ditridecyl
................ Do. sulfosuccinate. Sodium fluoride.............. Not more than Stabilizer carrier for 0.25% of
formulations used pesticide
before crop emerges formulation. from soil Sodium metaborate............ ................ Sequestrant Sodium molybdate............. ................ Plant nutrient Sodium mono- and dimethyl ................ Surfactants, related naphthalenesulfonate;
adjuvants of molecular weight (in amu)
surfactants 245-260. Sodium nitrate............... ................ Solid diluent Sodium nitrite............... Not more than 3% Stabilizer, inhibitor. of pesticide formulation. Sodium o-phenylphenate....... Not more than Preservative for 0.1% of
formulation pesticide formulation. Sodium salt of the insoluble ................ Surfactants, related fraction of rosin.
adjuvants of surfactants Sodium salt of partially or ................ Surfactants, related completely saponified dark
adjuvants of wood rosin (as defined in 21
surfactants CFR 178.3870(a)(4)). Sodium tetraborate........... Not more than 2% Buffering agent; of pesticide corrosion inhibitor formulation. Sulfosuccinic acid ester with Not more than Emulsifiers in N-(2,-hydroxy-propyl)
0.2% in the pesticide concentrates oleamide, ammonia and
final solution. applied with liquid isopropylamine salts of.
fertilizer solutions before crop emerges from soil or not later than 4 weeks after planting Tall oil diesters with
................ Component in water- polypropylene glycol (CAS
soluble film Reg. No. 68648-12-4). Tannin....................... ................ Dispersing agent Tertiary butylhydroquinone... ................ Antioxidant 1-Tetradecanamine, N,N-
................ Component in water- dimethyl-, N-oxide (CAS Reg.
soluble film No. 3332-27-2). N,N,N',N[dprime]-Tetrakis-(2- ................ Stabilizer for hydroxypropyl)
formulations used ethylenediamine.
before crop emerges from soil
[[Page 23130]]
[alpha] -[p-(1,1,3,3-
................ Surfactants, related Tetramethylbutyl)phenyl]-
adjuvants of [omega]-
surfactants hydroxypoly(oxyethylene) mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding sodium salts of the phosphate esters; the poly(oxyethylene) content averages 6 to 10 moles. 2,4,7,9-Tetramethyl-5-decyne In pesticide Do. 4,7-diol.
formulations, for application to soil prior to planting or to plants before edible parts form. Tetrapotassium pyrophosphate Not to exceed Sequestrant, anticaking (CAS Reg. No. 7320-345). 10% of
agent, conditioning formulation. agent Tetrasodium N-(1,2-
................ Do. dicarboxyethyl)-N-octadecyl- sulfosuccinamate.
[2,2'(2,5-Thiophenediyl) bis 10 ppm in
Quality control agent (5-tert-butylbenzoxazole)] pesticide (CAS Reg. Number 7128-64-5). formulations. Titanium dioxide (CAS Reg. ................ Pigment/coloring agent No. 13463-67-7).
in plastic bags used to wrap growing banana (preharvest), colorant on seeds for planting Toluene...................... ................ Solvent, cosolvent Toluenesulfonic acid and its ................ Do. ammonium, calcium, magnesium, potassium, sodium, and zinc salts. Tri-tert- butylphenol
................ Surfactant for polyglycol ether (molecular
formulations used weight (in amu) 746).
before crop emerges from soil Triethanolamine.............. ................ Stabilizer, inhibitor for formulations used before crop emerges from soil Triethylene glycol........... ................ Deactivator Triethyl phosphate........... ................ Stabilizer for formulations used before crop emerges from soil Trimethylolpropane (CAS Reg. Not more than Component of water- No. 77-66-9).
15% of the
soluble film pesticide formulation. Trimethylolpropane (CAS Reg. Not to exceed Component in water- No. 77-99-6).
15% by weight soluble film of the film.
[alpha] -[2,4,6-Tris[1-
Not more than Surfactant. (phenyl)ethyl]phenyl]-
15% of the [omega]-hydroxy
formulation. poly(oxyethylene), the poly(oxyethylene) content averages 4-150 moles).
[alpha] -[2,4,6-Tris[1-
Not more than Do. (phenyl)ethyl]phenyl]-
15% of the [omega]-hydroxy
formulation. poly(oxyethylene); mixture of monohydrogen and dihydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, potassium, sodium, and zinc salts, the poly(oxyethylene) content averages 4-150 moles).
[alpha] -[2,4,6-Tris[1-
Not more than Do. (phenyl)ethyl]phenyl]-
15% of the [omega]-hydroxy
pesticide poly(oxyethylene) sulfate, formulation. and the corresponding ammonium, calcium, magnesium, potassium, sodium, and zinc salts, the poly(oxyethylene) content averages 4-150 moles. Tryptophan (CAS Reg. No. 73- Maximum of 0.5% Synergist 22-3).
of formulation. Valeric acid, normal......... Not more than 2% Stenching agent or in pesticide odorant formulations. Vanillin..................... ................ Attractant Woolwax alcohols............. ................ Safener Xylene....................... ................ Solvent, cosolvent Xylenesulfonic acid its
................ Surfactants, related ammonium calcium, magnesium,
adjuvants of potassium, sodium, and zinc
surfactants salts. Yucca extract from Yucca ................ Wetting agent schidigera. Ytterbium chloride........... 10 ppm in
Tagging agent formulation. Yttrium chloride............. 10 ppm in
Tagging agent formulation. Zinc orthophosphate.......... ................ Plant nutrient and safener Zinc stearate, conforming to ................ Flow control agent 21 CFR 182.5994 and 582.5994.
0 11. Section 180.930 is added to subpart D to read as follows:
Sec. 180.930 Inert ingredients applied to animals; exemptions from the requirement of a tolerance.
The following materials are exempted from the requirement of a tolerance when used in accordance with good agricultural practice as inert (or occasionally active) ingredients in pesticide formulations applied to animals:
[[Page 23131]]
Inert ingredients
Limits
Uses
Acetic acid (CAS Reg. No. 64- Not more than Catalyst 19-7).
0.5% of pesticide formulation. Acetic anhydride............. ................ Solvent, cosolvent, stabilizer Acetyl tributyl citrate (CAS ................ Component of plastic Reg. No. 77-90-7).
animal tags Acetylated lanolin alcohol... ................ Moisturizer Alkanoic and alkenoic acids, ................ Emulsifiers mono- and diesters of [alpha]-hydro-[omega]- hydroxypoly(oxyethylene) with molecular weight (in amu) range of 200 to 6,000. Alkyl (C8-C24)
................ Surfactants, benzenesulfonic acid and its
emulsifier, related ammonium, calcium,
adjuvants of magnesium, potassium,
surfactants sodium, and zinc salts.
