Powered Industrial Trucks; Request for information

Citation84 FR 8633
Record Number2019-04338
Published date11 March 2019
CourtLabor Department,Occupational Safety And Health Administration
Federal Register, Volume 84 Issue 47 (Monday, March 11, 2019)
[Federal Register Volume 84, Number 47 (Monday, March 11, 2019)]
                [Proposed Rules]
                [Pages 8633-8641]
                From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
                [FR Doc No: 2019-04338]
                =======================================================================
                -----------------------------------------------------------------------
                DEPARTMENT OF LABOR
                Occupational Safety and Health Administration
                29 CFR Parts 1910, 1915, 1917, 1918, and 1926
                [Docket No. OSHA-2018-0008]
                RIN 1218-AC99
                Powered Industrial Trucks; Request for information
                AGENCY: Occupational Safety and Health Administration (OSHA), Labor.
                ACTION: Request for Information (RFI).
                -----------------------------------------------------------------------
                SUMMARY: OSHA requests information and comment on issues related to
                requirements in the standards on powered industrial trucks for general,
                maritime, and construction industries. OSHA is seeking information
                regarding the types, age, and usage of powered industrial trucks,
                maintenance and retrofitting of powered industrial trucks, how to
                regulate older powered industrial trucks, the types of accidents and
                injuries associated with operation of powered industrial trucks, the
                costs and benefits of retrofitting powered industrial trucks with
                safety features, and the costs and benefits of all other components of
                a safety program, as well as various other issues. OSHA is also
                interested in understanding whether the differences between the
                standards for maritime, construction, and general industry are
                appropriate and effective for each specific industrial sector. OSHA
                will use the information received in response to this RFI to determine
                what action, if any, it may take to reduce regulatory burdens while
                maintaining worker safety.
                DATES: Submit comments and additional material on or before June 10,
                2019. All submissions must bear a postmark or provide other evidence of
                the submission date.
                ADDRESSES: Submit comments and additional materials, identified by
                Docket No. OSHA-2018-0008, by any of the following methods:
                 Electronically: Submit comments and attachments electronically at
                http://www.regulations.gov, which is the Federal eRulemaking Portal.
                Follow the instructions online for making electronic submissions.
                 Facsimile: OSHA allows facsimile transmission of comments and
                additional material that are 10 pages or fewer in length (including
                attachments). Send these documents to the OSHA Docket Office at (202)
                693-1648. OSHA does not require hard copies of these documents. Instead
                of transmitting facsimile copies of attachments that supplement these
                documents (for example, studies, journal articles), commenters must
                submit these attachments to the OSHA Docket Office, Room N-3653,
                Occupational Safety and Health Administration, U.S. Department of
                Labor, 200 Constitution Avenue NW, Washington, DC 20210. These
                attachments must identify clearly the commenter's name, the date of
                submission, the title of this RFI (Powered Industrial Trucks), and
                docket no. OSHA-2018-0008 so that the Docket Office can attach them to
                the appropriate document.
                 Regular mail, express mail, hand delivery, or messenger (courier)
                service: Submit comments and any additional material (for example,
                studies, journal articles) to the OSHA Docket Office, Docket No. OSHA-
                2018-0008 or RIN (1218-AC99), Room N-3653, Occupational Safety and
                Health Administration, U.S. Department of Labor, 200 Constitution
                Avenue NW, Washington, DC 20210; telephone: (202) 693-2350. (OSHA's TTY
                number is (877) 889-5627.) Contact the OSHA Docket Office for
                information about security procedures concerning delivery of materials
                by express mail, hand delivery, and messenger service. The hours of
                operation for the OSHA Docket Office are 10:00 a.m. to 3:00 p.m., ET.
                 Instructions: All submissions must include the agency's name, the
                title of this RFI (Powered Industrial Trucks), and the docket no. OSHA-
                2018-0008. OSHA will place comments and other material, including any
                personal information, in the public docket without revision, and these
                materials will be available online at http://www.regulations.gov.
                Therefore, OSHA cautions commenters about submitting statements they do
                not want made available to the public and submitting comments that
                contain personal information (either about themselves or others) such
                as Social Security numbers, birth dates, and medical data.
                 Docket: To read or download submissions or other material in the
                docket, go to http://www.regulations.gov or the OSHA Docket Office at
                the above address. The http://www.regulations.gov index lists all
                documents in the docket. However, some information (e.g., copyrighted
                material) is not available publicly to read or download through the
                website. All submissions, including copyrighted material, are available
                for inspection at the OSHA Docket Office. Contact the OSHA Docket
                Office for assistance in locating docket submissions.
                FOR FURTHER INFORMATION CONTACT: Press inquiries: Frank Meilinger,
                Director, OSHA Office of Communications; telephone: (202) 693-1999;
                email: [email protected].
                 General and technical information: Lisa Long, Director, Office of
                Engineering Safety, OSHA Directorate of Standards and Guidance;
                telephone: (202) 693-2222; fax: (202) 693-1663; email:
                [email protected].
                SUPPLEMENTARY INFORMATION:
                 Copies of this Federal Register notice: Electronic copies are
                available at http://www.regulations.gov. This Federal Register notice,
                as well as news releases and other relevant information, also are
                available at OSHA's web page at http://www.osha.gov.
                 References and Exhibits: Documents referenced by OSHA in this RFI,
                other than OSHA standards and Federal Register notices, are in Docket
                No. OSHA-2018-0008 (powered industrial trucks; request for
                information). The docket is available at http://www.regulations.gov,
                the Federal
                [[Page 8634]]
                eRulemaking Portal. For additional information on submitting items to,
                or accessing items in, the docket, please refer to the ADDRESSES
                section of this RFI. While most exhibits are available at http://www.regulations.gov, some information (e.g., copyrighted material) is
                not available to download from that web page. However, all materials in
                the docket are available for inspection at the OSHA Docket Office.
                Table of Contents
                I. Background
                 A. Introduction
                 B. Fatality and Injury Data
                 C. Regulatory History
                 1. General Industry
                 2. Shipyards, Longshoring, and Marine Cargo Handling
                 3. Construction
                II. Request for Information, Data, and Comments
                 A. General Issues
                 1. Types of Powered Industrial Trucks
                 2. Truck Operation, Maintenance, and Training
                 3. Incidents and Injuries
                 4. Consistency Among OSHA Standards
                 B. Consensus Standards
                 1. American National Standards Institute
                 2. National Fire Protection Association
                 3. Other Standards
                 C. Compliance Issues
                 D. Economic Issues
                 E. Other Comments/Suggestions/Concerns
                I. Background
                A. Introduction
                 OSHA is considering whether or not to initiate rulemaking to revise
                the powered industrial trucks standards for general, maritime, and
                construction industries (29 CFR 1910.178, 1915.120, 1917.43, 1918.65,
                and 1926.602(c), (d)). These regulations, promulgated in 1971 and
                updated in 1998, are intended to protect operators of these trucks and
                their coworkers. In this RFI, OSHA is seeking public comments that will
                inform OSHA on potential updates to the powered industrial trucks
                standards. The term ``powered industrial truck'' includes what are
                commonly termed forklifts, but the term also includes all fork trucks,
                tractors, platform lift trucks, motorized hand trucks, and other
                specialized industrial trucks powered by an electric motor or an
                internal combustion engine. The aim of this RFI is to seek public
                comment on what aspects of the powered industrial trucks standards are
                effective as well as those that may be outdated, inefficient,
                unnecessary, or overly burdensome, and how those provisions might be
                repealed, replaced, or modified while maintaining or improving worker
                safety.
                 OSHA's powered industrial trucks standards contain requirements for
                machine design and construction, locations of use, maintenance,
                training, and operations, among other requirements. OSHA initially
                adopted the powered industrial trucks standard (29 CFR 1910.178) on May
                29, 1971 (36 FR 10613), pursuant to section 6(a) of the Occupational
                Safety and Health Act of 1970 (OSH Act) (29 U.S.C. 651, 655),\1\ based
                on the 1969 editions of the American National Standards Institute's
                (ANSI) Safety Standard for Powered Industrial Trucks, B56.1, and the
                National Fire Protection Association's (NFPA) standard for Type
                Designation, Areas of Use, Maintenance and Operation of Powered
                Industrial Trucks, NFPA 505. Since the promulgation of OSHA's powered
                industrial trucks standard in 1971, these national consensus standards
                have been updated a number of times. The most recent edition of ANSI
                B56.1 was issued in 2018, in conjunction with the Industrial Truck
                Standards Development Foundation (ITSDF) (OSHA-2018-0008-0002). The
                most recent edition of NFPA 505 was issued in 2018 (OSHA-2018-0008-
                0003). OSHA has updated the powered industrial trucks standards only
                once, on December 1, 1998 (63 FR 66270), to revise the requirements for
                operator training codified at Sec. 1910.178(l) and to include
                references to Sec. 1910.178(l) in the standards for shipyards, marine
                terminals, longshoring, and construction (Sec. Sec. 1910.16, 1915.120,
                1917.1, 1918.1, and 1926.602(d)).\2\
                ---------------------------------------------------------------------------
                 \1\ Section 6(a) directed OSHA, during the first two years after
                the OSH Act became effective, to promulgate as an occupational
                safety and health standard any national consensus standard or any
                established Federal standard if such promulgation would improve
                employee safety or health.
                 \2\ See Docket OSHA-S008-2006-0639.
                ---------------------------------------------------------------------------
                 ANSI B56.1 defines the safety requirements relating to the elements
                of design, operation, and maintenance of powered industrial trucks.
                This national consensus standard has two basic parts. The first part
                establishes manufacturer requirements to ensure hazards do not result
                from the design and construction of powered industrial trucks at the
                time of manufacture. This includes a variety of test methods to
                determine load-handling capacity, which must also be indicated through
                appropriate markings. When OSHA originally promulgated the powered
                industrial trucks standard, the agency incorporated by reference the
                design requirements section of ANSI B56.1-1969.
                 The second part of B56.1 establishes guidelines for operators of
                industrial trucks, including requirements for operator qualifications
                and training, operator safety rules, and maintenance practices.
                Although OSHA did not incorporate by reference the ANSI B56.1-1969 user
                requirements in its powered industrial trucks standard, OSHA did base
                some of the provisions on this part of the ANSI standard. Throughout
                the years, ANSI/ITSDF has added other requirements to improve the
                safety of industrial truck operators and other employees. Examples of
                additions to the user requirements in B56.1 include:
                 A requirement that operator training programs cover
                hazards from carbon monoxide production by internal combustion engines
                and common initial symptoms of exposure.
                 A requirement that, prior to working on engine fuel
                systems of liquefied petroleum (LP) gas-powered trucks with engines
                that will not run, users must close the LP tank and vent fuel slowly in
                a non-hazardous area.
                 A requirement for stopping distances when descending
                grades. This section states that when descending a grade, required
                stopping distances must be greater and methods must be employed to
                allow for this condition. Such methods include: Reducing speed,
                limiting loads, and allowing for adequate clear space at the bottom of
                the grade.
                 A requirement to consider noise exposure of personnel in
                the work area.
                 A requirement regarding relocation of powered industrial
                trucks. This section states that when using lifting equipment such as
                elevators, cranes, ship hoisting gear, to relocate a powered industrial
                truck, the user shall ensure that the capacity of the hoisting
                equipment being used is not exceeded.
                 The NFPA 505 standard contains fire safety guidelines for powered
                industrial trucks including type designations, areas of use,
                conversions, maintenance, and operations. This standard is designed to
                mitigate potential fire and explosion hazards involving powered
                industrial trucks, including fork trucks, tractors, platform lift
                trucks, motorized hand trucks, and other specialized industrial trucks
                powered by electric motors or internal combustion engines.
                 When OSHA adopted the powered industrial trucks standard in 1971,
                there were 11 designated types of trucks.\3\
                [[Page 8635]]
                NFPA has since listed an additional eight truck types: CGH, CN, CNS,
                DX, G/CN, G/LP, GS/CNS, and GS/LPS.\4\ These are not listed in OSHA's
                standard. NFPA first added type designations G/LP and GS/LPS, which are
                both dual-fuel type trucks that operate on gasoline and/or liquefied
                petroleum gas. NFPA next added new truck type designation DX, which is
                a diesel-powered unit that is constructed to allow it to be used in
                atmospheres that contain specifically named flammable vapors, dust, and
                fibers. NFPA added a new section on compressed natural gas (CNG) that
                included the addition of type designations CN, CNS, G/CN, and GS/CNS,
                and made changes to the fuel handling and storage chapters for these
                trucks, as well as for the dual fuel and converted trucks. NFPA's most
                recent type designation is a compressed hydrogen-powered unit (CGH).
                ---------------------------------------------------------------------------
                 \3\ These 11 designations represent the following truck types:
                D-Diesel-powered unit; DS-Diesel-powered unit with additional
                safeguards to exhaust, fuel and electrical systems; DY-Diesel-
                powered unit with safe guards of DS unit and do not have any
                electrical equipment including the ignition system and have
                temperature limiting features; E-Electrically powered unit; ES-
                Electrical powered unit with additional safeguards to electrical
                systems to prevent hazardous sparks and limit surface temperatures;
                EE-Electrical powered unit with safeguards of ES units and all
                electric motors and electrical equipment enclosed; EX-Electrical
                powered unit that differs from E, ES and EE units that allows it to
                be used in certain atmospheres containing flammable vapors and dust;
                G-Gasoline powered unit; GS-Gasoline powered unit with additional
                safeguards to exhaust, fuel and electrical systems; LP-Liquefied
                Petroleum powered unit; LPS-Liquefied Petroleum powered unit with
                additional safeguards to exhaust, fuel and electrical systems.
                 \4\ These eight designations are: CGH-Compressed hydrogen-
                powered unit utilizing a fuel cell that has minimum acceptable
                safeguards against inherent fire and electrical shock hazards; CN-
                Compressed natural gas-powered unit that has minimum acceptable
                safeguards against inherent fire hazards; CNS-Compressed natural
                gas-powered unit that, in addition to meeting the requirements for
                Type CN units, is provided with additional safeguards to the
                exhaust, fuel, and electric systems; DX-Diesel-powered unit in which
                the diesel engine and the electric fittings and equipment are
                designed, constructed, and assembled in such a way that the unit can
                be used in atmospheres that contain specifically named flammable
                vapors, dusts, and, under certain conditions, fibers; G/CN-Gasoline
                or compressed natural gas unit that has minimum acceptable
                safeguards against inherent fire hazards; G/LP-Gasoline or liquefied
                petroleum gas and has minimum acceptable safeguards against inherent
                fire hazards; GS/CNS-Gasoline or compressed natural gas unit and, in
                addition to meeting all the requirements for G/CN units, is provided
                with additional safeguards to the exhaust, fuel, and electric
                systems; GS/LPS-Gasoline or liquefied petroleum gas unit and, in
                addition to meeting all the requirements for the G/LP units, is
                provided with additional safeguards to the exhaust, fuel, and
                electric systems.
                ---------------------------------------------------------------------------
                 These eight type-designated units--CGH, CN, CNS, DX, G/CN, G/LP,
                GS/CNS, GS/LPS--have different requirements for safe operation,
                maintenance, and handling due to their fuel source, but they are
                generally the same in design and function as the 11 truck types
                currently listed in OSHA's standard. For instance, the chapter in NFPA
                505 for fuel handling and storage prohibits over-pressurizing fuel
                cylinders and requires that pressure relief devices be free of plugging
                and maintained in good operating condition; these requirements are not
                reflected in OSHA's current standard.
                 OSHA requests information from the public on the powered industrial
                trucks standards to help the agency determine how to best protect
                employees who use powered industrial trucks and eliminate unnecessary
                burdens. OSHA is seeking public comments on whether and how the powered
                industrial trucks standards should be amended.
                B. Fatality and Injury Data
                 Statistics show that, in some instances, powered industrial trucks
                cause worker fatalities and injuries. Accordingly, OSHA is considering
                ways to maintain or improve worker safety while modernizing its
                standards and reducing any overly-burdensome requirements.
                 Data from the Bureau of Labor Statistics (BLS) (OSHA-2018-0008-
                0004) for the years 2011 through 2016 indicate a total of 1,357
                fatalities resulting from the use of powered material hauling and
                transport industrial vehicles and tractors. As shown in Table 1, the
                annual number of fatalities ranged from 218 to 241, with an annual
                average of 226 fatalities. The data show that the majority of these
                fatalities, 1,169 (89 percent), occurred in five industry sectors:
                Agriculture, forestry, fishing, and hunting (788); manufacturing (126);
                construction (94); wholesale trade (83); and transportation and
                warehousing (78). Nearly all the fatalities, 1,316 (97 percent),
                occurred during the use of powered forklifts, order pickers, platform
                trucks, tractors, and power take-offs.
                 With respect to injury data, BLS reports that, for the three most
                recent years with complete results from the BLS surveillance system
                (2014-2016), lost-workday injuries resulting from incidents associated
                with powered industrial forklifts, trucks, and tractors ranged from
                11,790 cases (2016) to 11,940 cases (2015) and averaged 11,857
                cases.\5\ Over 90 percent of cases during this three-year period
                involved powered industrial material hauling and transport vehicles.
                The remainder involved tractors and power take-offs.
                ---------------------------------------------------------------------------
                 \5\ US Dept. of Labor, Bureau of Labor Statistics, Nonfatal
                cases involving days away from work: Selected characteristics (2011
                forward), 2011-2016, https://www.bls.gov/iif/ (accessed January 23,
                2018).
                ---------------------------------------------------------------------------
                 OSHA's data from the Severe Injury Reports (SIRs) mirror that of
                BLS. The SIRs recorded 1,238 incidents from January 1, 2015, through
                February 28, 2017, resulting in 1,123 hospitalizations and 193
                amputations. Approximately 97 percent of the 1,238 incidents involved
                powered forklifts, order pickers, platform trucks, pallet jacks,
                airport utility vehicles, and other powered industrial material hauling
                and transport vehicles, not elsewhere classified, while the remainder
                involved tractors and power take-offs.\6\
                ---------------------------------------------------------------------------
                 \6\ U.S. Dept. of Labor, Occupational Safety and Health
                Administration, Severe Injury Reports, https://www.osha.gov/severeinjury/index.html (accessed January 18, 2018).
                ---------------------------------------------------------------------------
                BILLING CODE 4510-26-P
                [[Page 8636]]
                [GRAPHIC] [TIFF OMITTED] TP11MR19.025
                [[Page 8637]]
                [GRAPHIC] [TIFF OMITTED] TP11MR19.026
                [[Page 8638]]
                BILLING CODE 4510-26-C
                C. Regulatory History
                1. General Industry
                 As previously noted, in June 1971, OSHA adopted the powered
                industrial trucks standard, 29 CFR 1910.178, implementing several
                measures to encourage worker safety. As part of that rulemaking, and
                under section 6(a) of the Act, OSHA codified ANSI B56.1-1969, Safety
                Standard for Powered Industrial Trucks, including the provisions
                covering operator training.
                 On December 1, 1998 (63 FR 66270), after notice and comment
                rulemaking, OSHA published a final rule updating the provisions
                covering powered industrial truck operator training, which was codified
                at 29 CFR 1910.178(l). These provisions mandate a training program that
                bases the amount and type of training required on the operator's prior
                knowledge and skill; the types of powered industrial trucks the
                operator will operate in the workplace; the hazards present in the
                workplace; and the operator's demonstrated ability to operate a powered
                industrial truck safely. Refresher training is required if the operator
                is involved in an accident or a near-miss incident; the operator has
                been observed operating the vehicle in an unsafe manner; the operator
                has been determined during an evaluation to need additional training;
                there are changes in the workplace that could affect safe operation of
                the truck; or the operator is assigned to operate a different type of
                truck. Evaluations of each operator's performance are required as part
                of the initial and refresher training and each operator's performance
                must be evaluated at least once every three years. These training
                requirements apply to all industries (general industry, construction,
                shipyards, marine terminals, and longshoring operations) that use
                powered industrial trucks, except agricultural operations.
                 Since the 1998 final rule on powered industrial truck operator
                training, OSHA has not revised the general industry powered industrial
                truck requirements or updated references to the national industry
                consensus standard (B56.1) to include newer versions of that standard.
                2. Shipyards, Longshoring, and Marine Cargo Handling
                 In 1974, pursuant to Section 41 of the Longshore and Harbor
                Workers' Compensation Act, the Secretary issued the existing shipyards
                and longshoring regulations (39 FR 22074, June 19, 1974). These
                regulations appear at 29 CFR part 1915 for shipyards and 29 CFR part
                1918 for longshoring. Because the OSH Act comprehensively covers most
                private employers, the longshoring standards also were applied to
                shoreside cargo handling operations (i.e. marine terminal operations)
                at 29 CFR part 1917. In addition, in accordance with 29 CFR
                1910.5(c)(2), OSHA applied the general industry standards to shoreside
                activities not covered by the older longshoring rules. Under section
                1910.5(c)(2), a general industry standard covering a hazardous
                condition applies to shoreside activities not covered by a specific
                standard addressing that hazard. Shipyards are covered by the general
                industry standard.
                 On July 5, 1983 (48 FR 30886), OSHA published the final standard
                for marine terminals (29 CFR part 1917). This rule was intended to
                further address the shoreside segment of marine cargo handling (29 CFR
                1917.27). The marine terminals standard includes requirements for
                powered industrial trucks at 29 CFR 1917.43.
                 On July 25, 1997, OSHA published a final rule revising the marine
                terminals standard (29 CFR part 1917) and the longshoring standard (29
                CFR part 1918), and improving the training requirements for powered
                industrial truck operators in the marine cargo handling industries (62
                FR 40142). Then, on December 1, 1998 (63 FR 66238), OSHA adopted a
                final rule for shipyard employment (29 CFR 1915.120), Powered
                Industrial Truck Operator Training, which set forth training
                requirements applicable to shipyard employment identical to the
                requirements in the general industry powered industrial truck training
                standard at 29 CFR 1910.178(l).
                3. Construction
                 In 1971, under section 6(a) of the OSH Act, the Secretary of Labor
                adopted the existing Federal standards that had been issued under the
                Contract Work Hours and Safety Standards Act as OSHA construction
                standards (36 FR 7340, April 17, 1971). The provisions pertaining to
                powered industrial trucks used in construction are contained at 29 CFR
                1926.602(c). Paragraph 1926.602(c)(1)(vi) states:
                 All industrial trucks in use shall meet the applicable
                requirements of design, construction, stability, inspection,
                testing, maintenance, and operation, as defined in American National
                Standards Institute B56.1-1969, Safety Standards for Powered
                Industrial Trucks.
                 Thus, by incorporating by reference the same 1969 ANSI standard
                that was the source document for the general industry standard at 29
                CFR 1910.178, the powered industrial truck construction standard
                imposes the identical powered industrial truck requirements on the
                construction industry as applied to general industry.
                 On December 1, 1998, 29 CFR part 1926 was amended by adding a new
                paragraph (d), which provides the same powered industrial truck
                operator training requirements for construction work as adopted at 29
                CFR 1910.178(l) for general industry.
                II. Request for Information, Data, and Comments
                 OSHA is seeking information, data, and comments (information),
                including information on anticipated costs, cost savings, and benefits
                related to the questions below, that will inform the agency's analysis
                of technological and economic feasibility and will help determine what
                action, if any, should be taken to repeal, replace or modify outdated,
                unnecessary or overly burdensome aspects of the powered industrial
                trucks standard while maintaining or improving worker safety. OSHA is
                providing the following questions to facilitate responses to this RFI,
                but commenters may supply other information pertaining to the RFI not
                explicitly solicited by the questions. When responding, please
                reference the specific question number that you are responding to,
                provide a detailed response, explain the reasons behind your views,
                and, if possible, identify, and provide relevant information on which
                you rely, including, but not limited to, data, studies, and articles.
                Throughout this RFI, OSHA requests economic data on issues such as
                current practices and compliance resource expenditures. In your
                response, please provide details on your establishment including number
                of employees and categories of employee occupations; industry
                identification (by North American Industrial Classification System 6-
                digit code if available); and the primary types of goods or services
                produced by your company. This information will help OSHA develop a
                more accurate analysis of the impacts of any potential rule. OSHA will
                carefully review and evaluate the information, data, and comments
                received in response to this Federal Register notice to decide on an
                appropriate course of action.
                A. General Issues
                1. Types of Powered Industrial Trucks
                 OSHA's current powered industrial trucks standards list 11
                different types of powered industrial trucks, while NFPA 505-2018 lists
                19 different types of powered industrial trucks (the ANSI B56.1
                standard does not list types of
                [[Page 8639]]
                powered industrial trucks). OSHA is considering adding these eight new
                truck types to modernize its standard and improve worker safety. The
                eight new truck types not currently listed in OSHA's powered industrial
                trucks standards are:
                 CGH: Compressed hydrogen-powered unit utilizing a fuel
                cell that has minimum acceptable safeguards against inherent fire and
                electrical shock hazards.
                 CN: Compressed natural gas-powered unit that has minimum
                acceptable safeguards against inherent fire hazards.
                 CNS: Compressed natural gas-powered unit that, in addition
                to meeting the requirements for Type CN units, is provided with
                additional safeguards to the exhaust, fuel, and electric systems;
                 DX: Diesel-powered unit in which the diesel engine and the
                electric fittings and equipment are designed, constructed, and
                assembled in such a way that the unit can be used in atmospheres that
                contain specifically named flammable vapors, dusts, and, under certain
                conditions, fibers.
                 G/CN: Gasoline or compressed natural gas unit that has
                minimum acceptable safeguards against inherent fire hazards.
                 G/LP: Gasoline or liquefied petroleum gas unit that has
                minimum acceptable safeguards against inherent fire hazards;
                 GS/CNS: Gasoline or compressed natural gas unit and, in
                addition to meeting all the requirements for G/CN units, is provided
                with additional safeguards to the exhaust, fuel, and electric systems.
                 GS/LPS: Gasoline or liquefied petroleum gas unit and, in
                addition to meeting all the requirements for the G/LP units, is
                provided with additional safeguards to the exhaust, fuel, and electric
                systems.
                 (a) Please provide OSHA with data on characteristics such as usage,
                specifications, capacity, function, ages, and lifespans of trucks in
                your fleet for the 19 truck types listed in the NFPA standard. Please
                include information on the number of each type of truck you use, the
                number of employees assigned to operate these trucks, and for what
                activities each type of truck is used.
                 (b) In addition to these 19 truck types, should OSHA consider
                including any other types of powered industrial trucks in a future OSHA
                standard? What would be the basis for inclusions, given that those
                types are not currently in NFPA 505-2018?
                 (c) How commonly used are the eight powered industrial truck types
                identified in NFPA 505-2018 but not in OSHA's current standard?
                 (d) In the Supporting Statement for the 2017 Information Collection
                Request of the standard on powered industrial trucks (29 CFR 1910.178)
                (Office of Management and Budget (OMB) Control No. 1218-0242 (September
                2017)), OSHA estimated that 1.8 million workers operate 1.2 million
                trucks within all affected establishments in construction, general
                industry, longshoring, marine terminals, and shipyards.\7\ Do these
                estimates accurately reflect the current number of workers and trucks
                affected by the standard on powered industrial trucks in general
                industry (29 CFR 1910.178)? If not, should the number of workers and
                trucks be adjusted up or down and by how much?
                ---------------------------------------------------------------------------
                 \7\ Docket Exhibit OSHA-2011-0062-0009, Document ID 0009, p. 5,
                https://www.regulations.gov/document?D=OSHA-2011-0062-0009. As
                reported in that document (2017 ICR supporting statement), ``In
                1998, OSHA published a final rule in which it revised the operator
                training requirements specified by paragraph (l) of the Standard
                (see 63 FR 66238). As part of this rulemaking, the agency performed
                a Final Economic Analysis (FEA) (see 63 FR 66262). Using data from
                the FEA for the burden hour and cost estimates described below, OSHA
                finds that the Standard applies to employers using an estimated
                1,210,679 powered industrial trucks operated by about 1,816,018
                workers.''
                ---------------------------------------------------------------------------
                2. Truck Operations, Maintenance, and Training
                 (a) Do you perform training in-house or contract out to
                specialists?
                 (b) If you provide training in-house, do you purchase training
                modules or develop your own?
                 (c) Who actually provides the training (e.g., supervisor, safety
                and health specialist)?
                 (d) Is your current training limited to truck operations and
                maintenance or do you manage a broad occupational safety and health
                training program that includes training on trucks? For all of your
                workplace safety and health training programs, please provide details
                on length, frequency, scope, and types of technical resources deployed
                (e.g., DVDs, online courses, hands-on training, computer simulation or
                robotics).
                 (e) Are OSHA's current training requirements adequate or excessive?
                If not adequate, what modifications or additional requirements should
                OSHA consider? If excessive, what requirements are unnecessary or
                overly burdensome?
                 (f) Does your workplace have a training program that you think is
                more effective than that required by the OSHA standard?
                 (g) Please share the aspects of the program in your workplace that
                you recommend OSHA consider and provide any data to support its
                effectiveness.
                 (h) Are you using any powered industrial truck aftermarket
                equipment, such as a back-up camera or perimeter sensor alarm? Is such
                equipment effective in reducing accidents?
                 (i) What number or percentage of powered industrial trucks in use
                have rollover protection or enclosures?
                 (j) Can powered industrial trucks without rollover protection be
                retrofitted? If so, how, and what is your estimate of that cost?
                 (k) How often do you inspect your powered industrial trucks? Please
                describe your inspection procedures and provide any checklists that are
                used.
                3. Incidents and Injuries
                 (a) What are the most common types of workplace incidents and
                injuries involving powered industrial trucks that have occurred in your
                facility or industry (e.g., rollovers, struck by, falling off docks)?
                 (b) What are the most common causes of hazardous incidents
                involving powered industrial trucks (please specify those factors)?
                Please provide case reports, redacted data, or aggregated data, and
                information quantifying and describing such incidents.
                 (c) Which activities involving powered industrial trucks result in
                the most incidents (e.g., loading, unloading, traveling, backing up)?
                 (d) Do more incidents occur with older equipment? If so, please
                provide detailed information on why the older equipment is more
                hazardous.
                 (e) Do incidents vary by type of industrial truck, and if so, how?
                4. Consistency Among OSHA Standards
                 (a) If OSHA determines that it is necessary to revise the general
                industry standard, how should the agency consider revising the maritime
                and construction powered industrial trucks standards?
                 (b) Should OSHA's maritime and construction standards be identical
                or, at least, substantially similar to the general industry standard?
                 (c) Are there differences specific to the maritime and construction
                industries that should be addressed through different requirements?
                [[Page 8640]]
                B. Consensus Standards
                1. American National Standards Institute
                 As previously stated, OSHA's standards addressing powered
                industrial trucks reference ANSI B56.1, developed in 1969. However,
                this consensus standard has been updated several times since then with
                the latest version published in 2018 (ANSI/ITSDF B56.1a).
                 (a) Do the requirements in the 2018 edition of ANSI/ITSDF B56.1a
                adequately protect workers operating powered industrial trucks?
                 (b) What requirements, if any, are missing from this ANSI standard
                that would ensure safety for employees during powered industrial truck
                operations?
                 (c) Does compliance with ANSI/ITSDF B56.1a-2018 address most
                hazards commonly encountered with powered industrial trucks and is it
                better or preferable than the existing OSHA regulation? Please explain.
                 (d) Are there any hazards not addressed by ANSI/ITSDF B56.1a-2018?
                 (e) Are there any requirements in ANSI/ITSDF B56.1a-2018 that
                reduce worker safety?
                2. National Fire Protection Association
                 The National Fire Protection Association standard (NFPA 505-2018)
                is the fire safety standard for powered industrial trucks and covers
                truck types, designations, areas of use, maintenance, and operation of
                powered industrial trucks.
                 (a) Does compliance with the NFPA standard ensure that workers are
                protected from hazards associated with the operation of powered
                industrial trucks, or are there additional procedures OSHA should
                consider?
                 (b) Are employers currently in compliance with this consensus
                standard? If not, what provisions are employers not following? Why?
                3. Other Standards
                 Are there other standards OSHA should consider or use if the agency
                determines it is necessary to revise its powered industrial trucks
                standards?
                C. Compliance Issues
                 (a) If OSHA decides to revise the standards based on the most
                recent ANSI and NFPA standards, what requirements, if any, in ANSI/
                ITSDF B56.1a-2018 and NFPA 505-2018 would make it difficult or
                impossible for older equipment to be in compliance?
                 (b) If OSHA revises the standards on powered industrial trucks,
                should OSHA consider grandfathering in powered industrial trucks
                manufactured before a certain date and, if so, what date would that be?
                Please provide your reasoning for that date.
                 (c) Would it be appropriate for grandfathering dates to vary for
                different types of truck?
                 (d) If OSHA decides to consider grandfathering older equipment, is
                there a future date OSHA should set beyond which the ``grandfathered''
                clause (or safe harbor) should not apply?
                 (e) How many older powered industrial trucks are you using? What
                type of trucks are these and what do you use them for?
                 (f) How many powered industrial trucks do you use that do not have
                seat belts?
                 (g) Can any of these trucks be retrofitted with seat belts? If so,
                how, and what is your estimate of that cost?
                 (h) What is the average life span of a powered industrial truck?
                D. Economic Issues
                 (a) Please describe in detail any provision of the current standard
                that you believe is outdated, unnecessary, or ineffective; or imposes
                costs that exceed benefits. Please provide information supporting your
                view, including data, studies, and articles.
                 (b) To what extent do employers already comply with the current
                ANSI consensus standard (ANSI/ITSDF B56.1a-2018)? Are there situations
                where equipment could be easily retrofitted to meet the requirements
                contained in the revised consensus standard ANSI/ITSDF B56.1a-2018?
                Please include information on the type of vehicle and modifications
                necessary, including how much time is required to perform the
                retrofitting, the type of worker who could do the retrofitting, and the
                cost of equipment needed for the vehicle modification or the cost to
                contract out the work.
                 (c) What are the baseline practices in your industry with respect
                to complying with the provisions of consensus standards relating to
                training, operation, maintenance, or work practices?
                 (d) Is there older equipment that cannot be updated without
                significant cost, and what factors would contribute to the costs of
                retrofitting or augmenting older equipment to achieve compliance with
                ANSI/ITSDF B56.1a-2018? Please specify the types of costs (i.e., labor,
                materials, equipment, and consultant fees) that affected employers
                would incur to comply with ANSI/ITSDF B56.1a-2018 and the costs per
                unit (e.g., worker, machinery, energy). If a new OSHA standard required
                changes that applied to older powered industrial trucks, at what cost
                of compliance expense would it be more cost effective simply to replace
                older trucks with newer ones?
                 (e) If OSHA incorporated the requirements of NFPA 505-2018 into its
                standards and applied it to older powered industrial trucks, would
                employers retrofit or augment their older trucks, or replace them with
                already-compliant trucks?
                 (f) Are there particular impacts on small entities from a revision
                to the powered industrial trucks standards that references current
                consensus standards, including ANSI/ITSDF B56.1a--2018?
                 (g) Would small entities face economic or technological feasibility
                challenges to comply with revised standards that reference current
                consensus standards?
                 (h) Do you identify as a small entity in your industry? If so, what
                is the basis for that identification (for example, reliance on Small
                Business Administration size standards)? If you are uncertain as to
                your qualifications as a small entity, please provide details on your
                establishment size in terms of number of employees and categories of
                employee occupations; industry identification (by North American
                Industrial Classification System 6-digit code, if available); and the
                primary types of goods or services produced by your company.
                 (i) Please describe in detail the technical or financial concerns
                that employers encounter when implementing or planning the
                implementation of safety programs for powered industrial trucks.
                 (l) OSHA requests comments, particularly from small entities, on
                current practices with respect to safe handling and operation of
                powered industrial trucks. Please identify the practices that are
                critical to safe handling and operation of powered industrial trucks
                (i.e., those practices whose absence would significantly compromise the
                safety of employees). Please discuss the role of employee training in
                your safety programs involving powered industrial trucks and the
                perceived benefits of employee training. Where possible, please
                estimate the cost per employee for any component of your safety
                programs involving powered industrial trucks.
                E. Other Comments/Suggestions/Concerns
                 OSHA invites interested persons--including employers, trade
                associations, workers, worker organizations, and public health and
                safety organizations--to submit information, comments, data, studies,
                and other materials on the
                [[Page 8641]]
                issues and questions in this RFI. In particular, OSHA invites comment
                on specific issues and requests information and data about practices at
                affected establishments in general industry, construction, shipyard
                employment, and marine cargo handling. When submitting comments in
                response to questions or issues raised or revisions that OSHA is
                considering, OSHA requests that you explain your rationale and, if
                possible, provide data and information to support your comments and
                recommendations.
                Authority and Signature
                 Loren Sweatt, Acting Assistant Secretary of Labor for Occupational
                Safety and Health, authorized the preparation of this notice pursuant
                to 29 U.S.C. 653,655, and 657, Secretary's Order 1-2012 (77 FR 3912;
                Jan. 25, 2012), and 29 CFR part 1911.
                 Signed at Washington, DC, on March 5, 2019.
                Loren Sweatt,
                Acting Assistant Secretary of Labor for Occupational Safety and Health.
                [FR Doc. 2019-04338 Filed 3-8-19; 8:45 am]
                BILLING CODE 4510-26-P
                

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT