Repair Stations; Withdrawal

Federal Register: May 7, 2009 (Volume 74, Number 87)

Proposed Rules

Page 21287-21290

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

DOCID:fr07my09-19

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration 14 CFR Part 145

Docket No. FAA-2006-26408

RIN 2120-AI53

Repair Stations; Withdrawal

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM); withdrawal.

SUMMARY: The FAA is withdrawing a previously published NPRM that proposed to revise the system of ratings and require repair stations to establish a quality program. The NPRM also proposed to require each repair station to maintain a capability list, designate a chief inspector, and have permanent housing for facilities, equipment, materials, and personnel. The proposal would have specified additional instances where the FAA may deny a repair station certificate, and clarified some existing repair station regulations.

Page 21288

We are withdrawing the NPRM because we have determined that it does not adequately address the current repair station environment, and because of the significant issues commenters raised.

DATES: The proposed rule published on December 1, 2006 (71 FR 70254), is withdrawn as of May 7, 2009.

FOR FURTHER INFORMATION CONTACT: George W. Bean, Repair Station Branch,

AFS-340, Federal Aviation Administration, 955 L'Enfant Plaza, SW.,

Washington, DC 20024; telephone 202-385-6405; facsimile (202) 385-6474, e-mail george.w.bean@faa.gov.

SUPPLEMENTARY INFORMATION:

Background

In 1989, the FAA held four public meetings to provide a forum for the public to comment on possible revisions to the rules governing repair stations.

After considering the comments and data collected from these meetings, the FAA published the Repair Stations notice of proposed rulemaking (NPRM) in June 1999.\1\ Subsequently, in August 2001, the

FAA published the Repair Stations; final rule with request for comments and direct final rule with request for comments; final rule.\2\ The FAA requested comments on the paperwork burden and on removing appendix A

\3\ from part 145, which the FAA had not originally proposed.

\1\ 64 FR 33142; June 21, 1999.

\2\ 66 FR 41088; August 6, 2001.

\3\ This Appendix set forth job functions and equipment requirements for repair stations.

On October 19, 2001, the FAA tasked the Aviation Rulemaking

Advisory Committee (ARAC) to address ratings and quality assurance for repair stations.\4\ ARAC provided its recommendations in May 2002.\5\

\4\ 66 FR 53281; October 19, 2001.

\5\ http://www.faa.gov/regulations_policies/rulemaking/ committees/arac/.

On December 1, 2006, the FAA published the NPRM entitled Repair

Stations \6\ that considered ARAC's recommendations. The comment period closed on March 1, 2007. However, the FAA received a request from the

Aeronautical Repair Station Association (ARSA) to extend the comment period. In a notice published in the Federal Register on February 27, 2007, the FAA granted a 45-day comment period extension to April 16, 2007.\7\

\6\ 71 FR 70254; December 1, 2006.

\7\ 72 FR 8641; February 27, 2007.

The December 1, 2006 NPRM, applicable to repair station operators and applicants, proposed the following changes to part 145:

Repair stations would establish and maintain a capability list of all articles for which they are rated. The list would identify each article by manufacturer and the type, make, model, category or other nomenclature designated by the article's manufacturer. Repair stations with an Avionics or a Component rating would be required to organize their lists by category of the article.

The FAA would revise the ratings and classes that may be issued to a certificated repair station. The proposed amendments included ones that would discontinue the issuance of limited ratings, and instead allow issuance of limitations to the rating the certificated repair station holds.

The FAA would require repair stations to establish a quality system that includes an internal evaluation system that reviews the complete repair station once a year.

Applicants for a repair station certificate would include a letter of compliance as part of their application.

A certificate holder would be required to provide permanent housing for its facilities, equipment, materials, and personnel.

Certificate holders would be required to designate a chief inspector.

The FAA would use certification from an authority

``acceptable to the FAA'' as a basis for issuing a certificate to a person located outside the United States.

The FAA would identify reasons it could use to deny the issuance of a repair station certificate.

Discussion of Comments

The FAA received more than 500 comments to the NPRM. While there was general support for the need to revise the repair station rules, several commenters asked us to withdraw the rule. Many other commenters expressed concerns related to ratings (particularly avionics rating), capability list, quality system, letter of compliance, chief inspector, housing and facilities, the FAA's denial of a repair station certificate, and some were out of scope.

Requests To Withdraw the NPRM

The ARSA, Aircraft Electronics Association (AEA), AGC Incorporated,

Spirit Avionics, Ltd., Temple Electronics Company, and Lynden Air Cargo recommended withdrawal of the rule. While ARSA commended the FAA for attempting to clarify and simplify the rating system, it suggested the

FAA issue a supplemental notice of proposed rulemaking that considers the comments to the NPRM. The other commenters recommended withdrawal because there has been too much regulation of repair stations within the past few years.