[alpha] -Alkyl (C9-C18)-
................ Solvent, cosolvent, [omega]-hydroxy
surfactant, and poly(oxyethylene): the
related adjuvants of poly(oxyethylene) content
surfactants averages 2-20 moles.
[alpha] -Alkyl (C12- C15)- ................ Solvent, cosolvent, [omega]-
surfactant, and hydroxypoly(oxyethylene/
related adjuvants of oxypropylene) hetero polymer
surfactants in which the oxyethylene content is 8-13 moles and the oxypropylene content is 7-30 moles.
[alpha] -Alkyl (C8-C10)
................ Do. hydroxypoly(oxypropylene) block polymer with polyoxyethylene; polyoxypropylene content averages 3 moles and polyoxyethylene content averages 5-12 moles.
[alpha] -Alkyl (C6-C14)-
................ Surfactants, related [omega]-
adjuvants of hydroxypoly(oxypropylene)
surfactants block copolymer with polyoxyethylene; polyoxypropylene content is 1-3 moles; polyoxyethylene content is 7-9 moles; average molecular weight (in amu) approximately 635.
[alpha] -alkyl (C12-C15)- Not to exceed Surfactant [omega]-hydroxypoly
20% of (oxypropylene)poly
pesticide (oxyethylene)copolymers
formulations (where the poly(oxypropylene) content is 3-60 moles and the poly(oxyethylene) content is 5-80 moles), the resulting ethoxylated propoxylated (C12-C15) alcohols having a minimum molecular weight (in amu) of 1,500, CAS Reg. No. 68551-13-3.
[alpha] -(p- Alkylphenyl)- ................ Do. [omega]-hydroxypoly (oxyethylene) produced by the condensation of 1 mole of alkylphenol (alkyl is a mixture of propylene tetramer and pentamer isomers and averages C13) with 6 moles of ethylene oxide. Alkyl (C8-C18) sulfate and ................ Do. its ammonium, calcium, magnesium, potassium, sodium, and zinc salts. Amine salts of alkyl (C8-C24) ................ Do. benzenesulfonic acid (butylamine; dimethylamino propylamine; mono- and diisopropyl- amine; and mono- , di-, and triethanolamine). Ascorbyl palmitate........... ................ Preservative Attapulgite-type clay........ ................ Solid diluent, carrier Barium sulfate (CAS Reg. No. ................ Carrier, density 7727-43-7).
control agent Benzoic acid................. ................ Preservative for formulations Butane....................... ................ Propellant n-Butanol (CAS Reg. No. 71-36- ................ Solvent for blended 3).
emulsifiers Butylated hydroxyanisole..... ................ Antioxidant Butylated hydroxytoluene..... ................ Do.
[alpha] -(p-tert- Butylphenyl)- ................ Surfactants, related [omega]-hydroxypoly
adjuvants of (oxyethylene) mixture of
surfactants dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the poly(oxyethylene) content averages 4-12 moles. Calcium carbonate............ ................ Solid diluent, carrier Calcium chloride............. ................ Stabilizer Calcium silicate, hydrated ................ Anticaking agent, solid calcium silicate.
diluent, carrier Calcium stearate (CAS Reg. ................ Stabilizer, component No. 1592-23-0).
of plastic animal tag Calcium sulfate.............. ................ Solid diluent, carrier Calcium and sodium salts of ................ Surfactants, related certain sulfonated petroleum
adjuvants of fractions (mahogany soaps);
surfactants calcium salt molecular weight (in amu) 790-1,020, sodium salt molecular weight (in amu) 400-500. Carbon black (CAS Reg. No. ................ Colorant/pigment in 1333-86-4).
animal tag Carnauba wax (CAS Reg. No. ................ Binder 8015-86-9). Carrageenan, conforming to 21 Minimum
Thickener CFR 172.620.
molecular weight (in amu): 100,000. Cumene (isopropylbenzene).... ................ Solvent, cosolvent Cyclohexanone................ ................ Do.
[[Page 23132]]
D&C Green No. 6.............. ................ Dye, coloring agent D&C Red No. 17............... ................ Do. D&C Violet No. 2............. ................ Do. Diacetyl tartaric acid esters ................ Emulsifier of mono- and diglycerides of edible fatty acids. Dialkyl (C8-C18)
Not more than Flocculating agent in dimethylammonium chloride. 0.2% in silica the manufacture of hydrated silica. silica hydrated silica for use as a solid diluent, carrier Diatomite (diatomaceous
................ Solid diluent, carrier earth). Dibutyltin dilaurate (CAS ................ Component of plastic Reg. No. 77-58-7).
slow release tag Dichlorodifluoromethane...... ................ Propellant Diethylphthalate............. ................ Solvent, cosolvent 1,1-Difluoroethane (CAS Reg. For aerosol Aerosol propellant No. 75-37-6).
pesticide formulations used for insect control in food- and feed- handling establishments and animals. Dimethyl ether (CAS Reg. No. ................ Propellant 115-10-6). 3,6-Dimethyl-4-octyne-3,6- Not more than Surfactants, related diol.
2.5% of
adjuvants of pesticide
surfactants formulation. Dimethylpolysiloxane (CAS ................ Defoaming agent Reg. No. 9016-00-6).
[alpha] -(o,p-Dinonylphenyl)- ................ Surfactants, related [omega]-hydroxypoly
adjuvants of (oxyethylene) mixture of
surfactants dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 moles.
[alpha] -(o,p-Dinonylphenyl)- ................ Do. [omega]-hydroxypoly (oxyethylene), produced by the condensation of 1 mole of dinonylphenol (nonyl group is a propylene trimer isomer) with an average of 4- 14 moles of ethylene oxide. Dipropylene glycol monomethyl ................ Do. ether. Dodecylbenzenesulfonic acid, ................ Do. amine salts.
[alpha] -(p-Dodecylphenyl)- ................ Surfactants, emulsifier [omega]-hydroxypoly (oxyethylene) produced by the condensation of 1 mole of dodecylphenol (dodecyl group is a propylene tetramer isomer) with an average of 4-14 or 30-70 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4- 14 or 30-70 moles. Epoxidized soybean oil (CAS ................ Stabilizer, Reg. No. 8013-07-8).
plasticizer, component animal tag Ethyl alcohol................ ................ Solvent, cosolvent Ethylene oxide adducts of ................ Surfactants, related 2,4,7,9-tetramethyl-5-
adjuvants of decynediol, the ethylene
surfactants oxide content averages 3.5, 10, or 30 moles. 2-Ethyl-1-hexanol............ Not more than Solvent, adjuvant of 2.5% of
surfactants pesticide formulation. Ethyl vinyl acetate (CAS Reg. ................ Component of plastic No. 24937-78-8).
slow release tag FD&C Blue No. 1.............. ................ Dye, coloring agent FD&C Yellow No. 6 Aluminum Not more than 2% Pigment in animal tag Lake (CAS Reg. No. 15790-07- by weight of and similar slow- 5).
pesticide
release devices formulation. Glycerol (glycerin).......... Meets
Solvent and thickener specifications of Food Chemicals Codex. Glycerol monooleate.......... ................ Surfactants, related adjuvants of surfactants Glyceryl monostearate........ ................ Emulsifier Glyceryl tris-12-
................ Flow control agent hydroxystearate. Graphite..................... ................ Solid diluent, carrier n-Hexyl alcohol (CAS Reg. No. ................ Solvent, cosolvent 111-27-3). 2-(2'-Hydroxy-5'-
Not more than Ultraviolet light methylphenyl)benzotriazole 0.5% by weight absorber/stabilizer in (CAS Reg. No. 2440-22-4). of pesticide animal tag and similar formulation. slow-release devices Iron oxide (CAS Reg. No. 1309- ................ Colorant in pesticide 37-1).
formulations for animal tags Isopropyl alcohol............ ................ Solvent, cosolvent 4,4'-Isopropylidenediphenol Not to exceed 1% Stabilizer, component alkyl (C12-C15) phosphites of polymer. animal tag (CAS Reg. No. 92908-32-2). Isopropyl myristate, CAS Reg. ................ Solvent No. 110-27-0. Kaolinite-type clay.......... ................ Solid diluent, carrier Kerosene, U.S.P. reagent..... ................ Solvent, cosolvent Lactic acid.................. ................ Solvent
[alpha] -Lauryl-[omega]-
................ Emulsifier hydroxypoly(oxyethylene), average molecular weight (in amu) of 600.
[[Page 23133]]
[alpha] -Lauryl-[omega]-
................ Surfactants, related hydroxypoly(oxyethylene)
adjuvants of sulfate, sodium salt; the
surfactants poly(oxyethylene) content is 3-4 moles. Lignosulfonate: ammonium, ................ Surfactants, related calcium, magnesium,
adjuvants of potassium, sodium, and zinc
surfactants salts. d-Limonene (CAS Reg. No. 5989- ................ Solvent, fragrance 27-5). Magnesium carbonate.......... ................ Solid diluent, carrier Magnesium silicate, hydrated ................ Do. magnesium silicate. Manganous oxide.............. ................ Do. Methyl alcohol............... ................ Solvent, cosolvent Methyl n-amyl ketone (CAS ................ Solvent, cosolvent Reg. No. 110-43-0).
[alpha] -(Methylene (4-
................ Surfactants, related (1,1,3,3-tetramethylbutyl)-o-
adjuvants of phenylene) bis-[omega]-
surfactants hydroxypoly(oxyethylene) having 6-7.5 moles of ethylene oxide per hydroxyl group. Methyl esters of higher fatty ................ Antidusting agent acids conforming to 21 CFR 573.640. Methyl-p-hydroxybenzoate Meets
Preservative (Methyl paraben).
specifications of Food Chemicals Codex; not to exceed 0.1% in formulations. Methyl isobutyl ketone....... ................ Solvent, cosolvent 2-[Methyl
................ Water repellant agent [(perfluoroalkyl)alkyl(C2- C8)sulfonyl] amino]alkyl(C2- C8) acrylate--alkyl(C2-C8) methacrylates-N- methylolacrylamide copolymer. Mineral oil, U.S.P., or
................ Solvent, diluent conforming to 21 CFR 172.878 or 178.3620(a), (b). Mono-, di-, and
Not to exceed Dispersing-wetting trimethylnaphthalenesulfonic 0.006% in final agent in dip vat acids-formaldehyde
formulation. operations for large condensates, sodium salts.
animals, such as cattle Montmorillonite-type clay.... ................ Solid diluent, carrier Naphthalenesulfonic acid and ................ Surfactants, related its sodium salt.
adjuvants of surfactants Nitrile rubber modified
................ Component of plastic acrylonitrile methylacrylate
slow release tag (CAS Reg. No. 27012-62-0) conforming to 21 CFR 177.1480. Nonyl, decyl, and undecyl ................ Surfactant glycoside mixture with a mixture of nonyl, decyl, and undecyl oligosaccharides and related reaction products (primarily decanol and undecanol) produced as an aqueous-based liquid (50 to 65% solids) from the reaction of primary alcohols (containing 15 to 20% secondary alcohol isomers) in a ratio of 20% C9, 40% C10, and 40% C11 with carbohydrates (average glucose to alkyl chain ratio 1.3 to 1.8).
[alpha] -(p-Nonylphenyl)- ................ Surfactants, related [omega]-
adjuvants of hydroxypoly(oxyethylene)
surfactants mixture of dihydrogen phosphate and monohydrogen phosphate esters and the corresponding ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts of the phosphate esters; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 moles.
[alpha] -(p-Nonylphenyl)- ................ Surfactants, [omega]-
emulsifier, related hydroxypoly(oxyethylene)
adjuvants of produced by the condensation
surfactants. of 1 mole of nonylphenol (nonyl group is a propylene trimer isomer) with an average of 4-15 or 30-90 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4- 15 or 30-90 moles.
[alpha] -(p-Nonylphenyl)- ................ Surfactants, related [omega]-
adjuvants of hydroxypoly(oxyethylene)
surfactants sulfate, and its ammonium, calcium, magnesium, potassium, sodium, and zinc salts; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4 moles.
[alpha] -(p-Nonylphenyl)- ................ Surfactants, related [omega]-
adjuvants of hydroxypoly(oxyethylene)
surfactants sulfate, and its ammonium, calcium, magnesium, monoethanolamine, potassium, sodium, and zinc salts; the nonyl group is a propylene trimer isomer and the poly(oxyethylene) content averages 4-14 or 30-90 moles of ethyiene oxide. Octadecyl 3,5-di-tert-butyl-4- Not more than Thermal stabilizer/ hydroxyhydro cinnamate (CAS 0.5% by weight antioxidant in animal Reg. No. 2082-79-3).
of pesticide tag and similar slow- formulation. release devices Octyl and decyl glucosides ................ Do. mixture with a mixture of octyl and decyl oligosaccharides and related reaction products (primarily n-decanol) produced as an aqueous-based liquid (68-72% solids) from the reaction of straight chain alcohols (C8(45%), C10) with anhydrous glucose.
[[Page 23134]]
Octyl epoxytallate (CAS Reg. ................ Plasticizer, component No. 61788-72-5).
animal tag Oleic acid, conforming to 21 ................ Defoaming agent CFR 172.862 (CAS Reg. No. 112-80-1).
[alpha] -Oleoyl-[omega]-
................ Emulsifier hydroxypoly(oxyethylene), average molecular weight (in amu) of 600.
[alpha] -Oleoyl-[omega]-
................ Emulsifier, defoaming (oleyloxy)poly(oxyethylene)
agent derived from [alpha]-hydro- [omega]- hydroxypoly(oxyethylene), molecular weight (in amu) 600. Oxidized pine lignin, sodium Maximum of 2% of Surfactant, related salt (CAS Reg. No. 68201-23- formulation. adjuvant of surfactant 0). Paraformaldehyde............. Not more than 2% Preservative for of pesticide formulation formulation. Petroleum hydrocarbons,
................ Solvent, diluent light, odorless, conforming to 21 CFR 172.884 or 178.3650. Petroleum hydrocarbons,
................ Do. synthetic isoparaffinic, conforming to 21 CFR 172.882 or 178.3530. Phenol....................... ................ Solvent, cosolvent Pine lignin.................. ................ Adsorbent
[alpha] -Pinene............... Not more than 2% Stabilizer of formulation by weight. Polyethylene (CAS Reg. No. ................ Component of plastic 9002-88-4) conforming to 21
slow release tag CFR 172.615. Polyethylene esters of fatty ................ Surfactants, related acids, conforming to 21 CFR
adjuvants of 172.854.
surfactants Polyethylene glycol [[alpha]- ................ Surfactants, related hydro-[omega]-
adjuvants of hydroxypoly(oxyethylene)];
surfactants mean molecular weight (in amu) 194 to 9,500 conforms to 21 CFR 178.3750. Polyglyceryl phthalate esters ................ Do. of coconut oil fatty acids. Poly(methylene-p-tert-
................ Do. butylphenoxy)poly(oxyethylen e) ethanol; the poly(oxyethylene) content averages 4-12 moles. Poly(methylene-p-
................ Do. nonylphenoxy)poly(oxyethylen e) ethanol; the poly(oxyethylene) content averages 4-12 moles. Poly(methylene-p-
................ Do. nonylphenoxy)poly(oxypropyle ne) propanol; the poly(oxypropylene) content averages 4-12 moles. Potassium hydroxide.......... Meeting Food Neutralizer Chemicals, Codex specifications. Propane...................... ................ Propellant n-Propanol................... ................ Solvent, for blended emulsifiers 2-Propenoic acid, 2-methyl-, ................ Encapsulating polymer with ethyl 2-
agent,dispensers, propenoate and methyl 2-
resins, fibers and methyl-2-propenoate,
beads ammonium salt (CAS Registration No. 55989-05- 4), minimum number average molecular weight (in amu), 18,900. Propylene glycol............. ................ Solvent, cosolvent Propylene glycol monomethyl ................ Deactivator, emmolient ether. Propyl gallate............... ................ Antioxidant Propyl p-hydroxybenzoate Meets
Preservative (Propyl paraben).
specifications of Food Chemicals Codex; not to exceed 0.1% in formulations. Pyrophylite.................. ................ Solid diluent, carrier Rhodamine B.................. Expires December Dye for use in ear tags 27, 2004..
only Secondary alkyl (C11-C15) ................ Surfactant poly(oxyethylene) acetate, sodium salt; the ethylene oxide content averages 5 moles. Silica, hydrated silica...... ................ Anticaking agent, solid diluent, carrier Silica aerogel (finely
................ Component of powdered microcellular
antifoaming agent silica foam having a minimum silica content of 89.5%). Soapstone.................... ................ Solid diluent Sodium benzoate (CAS Reg. No. ................ Anticaking agent/ 532-32-1).
stabilizer/ preservative Sodium
................ Not more than 0.5% of butylnaphthalenesulfonate.
pesticide formulation Sodium
................ Surfactants, related diisobutylnaphthalenesulfona
adjuvants of te.
surfactants Sodium dioctylsulfosuccinate. ................ Do. Sodium hydroxide............. ................ Neutralizer Sodium
................ Surfactants, related isopropylisohexylnaphthalene
adjuvants of sulfonate.
surfactants Sodium
................ Do. isopropylnaphthalenesulfonat e. Sodium monoalkyl and diakyl ................ Do. (C8-C13) phenoxybenzenedisulfonate mixtures containing not less than 70% of the monoalkylated product. Sodium mono- and
................ Do. dimethylnaphthalenesulfonate , molecular weight (in amu) 245-260.
[[Page 23135]]
Sodium mono-, di-, and
................ Solvent, cosolvent tributylnaphthalenesulfonate
stabilizer s. Sodium N-oleoyl-N-methyl Not more than 1% Surfactant taurine.
of pesticide formulations. Sodium starch glycolate (CAS Granular and Disintegrant Reg. No. 9063-38-1).
tableted products only; not to exceed 8% of the formulated product. Sodium sulfate............... ................ Solid diluent, carrier Sorbitan fatty acid esters ................ Buffering agent; (fatty acids limited to C12,
corrosion inhibition C14, C16, and C18 containing minor amounts of associated fatty acids) and poly(oxyethylene) derivatives of sorbitan fatty acid esters; the poly(oxyethylene) content averages 16-20 moles. Sorbitol..................... ................ Antidusting agent. Soy protein, isolated........ Expires May 24, Adhesive 2005.. Stearic acid (CAS Reg. No. 57- ................ Lubricant, component 11-4).
animal tag
[alpha] -Stearoyl-[omega]- ................ Emulsifier hydroxypoly(oxyethylene), average molecular weight (in amu) of 600.
[alpha] -Stearoyl-[omega]- ................ Surfactants; related hydroxypoly(oxyethylene);
adjuvants of the poly(oxyethylene)
surfactants content averages 8, 9, or 40 moles; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be 8, 9, or 40. Sulfur (CAS Reg. No. 7704-34- ................ Stabilizer 9). Talc......................... ................ Do. Tall oil; fatty acids not ................ Surfactants, related less than 58%, rosin acids
adjuvants of not more than 44%,
surfactants unsaponifiables not more than 8%. Tartrazine................... ................ Dye, coloring agent
[alpha] -[p-(1,1,3,3-
................ Surfactants, related Tetramethylbutyl)phenyl]-
adjuvants of [omega]-
surfactants hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p (1,1,3,3- tetramethylbutyl)phenol with a range of 1-14 or 30-70 moles of ethylene oxide: if a blend of products is used, the average range number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 1-14 or 30-70.
[alpha] -[p-(1,1,3,3-
................ Surfactants, related Tetramethylbutyl)phenyl]-
adjuvants of [omega]-
surfactants hydroxypoly(oxyethylene) produced by the condensation of 1 mole of p-(1,1,-3,3- tetramethylbutyl) phenol with an average of 4-14 or 30-70 moles of ethylene oxide; if a blend of products is used, the average number of moles of ethylene oxide reacted to produce any product that is a component of the blend shall be in the range of 4- 14 or 30-70. 2,4,7,9-Tetramethyl-5-decyne- Not more than Do. 4.7-diol.
2.5% of pesticide formulation. Titanium dioxide (CAS Reg. ................ Pigment/colorant in No. 13463-67-7).
pesticide formulations for animal tag Toluenesulfonic acid and its ................ Do. ammonium, calcium, magnesium, potassium, sodium, and zinc salts. Triacetin (glyceryl
................ Solvent, cosolvent triacetate). Tri-tert-butylphenol
................ Dispersing agent polyglycol ether (molecular weight (in amu) 746). 1,1,1-Trichloroethane........ ................ Solvent, cosolvent Trichlorofluoromethane....... ................ Propellant Tridecylpoly(oxyethylene) ................ Surfactants, related acetate sodiums salt; where
adjuvants of the ethylene oxide content
surfactants averages 6-7 moles. Triethylene glycol diacetate For use on beef Solvent (CAS Reg. No. 111-21-7). cattle only. Trisodium phosphate.......... ................ Precipitant, buffer, filler Ultramarine blue(CAS Reg. No. Not more than Pigment/colorant in 57455-37-5).
1.5% of
animal tag pesticide formulation. Wheat shorts................. Expires May 24, Solid diluent 2005.. Wood rosin acid, potassium ................ Surfactants, related salts, conforming to 21 CFR
adjuvants of 178.3870.
surfactants Xylene....................... ................ Solvent, cosolvent Xylenesulfonic acid and its ................ Surfactants, related ammonium, calcium,
adjuvants of magnesium, potassium,
surfactants sodium, and zinc salts. Zinc oxide................... ................ Solid diluent, carrier Zinc stearate, conforming to ................ Water repellant, 21 CFR 182.5994 and 582.5994.
dessicant, and coating agent. Zinc stearate (CAS Reg. No. ................ Water repellant, 557-05-1).
desiccant, and coating agent; stabilizer, component of plastic animal tag
[[Page 23136]]
Zinc sulfate (basic and
................ Water repellant, monohydrate).
dessicant, and coating agent
0 12. Section 180.940 is added to subpart D to read as follows:
Sec. 180.940 Tolerance exemptions for active and inert ingredients for use in antimicrobial formulations (Food-contact surface sanitizing solutions).
Residues of the following chemical substances are exempted from the requirement of a tolerance when used in accordance with good manufacturing practice as ingredients in an antimicrobial pesticide formulation, provided that the substance is applied on a semi-permanent or permanent food-contact surface (other than being applied on food packaging) with adequate draining before contact with food.
(a) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food-contact surfaces in public eating places, dairy-processing equipment, and food- processing equipment and utensils.
Pesticide Chemical
CAS Reg. No.
Limits
Acetic acid
64-19-7
When ready for use, the end-use concentration is not to exceed 290 ppm
[alpha] -Alkyl(C10-C14)-
None
None [omega]-hydroxypoly (oxyethylene) poly(oxypropylene) average molecular weight (in amu), 768 to 837
[alpha] -Alkyl(C12-C18)-
None
None [omega]-hydroxypoly (oxyethylene) poly(oxypropylene) average molecular weight (in amu), 950 to 1120 Ammonium chloride
12125-02-9
When ready for use, the end-use concentration is not to exceed 48 ppm Ethanol
64-17-5
None Ethylenediaminetetraacetic 64-02-8
None acid (EDTA), tetrasodium salt Hydrogen peroxide
7722-84-1
When ready for use, the end-use concentration is not to exceed 91 ppm Hypochlorous acid, sodium 7681-52-9
When ready for use, the salt
end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Iodine
7553-56-2
When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Magnesium oxide
1309-48-4
None Methylene blue
61-73-4
When ready for use, the end-use concentration is not to exceed 0.4 ppm
[alpha] -(p-Nonylphenyl)- None
None [omega]-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles) Octadecanoic acid, calcium 1592-23-0
None salt 1-Octanesulfonic acid, sodium 5324-84-5
When ready for use, the salt
end-use concentration is not to exceed 46 ppm Octanoic acid
124-07-2
When ready for use, the end-use concentration is not to exceed 52 ppm Oxirane, methyl-, polymer 9003-11-6
None with oxirane, minimum molecular weight (in amu), 1900 Peroxyacetic acid
79-21-0
When ready for use, the end-use concentration is not to exceed 58 ppm Peroxyoctanoic acid
33734-57-5
When ready for use, the end-use concentration is not to exceed 52 ppm Phosphonic acid, (1-
2809-21-4
When ready for use, the hydroxyethylidene)bis-
end-use concentration is not to exceed 14 ppm Phosphoric acid, trisodium 7601-54-9
When ready for use, the salt
end-use concentration is not to exceed 5916 ppm Potassium bromide
7758-02-3
When ready for use, the end-use concentration is not to exceed 46 ppm total available halogen Potassium iodide
7681-11-0
When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Potassium permanganate
7722-64-7
When ready for use, the end-use concentration is not to exceed 0.7 ppm 2-Propanol (isopropanol) 67-63-0
None Quaternary ammonium
8001-54-5
When ready for use, the compounds, alkyl (C12-C18)
end-use concentration benzyldimethyl, chlorides
of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound Quaternary ammonium
None
When ready for use, the compounds, n-alkyl (C12-C14)
end-use concentration dimethyl ethylbenzyl
of all quaternary ammonium chloride, average
chemicals in the molecular weight (in amu),
solution is not to 377 to 384
exceed 200 ppm of active quaternary compound
[[Page 23137]]
Quaternary ammonium compounds None
When ready for use, the n-alkyl (C12-C18) dimethyl
end-use concentration ethylbenzyl ammonium
of all quaternary chloride average molecular
chemicals in the weight (in amu) 384
solution is not to exceed 200 ppm of active quaternary compound Quaternary ammonium compounds None
When ready for use, the di-n-alkyl (C8-C10) dimethyl
end-use concentration ammonium chloride, average
of this specific molecular weight (in amu),
quaternary compound is 332 to 361
not to exceed 150 ppm of active quaternary compound; the end-use concentration of all quaternary chemicals in the solution is not to exceed 200 ppm of active quaternary compound Sodium bicarbonate
144-55-8
None Sulfuric acid monododecyl 151-21-3
When ready for use, the ester, sodium salt (sodium
end-use concentration lauryl sulfate)
is not to exceed 3 ppm 1,3,5-Triazine-
2893-78-9
When ready for use, the 2,4,6(1H,3H,5H)-trione, 1,3-
end-use concentration dichloro-, sodium salt
of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine
(b) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Dairy processing equipment, and food-processing equipment and utensils.
Pesticide Chemical
CAS Reg. No.
Limits
Acetic acid
64-19-7
When ready for use, the end-use concentration is not to exceed 686 ppm Acetic acid, chloro-, sodium 68608-66-2
When ready for use, the salt, reaction products with
end-use concentration 4,5-dihydro-2-undecyl-1H-
is not to exceed 42 imidazole-1-ethanol and
ppm chloroacetic acid sodium hydroxide Benzenesulfonic acid, dodecyl- 27176-87-0
When ready for use, the end-use concentration is not to exceed 5.5 ppm Butanedioic acid, octenyl- 28805-58-5
When ready for use, the end-use concentration is not to exceed 156 ppm Butoxy monoether of mixed None
None (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400 Calcium chloride
10043-52-4
When ready for use, the end-use concentration is not to exceed 17 ppm n-Carboxylic acids (C6-C12), None
When ready for use, the consisting of a mixture of
end-use concentration not less than 56% octanoic
is not to exceed 39 acid and not less than 40%
ppm decanoic acid Decanoic acid
334-48-5
When ready for use, the end-use concentration is not to exceed 90 ppm Ethanesulfonic acid, 2-
132-43-4
When ready for use, the [cyclohexyl (1-oxohexadecyl)
end-use concentration amino]-, sodium salt
is not to exceed 237 ppm Ethylenediaminetetraacetic 139-33-3
When ready for use, the acid (EDTA), disodium salt
end-use concentration is not to exceed 1400 ppm FD&C Yellow No. 5
1934-21-0
None (Tartrazine) (conforming to 21 CFR 74.705) D-Gluconic acid, monosodium 527-07-1
When ready for use, the salt
end-use concentration is not to exceed 760 ppm Hydriodic acid
10034-85-2
When ready for use, the total end-use concentration of all iodide-producing chemicals is not to exceed 25 ppm of titratable iodine Hydrogen peroxide
7722-84-1
When ready for use, the end-use concentration is not to exceed 465 ppm Hypochlorous acid
7790-92-3
When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Iodine
7553-56-2
When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Lactic acid
50-21-5
When ready for use, the end-use concentration is not to exceed 138 ppm
[alpha] -Lauroyl-[omega]- None
None hydroxypoly (oxyethylene) with an average of 8-9 moles ethylene oxide, average molecular weight (in amu), 400 Nonanoic acid
112-05-0
When ready for use, the end-use concentration is not to exceed 90 ppm 1-Octanamine, N,N-dimethyl- 7378-99-6
When ready for use, the end-use concentration is not to exceed 113 ppm
[[Page 23138]]
1,2-Octanedisulfonic acid 113669-58-2 When ready for use, the end-use concentration is not to exceed 102 ppm 1-Octanesulfonic acid
3944-72-7
When ready for use, the end-use concentration is not to exceed 172 ppm 1-Octanesulfonic acid, sodium 5324-84-5
When ready for use, the salt
end-use concentration is not to exceed 297 ppm 1-Octanesulfonic acid, 2- 113652-56-5 When ready for use, the sulfino-
end-use concentration is not to exceed 102 ppm Octanoic acid
124-07-2
When ready for use, the end-use concentration is not to exceed 176 ppm Oxirane, methyl-, polymer 11111-34-5
When ready for use, the with oxirane, ether with
end-use concentration (1,2-
is not to exceed 20 ethanediyldinitrilo)tetrakis
ppm [propanol] (4:1) Oxychloro species (including None
When ready for use, the chlorine dioxide) generated
end-use concentration by acidification of an
is not to exceed 200 aqueous solution of sodium
ppm of chlorine chlorite
dioxide as determined by the method titled, Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide) Peroxyacetic acid
79-21-0
When ready for use, the end-use concentration is not to exceed 315 ppm Peroxyoctanoic acid
33734-57-5
When ready for use, the end-use concentration is not to exceed 122 ppm Phosphonic acid, (1-
2809-21-4
When ready for use, the hydroxyethylidene)bis-
end-use concentration is not to exceed 34 ppm Phosphoric acid
7664-38-2
None Phosphoric acid, monosodium 7558-80-7
When ready for use, the salt
end-use concentration is not to exceed 350 ppm Potassium iodide
7681-11-0
When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Propanoic acid
79-09-4
When ready for use, the end-use concentration is not to exceed 297 ppm 2-Propanol (isopropanol) 67-63-0
None 2,6-Pyridinedicarboxylic acid 499-83-2
When ready for use, the end-use concentration is not to exceed 1.2 ppm Sodium mono-and
None
When ready for use, the didodecylphenoxy-
end-use concentration benzenedisulfonate
is not to exceed 1920 ppm Sulfuric acid
7664-93-9
When ready for use, the end-use concentration is not to exceed 288 ppm Sulfuric acid monododecyl 151-21-3
When ready for use, the ester, sodium salt (sodium
end-use concentration lauryl sulfate)
is not to exceed 350 ppm
(c) The following chemical substances when used as ingredients in an antimicrobial pesticide formulation may be applied to: Food- processing equipment and utensils.
Pesticide Chemical
CAS Reg. No.
Limits
Acetic acid
64-19-7
When ready for use, the end-use concentration is not to exceed 686 ppm Acetic acid, chloro-, sodium 68608-66-2
When ready for use, the salt, reaction products with
end-use concentration 4,5-dihydro-2-undecyl-1H-
is not to exceed 42 imidazole-1-ethanol and
ppm chloroacetic acid sodium hydroxide
[alpha] -Alkyl(C10-C14)-
None
None [omega]-hydroxypoly (oxyethylene) poly (oxypropylene) average molecular weight (in amu), 768 to 837
[alpha] -Alkyl(C11-C15)-
None
None [omega]-hydroxypoly (oxyethylene) with ethylene oxide content 9 to 13 moles
[alpha] -Alkyl(C12-C15)-
None
None [omega]-hydroxypoly (oxyethylene) polyoxypropylene, average molecular weight (in amu), 965
[alpha] -Alkyl(C12-C18)-
None
None [omega]-hydroxypoly (oxyethylene) poly(oxypropylene) average molecular weight (in amu), 950 to 1120 Alkyl (C12-C15) monoether of None
None mixed (ethylene-propylene) polyalkylene glycol, cloud point of 70 - 77\0\C in 1% aqueous solution, average molecular weight (in amu), 807
[[Page 23139]]
Ammonium chloride
12125-02-9
When ready for use, the end-use concentration is not to exceed 48 ppm Benzenesulfonamide, N-chloro- 127-65-1
None 4-methyl, sodium salt Benzenesulfonic acid, dodecyl- 27176-87-0
When ready for use, the end-use concentration is not to exceed 400 ppm Benzenesulfonic acid, dodecyl- 25155-30-0
When ready for use, the , sodium salt
end-use concentration is not to exceed 430 ppm Benzenesulfonic acid,
30260-73-2
When ready for use, the oxybis[dodecyl-
end-use concentration is not to exceed 474 ppm
[1,1'-Biphenyl] -2-ol
90-43-7
When ready for use, the end-use concentration is not to exceed 400 ppm Boric acid, sodium salt
7775-19-1
None Butanedioic acid, octenyl- 28805-58-5
When ready for use, the end-use concentration is not to exceed 156 ppm Butanedioic acid, sulfo-, 1,4- 1639-66-3
None dioctyl ester, sodium salt Butoxy monoether of mixed None
None (ethylene-propylene) polyalkylene glycol, cloudpoint of 90 - 100\o\C in 0.5 aqueous solution, average molecular weight (in amu), 3300 Butoxy monoether of mixed None
None (ethylene-propylene) polyalkylene glycol, minimum average molecular weight (in amu), 2400 Calcium bromide
7789-41-5
When ready for use, the end-use concentration of all bromide- producing chemicals in the solution is not to exceed 200 ppm total available halogen Calcium chloride
10043-52-4
When ready for use, the end-use concentration is not to exceed 17 ppm n-Carboxylic acids (C6-C12), None
When ready for use, the consisting of a mixture of
end-use concentration not less than 56% octanoic
is not to exceed 39 acid and not less than 40%
ppm decanoic acid 3-Cyclohexene-1-
98-55-5
None methanol,[alpha],[alpha],4- trimethyl- 1-Decanaminium, N-decyl-N, N- 7173-51-5
When ready for use, the dimethyl-, chloride
end-use concentration is not to exceed 200 ppm of active quaternary compound Decanoic acid
3347-48-5
When ready for use, the end-use concentration is not to exceed 234 ppm Ethanesulfonic acid, 2-
132-43-4
When ready for use, the [cyclohexyl (1-oxohexadecyl)
end-use concentration amino]-, sodium salt
is not to exceed 237 ppm Ethanol
64-17-5
None Ethanol, 2 butoxy-
111-76-2
None Ethanol, 2-(2-ethoxyethoxy)- 111-90-0
None Ethylenediaminetetraacetic 139-33-3
When ready for use, the acid (EDTA), disodium salt
end-use concentration is not to exceed 1400 ppm Ethylenediaminetetraacetic 64-02-8
None acid (EDTA), tetrasodium salt Fatty acids, coco, potassium 61789-30-8
None salts Fatty acids, tall-oil,
68309-27-3
When ready for use, the sulfonated, sodium salts
end-use concentration is not to exceed 66 ppm FD&C Yellow No. 5
1934-21-0
None (Tartrazine) (conforming to 21 CFR 74.705) D-Gluconic acid, monosodium 527-07-1
When ready for use, the salt
end-use concentration is not to exceed 760 ppm Hydriodic acid
10034-85-2
When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Hydrogen peroxide
7722-84-1
When ready for use, the end-use concentration is not to exceed 1100 ppm Hypochlorous acid
7790-92-3
When ready for use, the end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Hypochlorous acid, calcium 7778-54-3
When ready for use, the salt
end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Hypochlorous acid, lithium 13840-33-0
When ready for use, the salt
end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine and 30 ppm lithium Hypochlorous acid, potassium 7778-66-7
When ready for use, the salt
end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine
[[Page 23140]]
Hypochlorous acid, sodium 7681-52-9
When ready for use, the salt
end-use concentration of all hypochlorous acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Iodine
7553-56-2
When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Lactic acid
50-21-5
None
[alpha] -Lauroyl-[omega]- None
None hydroxypoly (oxyethylene) with an average of 8-9 moles ethylene oxide, average molecular weight (in amu), 400 Magnesium oxide
1309-48-4
None Methylene blue
61-73-4
When ready for use, the end-use concentration is not to exceed 0.4 ppm Naphthalene sulfonic acid, 1321-69-3
When ready for use, the sodium salt
end-use concentration of all naphthalene sulfonate chemicals in the solution is not to exceed 332 ppm naphthalene sulfonates Naphthalene sulfonic acid None
When ready for use, the sodium salt, and its methyl,
end-use concentration dimethyl and trimethyl
of all naphthalene derivatives
sulfonate chemicals in the solution is not to exceed 332 ppm naphthalene sulfonates Naphthalene sulfonic acid None
When ready for use, the sodium salt, and its methyl,
end-use concentration dimethyl and trimethyl
of naphthalene derivatives alkylated at 3%
sulfonate chemicals in by weight with C6-C9 linear
the solution is not to olefins
exceed 332 ppm naphthalene sulfonates Neodecanoic acid
26896-20-8
When ready for use, the end-use concentration is not to exceed 174 ppm Nonanoic acid
112-05-0
When ready for use, the end-use concentration is not to exceed 90 ppm
[alpha] -(p-Nonylphenyl)- None
None [omega]-hydroxypoly (oxyethylene) maximum average molecular weight (in amu), 748
[alpha] -(p-Nonylphenol)- None
None [omega]-hydroxypoly (oxyethylene) average poly(oxyethylene) content 11 moles
[alpha] -(p-Nonylphenyl)- None
None [omega]-hydroxypoly (oxyethylene) produced by the condensation of 1 mole p- nonylphenol with 9 to 12 moles ethylene oxide
[alpha] -(p-Nonylphenyl)- None
None [omega]-hydroxypoly (oxyethylene), 9 to 13 moles ethylene oxide Octadecanoic acid, calcium 1592-23-0
None salt 9-Octadecenoic acid (9Z)-, 68988-76-1
When ready for use, the sulfonated
end-use concentration is not to exceed 312 ppm 9-Octadecenoic acid (9Z)- 68443-05-0
When ready for use, the sulfonated, sodium salts
end-use concentration is not to exceed 200 ppm 1-Octanamine, N,N-dimethyl- 7378-99-6
When ready for use, the end-use concentration is not to exceed 113 ppm 1,2-Octanedisulfonic acid 113669-58-2 When ready for use, the end-use concentration is not to exceed 102 ppm 1-Octanesulfonic acid
3944-72-7
When ready for use, the end-use concentration is not to exceed 172 ppm 1-Octanesulfonic acid, sodium 5324-84-5
When ready for use, the salt
end-use concentration is not to exceed 312 ppm 1-Octanesulfonic acid, 2- 113652-56-5 When ready for use, the sulfino-
end-use concentration is not to exceed 102 ppm Octanoic acid
124-07-2
When ready for use, the end-use concentration is not to exceed 234 ppm Oxirane, methyl-, polymer 9003-11-6
None with oxirane, minimum molecular weight (in amu), 1900 Oxirane, methyl-, polymer 106392-12-5 None with oxirane, block, average molecular weight (in amu), 1900 Oxirane, methyl-, polymer None
None with oxirane, block, minimum average molecular weight (in amu), 2000 Oxirane, methyl-, polymer None
None with oxirane, block, 27 to 31 moles of polyoxypropylene, average molecular weight (in amu) 2000 Oxirane, methyl-, polymer 11111-34-5
When ready for use, the with oxirane, ether with
end-use concentration (1,2-
is not to exceed 20 ethanediyldinitrilo)tetrakis
ppm [propanol] (4:1) Oxychloro species
None
When ready for use, the (predominantly chlorite,
end-use concentration chlorate and chlorine
is not to exceed 200 dioxide in an equilibrium
ppm of chlorine mixture) generated either
dioxide as determined (i) by directly metering a
by the method titled, concentrated chlorine
Iodometric dioxide solution prepared
Method for the just prior to use, into
Determination of potable water, or (ii) by
Available Chlorine acidification of an aqueous
Dioxide (50-250 ppm alkaline solution of
available chlorine oxychloro species
dioxide) (predominately chlorite and chlorate) followed by dilution with potable water
[[Page 23141]]
Oxychloro species (including None
When ready for use, the chlorine dioxide) generated
end-use concentration by acidification of an
is not to exceed 200 aqueous solution of sodium
ppm of chlorine chlorite
dioxide as determined by the method titled, Iodometric Method for the Determination of Available Chlorine Dioxide (50-250 ppm available chlorine dioxide) 2,4-Pentanediol, 2-methyl- 107-41-5
None Peroxyacetic acid
79-21-0
When ready for use, the end-use concentration is not to exceed 315 ppm Peroxyoctanoic acid
33734-57-5
When ready for use, the end-use concentration is not to exceed 122 ppm Phenol, 4-chloro-2-
120-32-1
When ready for use, the (phenylmethyl)-
end-use concentration is not to exceed 320 ppm Phenol, 4-(1,1-
80-46-6
When ready for use, the dimethylpropyl)-
end-use concentration is not to exceed 80 ppm Phosphonic acid, (1-
2809-21-4
When ready for use, the hydroxyethylidene)bis-
end-use concentration is not to exceed 34 ppm Phosphoric acid
7664-38-2
None Phosphoric acid, monosodium 7558-80-7
When ready for use, the salt
end-use concentration is not to exceed 350 ppm Phosphoric acid, trisodium 7601-54-9
When ready for use, the salt
end-use concentration is not to exceed 5916 ppm Poly(oxy-1,2-ethanediyl), None
None [alpha]-[(1,1,3,3- tetramethylbutyl) phenyl]- [omega]-hydroxy-, produced with one mole of the phenol and 4 to 14 moles ethylene oxide Potassium bromide
7758-02-3
When ready for use, the end-use concentration of all bromide- producing chemicals in the solution is not to exceed 200 ppm total available halogen Potassium iodide
7681-11-0
When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Potassium permanganate
7722-64-7
When ready for use, the end-use concentration is not to exceed 0.7 ppm Propanoic acid
79-09-4
When ready for use, the end-use concentration is not to exceed 297 ppm 2-Propanol (isopropanol) 67[nd]ash;63-0 None 2,6-Pyridinedicarboxylic acid 499-83-2
When ready for use, the end-use concentration is not to exceed 1.2 ppm Quaternary ammonium
8001-54-5
When ready for use, the compounds, alkyl (C12-C18)
end-use concentration benzyldimethyl, chlorides
of this specific quaternary compound is not to exceed 200 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Quaternary ammonium
None
When ready for use, the compounds, n-alkyl (C12-C14)
end-use concentration dimethyl ethylbenzyl
of this specific ammonium chloride, average
quaternary compound is molecular weight (in amu),
not to exceed 200 ppm 377 to 384
within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Quaternary ammonium
None
When ready for use, the compounds, n-alkyl (C12-C18)
end-use concentration dimethyl ethylbenzyl
of this specific ammonium chloride average
quaternary compound is molecular weight (in amu)
not to exceed 200 ppm 384
within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Quaternary ammonium
None
When ready for use, the compounds, di-n-Alkyl (C8-
end-use concentration C10) dimethyl ammonium
of this specific chloride, average molecular
quaternary compound is weight (in amu), 332 to 361
not to exceed 240 ppm within the end-use total concentration that is not to exceed 400 ppm active quaternary compound Sodium-[alpha]-alkyl(C12-C15)- None
None [omega]-hydroxypoly (oxyethylene) sulfate with the poly(oxyethylene) content averaging one mole Sodium bicarbonate
144-55-8
None Sodium bromide
7647-15-6
When ready for use, the end-use concentration of all bromide- producing chemicals in the solution is not to exceed 200 ppm total available halogen Sodium iodide
7681-82-5
When ready for use, the total end-use concentration of all iodide-producing chemicals in the solution is not to exceed 25 ppm of titratable iodine Sodium mono-and
None
When ready for use, the didodecylphenoxy-
end-use concentration benzenedisulfonate
is not to exceed 1920 ppm Sulfuric acid
7664-93-9
When ready for use, the end-use concentration is not to exceed 228 ppm
[[Page 23142]]
Sulfuric acid monododecyl 151-21-3
None ester, sodium salt (sodium lauryl sulfate) 1,3,5-Triazine-
2782-57-2
When ready for use, the 2,4,6(1H,3H,5H)-trione, 1,3-
end-use concentration dichloro-
of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine-
2244-21-5
When ready for use, the 2,4,6(1H,3H,5H)-trione, 1,3-
end-use concentration dichloro-, potassium salt
of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine-
2893-78-9
When ready for use, the 2,4,6(1H,3H,5H)-trione, 1,3-
end-use concentration dichloro-, sodium salt
of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine-
87-90-1
When ready for use, the 2,4,6(1H,3H,5H)-trione,
end-use concentration 1,3,5-trichloro-
of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 100 ppm determined as total available chlorine 1,3,5-Triazine, N,N',N'`- 7673-09-8
When ready for use, the trichloro-2,4,6-triamino-
end-use concentration of all di- or trichloroisocyanuric acid chemicals in the solution is not to exceed 200 ppm determined as total available chlorine Xylenesulfonic acid, sodium 1300-72-7
When ready for use, the salt
end-use concentration is not to exceed 62 ppm
Sec. 180.1001 [Removed]
0 13. Section 180.1001 is removed.
0 14. In Sec. 180.1067, paragraph (b) is revised to read as follows:
Sec. 180.1067 Methyl eugenol and malathion combination; exemption from the requirement of a tolerance.
* * * * *
(b) This combination is to be impregnated on a carrier (cigarette filter tips (cellulose acetate); cotton strings; fiberboard squares) or mixed with a jel cleared under 40 CFR 180.920 or 180.950. * * * * *
[FR Doc. 04-9578 Filed 4-27-04; 8:45 am]
BILLING CODE 6560-50-S