Oversight and Inconsistent Application

Comments received from the International Brotherhood of Teamsters,

Professional Airways Systems Specialists, and Transportation Trades

Department generally support the proposal. The unions did argue, however, that the agency did not go far enough in certain areas involving oversight and surveillance. While the issues they raised were outside the scope of the proposal, various legislative proposals under consideration by the Congress may address these issues in the future.

Ratings

Several commenters, including Southern Avionics & Communications,

Executive AutoPilots, Inc., Genesis Aviation, Aircom Avionics, American

Airlines, Turbine Weld, Inc., and others, expressed general disapproval of the proposed rating system.

Spirit Avionics, Ltd., believes to combine the proposed new avionics rating with current market forces will negatively affect the ability of avionics-only repair stations to remain viable. The commenter said the NPRM does not recognize that avionics service facilities are transitioning to flight line repairs and avionics upgrades as main sources of revenue. The commenter also said the NPRM does not recognize that avionics repair stations' ability to perform such services are based primarily on the avionics equipment onboard the aircraft rather than on the type, make, or model of the aircraft.

Midcoast Aviation said while it believes including electrical equipment as part of an avionics rating to be appropriate, it does not see legitimacy in removing those [electrical] systems/components from the aircraft or powerplant rating.

Goodrich Aviation Technical Services said the proposed rule does not adequately define the type of work required for the avionics rating. It said a repair station with an aircraft, powerplant, or propeller rating should not be required to obtain a separate avionics rating to maintain articles associated with its ratings and capabilities. Midcoast Aviation commented similarly.

Spirit Avionics, Ltd., and Griffin Avionics, Inc., commented the change from an airframe to an aircraft rating is ambiguous and completely unnecessary. These commenters argued that this change is unwarranted and would result in dramatic increases in administrative costs, without improving aircraft maintenance safety or capability.

ARSA said since all ratings would require a capabilities list under the

Page 21289

proposal, there does not appear to be a need for class ratings. It also said it does not agree with the limitations of some of the ratings or the proposed requirement for capabilities listing. Other commenters expressed a similar disagreement with the limitations and privileges of some ratings, stating the limitations do not appear consistent.

Capability List

Eighteen commenters, including Chromalloy Connecticut, Southern

Avionics and Communication, Avionics Shop, Inc., Turbine Weld, Inc.,

Association of Asia Pacific Airlines, National Air Transportation

Association (NATA), and others, stated strong opposition to the proposed capability list requirement. These commenters expressed concern that the proposed requirement would cause chaos and bankruptcy.

They said such requirements are not justified, are unnecessary, are irrelevant, and are economically punitive, without offering further safety benefits.

Boeing believes the capability list would require a significant amount of administrative resources to be kept current and would require excessive amounts of information to be documented and tracked, particularly for larger repair stations. Boeing sees minimal to no safety benefits from these proposed requirements.

Airbus believes the requirement for a capability list is implicitly included in Sec. 145.211. While it fully understands the need for a standardized format for such a list, the details as proposed in Sec. 145.215 seem to go beyond a practical documentation under an approved system.

A number of commenters, including United Airlines, Turbine Weld,

Inc., Griffin Avionics, Inc., AEA, and Temple Electronics Company object to the proposed capability list because it could require having several hundred types of ratings attached to a single repair station aircraft rating.

Quality System

ARSA commented that the majority of repair stations have not instituted quality assurance systems and most do not use computers.

Therefore, reviewing, changing, and maintaining the proposed quality system would be expensive. Also, ARSA said repair stations cannot be held responsible for compliance with all part 145 regulations. But, can be held accountable only for ensuring compliance with those requirements under their specific responsibility and control.

AEA and Temple Electronics Company believe the stated benefit of the quality system requirements is based on ``false premises'' because the FAA cited different cost-benefit estimates in prior repair station rules. They commented that the FAA removed the quality assurance requirements proposed in the 1999 NPRM from the subsequent 2001 final rule because the requirements were overly burdensome and not cost effective. The commenters further said that, despite removal of these requirements from the 2001 final rule, the FAA introduced similar requirements in the 2006 NPRM, without taking time to assess whether the prior rule had proven successful.

Spirit Avionics, Ltd., Weld Avionics, Inc., Southern Avionics &

Communications, Executive AutoPilots, Inc., Vero Beach Avionics, Inc.,

Aircraft Owners and Pilots Association, and two individual commenters said if a repair station properly performs maintenance according to

FAA-approved processes, maintaining a Quality Assurance System would be extremely burdensome and would have little merit.

Letter of Compliance

ARSA, AEA, Temple Electronics Company, and Aeropro, Inc., said a mandatory Letter of Compliance would be burdensome, unnecessary, and redundant. AEA said the letter is a carryover from the period when the repair station manual was simply a statement of commitment to comply with the regulations. Aeropro, Inc., commented that because something has been a long standing practice is not sufficient reason to include it as a mandatory provision in the rule. It said including language similar to that in Sec. 119.35, for certificate applications, would be more appropriate.

Chief Inspector

ARSA asked the FAA to withdraw the proposed requirement for a chief inspector, unless the agency can provide a specific definition of the position and justify the position's expenses against an increase in safety. Similarly, Aerospace Industries Association of America commented that its member companies cannot support the proposed requirement to create a chief inspector post in every repair station.

The NPRM does not clearly define the functional responsibilities, accountability, and authority of the position, nor are the benefits of having such a position clearly defined.

Several other commenters, including Chromalloy Gas Turbine Corp.,

Boeing, TCI Inc., Aeropro, Inc., British Airways, Vero Beach Avionics,

Inc., Marshall Aerospace, and several individual commenters expressed support for the above sentiments.

Housing and Facilities

The NATA, Midcoast Aviation, and Spirit Avionics, Ltd., said if the aircraft and personnel are protected during the repair or maintenance process, there is no need to build or lease an expensive hangar, which may prove to be financially unsound.

United Airlines and Islip Avionics, Inc., disagreed with the proposed permanent housing provision. They said they disagreed because not all repair or maintenance work requires a fully enclosed facility as some operations can be performed at the maintenance terminal, instead of at the hangar. Also, they said that some repair stations are located at airports that are publicly owned.

General Electric Company, Aviation Services, Boeing, and Aerospace

Industries commented that repair stations holding aircraft ratings with limitations must not be subject to the undue burden of obtaining permanent housing. These commenters said the housing requirements should be in line with the appropriate ratings limitations.

Denial of a Repair Station Certificate

Aviation Services, Inc., (ASI) does not agree that a person who has had a repair station certificate revoked and met the other applicable conditions should be permanently ineligible for issuance of a repair station certificate, as proposed in Sec. 145.53. ASI expressed concern that the primary basis for the FAA's proposed permanent revocation is based on one incident that ASI believes is not representative. It said if a permanent revocation is appropriate, it should apply only to repair stations that perform work for persons who operate under parts 121 and 135.

Aviation Suppliers Association (ASA), AEA, Temple Electronics

Company, and Aeropro, Inc., believe proposed Sec. 145.53(c) would apply overly severe punishment. AEA and Temple Electronics Company suggested that any revocation should be bound by some time frame and should be included as part of the enforcement action that revoked the certificate.

An individual commenter said, while the rule punishes inappropriate behavior, it does little to positively reinforce the safety culture created and sustained by top management.

Reason for Withdrawal

We are withdrawing the December 2006 Repair Station NPRM because it does not adequately address the current

Page 21290

repair station operating environment. Also, we are withdrawing it because of the many significant issues commenters to the NPRM raised, which the FAA needs to consider in developing a better proposal.

The current NPRM is based on recommendations developed in 2001 by

ARAC. At that time, air carriers performed the majority of their maintenance work in-house. Since then, air carriers have increasingly contracted their maintenance. According to an analysis by the Office of

Inspector General in 2003, the nine major air carriers were contracting 34 percent of their heavy airframe maintenance checks to repair stations. By 2007, this figure had increased to 71 percent.\8\ The NPRM as written does not address this changing operational dynamic.

\8\ Air Carriers' Outsourcing of Aircraft Maintenance, OIG

Report Number: AV-2008-090, September 30, 2008--http:// www.oig.dot.gov/item.jsp?id=2364.

In their comments to the NPRM, many small repair station operators said the proposal takes a ``one-size-fits-all'' approach. This approach, they argue, does not adequately address the operational differences between large and small repair stations. As a result, the commenters said, the NPRM would place a substantial economic and administrative burden on their operations.

Many commenters, as noted in the Discussion of Comments section of this document, argued against adopting key portions of the NPRM for a variety of reasons. Several commenters asked us to withdraw the NPRM in its entirety. For the reasons we have discussed, we believe the best course of action is to withdraw the NPRM. Withdrawal will give us time to thoroughly review and properly address the substantial changes in the repair station operating environment and the many issues raised by commenters.

Conclusion

Withdrawal of the December 1, 2006, Repair Stations; Proposed Rule does not preclude the FAA from issuing another proposal on the subject.

In fact, we have initiated rulemaking to update and revise the regulations for repair stations to more fully address the significant changes in the repair station business model. The new proposed rule will address concerns from the 2006 NPRM, as well as other issues related to bringing the repair station regulations up-to-date with industry practice. The public will be provided the opportunity for public comment on this rulemaking through the NPRM process.

Issued in Washington, DC, on April 30, 2009.

Chester D. Dalbey,

Deputy Director, Flight Standards Service.

FR Doc. E9-10638 Filed 5-6-09; 8:45 am

BILLING CODE 4910-13-P

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT