Revisions to the Unregulated Contaminant Monitoring Rule (UCMR 4) for Public Water Systems and Announcement of Public Meeting

As Enacted ( Federal Register)

Cited authorities 5

Cited in

Federal Register, Volume 81 Issue 244 (Tuesday, December 20, 2016)

Federal Register Volume 81, Number 244 (Tuesday, December 20, 2016)

Rules and Regulations

Pages 92666-92692

From the Federal Register Online via the Government Publishing Office www.gpo.gov

FR Doc No: 2016-30469

-----------------------------------------------------------------------

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 141

EPA-HQ-OW-2015-0218; FRL-9956-71-OW

RIN 2040-AF49

Revisions to the Unregulated Contaminant Monitoring Rule (UCMR 4) for Public Water Systems and Announcement of Public Meeting

AGENCY: Environmental Protection Agency (EPA).

ACTION: Final rule; notice of public meeting.

-----------------------------------------------------------------------

SUMMARY: The U.S. Environmental Protection Agency (EPA) is finalizing a Safe Drinking Water Act (SDWA) rule that requires public water systems to collect occurrence data for contaminants that may be present in drinking water but are not yet subject to EPA's drinking water standards set under the SDWA. This rule identifies eleven analytical methods to support water system monitoring for a total of 30 chemical contaminants, consisting of nine cyanotoxins and one cyanotoxin group; two metals; eight pesticides plus one pesticide manufacturing byproduct (hereinafter collectively referred to as ``pesticides''); three brominated haloacetic acid disinfection byproduct groups; three alcohols; and three semivolatile organic chemicals. EPA is also announcing a public meeting and webinar to discuss the implementation of the fourth Unregulated Contaminant Monitoring Rule.

DATES: This final rule is effective on January 19, 2017, 30 days after publication in the Federal Register. The incorporation by reference of certain publications listed in the regulations is approved by the Director of the Federal Register as of January 19, 2017.

ADDRESSES: The EPA has established a docket for this action under Docket ID No. EPA-HQ-OW-2015-0218. All documents in the docket are listed on the http://www.regulations.gov Web site. Although listed in the index, some information is not publicly available, e.g., confidential business information (CBI) or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, is not placed on the Internet and will be publicly available only in hard copy form. Publicly available docket materials are available electronically through http://www.regulations.gov.

FOR FURTHER INFORMATION CONTACT: Brenda D. Parris, Standards and Risk Management Division (SRMD), Office of Ground Water and Drinking Water (OGWDW) (MS 140), Environmental Protection Agency, 26 West Martin Luther King Drive, Cincinnati, OH 45268; telephone number: (513) 569-

7961; or email address: parris.brenda@epa.gov; or Melissa Simic, SRMD, OGWDW (MS 140), Environmental Protection Agency, 26 West Martin Luther King Drive, Cincinnati, Ohio 45268; telephone number: (513) 569-7864; or email address: simic.melissa@epa.gov. For general information, contact the Safe Drinking Water Hotline. Callers within the United States can reach the Hotline at (800) 426-4791. The Hotline is open Monday through Friday, excluding federal holidays, from 10:00 a.m. to 4:00 p.m., eastern time. The Safe Drinking Water Hotline can also be found on the Internet at: http://www.epa.gov/ground-water-and-drinking-water/safe-drinking-water-hotline.

SUPPLEMENTARY INFORMATION:

Table of Contents

General Information
1. Does this action apply to me?
2. What action is the Agency taking and why?
3. What is the Agency's authority for taking this action?
4. What is the estimated cost of this action?
5. What is the applicability date?
Background
1. How has EPA implemented the Unregulated Contaminant Monitoring Program?
2. How are the Contaminant Candidate List, the UCMR program, the Regulatory Determination process and the NCOD interrelated?
What are the key requirements of the rule, including notable changes between UCMR 3, the proposed UCMR 4 and the final UCMR 4?
1. What contaminants are in UCMR 4?
  1. This Rule
  2. Summary of Major Comments and EPA Responses
2. What are the UCMR 4 sampling design and timeline of activities?
  1. Sampling Frequency, Timing
    1. This Rule
    2. Summary of Major Comments and EPA Responses
  2. Phased Sample Analysis for Microcystins
    1. This Rule
    2. Summary of Major Comments and EPA Responses
  3. Applicability of HAA Monitoring Requirements
    1. This Rule
    2. Summary of Major Comments and EPA Responses
  4. Representative Sampling
    1. This Rule
    2. Summary of Major Comments and EPA Responses
    Page 92667
  5. Sampling Locations
    1. This Rule
    2. Summary of Major Comments and EPA Responses
3. What are the reporting requirements for UCMR 4?
  1. Data Elements
  1. This Rule
  2. Summary of Major Comments and EPA Responses
How are laboratories approved for UCMR 4 monitoring?
1. Request To Participate
2. Registration
3. Application Package
4. EPA's Review of Application Packages
5. Proficiency Testing
6. Written EPA Approval
What is the past and future stakeholder involvement in the regulation process?
1. What is the states' role in the UCMR program?
2. What stakeholder meetings have been held in preparation for UCMR 4?
3. How do I participate in the upcoming stakeholder meeting?
  1. Meeting Participation
  2. Meeting Materials
4. How did EPA consider Children's Environmental Health?
5. How did EPA address Environmental Justice?
What documents are being incorporated by reference?
1. Methods From the U.S. Environmental Protection Agency
2. Methods From American Public Health Association--Standard Methods (SM)
  1. Standard Methods for the Examination of Water and Wastewater
  2. Standard Methods Online
3. Methods From ASTM International
Statutory and Executive Order Reviews
1. Executive Order 12866: Regulatory Planning and Review and Executive Order 13563: Improving Regulation and Regulatory Review
2. Paperwork Reduction Act (PRA)
3. Regulatory Flexibility Act (RFA)
4. Unfunded Mandates Reform Act (UMRA)
5. Executive Order 13132: Federalism
6. Executive Order 13175: Consultation and Coordination With Indian Tribal Governments
7. Executive Order 13045: Protection of Children From Environmental Health Risks and Safety Risks
8. Executive Order 13211: Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution or Use
National Technology Transfer and Advancement Act and 1 CFR Part 51
1. Executive Order 12898: Federal Actions To Address Environmental Justice in Minority Populations and Low-Income Populations
2. Congressional Review Act (CRA)
References

Abbreviations and Acronyms

microg/L Microgram per liter

Adda (2S,3S,8S,9S,4E,6E)-3-amino-9-methoxy-2,6,8-trimethyl-10-

phenyl-4,6-decadienoic acid

ASDWA Association of State Drinking Water Administrators

ASTM ASTM International

CAS Chemical Abstract Service

CBI Confidential Business Information

CCC Continuing Calibration Check

CCL Contaminant Candidate List

CFR Code of Federal Regulations

CRA Congressional Review Act

CWS Community Water System

D/DBPRs Disinfectants and Disinfection Byproducts Rules (including Stage 1 and Stage 2 D/DBPRs)

ELISA Enzyme-linked Immunosorbent Assay

EPA United States Environmental Protection Agency

EPTDS Entry Point to the Distribution System

ESI Electrospray Ionization

FR Federal Register

GC Gas Chromatography

GC/ECD Gas Chromatography/Electron Capture Detection

GC/MS Gas Chromatography/Mass Spectrometry

GW Ground Water

GWUDI Ground Water Under the Direct Influence of Surface Water

HAAs Haloacetic Acids

HAA5 Dibromoacetic Acid, Dichloroacetic Acid, Monobromoacetic Acid, Monochloroacetic Acid, Trichloroacetic Acid

HAA6Br Bromochloroacetic Acid, Bromodichloroacetic Acid, Dibromoacetic Acid, Dibromochloroacetic Acid, Monobromoacetic Acid, Tribromoacetic Acid

HAA9 Bromochloroacetic Acid, Bromodichloroacetic Acid, Chlorodibromoacetic Acid, Dibromoacetic Acid, Dichloroacetic Acid, Monobromoacetic Acid, Monochloroacetic Acid, Tribromoacetic Acid, Trichloroacetic Acid

IC Ion Chromatography

IC-MS/MS Ion Chromatography-Tandem Mass Spectrometry

IC/ESI-MS/MS Ion Chromatography/Electrospray Ionization/Tandem Mass Spectrometry

ICP-MS Inductively Coupled Plasma-Mass Spectrometry

ICR Information Collection Request

IDC Initial Demonstration of Capability

IS Internal Standard

LFB Laboratory Fortified Blank

LRB Laboratory Reagent Blank

LC/ESI-MS/MS Liquid Chromatography/Electrospray Ionization/Tandem Mass Spectrometry

LC-MS/MS Liquid Chromatography/Tandem Mass Spectrometry

LT2 Long Term 2 Enhanced Surface Water Treatment Rule

M Million

MAC Mycobacterium Avium Complex

MRL Minimum Reporting Level

NAICS North American Industry Classification System

NARA National Archives and Records Administration

NCOD National Contaminant Occurrence Database

NPDWRs National Primary Drinking Water Regulations

NTNCWS Non-transient Non-community Water System

OGWDW Office of Ground Water and Drinking Water

OMB Office of Management and Budget

PA Partnership Agreement

PRA Paperwork Reduction Act

PT Proficiency Testing

PWS Public Water System

PWSID Public Water System Identification

QC Quality Control

QCS Quality Control Sample

QHS Quality HAA Sample

RFA Regulatory Flexibility Act

SBA Small Business Administration

SDWA Safe Drinking Water Act

SDWARS Safe Drinking Water Accession and Review System

SDWIS/Fed Federal Safe Drinking Water Information System

SM Standard Methods for the Examination of Water and Wastewater

SMP State Monitoring Plan

SOP Standard Operating Procedure

SPE Solid Phase Extraction

SR Source Water

SRF Drinking Water State Revolving Fund

SRMD Standards and Risk Management Division

SUR Surrogate Standard

SVOCs Semivolatile Organic Chemicals

SW Surface Water

TNCWS Transient Non-community Water System

TOC Total Organic Carbon

UCMR Unregulated Contaminant Monitoring Rule

UMRA Unfunded Mandates Reform Act of 1995

USEPA United States Environmental Protection Agency
General Information
1. Does this action apply to me?
  
  The fourth Unregulated Contaminant Monitoring Rule (UCMR 4) applies to public water systems (PWSs). PWSs are systems that provide water for human consumption through pipes, or other constructed conveyances, to at least 15 service connections or that regularly serve an average of at least 25 individuals daily at least 60 days out of the year. This rule applies to all large community and non-transient non-community water systems (NTNCWSs) serving more than 10,000 people. A community water system (CWS) is a PWS that has at least 15 service connections used by year-round residents or regularly serves at least 25 year-round residents. A NTNCWS is a PWS that is not a CWS and that regularly serves at least 25 of the same people over six months per year. Some examples of NTNCWS are schools, factories, office buildings and hospitals, which have their own water systems. EPA selects the nationally representative sample of small CWSs and NTNCWSs serving 10,000 or fewer people that are required to monitor (see
  
  Page 92668
  
  ``Statistical Design and Sample Selection for the Unregulated Contaminant Monitoring Regulation'' (USEPA, 2001a) for a description of the statistical approach for the nationally representative sample). This rule does not apply to transient non-community water systems (TNCWSs) (i.e., non-community water systems that do not regularly serve at least 25 of the same people over six months per year). A TNCWSs provides water in a place such as a gas station or campground, where people do not remain for long periods of time.
  
  States, territories and tribes with primary enforcement responsibility (primacy) to administer the regulatory program for PWSs under the SDWA can participate in the implementation of UCMR 4 through Partnership Agreements (PAs). Primacy agencies with PAs can choose to be involved in various aspects of the UCMR 4 monitoring for the PWSs they oversee; however, the PWS remains responsible for compliance with the rule requirements. Examples of potentially regulated categories and entities are identified in the following table.
  
  ------------------------------------------------------------------------
  
  Examples of potentially
  
  Category regulated entities NAICS \a\
  
  ------------------------------------------------------------------------
  
  State, local & tribal States, local and 924110
  
  governments. tribal governments
  
  that analyze water
  
  samples on behalf of
  
  PWSs required to
  
  conduct such analysis;
  
  states, local and
  
  tribal governments
  
  that directly operate
  
  CWSs and NTNCWSs
  
  required to monitor.
  
  Industry....................... Private operators of 221310
  
  CWSs and NTNCWSs
  
  required to monitor.
  
  Municipalities................. Municipal operators of 924110
  
  CWSs and NTNCWSs
  
  required to monitor.
  
  ------------------------------------------------------------------------
  
  \a\ NAICS = North American Industry Classification System.
  
  This table is not intended to be exhaustive, but rather provides a guide for readers regarding entities likely to be regulated by this action. This table summarizes the types of entities that EPA is aware could potentially be regulated by this action. If you are uncertain whether your entity is regulated by this action, carefully examine the definition of a PWS found in Sec. Sec. 141.2 and 141.3, and the applicability criteria found in Sec. 141.40(a)(1) and (2) of Title 40 in the Code of Federal Regulations (CFR). If you have questions, please consult the contacts listed in the preceding FOR FURTHER INFORMATION CONTACT section.
2. What action is the Agency taking and why?
  
  This final rule requires PWSs to analyze drinking water samples for 29 unregulated contaminants that do not have health based standards set under the SDWA, as well as one group of regulated contaminants (described in section I.C), and to report their results to EPA. This is the fourth national monitoring effort under the UCMR program, and builds upon the framework established under the prior three UCMR actions (see section II.A). The monitoring provides data to inform future regulatory actions to protect public health.
  
  The public benefits from the information about whether or not unregulated contaminants are present in their drinking water. If contaminants are not found, consumer confidence in their drinking water will improve. If contaminants are found, illnesses may be avoided when subsequent actions, such as regulations, reduce or eliminate those contaminants.
3. What is the Agency's authority for taking this action?
  
  As part of its responsibilities under the SDWA, EPA implements section 1445(a)(2), ``Monitoring Program for Unregulated Contaminants.'' This section, as amended in 1996, requires that once every five years, beginning in August 1999, EPA issue a list of no more than 30 unregulated contaminants to be monitored by PWSs. The list can include contaminants included in previous UCMR cycles but will generally focus on contaminants not yet monitored under UCMR. SDWA section 1445(g)(7) requires that EPA enter the monitoring data into the Agency's publicly-available National Contaminant Occurrence Database (NCOD). The SDWA also requires that EPA ensures that systems serving a population larger than 10,000 people, as well as a nationally representative sample of PWSs serving 10,000 or fewer people, monitor for the unregulated contaminants. EPA must vary the frequency and schedule for monitoring based on the number of persons served, the source of supply, and the contaminants likely to be found. EPA is using this authority as the basis for monitoring 29 of the 30 contaminants.
  
  Section 1445(a)(1)(A) of the SDWA, as amended in 1996, requires that every person who is subject to any SDWA requirement establish and maintain such records, make such reports, conduct such monitoring and provide such information as the Administrator may reasonably require by regulation to assist the Administrator in establishing SDWA regulations. Pursuant to this provision, EPA can also require the monitoring of contaminants already subject to EPA's drinking water standards. EPA is using this authority as the basis for monitoring one of the chemical groups (Haloacetic Acids 5 (HAA5)) under this rule. Sample collection and analysis for HAA5 can be done concurrently with the unregulated HAA monitoring (for HAA6Br and HAA9) described in section III.B.3 (resulting in no significant additional burden since all three HAA groups can be measured by a single method) and will allow EPA to better understand co-occurrence between regulated and unregulated disinfection byproducts.
  
  Hereinafter, all 30 chemicals/groups are collectively referred to as ``contaminants.''
4. What is the estimated cost of this action?
  
  EPA estimates the total average national cost of this action will be $24.3 million per year from 2017-2021. EPA has documented the assumptions and data sources used in the preparation of this estimate in the Information Collection Request (ICR) (USEPA, 2016a). EPA identified eleven analytical methods (nine EPA-developed analytical methods and two alternate, equivalent, consensus organization-developed methods) to analyze samples for 30 UCMR 4 contaminants. EPA's estimate of the analytical cost for the UCMR 4 contaminants and related indicators is $2,500 per sample set. EPA calculated these costs by summing the laboratory unit cost of each method.
  
  Small PWSs selected for UCMR 4 monitoring sample an average of 6.7 times per PWS (i.e., number of responses per PWS) across the three-year ICR period. The estimated labor burden per response for small PWSs is 2.8 hours. Large PWSs and very large PWSs sample and report an average of 11.4 and 14.1 times per PWS, respectively, across the three-year ICR period. The estimated labor burden per
  
  Page 92669
  
  response for large and very large PWSs is 6.1 and 9.9 hours, respectively.
  
  Exhibit 1 presents a breakdown of estimated annual average national costs. Estimated PWS (i.e., large and very large) and EPA costs reflect the analytical cost (i.e., non-labor) for all UCMR 4 methods as well as labor-related cost. EPA pays for the analytical costs for all systems serving a population of 10,000 or fewer people. Laboratory analysis and sample shipping account for approximately 79% of the total national cost for UCMR 4 implementation. EPA estimated laboratory unit costs based on consultations with multiple commercial drinking water laboratories. The cost of the laboratory methods includes shipping the sample from the facility to the laboratory as part of the cost for the analysis.
  
  EPA expects that states will incur labor costs associated with voluntary assistance with UCMR 4 implementation. EPA estimated state costs using the relevant assumptions from the State Resource Model, which was developed by the Association of State Drinking Water Administrators (ASDWA) (ASDWA, 2013) to help states forecast resource needs. Model estimates were adjusted to account for actual levels of state participation under UCMR 3. State participation is voluntary; thus, the level of effort is expected to vary among states and will depend on their individual agreements with EPA.
  
  Additional details regarding EPA's cost assumptions and estimates can be found in the ``Information Collection Request for the Unregulated Contaminant Monitoring Rule (UCMR 4)'' (USEPA, 2016a) EPA ICR Number 2192.08, which presents estimated cost and burden for the 2017-2019 period, consistent with the 3-year timeframe for ICRs. Estimates of costs over the entire 5-year UCMR 4 period of 2017-2021 are attached as an appendix to the ICR. Specifically, most of the burden is incurred in the second, third and fourth year (i.e., monitoring and sample analysis) of the UCMR 4 monitoring period. The first year (the planning year) involves a lesser burden, and the final fifth year involves the least burden since the program is concluding. The next ICR period will overlap with the last two years of the 5-year UCMR 4 period, and therefore will have substantially lower figures.
  
  Copies of the ICR and its appendix are available in the EPA public docket for this final rule, under Docket ID No. EPA-HQ-OW-2015-0218. The total estimated annual costs (labor and non-labor) are as follows:
  
  Exhibit 1--Estimated Average Annual Costs of UCMR 4
  
  ------------------------------------------------------------------------
  
  Avg. annual
  
  cost all
  
  Respondent respondents
  
  (2017-2021) \1\
  
  ------------------------------------------------------------------------
  
  Small Systems (25-10,000), including labor \2\ only $0.2 M
  
  (non-labor costs \3\ paid for by EPA).................
  
  Large Systems (10,001-100,000), including labor and non- 15.0 M
  
  labor costs...........................................
  
  Very Large Systems (100,001 and greater), including 4.1 M
  
  labor and non-labor costs.............................
  
  States, including labor costs related to implementation 0.5 M
  
  coordination..........................................
  
  EPA, including labor for implementation and non-labor 4.5 M
  
  for small system testing..............................
  
  ----------------
  
  Average Annual National Total...................... 24.3 M
  
  ------------------------------------------------------------------------
  
  \1\ Totals may not equal the sum of components due to rounding.
  
  \2\ Labor costs pertain to systems, states and EPA. Costs include
  
  activities such as reading the rule, notifying systems selected to
  
  participate, sample collection, data review, reporting and record
  
  keeping.
  
  \3\ Non-labor costs will be incurred primarily by EPA and by very large
  
  and large PWSs. They include the cost of shipping samples to
  
  laboratories for testing and the cost of the laboratory analyses.
5. What is the applicability date?
  
  The determination of whether a PWS is required to monitor under UCMR 4 is based on the type of system (e.g., CWS, NTNCWS, etc.) and its retail population served, as indicated by the Federal Safe Drinking Water Information System (SDWIS/Fed) inventory on December 31, 2015. SDWIS/Fed can be accessed at http://www.epa.gov/ground-water-and-drinking-water/safe-drinking-water-information-system-sdwis-federal-reporting. If a PWS believes its retail population served in SDWIS/Fed is inaccurate, the system should contact its state to verify its population as of the applicability date and request a correction, if necessary. The 5-year UCMR 4 program will take place from January 2017 through December 2021, with sample collection occurring between January 1, 2018, and December 31, 2020.
Background
1. How has EPA implemented the Unregulated Contaminant Monitoring program?
  
  EPA published the list of contaminants for the first UCMR (UCMR 1) in the Federal Register (FR) on September 17, 1999 (64 FR 50556, (USEPA, 1999)), the second UCMR (UCMR 2) on January 4, 2007 (72 FR 368, (USEPA, 2007)) and the third UCMR (UCMR 3) on May 2, 2012 (77 FR 26072, (USEPA, 2012a)). EPA established a three-tiered approach for monitoring contaminants under the UCMR program. Assessment Monitoring for ``List 1'' contaminants typically relies on analytical methods, techniques or technologies that are in common use by drinking water laboratories. Screening Survey monitoring for ``List 2'' contaminants typically relies on newer techniques or technologies that are not as commonly used, such that laboratory capacity to perform List 2 analyses may be limited. Finally, Pre-Screen Testing for ``List 3'' contaminants is often associated with techniques or technologies that are very recently developed and/or are particularly complex. In addition to method cost and complexity and laboratory capacity, EPA considers sampling frequency and the relevant universe of PWSs when deciding which of the three tiers is appropriate for the monitoring of a contaminant.
  
  EPA designed the Assessment Monitoring sampling approach (USEPA, 2001a) to ensure that sample results would yield a high level of confidence and a low margin of error. The design for a nationally representative sample of small systems called for the sample set to be stratified by water source type (ground water (GW) or surface water (SW)), service size category and state (where each state is allocated a
  
  Page 92670
  
  minimum of two systems in its state monitoring plan (SMP)).
  
  This final action identifies 30 List 1 contaminants to be measured during Assessment Monitoring from 2018-2020, with pre-monitoring activity in 2017 and post-monitoring activity in 2021. EPA developed this rule after considering input from public comments. For more information on EPA's response to public comments, please see section III.
2. How are the Contaminant Candidate List, the UCMR program, the Regulatory Determination process and the NCOD interrelated?
  
  Under the 1996 amendments to the SDWA, Congress established a stepwise, risk-based approach for determining which contaminants would become subject to drinking water standards. Under the first step, EPA is required to publish, every five years, a list of contaminants that are not yet regulated but which are known or anticipated to occur in PWSs; this is known as the Contaminant Candidate List (CCL). Under the second step, EPA must require, every five years, monitoring of up to 30 unregulated contaminants (many of which have been selected from the CCL for the UCMR monitoring to-date) to determine their occurrence in drinking water systems; this is known as the UCMR program. Under the third step, EPA is required to determine, every five years, whether or not to begin the process of developing a national primary drinking water regulation for at least five CCL contaminants; this is known as a Regulatory Determination and involves evaluating the following questions:
  
  (1) May the contaminant have an adverse effect on human health?
  
  (2) Is the contaminant known to occur or substantially likely to occur in PWSs with a frequency and at levels of public health concern?
  
  (3) In the sole judgement of the Administrator, does regulation of such contaminants present a meaningful opportunity for risk reduction for people served by PWSs?
  
  Finally, the SDWA requires EPA to issue national primary drinking water regulations (NPDWRs) for contaminants the Agency determines should be regulated.
  
  The CCL process identifies contaminants that may require regulation, while the UCMR program helps provide the data necessary for the Regulatory Determination process previously outlined. The data collected through the UCMR program are stored in the drinking water NCOD to facilitate analysis and review of contaminant occurrence, and support the Administrator's determination on whether regulation of a contaminant is in the public health interest, as required under SDWA section 1412(b)(1). UCMR results can be viewed by the public at: http://www.epa.gov/dwucmr. PWSs are also responsible for addressing UCMR results in their annual Consumer Confidence Reports, consistent with prior UCMR cycles and as required by Sec. 141.153.
What are the key requirements of the rule, including notable changes between UCMR 3, the proposed UCMR 4 and the final UCMR 4?

EPA published ``Revisions to the Unregulated Contaminant Monitoring Rule (UCMR 4) for Public Water Systems and Announcement of a Public Meeting;'' Proposed Rule, on December 11, 2015 (80 FR 76897, (USEPA, 2015a)). The UCMR 4 proposal identified eleven new analytical methods to support water system monitoring for a total of 30 new contaminants, and detailed other potential changes relative to UCMR 3. Among the other changes reflected in the UCMR 4 proposal were identification of water systems subject to UCMR 4 and provisions for sampling locations, timeframe and frequency, as well as updated data elements.

EPA received input on the UCMR 4 proposal from 34 public commenters, including state and local government, utilities and utility stakeholder organizations, laboratories, academia, non-governmental organizations and other interested stakeholders . After considering the comments, EPA made the changes described in Exhibit 2 to develop the final UCMR 4 action. Sections III A-C summarize key aspects of this final rule and the associated notable and recurring comments received in response to the proposed rule. EPA has compiled all public comments and EPA's responses in the ``Response to Comments Document for the Unregulated Contaminant Monitoring Rule (UCMR 4),'' (USEPA, 2016b), which can be found in the electronic docket listed in the ADDRESSES section of this notice.

Exhibit 2--Notable Changes to UCMR 4 Between Proposed and Final Rule

----------------------------------------------------------------------------------------------------------------

CFR rule section

---------------------------------------------------------- Description of change Corresponding preamble

No. Title/description section

----------------------------------------------------------------------------------------------------------------

Sec. 141.40(a)(3)............... Related Revises Table 1 to include III.A. & III.B.

specifications for EPA Method 546 Enzyme-

the analytes to be linked Immunosorbent

monitored. Assay (ELISA) and removes

source water as a sample

location for cyanotoxins.

Sec. 141.40(a)(3) and Sec. Sampling design Revises Table 1 to update III.B. & I.E.

141.40(a)(4). requirements--freque the monitoring dates to

ncy. January 2018 through

December 2020 for the 20

additional contaminants,

and also updates Table 2

to reflect the

traditional sample

collection timeframe

(consecutive 12-month

period) for the 20

additional contaminants.

Additionally, updates

Table 2 to reflect the

traditional sample

collection frequency

(four consecutive

quarters for SW and

ground water under the

direct influence of

surface water (GWUDI)

water systems, and twice,

5-7 months apart, for GW

systems) for those 20

contaminants.

Sec. 141.40(a)(3) and Sec. Phased sample Removes source water III.B.2

141.40(a)(4). analysis for samples from the phased

microcystins. sample analysis for

microcystins.

Sec. 141.40(a)(3)............... Applicability of HAA Removes UCMR 4 HAA III.B.3

monitoring requirement for water

requirements. systems that are not

subject to HAA5

monitoring under the

Disinfectants and

Disinfection Byproduct

Rules (D/DBPRs).

Page 92671

Sec. 141.35(e).................. Reporting Updates and clarifies data III.C.

requirements--Data elements to address

elements. disinfecting and

treatment types, and adds

data elements to account

for the metadata

collected for the

cyanotoxins.

----------------------------------------------------------------------------------------------------------------
1. What contaminants are in UCMR 4?
  1. This Rule
    
    EPA is maintaining the proposed list of unregulated contaminants and the methods associated with analyzing those contaminants, with the exception of updating the ELISA method for ``total microcystins'' (see Exhibit 3). Further information on the prioritization process, as well as contaminant-specific information (source, use, production, release, persistence, mobility, health effects and occurrence) that EPA used to select the contaminants is contained in ``UCMR 4 Contaminants--
    
    Information Compendium for Final Rule'' (USEPA, 2016c). This Information Compendium can be found in the electronic docket listed in the ADDRESSES section of this notice.
  2. Summary of Major Comments and EPA Responses
    
    Commenters who expressed an opinion about the proposed UCMR 4 analytes were generally supportive. Some commenters suggested alternative ways to collect the HAA information. Suggestions included collecting results for all nine HAAs individually; only collecting results for HAA9; or doing targeted research studies of HAAs independent of UCMR. EPA has concluded that monitoring for the three HAA groups (HAA5, HAA6Br and HAA9) will provide the information of interest on the relative occurrence between regulated and unregulated HAAs as well as brominated versus chlorinated HAAs. Though the targeted research proposed by some commenters is beyond the scope of today's action, EPA will take the recommendation under advisement and consider how such research may complement the UCMR data.
    
    Some commenters supported EPA's proposal to not include Legionella pneumophila and Mycobacterium avium Complex (MAC) in UCMR 4; others encouraged EPA to add Legionella, and in some cases MAC. The latter commenters identified several candidate methods, suggested that Legionella is not exclusively a premise plumbing issue, and pointed to concerns with health effects. While EPA recognizes the Legionella concern, the Agency has concluded that this national survey will not be able to adequately address many of the variables, complexities and uncertainties discussed by commenters. More research is needed to identify the optimal sampling location, frequency of sampling events and proper sampling population, and address biofilms and associated indicators. Further research is also needed on the dose-response ecology of Legionella in the distribution system to identify the correct method needed to monitor at a level that would be instructive and cost effective.
    
    Multiple commenters expressed concerns with the ELISA methodology and some of the specific elements of the ELISA Standard Operating Procedure (SOP) (Ohio EPA, 2015) identified in the proposal for cyanotoxins. In 2016, EPA finalized EPA Method 546: ``Determination of Total Microcystins and Nodularins in Drinking Water and Ambient Water by Adda Enzyme-Linked Immunosorbent Assay'' as the prescribed method for total microcystins (USEPA, 2016e). The fundamentals of Method 546 are quite similar to those of the Ohio EPA methodology, and Method 546 addresses concerns expressed about minimum reporting levels (MRLs), holding times and quality control.
    
    Exhibit 3--30 UCMR 4 Analytes
    
    ------------------------------------------------------------------------
    
    ------------------------------------------------------------------------
    
    List 1 Analytes
    
    ------------------------------------------------------------------------
    
    One Cyanotoxin Group using EPA Method 546 (Adda ELISA): 1
    
    ------------------------------------------------------------------------
    
    ``total microcystins''.
    
    ------------------------------------------------------------------------
    
    Seven Cyanotoxins using EPA Method 544 (SPE LC-MS/MS): 2
    
    ------------------------------------------------------------------------
    
    microcystin-LA. microcystin-RR.
    
    microcystin-LF. microcystin-YR.
    
    microcystin-LR. nodularin.
    
    microcystin-LY. ............................
    
    ------------------------------------------------------------------------
    
    Two Cyanotoxins using EPA Method 545 (LC/ESI-MS/MS): 3
    
    ------------------------------------------------------------------------
    
    anatoxin-a. cylindrospermopsin.
    
    Two Metals using EPA Method 200.8 (ICP-MS) 4 or alternate SM 5 or ASTM:
    
    6
    
    ------------------------------------------------------------------------
    
    germanium. manganese.
    
    ------------------------------------------------------------------------
    
    Nine Pesticides using EPA Method 525.3 (SPE GC/MS): 7
    
    ------------------------------------------------------------------------
    
    alpha-hexachlorocyclohexane. profenofos.
    
    chlorpyrifos. tebuconazole.
    
    dimethipin. total permethrin (cis- &
    
    trans-).
    
    ethoprop. tribufos.
    
    Page 92672
    
    oxyfluorfen. ............................
    
    ------------------------------------------------------------------------
    
    Three Brominated HAA Groups using EPA Method 552.3 (GC/ECD) or 557 (IC/
    
    ESI-MS/MS): 8 9 10
    
    ------------------------------------------------------------------------
    
    HAA5. HAA9.
    
    HAA6Br. ............................
    
    ------------------------------------------------------------------------
    
    Three Alcohols using EPA Method 541 (GC/MS): 11
    
    ------------------------------------------------------------------------
    
    1-butanol. 2-propen-1-ol.
    
    2-methoxyethanol. ............................
    
    ------------------------------------------------------------------------
    
    Three Semivolatile Organic Chemicals (SVOCs) using EPA Method 530 (GC/
    
    MS): 12
    
    ------------------------------------------------------------------------
    
    butylated hydroxyanisole. quinolone.
    
    o-toluidine. ............................
    
    ------------------------------------------------------------------------
    
    \1\ EPA Method 546 Adda Enzyme-Linked Immunosorbent Assay (ELISA)
    
    (USEPA, 2016e).
    
    \2\ EPA Method 544 (Solid phase extraction (SPE) liquid chromatography/
    
    tandem mass spectrometry (LC-MS/MS)) (USEPA, 2015b). This method will
    
    only be used if analyses by ELISA (for ``total microcystins'') yield
    
    results above reporting limits.
    
    \3\ EPA Method 545 (Liquid chromatography/electrospray ionization/tandem
    
    mass spectrometry (LC/ESI-MS/MS)) (USEPA, 2015c).
    
    \4\ EPA Method 200.8 (Inductively coupled plasma mass spectrometry (ICP-
    
    MS)) (USEPA, 1994).
    
    \5\ Standard Methods (SM) 3125 (SM, 2005a) or SM 3125-09 (SM Online,
    
    2009).
    
    \6\ ASTM International (ASTM) D5673-10 (ASTM, 2010).
    
    \7\ EPA Method 525.3 (SPE Gas chromatography/mass spectrometry (GC/MS))
    
    (USEPA, 2012b).
    
    \8\ EPA Method 552.3 (Gas chromatography/electron capture detection (GC/
    
    ECD)) (USEPA, 2003) and EPA Method 557 (Ion chromatography-
    
    electrospray ionization-tandem mass spectrometry (IC-ESI-MS/MS))
    
    (USEPA, 2009a). HAA5 includes: Dibromoacetic acid, dichloroacetic
    
    acid, monobromoacetic acid, monochloroacetic acid, trichloroacetic
    
    acid. HAA6Br includes: Bromochloroacetic acid, bromodichloroacetic
    
    acid, dibromoacetic acid, chlorodibromoacetic acid, monobromoacetic
    
    acid, tribromoacetic acid. HAA9 includes: Bromochloroacetic acid,
    
    bromodichloroacetic acid, chlorodibromoacetic acid, dibromoacetic
    
    acid, dichloroacetic acid, monobromoacetic acid, monochloroacetic
    
    acid, tribromoacetic acid, trichloroacetic acid.
    
    \9\ Regulated HAAs (HAA5) are included in the monitoring program to gain
    
    a better understanding of co-occurrence with currently unregulated
    
    disinfection byproducts.
    
    \10\ Brominated HAA monitoring also includes sampling for indicators
    
    total organic carbon (TOC) and bromide using methods approved for
    
    compliance monitoring. TOC methods include: SM 5310B, SM 5310C, SM
    
    5310D (SM, 2005b, 2005c, 2005d), or SM 5310B-00, SM 5310C-00, SM 5310D-
    
    00 (SM Online, 2000a, 2000b, 2000c), EPA Method 415.3 (Rev. 1.1 or
    
    1.2) (USEPA, 2005, 2009b). Bromide methods include: EPA Methods 300.0
    
    (Rev. 2.1), 300.1 (Rev. 1.0), 317.0 (Rev. 2.0), 326.0 (Rev. 1.0)
    
    (USEPA, 1993, 1997, 2001b, 2002) or ASTM D 6581-12 (ASTM, 2012).
    
    \11\ EPA Method 541 (GC/MS) (USEPA, 2015d).
    
    \12\ EPA Method 530 (GC/MS) (USEPA, 2015e).
2. What are the UCMR 4 sampling design and timeline of activities?
  
  EPA is maintaining the 2018 to 2020 monitoring timeframe identified in the proposal. Preparations prior to 2018 will include coordinating laboratory approval, selecting representative small systems (USEPA, 2001a), developing SMPs and establishing monitoring schedules. Exhibit 4 illustrates the major activities that will take place in preparation for and during the implementation of UCMR 4.
  
  GRAPHIC TIFF OMITTED TR20DE16.002
  
  Page 92673
  
  To minimize the impact of the rule on small systems (those serving 10,000 or fewer people), EPA pays for the sample kit preparation, sample shipping fees and analysis costs for these systems. In addition, no small system will be required to monitor for both cyanotoxins and the 20 additional UCMR contaminants. Consistent with prior UCMRs, large systems (those serving more than 10,000 people) pay for all costs associated with their monitoring. A summary of the estimated number of systems subject to monitoring is shown in Exhibit 5.
  
  Exhibit 5--Systems To Participate in UCMR 4 Monitoring
  
  ----------------------------------------------------------------------------------------------------------------
  
  National sample: Assessment monitoring design
  
  -------------------------------------------------------- Total number
  
  System size (number of people served) 20 Additional list 1 of systems per
  
  10 List 1 cyanotoxins contaminants \3\ size category
  
  ----------------------------------------------------------------------------------------------------------------
  
  Small Systems \1\ (25-10,000)........... 800 randomly selected SW 800 randomly selected SW, 1,600
  
  or GWUDI systems. GWUDI and GW systems.
  
  Large Systems \2\ (10,001 and over)..... All SW or GWUDI systems All SW, GWUDI and GW 4,292
  
  (2,725). systems (4,292).
  
  -----------------------------------------------------------------------
  
  Total............................... 3,525..................... 5,092..................... 5,892
  
  ----------------------------------------------------------------------------------------------------------------
  
  \1\ Total for small systems is additive because these systems will only be selected for one component of UCMR 4
  
  sampling (10 cyanotoxins or 20 additional contaminants). EPA will pay for all analytical costs associated with
  
  monitoring at small systems.
  
  \2\ Large system counts are approximate. The number of large systems is not additive. All SW and GWUDI systems
  
  will monitor for cyanotoxins; those same systems will also monitor for the 20 additional List 1 contaminants,
  
  as will the large GW systems.
  
  \3\ Water systems that are not subject to HAA5 monitoring under the D/DBPRs (Sec. 141.Subparts L and V) are
  
  not required to monitor for the UCMR 4 HAAs or associated indicators (TOC and bromide).
  1. Sampling Frequency, Timing
    1. This Rule
      
      Today's rule maintains the proposed increased sampling frequency and narrower monitoring timeframe for total microcystins and the nine cyanotoxins. Sampling will take place twice a month for four consecutive months (total of eight sampling events) for SW and GWUDI systems. These water systems will collect samples during the monitoring timeframe of March through November (excluding December, January and February). GW systems are excluded from cyanotoxin monitoring.
      
      Monitoring for the 20 additional UCMR 4 contaminants will be based on the traditional UCMR sampling frequency and timeframe. For SW and GWUDI systems, sampling will take place for four consecutive quarters over the course of 12 months (total of four sampling events). Sampling events will occur three months apart. For example, if the first sample is taken in January, the second will then occur anytime in April, the third will occur anytime in July and the fourth will occur anytime in October. For GW systems, sampling will take place twice over the course of 12 months (total of two sampling events). Sampling events will occur five to seven months apart. For example, if the first sample is taken in April, the second sample will then occur anytime in September, October or November.
      
      EPA, in conjunction with the states, will initially determine schedules (year and months of monitoring) for large water systems. These PWSs will then have an opportunity to modify their schedule for planning purposes or other reasons (e.g., to conduct monitoring during the months the system or the state believes are most vulnerable, spread costs over multiple years, address a situation where the sampling location will be closed during the scheduled month of monitoring, etc.). PWSs are not permitted to reschedule monitoring specifically to avoid sample collection during a suspected vulnerable period for the cyanotoxins. EPA will schedule and coordinate small system monitoring by working closely with partnering states. SMPs provide an opportunity for states to review and revise the initial sampling schedules that EPA proposes.
    2. Summary of Major Comments and EPA Responses
      
      Commenters generally supported the narrower timeframe for cyanotoxin sampling but disfavored the narrower March through November timeframe for the 20 additional contaminants. For the latter group of contaminants, EPA received multiple comments that recommended using the traditional sampling frequency and timing of previous UCMR cycles. Commenters cited the potential for cost savings by allowing the UCMR 4 HAAs to be sampled on the same schedule as compliance monitoring, and they also suggested that traditional 12-month monitoring would be appropriate for assessing lifetime exposure. EPA agrees with these points and today's rule includes the traditional monitoring schedule for the 20 additional contaminants. EPA's response is detailed more fully in the ``Response to Comments Document for the Unregulated Contaminant Monitoring Rule (UCMR 4),'' (USEPA, 2016b), which can be found in the electronic docket listed in the ADDRESSES section of this notice.
      
      Several commenters recommended that the Agency reduce the number of sample events for GW systems to one instead of the traditional two. Commenters provided an assessment of data on UCMR 3 contaminants in GW systems, and suggested that there is no significant statistical difference between the results for the two sample events for many of the contaminants. EPA acknowledges that based on the UCMR 3 data, the correlation between sample event 1 and sample event 2 for GW systems can be high, and the distributions of measured values can be very similar. However, when making regulatory determinations, EPA evaluates the number of systems (and populations) with means or single measured values above health levels of concern, as both values provide important information on the occurrence of UCMR contaminants in PWSs. The approach suggested by commenters would yield less accurate data for several reasons. First, the analysis provided by the commenters shows that the counts or percentage of systems above a concentration of interest can vary between sample events, and that there are individual cases where the contaminant is not detected in one sample event but occurs at significant levels in the second event. In addition, the analysis by commenters did not find a strong correlation between the two GW sampling events for chlorate, a disinfectant byproduct, likely due to the temporal variability in disinfection practices. This strongly suggests that having a single sample
      
      Page 92674
      
      event may not be appropriate for temporally variable contaminants like pesticides and other anthropogenic contaminants. EPA did consider making exceptions for certain classes of contaminants (e.g., those contaminants that are not as temporally variable), however, the UCMR design must address all types of contaminants on a national scale, often without advance knowledge about the degree to which the contaminant occurrence may vary over time. Making exceptions would increase the complexity of the sample design. In addition, statistical means based on two measurements have considerably less error than a single measurement per system and provide a more robust dataset for future regulatory decisions. EPA also notes that the analysis provided by commenters only addressed a limited set of contaminants (i.e., those from UCMR 3) and did not examine the results from other UCMR cycles; if EPA were to consider reducing sampling frequency as suggested, the Agency would need more robust information. EPA will re-evaluate this issue in future UCMR cycles if new information becomes available.
      
      Finally, it is worth noting that the Agency does allow systems the opportunity to reduce monitoring by using approved GW representative entry points and, in the case of water systems that purchase water from the same source, by using representative connections.
  2. Phased Sample Analysis for Microcystins
    1. This Rule
      
      Today's rule utilizes a phased sample analysis approach for the microcystins to reduce analytical costs (i.e., PWSs will collect all required samples for each sampling event but not all samples may need to be analyzed). However, that phased approach has been simplified relative to the proposed approach and will begin with sample collection at the entry point to the distribution system (EPTDS). Three samples will be collected at the EPTDS for cyanotoxins. One sample will be collected for EPA Method 546 (Adda ELISA), another for potential analysis by EPA Method 544, and another for analysis by EPA Method 545. Adda ELISA is a widely used screening assay that allows for the aggregate detection of numerous microcystin congeners; it does not allow for measurement of the individual congeners (USEPA, 2015f; Fischer et al., 2001; McElhiney and Lawton, 2005; Zeck et al., 2001). If the EPTDS ELISA result is less than 0.3 micrograms per liter (microg/L) (i.e., the reporting limit for total microcystins), then the sample collected for Method 544 will not be analyzed for that sample event and only the Adda ELISA result will be reported to EPA. If the ELISA result is greater than or equal to 0.3 microg/L, the result will be reported to EPA and the EPA Method 544 sample will then be analyzed to identify and quantify nodularin and the six specific microcystin congeners identified in Exhibit 3. Cylindrospermopsin and anatoxin-a will only be monitored at the EPTDS, with analysis by EPA Method 545.
      
      In lieu of the proposed source-water ELISA monitoring, this final rule requires PWSs to answer four simple ``metadata'' questions (identifying the appropriate responses from the options provided) to help EPA understand the source water quality at the time their EPTDS samples are collected. These questions are identified in the Data Elements section III.C.1.
    2. Summary of Major Comments and EPA Responses
      
      EPA received multiple comments on the proposed phased approach to microcystins and the utility of measuring pH and temperature in the source water. Some commenters recommended omitting source water sampling for microcystins, suggesting that a correlation cannot be drawn between source water and finished water using the proposed approach. Commenters also suggested the following: Targeted studies should collect treatment plant metadata to support future analyses; the phased approach could potentially miss an increase in cyanotoxins released as a result of treatment (e.g., cell rupture during treatment); the inclusion of both source water data and drinking water data in NCOD and other outreach materials would confuse consumers; and more appropriate candidate indicators could be considered. EPA has considered these concerns and is not requiring source water microcystin monitoring in the final rule, nor is the Agency requiring pH and temperature data collection. UCMR 4 focuses instead on finished water cyanotoxin data collection and a more qualitative characterization of source water. EPA estimates that the final rule approach, relying on the collection of source water metadata in lieu of source water sampling, reduces $1.8 million in costs from the proposed regulation over the five-year period of the UCMR 4. The collection of source water metadata can easily be incorporated into the data reporting system and will complement the quantitative analytical drinking water data used to support future regulatory determinations.
      
      EPA also received comments reflecting confusion about the interpretation of results from the Adda ELISA microcystin method and Method 544 (microcystins by LC-MS/MS). EPA notes that the two methods provide different measures of microcystin occurrence and risk, and one result cannot practically be used to confirm the other. The Adda ELISA allows for an aggregate quantification of a wide spectrum of microcystin congeners based on the ability of the antibodies used in the assay to recognize microcystins, while Method 544 focuses on quantifying six specific microcystin congeners. The microcystins addressed in Method 544 may or may not be the dominant congeners in particular source waters.
  3. Applicability of HAA Monitoring Requirements
    1. This Rule
      
      If a water system is not subject to HAA5 monitoring under the D/
      
      DBPRs (see Sec. 141.622 for D/DBPR monitoring requirements), the water systems is not required to collect and analyze UCMR 4 HAA samples.
    2. Summary of Major Comments and EPA Responses
      
      One commenter suggested that EPA remove the UCMR 4 requirement for water systems to monitor for HAAs if the system is not subject to HAA5 monitoring under the D/DBPRs. The logic is that non-disinfecting GW systems would not be expected to have measureable HAAs as DBPs. EPA agrees with the comment and has removed the requirement. This change reduces the UCMR 4 cost by $826,000 from the proposed rule's cost over the 5-year UCMR 4 period.
  4. Representative Sampling
    1. This Rule
      
      Consistent with previous UCMRs and as described in Sec. 141.35(c)(3), UCMR 4 maintains the option for large GW systems that have multiple EPTDSs to sample, with prior approval, at representative sampling locations rather than at each EPTDS. Representative sampling plans approved under prior UCMRs will be recognized as valid for UCMR 4. Systems must submit a copy of documentation from their state or EPA representing the prior approval of their alternative sampling plan. Any new GW representative monitoring plans must be submitted to EPA for review (by the state or EPA) within 120 days from publication of this final rule.
      
      Page 92675
      
      Once approved, these representative EPTDS locations, along with previously approved EPTDS locations from prior UCMRs, must be loaded into the Safe Drinking Water Accession and Review System (SDWARS) by the water system by December 31, 2017.
      
      Consistent with previous UCMRs and as described in Sec. 141.40, Table 1, systems that purchase water with multiple connections from the same wholesaler may select one representative connection from that wholesaler. This EPTDS sampling location must be representative of the highest annual volume connections. If the connection selected as the representative EPTDS is not available for sampling, an alternate highest volume representative connection must be sampled. Water provided by multiple wholesalers will be considered different sources and will each need a representative connection.
    2. Summary of Major Comments and EPA Responses
      
      EPA received multiple comments about representative wholesale connections from consecutive systems. Commenters were concerned that this approach to reduce monitoring would be eliminated in UCMR 4. The proposed rule preamble explicitly highlighted the flexibility for representative ground water sampling, but did not highlight the option for representative wholesale connections (i.e., for consecutive systems). In this preamble, EPA is affirming the opportunity for water systems that purchase water (with multiple connections from the same wholesaler) to reduce monitoring; this option will continue in UCMR 4. EPA will likewise address this in future meetings, webinars and outreach materials.
  5. Sampling Locations
    1. This Rule
      
      Sample collection for the UCMR 4 contaminants will take place at the EPTDS for all contaminant groups except for the HAAs, which will take place in the distribution system. Sampling for the HAA indicators, TOC and bromide, will take place at a single source water influent for each treatment plant.
      
      If the system's treatment plant/water source is subject to the D/
      
      DBPR's HAA5 monitoring requirements under Sec. 141.622, the water system will collect samples for the UCMR 4 HAAs at the D/DBPR sampling location(s). UCMR 4 HAA samples and D/DBPR HAA5 compliance monitoring samples may be collected by the PWS at the same time. However, EPA notes that PWSs are required to arrange for UCMR 4 HAA samples to be analyzed by a UCMR 4 approved laboratory using EPA Method 552.3 or 557 (both of which are compliance methods also approved for analysis of D/
      
      DBPR samples).
      
      For those systems subject to UCMR 4 HAA monitoring, sampling for the HAA indicators (TOC and bromide) will take place at the source water influent for each treatment plant (concurrent with UCMR 4 HAA sampling in the distribution system). This indicator-monitoring requirement does not pertain to consecutive systems (i.e., those purchasing water from other systems). For purposes of TOC and bromide sampling, EPA defines source water influent under UCMR as untreated water entering the water treatment plant (i.e., at a location prior to any treatment).
      
      SW and GWUDI systems subject to TOC monitoring under the D/DBPRs will use their TOC source water sampling site(s) defined at Sec. 141.132 for UCMR 4 TOC and bromide samples. If a SW or GWUDI system is not subject to the D/DBPR TOC monitoring, it will use its Long Term 2 Enhance Surface Water Treatment Rule (LT2) source water sampling site(s) (Sec. 141.703) to collect UCMR 4 samples for TOC and bromide. GW systems that are subject to the D/DBPRs will take TOC and bromide samples at their influents entering their treatment train.
    2. Summary of Major Comments and EPA Responses
      
      With the exception of microcystin monitoring, commenters generally agreed with the sampling location approach described in the proposal. Changes made to address the microcystin comments are addressed in section III.B.2.
3. What are the reporting requirements for UCMR 4?
  1. Data Elements
  1. This Rule
    
    Today's final rule maintains the 26 data elements described in the proposed rule and updates some of the definitions for clarity and consistency in the reporting requirements. Additionally, EPA has included four data elements to address collection of the source water metadata discussed in section III.B.2.
    
    The four new metadata elements are all yes or no questions, with a corresponding drop down menu of options if yes is selected:
    
    (1) Bloom Occurrence--preceding the finished water sample collection, did you observe an algal bloom in your source waters near the intake?
    
    (2) Cyanotoxin Occurrence--preceding the finished water sample collection, were cyanotoxins ever detected in your source waters, near the intake and prior to any treatment (based on sampling by you or another party)?
    
    (3) Indicator of Possible Bloom--Treatment--preceding the finished water sample collection, did you notice any changes in your treatment system operation and/or treated water quality that may indicate a bloom in the source water?
    
    (4) Indicator of Possible Bloom--Source Water Quality Parameters--
    
    preceding the finished water sample collection, did you observe any notable changes in source water quality parameters (if measured)?
    
    Please see Table 1 of Sec. 141.35(e) for the complete list of data elements, definitions and drop down options that will be provided in the data reporting system.
  2. Summary of Major Comments and EPA Responses
    
    EPA received many comments on the proposed data elements, particularly regarding the complexity and utility of collecting the new quality control (QC) parameters; concerns with how the data will be gathered and processed; and questions about how the database will function.
    
    EPA will collect all 30 data elements in SDWARS 4, an updated version of the data reporting system used in previous UCMR actions. More than half of these data elements (e.g., inventory and analytical results) were used in prior UCMR cycles and were included in the previous SDWARS system. The new QC data elements are already generated by the laboratory and do not constitute new analytical requirements.
    
    SDWARS 4 will include improvements in the user interface and new QC checks will be built into the system to review the data in real-time. Consistent with prior UCMR cycles, states and EPA will have access to data once posted by the laboratory and reviewed by the PWS (or 60 days after the laboratory posting, whichever comes first). EPA will offer two database training sessions in 2017 to help users become familiar with the new system. One training session will be for the water systems and the other training session will be for the laboratories. A future Federal Register announcement will provide more details on these training sessions.
    
    Other comments regarding the data elements included the following specific points: a request for a simpler
    
    Page 92676
    
    classification of treatment ``bins''; a recommendation that the final rule collect the primary and secondary disinfectant practice in place at the time of HAA sampling; an observation that the UCMR 4 data are more informative when there is information describing the associated treatment; a recommendation that EPA simplify the data elements and data definitions; and a recommendation that the rule not collect metadata about oxidant addition, oxidant order of application, oxidant dose and oxidant contact time.
    
    The final rule simplifies and clarifies the treatment options available for the PWS to select as metadata; includes the collection of all disinfectant practices and information describing the treatment in place; simplifies the data elements and data definitions; and does not include the collection of metadata about oxidant order of application, dose or contact time. EPA's response is detailed more fully in the ``Response to Comments Document for the Unregulated Contaminant Monitoring Rule (UCMR 4),'' (USEPA, 2016b), which can be found in the electronic docket listed in the ADDRESSES section of this notice.
How are laboratories approved for UCMR 4 monitoring?

Consistent with the proposal, and with past practice, the final rule requires EPA approval of all laboratories conducting analyses for UCMR 4. EPA will follow the traditional Agency approach, outlined in the proposal, to approving UCMR laboratories, which requires laboratories seeking approval to: (1) Provide EPA with data that demonstrates a successful completion of an initial demonstration of capability (IDC) as outlined in each method; (2) verify successful analytical performance at or below the MRLs as specified in this action; (3) provide information about laboratory operating procedures; and (4) successfully participate in an EPA proficiency testing (PT) program for the analytes of interest. Audits of laboratories may be conducted by EPA prior to and/or following approval. The ``UCMR 4 Laboratory Approval Requirements and Information Document'' (USEPA, 2016d) provides guidance on the EPA laboratory approval program and the specific method acceptance criteria.

EPA may supply analytical reference standards for select analytes to participating/approved laboratories when reliable standards are not readily available through commercial sources.

This final rule's structure for the laboratory approval program is the same as that proposed for UCMR 4 and employed in previous UCMRs, and provides an assessment of the laboratories' ability to perform analyses using the methods listed in Sec. 141.40(a)(3), Table 1. The UCMR 4 laboratory approval process is designed to assess whether laboratories possess the required equipment and analyst skills and can meet the laboratory-performance and data-reporting criteria described in this action. Laboratory participation in the UCMR laboratory approval program is voluntary. However, as in previous UCMRs and as proposed for UCMR 4, EPA will require PWSs to exclusively use laboratories that have been approved under the program to analyze UCMR 4 samples. EPA expects to post a list of approved UCMR 4 laboratories to http://www.epa.gov/dwucmr. Laboratories are encouraged to apply for UCMR 4 approval as early as possible, as EPA anticipates that large PWSs scheduled for monitoring in the first year will be making arrangements for sample analyses soon after the final rule is published. The steps and requirements for the laboratory approval process are listed in sections A through F below.
1. Request To Participate
  
  Laboratories interested in the UCMR 4 laboratory approval program can request registration materials by emailing EPA at UCMR_Sampling_Coordinator@epa.gov to request registration materials.
2. Registration
  
  Laboratory applicants will provide registration information that includes: Laboratory name, mailing address, shipping address, contact name, phone number, email address and a list of the UCMR 4 methods for which the laboratory is seeking approval. This registration step provides EPA with the necessary contact information, and ensures that each laboratory receives a customized application package. Laboratories must complete and submit the necessary registration information by February 21, 2017.
3. Application Package
  
  Laboratories wishing to participate will complete and return a customized application package that includes the following: IDC data, including precision, accuracy and results of MRL studies; information regarding analytical equipment and other materials; proof of current drinking water laboratory certification (for select compliance monitoring methods); and example chromatograms for each method under review. Laboratories must complete and submit the necessary application materials by April 19, 2017.
  
  As a condition of receiving and maintaining approval, the laboratory is expected to confirm that it will post UCMR 4 monitoring results and quality control data that meet method criteria (on behalf of its PWS clients) to EPA's UCMR electronic data reporting system, SDWARS.
4. EPA's Review of Application Packages
  
  EPA will review the application packages and, if necessary, request follow-up information. Laboratories that successfully complete the application process become eligible to participate in the UCMR 4 PT program.
5. Proficiency Testing
  
  A PT sample is a synthetic sample containing a concentration of an analyte or mixture of analytes that is known to EPA, but unknown to the laboratory. To be approved, a laboratory is expected to meet specific acceptance criteria for the analysis of a UCMR 4 PT sample(s) for each analyte in each method, for which the laboratory is seeking approval. EPA intends to offer at least two opportunities for a laboratory to successfully analyze UCMR 4 PT samples after publication of the final rule. A laboratory is expected to pass one of the PT studies for each analytical method for which it is requesting approval, and will not be required to pass a PT study for a method it has already passed in a previous UCMR 4 PT study. EPA does not expect to conduct additional PT studies after the start of system monitoring; however, laboratory audits will likely be ongoing throughout UCMR 4 implementation. Initial laboratory approval is expected to be contingent on successful completion of a PT study. Continued laboratory approval is contingent on successful completion of the audit process and satisfactorily meeting all the other stated conditions.
6. Written EPA Approval
  
  For laboratories that have already successfully completed the preceding steps (A through E), EPA will have sent the applicant a letter listing the methods for which approval is pending (i.e., pending promulgation of this rule). Because no changes have been made to the final rule that impact the laboratory approval program, laboratories that received pending approval letters will be granted approval without further action on their part. Additional approval actions (i.e., for those laboratories that apply and have not already proceeded to the point of being in ``approval pending'' status) will be based on laboratory completion of Steps
  
  Page 92677
  
  A through E. In both cases, EPA will document its final decision in writing.
  
  EPA did not receive any adverse comments on the laboratory approval process or criteria that it proposed.
What is the past and future stakeholder involvement in the regulation process?
1. What is the states' role in the UCMR program?
  
  UCMR is a direct implementation rule (i.e., EPA has primary responsibility for its implementation) and state participation is voluntary. Under previous UCMRs, specific activities that individual states, tribes and territories agreed to carry out or assist with were identified and established exclusively through PAs. Through PAs, states, tribes and territories can help EPA implement the UCMR program and help ensure that the UCMR data are of the highest quality possible to best support Agency decision making. Under UCMR 4, EPA will continue to use the PA process to determine and document the following: the process for review and revision of the SMPs; replacing and updating system information; review and approval of proposed GW representative monitoring plans; notification and instructions for systems; and compliance assistance. EPA recognizes that states/primacy agencies often have the best information about PWSs in their state and encourages states to partner.
  
  SMPs include tabular listings of the systems that EPA selected and the proposed schedule for their monitoring. Initial SMPs also typically include instructions to states for revising and/or correcting system information in the SMPs, including modifying the sampling schedules for small systems. EPA will incorporate revisions from states, resolve any outstanding questions and return the final SMPs to each state.
2. What stakeholder meetings have been held in preparation for UCMR 4?
  
  EPA incorporates stakeholder involvement into each UCMR cycle. Specific to the development of UCMR 4, EPA held three public stakeholder meetings and is announcing a fourth in today's preamble (see section V.C). EPA held a meeting focused on drinking water methods for CCL contaminants on May 15, 2013, in Cincinnati, Ohio. Participants included representatives of state agencies, laboratories, PWSs, environmental organizations and drinking water associations. Meeting topics included an overview of the regulatory process (CCL, UCMR and Regulatory Determination) and drinking water methods under development, primarily for CCL contaminants (see USEPA, 2013 for presentation materials). EPA held a second stakeholder meeting on June 25, 2014, in Washington, DC. Attendees representing state agencies, tribes, laboratories, PWSs, environmental organizations and drinking water associations participated in the meeting via webinar and in person. Meeting topics included a status update on UCMR 3; UCMR 4 potential sampling design changes relative to UCMR 3; UCMR 4 candidate analytes and rationale; and the laboratory approval process (see USEPA, 2014 for meeting materials). The third stakeholder meeting was held on January 13, 2016, via a webinar, during the public comment period for the proposed rule. Attendees representing state agencies, laboratories, PWSs, environmental organizations and drinking water associations participated. Meeting topics included the proposed UCMR 4 monitoring requirements, analyte selection and rationale, analytical methods, the laboratory approval process and GW representative monitoring plans (see USEPA, 2016f for meeting materials).
3. How do I participate in the upcoming stakeholder meeting?
  
  EPA will hold the fourth UCMR 4 public stakeholder meeting in Washington, DC, on April 12, 2017. Attendees can participate in person or via webinar. Topics will include the final UCMR 4 requirements for monitoring, sampling and reporting, analytical methods, the laboratory approval process, GW representative monitoring plans and consecutive system monitoring plans.
  1. Meeting Participation
    
    Those who wish to participate in the public meeting, whether in person or via webinar, need to register in advance no later than 5:00 p.m., eastern time on April 7, 2017, by going to http://www.eventbrite.com/e/ucmr-4-public-stakeholder-meeting-registration-28264984329. To ensure adequate time for questions, individuals or organizations with specific questions should identify any upfront questions when they register. Additional questions from attendees will be taken during the meeting and answered as time permits. The number of webinar connections available for the meeting is limited and will be available on a first-come, first-served basis. Further details about registration and participation can be found on EPA's Unregulated Contaminant Monitoring Program ``Meetings and Materials'' Web site at http://www.epa.gov/dwucmr.
  2. Meeting Materials
    
    Materials are expected to be sent by email to all registered attendees prior to the meeting. EPA will post the materials on the Agency's Web site for persons who are unable to participate.
4. How did EPA consider Children's Environmental Health?
  
  Executive Order 13045 does not apply to UCMR 4, however, EPA's Policy on Evaluating Health Risks to Children is applicable (See VII.G. Executive Order 13045). By monitoring for unregulated contaminants that may pose health risks via drinking water, UCMR furthers the protection of public health for all citizens, including children. EPA considered children's health risks during the development of UCMR 4. This includes considering public comments about candidate contaminant priorities.
  
  The objective of UCMR 4 is to collect nationally representative drinking water data on a set of unregulated contaminants. EPA generally collects occurrence data for contaminants at the lowest levels that are feasible for the national network of approved drinking water laboratories to quantify accurately. By setting reporting levels as low as is feasible, the Agency positions itself to better address contaminant risk information in the future, including that associated with unique risks to children.
5. How did EPA address Environmental Justice?
  
  The EPA has concluded that this action is not subject to Executive Order 12898 (59 FR 7629, February 16, 1994) because it does not establish an environmental health or safety standard (see VII.J. Executive Order 12898). This regulatory action provides EPA and other interested parties with scientifically valid data on the national occurrence of selected contaminants in drinking water. By seeking to identify unregulated contaminants that may pose health risks via drinking water from all PWSs, UCMR furthers the protection of public health for all citizens. EPA recognizes that unregulated contaminants in drinking water are of interest to all populations and structured the rulemaking process and implementation of the UCMR 4 rule to allow for meaningful involvement and transparency. EPA organized public meetings and webinars to share information regarding the development of UCMR 4; coordinated with tribal governments; and convened a
  
  Page 92678
  
  workgroup that included representatives from several states.
  
  EPA will continue to collect U.S. Postal Service Zip Codes for each PWS's service area, as collected under UCMR 3, to support assessment in future regulatory evaluations of whether or not minority, low-income and/or indigenous-population communities are uniquely impacted by particular drinking water contaminants.
What documents are being incorporated by reference?

The following methods are incorporated by reference into this section for UCMR 4 monitoring. All approved material is available for inspection electronically at http://www.regulations.gov (Docket ID No. EPA-HQ-OW-2015-0218), or from the sources listed for each method. EPA has worked to make these methods and documents reasonably available to interested parties. The EPA and non-EPA methods that support monitoring under this rule are as follows:
1. Methods From the U.S. Environmental Protection Agency
  
  The following methods are from the U.S. Environmental Protection Agency, Water Docket, EPA/DC, EPA West, Room 3334, 1301 Constitution Avenue NW., Washington, DC 20004.
  1. Method 200.8 ``Determination of Trace Elements in Waters and Wastes by Inductively Coupled Plasma--Mass Spectrometry,'' Revision 5.4, EMMC Version, 1994. Available on the Internet at http://www.nemi.gov. This is an EPA method for the analysis of elements in water by ICP-MS and will measure germanium and manganese during UCMR 4.
  2. Method 300.0 ``Determination of Inorganic Anions by Ion Chromatography Samples,'' Revision 2.1, August 1993. Available on the Internet at http://www.nemi.gov. This is an EPA method for the analysis of inorganic anions in water samples using ion chromatography (IC) with conductivity detection. It will be used for the measurement of bromide, an indicator for the HAAs.
  3. Method 300.1 ``Determination of Inorganic Anions in Drinking Water by Ion Chromatography,'' Revision 1.0, 1997. Available on the Internet at http://www.epa.gov/dwanalyticalmethods. This is an EPA method for the analysis of inorganic anions in water samples using IC with conductivity detection. It will be used for the measurement of TOC, an indicator for the HAAs.
  4. Method 317.0 ``Determination of Inorganic Oxyhalide Disinfection By-Products in Drinking Water Using Ion Chromatography with the Addition of a Postcolumn Reagent for Trace Bromate Analysis,'' Revision 2.0, July 2001, EPA 815-B-01-001. Available on the Internet at http://www.epa.gov/dwanalyticalmethods. This is an EPA method for the analysis of inorganic anions in water samples using IC with conductivity detection. It will be used for the measurement of bromide, an indicator for the HAAs.
  5. Method 326.0 ``Determination of Inorganic Oxyhalide Disinfection By-Products in Drinking Water Using Ion Chromatography Incorporating the Addition of a Suppressor Acidified Postcolumn Reagent for Trace Bromate Analysis,'' Revision 1.0, June 2002, EPA 815-R-03-007. Available on the Internet at http://www.epa.gov/dwanalyticalmethods. This is an EPA method for the analysis of inorganic anions in water samples using IC with conductivity detection. It will be used for the measurement of bromide, an indicator for the HAAs.
  6. Method 415.3 ``Determination of Total Organic Carbon and Specific UV Absorbance at 254 nm in Source Water and Drinking Water,'' Revision 1.1, February 2005, EPA/600/R-05/055. Available on the Internet at http://www.epa.gov/water-research/epa-drinking-water-research-methods. This is an EPA method for the analysis of TOC in water samples using a conductivity detector or a nondispersive infrared detector.
  7. Method 415.3 ``Determination of Total Organic Carbon and Specific UV Absorbance at 254 nm in Source Water and Drinking Water,'' Revision 1.2, September 2009, EPA/600/R-09/122. Available on the Internet at http://www.epa.gov/water-research/epa-drinking-water-research-methods. This is an EPA method for the analysis of TOC in water samples using a conductivity detector or a nondispersive infrared detector.
  8. Method 525.3 ``Determination of Semivolatile Organic Chemicals in Drinking Water by Solid Phase Extraction and Capillary Column Gas Chromatography/Mass Spectrometry (GC/MS),'' Version 1.0, February 2012, EPA/600/R-12/010. Available on the Internet http://www.epa.gov/water-research/epa-drinking-water-research-methods. This is an EPA method for the analysis of semivolatile organic chemicals in drinking water using SPE and GC/MS and will measure the nine UCMR 4 pesticides (alpha-
    
    hexachlorocyclohexane, chlorpyrifos, dimethipin, ethoprop, oxyfluorfen, profenofos, tebuconazole, total cis- and trans- permethrin and tribufos).
  9. Method 530 ``Determination of Select Semivolatile Organic Chemicals in Drinking Water by Solid Phase Extraction and Gas Chromatography/Mass Spectrometry (GC/MS),'' Version 1.0, January 2015, EPA/600/R-14/442. Available on the Internet at http://www.epa.gov/water-research/epa-drinking-water-research-methods. This is an EPA method for the analysis of semivolatile organic chemicals in drinking water using SPE and GC/MS and will measure butylated hydroxyanisole, o-
    
    toluidine and quinoline.
  10. EPA Method 541: ``Determination of 1-Butanol, 1,4-Dioxane, 2-
    
    Methoxyethanol and 2-Propen-1-ol in Drinking Water by Solid Phase Extraction and Gas Chromatography/Mass Spectrometry,'' November 2015, EPA 815-R-15-011. Available on the Internet at http://www.epa.gov/water-research/epa-drinking-water-research-methods. This is an EPA method for the analysis of selected alcohols and 1,4-dioxane in drinking water using SPE and GC/MS and will measure 1-butanol, 2-
    
    methoxyethanol and 2-propen-1-ol.
  11. Method 544 ``Determination of Microcystins and Nodularin in Drinking Water by Solid Phase Extraction and Liquid Chromatography/
    
    Tandem Mass Spectrometry (LC/MS/MS),'' Version 1.0, February 2015, EPA 600-R-14/474. Available on the Internet at http://www.epa.gov/water-research/epa-drinking-water-research-methods. This is an EPA method for the analysis of selected cyanotoxins in drinking water using SPE and LC-MS/MS with electrospray ionization (ESI) and will measure six microcystins (microcystin-LA, microcystin-LF, microcystin-LR, microcystin-LY, microcystin-RR and microcystin-YR) and nodularin.
  12. EPA Method 545: ``Determination of Cylindrospermopsin and Anatoxin-a in Drinking Water by Liquid Chromatography Electrospray Ionization Tandem Mass Spectrometry (LC/ESI-MS/MS),'' April 2015, EPA 815-R-15-009. Available on the Internet at http://www.epa.gov/dwanalyticalmethods. This is an EPA method for the analysis of selected cyanotoxins in drinking water using LC-MS/MS with ESI and will measure cylindrospermopsin and anatoxin-a.
  13. EPA Method 546: ``Determination of Total Microcystins and Nodularins in Drinking Water and Ambient Water by Adda Enzyme-Linked Immunosorbent Assay,'' August 2016, EPA-815-B-16-011. Available on the Internet at http://www.epa.gov/dwanalyticalmethods. This is an EPA method for the analysis of total microcystins and nodularins in drinking water using ELISA.
    
    Page 92679
  14. Method 552.3 ``Determination of Haloacetic Acids and Dalapon in Drinking Water by Liquid-Liquid Microextraction, Derivatization, and Gas Chromatography with Electron Capture Detection,'' Revision 1.0, July 2003, EPA 815-B-03-002. Available on the Internet at http://www.epa.gov/dwanalyticalmethods. This is an EPA method for the analysis of haloacetic acids and dalapon in drinking water using liquid-liquid microextraction, derivatization, and GC with ECD, and will measure the three UCMR 4 HAA groups (HAA5, HAA6Br and HAA9).
  15. EPA Method 557: ``Determination of Haloacetic Acids, Bromate, and Dalapon in Drinking Water by Ion Chromatography Electrospray Ionization Tandem Mass Spectrometry (IC-ESI-MS/MS),'' Version 1.0, September 2009, EPA 815-B-09-012. Available on the Internet at http://www.epa.gov/dwanalyticalmethods. This is an EPA method for the analysis of haloacetic acids, bromate, and dalapon in drinking water using IC-
    
    MS/MS with ESI, and will measure the three UCMR 4 HAA groups (HAA5, HAA6Br and HAA9).
2. Methods From American Public Health Association--Standard Methods (SM)
  
  The following methods are from American Public Health Association--
  
  Standard Methods (SM), 800 I Street NW., Washington, DC 20001-3710
  1. ``Standard Methods for the Examination of Water & Wastewater,'' 21st edition (2005).
    1. SM 3125 ``Metals by Inductively Coupled Plasma/Mass Spectrometry.'' This is a Standard Method for the analysis of metals and metalloids in water by ICP-MS and is used for the analysis of germanium and manganese.
    2. SM 5310B ``Total Organic Carbon (TOC): High-Temperature Combustion Method.'' This is a Standard Method for the analysis of TOC in water samples using a conductivity detector or a nondispersive infrared detector.
    3. SM 5310C ``Total Organic Carbon (TOC): Persulfate-UV or Heated-
      
      Persulfate Oxidation Method.'' This is a Standard Method for the analysis of TOC in water samples using conductivity detector or a nondispersive infrared detector.
    4. SM 5310D ``Total Organic Carbon (TOC): Wet-Oxidation Method.'' This is a Standard Method for the analysis of TOC in water samples using a conductivity detector or a nondispersive infrared detector.
  2. ``Standard Methods Online.,'' approved 2000 (unless noted). Available for purchase on the Internet at http://www.standardmethods.org.
    1. SM 3125 ``Metals by Inductively Coupled Plasma/Mass Spectrometry'' Editorial revisions, 2011 (SM 3125-09). This is a Standard Method for the analysis of metals and metalloids in water by ICP-MS and is used to measure germanium and manganese.
    2. SM 5310B ``Total Organic Carbon: High-Temperature Combustion Method,'' (5310B-00). This is a Standard Method for the analysis of TOC in water samples using a conductivity detector or a nondispersive infrared detector.
    3. SM 5310C ``Total Organic Carbon: Persulfate-UV or Heated-
      
      Persulfate Oxidation Method,'' (5310C-00). This is a Standard Method for the analysis of TOC in water samples using a conductivity detector or a nondispersive infrared detector.
    4. SM 5310D ``Total Organic Carbon: Wet-Oxidation Method,'' (5310D-
      
      00). This is a Standard Method for the analysis of TOC in water samples using a conductivity detector or a nondispersive infrared detector.
3. Methods From ASTM International
  
  The following methods are from ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
  1. ASTM D5673-10 ``Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry,'' approved August 1, 2010. Available for purchase on the Internet at http://www.astm.org/Standards/D5673.htm. This is an ASTM method for the analysis of elements in water by ICP-MS and is used to measure germanium and manganese.
  2. ASTM D6581-12 ``Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography,'' approved March 1, 2012. Available for purchase on the Internet at http://www.astm.org/Standards/D6581.htm. This is an ASTM method for the analysis of inorganic anions in water samples using IC with conductivity detection. It will be used for the measurement of bromide, an indicator for the HAAs.
Statutory and Executive Order Reviews
1. Executive Order 12866: Regulatory Planning and Review and Executive Order 13563: Improving Regulation and Regulatory Review
  
  This action is a significant regulatory action that was submitted to the Office of Management and Budget (OMB) for review. Any changes made in response to OMB recommendations have been documented in the docket, ``Documentation of OMB Review Under Executive Order 12866: Revisions to the Unregulated Contaminant Monitoring Regulation (UCMR 4) for Public Water Systems.'' The EPA prepared an analysis of the potential costs associated with this action, and this is also available in the docket, ``Information Collection Request for the Unregulated Contaminant Monitoring Rule (UCMR 4).''
2. Paperwork Reduction Act (PRA)
  
  The information collection activities in this rule have been submitted for approval to OMB under the PRA. The ICR document that the EPA prepared has been assigned EPA ICR number 2192.08. You can find a copy of the ICR in the docket for this rule, and it is briefly summarized here. The ICR requirements are not enforceable until OMB approves them.
  
  The information that EPA will collect under this rule fulfills the statutory requirements of section 1445(a)(2) of the SDWA, as amended in 1996. EPA will collect information that describes the source of the water, location and test results for samples taken from PWSs as described in 40 CFR 141.35(e). The information collected will support Agency decisions as to whether or not to regulate particular contaminants under the SDWA. Reporting is mandatory. The data are not subject to confidentiality protection.
  
  EPA received a number of comments regarding cost and burden of the proposed rule. Those comments recommended the following: Omit source water monitoring for microcystins; omit UCMR 4 HAA monitoring for PWSs that do not conduct HAA compliance monitoring; allow monitoring over a 12-month period for contaminants other than cyanotoxins; and provide more accurate cost estimates. Based on these public comments, the following changes were made to the final rule. EPA's response is detailed more fully in the ``Response to Comments Document for the Unregulated Contaminant Monitoring Rule (UCMR 4),'' (USEPA, 2016b), which can be found in the electronic docket listed in the ADDRESSES section of this notice.
  1. Removed the proposed source water monitoring requirement for microcystins, temperature and pH.
  2. Limited UCMR 4 HAA monitoring to only those PWSs that are subject to the D/DBPRs.
  3. Restored the traditional 12-month monitoring schedule for the 20 additional (non-cyanotoxin) contaminants. This will support PWSs
    
    Page 92680
    
    that wish to do concurrent HAA compliance monitoring and UCMR 4 sampling.
  4. Increased the wage estimates to 2016 rates using the Employment Cost Index for waters and salaries in trade, transport and utilities.
  5. Updated the analytical costs of each method with new cost estimates from more laboratories.
    
    The annual burden and cost estimates described in this section are based on the implementation assumptions described in section III. In general, burden hours were calculated by:
  6. Determining the activities that PWSs and states would complete to comply with the UCMR activity;
  7. Estimating the number of hours per activity;
  8. Estimating the number of respondents per activity; and
  9. Multiplying the hours per activity by the number of respondents for that activity.
    
    Respondents to UCMR 4 include 1,600 small PWSs (800 for cyanotoxin monitoring and a different set of 800 for monitoring the additional 20 contaminants), the ~4,292 large PWSs and the 56 states and primacy agencies (~5,948 total respondents). The frequency of response varies across respondents and years. System costs (particularly laboratory analytical costs) vary depending on the number of sampling locations. For cost estimates, EPA assumed that systems will conduct sampling evenly from January 2018 through December 2020, excluding December, January and February of each year for cyanotoxins (i.e., one-third of the systems in each year of monitoring). Because the applicable ICR period is 2017-2019, one year of monitoring activity (i.e., 2020) is not captured in the ICR estimates; this will be addressed in a subsequent ICR renewal for UCMR 4.
    
    Small PWSs that are selected for UCMR 4 monitoring will sample an average of 6.7 times per PWS (i.e., number of responses per PWS) across the 3-year ICR period. The average burden per response for small PWSs is estimated to be 2.8 hours. Large PWSs (those serving 10,001 to 100,000 people) and very large PWSs (those serving more than 100,000 people) will sample and report an average of 11.4 and 14.1 times per PWS, respectively, across the 3-year ICR period. The average burden per response for large and very large PWSs is estimated at 6.1 and 9.9 hours, respectively. States are assumed to have an annual average burden of 244.3 hours related to coordination with EPA and PWSs. In the aggregate, during the ICR period, the average response (e.g., responses from PWSs and states) is associated with a burden of 6.9 hours, with a labor plus non-labor cost of $1,636 per response.
    
    The annual average per-respondent burden hours and costs for the ICR period are: Small PWSs--6.1 hours, or $169, for labor; large PWSs--
    
    23.3 hours, or $684, for labor and $5,756 for analytical costs; very large PWSs--46.4 hours, or $1,253, for labor and $15,680 for analytical costs; and states--244.3 hours, or $11,789, for labor. Annual average burden and cost per respondent (including both systems and states) is estimated to be 23.3 hours, with a labor plus non-labor cost of $3,718 per respondent. Burden is defined at 5 CFR 1320.3(b).
    
    An agency may not conduct or sponsor, and a person is not required to respond to, a collection of information unless it displays a currently valid OMB control number. The OMB control numbers for EPA's rules in 40 CFR are listed in 40 CFR part 9. When OMB approves this ICR, the Agency will announce that approval in the Federal Register and publish a technical amendment to 40 CFR part 9 to display the OMB control number for the approved information collection activities contained in this final rule.
3. Regulatory Flexibility Act (RFA)
  
  For purposes of assessing the impacts of this rule on small entities, EPA considered small entities to be PWSs serving 10,000 or fewer people, because this is the system size specified in the SDWA as requiring special consideration with respect to small system flexibility. As required by the RFA, EPA proposed using this alternative definition in the FR, (63 FR 7606, February 13, 1998 (USEPA, 1998a)), sought public comment, consulted with the Small Business Administration (SBA) and finalized the alternative definition in the Consumer Confidence Reports rulemaking, (63 FR 44512, August 19, 1998 (USEPA, 1998b)). As stated in that Final Rule, the alternative definition will be applied to future drinking water rules, including this rule.
  
  An agency certifies that a rule will not have a significant economic impact on a substantial number of small entities under the RFA. In making this determination, the impact of concern is any significant adverse economic impact on a substantial number of small entities if the rule relieves regulatory burden, has no net burden or otherwise has a positive economic effect on the small entities subject to the rule. The evaluation of the overall impact on small systems, summarized in the preceding discussion, is further described as follows. EPA analyzed the impacts for privately-owned and publicly-
  
  owned water systems separately, due to the different economic characteristics of these ownership types, such as different rate structures and profit goals. However, for both publicly- and privately-
  
  owned systems, EPA used the ``revenue test,'' which compares annual system costs attributed to the rule to the system's annual revenues. EPA used median revenue data from the 2006 CWS Survey for public and private water systems (USEPA, 2009c). The revenue figures were updated to 2016 dollars, and increased by three percent to account for inflation. EPA assumes that the distribution of the sample of participating small systems will reflect the proportions of publicly- and privately-owned systems in the national inventory. The estimated distribution of the representative sample, categorized by ownership type, source water and system size, is presented in Exhibit 6.
  
  Exhibit 6--Number of Publicly- and Privately-Owned Small Systems Subject to UCMR 4
  
  ----------------------------------------------------------------------------------------------------------------
  
  Privately-
  
  System size (# of people served) Publicly-owned owned Total 1
  
  ----------------------------------------------------------------------------------------------------------------
  
  Ground Water
  
  ----------------------------------------------------------------------------------------------------------------
  
  500 and under................................................... 21 64 85
  
  501 to 3,300.................................................... 161 62 223
  
  3,301 to 10,000................................................. 179 41 220
  
  -----------------------------------------------
  
  Subtotal GW................................................. 361 167 528
  
  ----------------------------------------------------------------------------------------------------------------
  
  Page 92681
  
  Surface Water (and GWUDI)
  
  ----------------------------------------------------------------------------------------------------------------
  
  500 and under................................................... 18 21 39
  
  501 to 3,300.................................................... 241 86 327
  
  3,301 to 10,000................................................. 548 158 706
  
  -----------------------------------------------
  
  Subtotal SW................................................. 807 265 1,072
  
  -----------------------------------------------
  
  Total of Small Water Systems............................ 1,168 432 1,600
  
  ----------------------------------------------------------------------------------------------------------------
  
  \1\ PWS counts were adjusted to display as whole numbers in each size category.
  
  The basis for the UCMR 4 RFA certification is as follows: For the 1,600 small water systems that will be affected, the average annual cost for complying with this rule represents no more than 0.7% of system revenues (the highest estimated percentage is for GW systems serving 500 or fewer people, at 0.7% of its median revenue). Exhibit 7 presents the yearly cost to small systems and to EPA for the small system sampling program, along with an illustration of system participation for each year of UCMR 4.
  
  Exhibit 7--Implementation of UCMR 4 at Small Systems
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Cost description 2017 2018 2019 2020 2021 Total \1\
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Costs to EPA for Small System Program (Assessment Monitoring)
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------
  
  $0 $5,635,113 $5,635,113 $5,635,113 $0 $16,905,340
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Costs to Small Systems (Assessment Monitoring)
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------
  
  0 270,848 270,848 270,848 0 812,545
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Total Costs to EPA and Small Systems for UCMR 4
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------
  
  0 5,905,962 5,905,962 5,905,962 0 17,717,886
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------
  
  System Monitoring Activity Timeline \2\
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Assessment Monitoring: Cyanotoxins...................... .............. 1/3 PWSs 1/3 PWSs 1/3 PWSs .............. 800
  
  Sample Sample Sample
  
  Assessment Monitoring: 20 Additional Contaminants....... .............. 1/3 PWSs 1/3 PWSs 1/3 PWSs .............. 800
  
  Sample Sample Sample
  
  --------------------------------------------------------------------------------------------------------------------------------------------------------
  
  \1\ Totals may not equal the sum of components due to rounding.
  
  \2\ Total number of systems is 1,600. No small system conducts Assessment Monitoring for both cyanotoxins and the 20 additional contaminants.
  
  PWS costs are attributed to the labor required for reading about UCMR 4 requirements, monitoring, reporting and record keeping. The estimated average annual burden across the 5-year UCMR 4 implementation period of 2017-2021 is 2.8 hours at $102 per small system. Average annual cost, in all cases, is less than 0.7% of system revenues. By assuming all costs for laboratory analyses, shipping and quality control for small entities, EPA incurs the entirety of the non-labor costs associated with UCMR 4 small system monitoring, or 95% of total small system testing costs. Exhibit 8 and Exhibit 9 present the estimated economic impacts in the form of a revenue test for publicly- and privately-owned systems.
  
  Exhibit 8--UCMR 4 Relative Cost Analysis for Small Publicly-Owned Systems (2017-2021)
  
  ----------------------------------------------------------------------------------------------------------------
  
  Average annual Average annual
  
  Annual number hours per cost per Revenue test 2
  
  System size (# of people served) of systems system (2017- system (2017- (%)
  
  impacted 1 2021) 2021)
  
  ----------------------------------------------------------------------------------------------------------------
  
  Ground Water Systems
  
  ----------------------------------------------------------------------------------------------------------------
  
  500 and under................................... 4 1.5 $55 0.14
  
  501 to 3,300.................................... 32 1.6 59 0.04
  
  3,301 to 10,000................................. 36 1.7 63 0.01
  
  ----------------------------------------------------------------------------------------------------------------
  
  Surface Water (and GWUDI) Systems
  
  ----------------------------------------------------------------------------------------------------------------
  
  500 and under................................... 4 3.3 119 0.16
  
  501 to 3,300.................................... 48 3.3 119 0.04
  
  3,301 to 10,000................................. 110 3.4 124 0.01
  
  ----------------------------------------------------------------------------------------------------------------
  
  \1\ PWS counts were adjusted to display as whole numbers in each size category.
  
  \2\ The Revenue Test was used to evaluate the economic impact of an information collection on small government
  
  entities (e.g., publicly-owned systems); costs are presented as a percentage of median annual revenue in each
  
  size category (EPA, 2009c).
  
  Page 92682
  
  Exhibit 9--UCMR 4 Relative Cost Analysis for Small Privately-Owned Systems (2017-2021)
  
  ----------------------------------------------------------------------------------------------------------------
  
  Average annual Average annual
  
  Annual number hours per cost per Revenue test 2
  
  System size (# of people served) of systems system (2017- system (2017- (%)
  
  impacted 1 2021) 2021)
  
  ----------------------------------------------------------------------------------------------------------------
  
  Ground Water Systems
  
  ----------------------------------------------------------------------------------------------------------------
  
  500 and under................................... 13 1.5 $55 0.74
  
  501 to 3,300.................................... 12 1.6 59 0.04
  
  3,301 to 10,000................................. 8 1.7 63 0.01
  
  ----------------------------------------------------------------------------------------------------------------
  
  Surface Water (and GWUDI) Systems
  
  ----------------------------------------------------------------------------------------------------------------
  
  500 and under................................... 4 3.3 119 0.28
  
  501 to 3,300.................................... 17 3.3 119 0.04
  
  3,301 to 10,000................................. 32 3.4 124 0.01
  
  ----------------------------------------------------------------------------------------------------------------
  
  \1\ PWS counts were adjusted to display as whole numbers in each size category.
  
  \2\ The Revenue Test was used to evaluate the economic impact of an information collection on small government
  
  entities (e.g., privately-owned systems); costs are presented as a percentage of median annual revenue in each
  
  size category (EPA, 2009c).
  
  The Agency has determined that 1,600 small PWSs (for Assessment Monitoring), or approximately 4.2% of all small systems, will experience an impact of no more than 0.7% of revenues; the remainder of small systems will not be impacted.
  
  Although this rule will not have a significant economic impact on a substantial number of small entities, EPA has attempted to reduce this impact by assuming all costs for analyses of the samples and for shipping the samples from small systems to laboratories contracted by EPA to analyze UCMR 4 samples (the cost of shipping is now included in the cost of each analytical method). EPA has set aside $2.0 million each year from the Drinking Water State Revolving Fund (SRF), with its authority to use SRF monies for the purposes of implementing this provision of the SDWA. Thus, the costs to these small systems will be limited to the labor associated with collecting a sample and preparing it for shipping.
  
  I certify that this action will not have a significant economic impact on a substantial number of small entities under the RFA. In making this determination, the impact of concern is any significant adverse economic impact on small entities. The Agency therefore concluded that this action will have no net regulatory burden for all directly regulated small entities.
4. Unfunded Mandates Reform Act (UMRA)
  
  This action does not contain an annual unfunded mandate of $100 million or more as described in UMRA, 2 U.S.C. 1531-1538, and does not significantly or uniquely affect small governments. The action implements mandate(s) specifically and explicitly set forth in the SDWA without the exercise of any policy discretion by the EPA.
5. Executive Order 13132: Federalism
  
  This action does not have federalism implications. It will not have substantial direct effects on the states, on the relationship between the national government and the states, or on the distribution of power and responsibilities among the various levels of government.
6. Executive Order 13175: Consultation and Coordination With Indian Tribal Governments
  
  This action will neither impose substantial direct compliance costs on federally recognized tribal governments, nor preempt tribal law. As described previously, this rule requires monitoring by all large PWSs. Information in the SDWIS/Fed water system inventory indicates there are 17 large tribal PWSs (ranging in size from 10,001 to 40,000 customers). EPA estimates the average annual cost to each of these large PWSs, over the 5-year rule period, to be $3,864. This cost is based on a labor component (associated with the collection of samples), and a non-labor component (associated with shipping and laboratory fees), and represents 1.1% of average revenue/sales for large PWSs. UCMR also requires monitoring by a nationally representative sample of small PWSs. EPA estimates that approximately 1.5% of small tribal systems will be selected as a nationally representative sample for Assessment Monitoring. EPA estimates the average annual cost to small tribal systems over the 5-year rule period to be $102. Such cost is based on the labor associated with collecting a sample and preparing it for shipping and represents less than 0.7% of average revenue/sales for small PWSs. All other small PWS expenses (associated with shipping and laboratory fees) are paid by EPA.
  
  EPA consulted with tribal officials under the EPA Policy on Consultation and Coordination with Indian Tribes early in the process of developing this rule to permit them to have meaningful and timely input into its development. A summary of that consultation is provided in the electronic docket listed in the ADDRESSES section of this notice.
7. Executive Order 13045: Protection of Children From Environmental Health Risks and Safety Risks
  
  This action is not subject to Executive Order 13045 because it is not economically significant as defined in Executive Order 12866, and because EPA does not think the environmental health or safety risks addressed by this action present a disproportionate risk to children. This action's health and risk assessments are addressed in section V.D of the preamble.
8. Executive Order 13211: Actions Concerning Regulations That Significantly Affect Energy Supply, Distribution or Use
  
  This action is not a ``significant energy action'' because it is not likely to have a significant adverse effect on the supply, distribution or use of energy. This is a national drinking water occurrence study that was submitted to OMB for review.
National Technology Transfer and Advancement Act and 1 CFR Part 51

This action involves technical standards. This rule uses methods developed by the Agency and two major voluntary consensus method organizations to support UCMR 4 monitoring. The voluntary consensus method organizations are Standard Methods and ASTM International. EPA

Page 92683

identified acceptable consensus method organization standards for the analysis of manganese and germanium. In addition, there are several consensus standards that are approved for compliance monitoring that will be available for use in the analysis of TOC and bromide. A summary of each method along with how the method specifically applies to UCMR 4 can be found in section VI of the preamble.

All of these standards are reasonably available for public use. The Agency methods are free for download on EPA's Web site. The methods in the Standard Method 21st edition are consensus standards, available for purchase from the publisher, and are commonly used by the drinking water community. The methods in the Standard Method Online are consensus standards, available for purchase from the publisher's Web site, and are commonly used by the drinking water community. The methods from ASTM International are consensus standards, are available for purchase from the publisher's Web site, and are commonly used by the drinking water community.
1. Executive Order 12898: Federal Actions To Address Environmental Justice in Minority Populations and Low-Income Populations
  
  The EPA concludes that this action is not subject to Executive Order 12898 (59 FR 7629, February 16, 1994) because it does not establish an environmental health or safety standard. Background information regarding EPA's consideration of Executive Order 12898 in the development of this final rule is provided in section V.E of this preamble, and an additional supporting document has been placed in the electronic docket listed in the ADDRESSES section of this notice.
2. Congressional Review Act (CRA)
  
  This action is subject to the CRA, and the EPA will submit a rule report to each House of the Congress and to the Comptroller General of the United States. This action is not a ``major rule'' as defined by 5 U.S.C. 804(2).
References

ASDWA. 2013. Insufficient Resources for State Drinking Water Programs Threaten Public Health: An Analysis of State Drinking Water Programs' Resources and Needs. December 2013.

ASTM. 2010. ASTM D5673-10--Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry. Approved August 1, 2010. Available for purchase on the Internet at http://www.astm.org/Standards/D5673.htm.

ASTM. 2012. ASTM D6581-12--Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography. Available for purchase on the Internet at http://www.astm.org/Standards/D6581.htm.

Fischer, W.J., Garthwaite, I., Miles, C.O., Ross, K.M., Aggen, J.B., Chamberlin, A.R., Towers, N.R., Dietrich, D.R. 2001. Congener-

Independent Immunoassay for Microcystins and Nodularins. Environmental Science & Technology, 35 (24), pp 4849-4856. Available for purchase on the Internet at http://dx.doi.org/10.1021/es011182f.

McElhiney, J., and Lawton, L.A. 2005. Detection of the Cyanobacterial Hepatotoxins Microcystins. Toxicology and Applied Pharmacology, 203 (3): 219-230. Available for purchase on the Internet at http://dx.doi.org/10.1016/j.taap.2004.06.002.

Ohio EPA. 2015. Ohio EPA Total (Extracellular and Intracellular) Microcystins--Adda by ELISA Analytical Methodology. Version 2.0. January 2015. Available on the Internet at http://www.epa.ohio.gov/Portals/28/documents/habs/HAB_Analytical_Methodology.pdf.

SM Online. 2000a. SM 5310B-00--The Determination of Total Organic Carbon by High-Temperature Combustion Method. Standard Methods Online. Available for purchase on the Internet at http://www.standardmethods.org.

SM Online. 2000b. SM 5310C-00--Total organic carbon by Persulfate-UV or Heated-Persulfate Oxidation Method. Standard Methods Online. Available for purchase on the Internet at http://www.standardmethods.org.

SM Online. 2000c. SM 5310D-00--Total organic carbon by Wet-

Oxidation Method. Standard Methods Online. Available for purchase on the Internet at http://www.standardmethods.org.

SM. 2005a. SM 3125--Metals by Inductively Coupled Plasma/Mass Spectrometry. Standard Methods for the Examination of Water & Wastewater, 21st edition. American Public Health Association, 800 I Street NW., Washington, DC 20001-3710.

SM. 2005b. SM 5310B--The Determination of Total Organic Carbon by High-Temperature Combustion Method. Standard Methods for the Examination of Water & Wastewater, 21st edition. American Public Health Association, 800 I Street NW., Washington, DC 20001-3710.

SM. 2005c. SM 5310C-00--Total Organic Carbon by Persulfate-UV or Heated-Persulfate Oxidation Method. Standard Methods for the Examination of Water & Wastewater, 21st edition. American Public Health Association, 800 I Street NW., Washington, DC 20001-3710.

SM. 2005d. SM 5310D--Total Organic Carbon by Wet-Oxidation Method. Standard Methods for the Examination of Water & Wastewater, 21st edition. American Public Health Association, 800 I Street NW., Washington, DC 20001-3710.

SM Online. 2009. SM 3125-09--Metals by Inductively Coupled Plasma/Mass Spectrometry (Editorial revisions, 2011). Standard Methods Online. Available for purchase on the Internet at http://www.standardmethods.org.

USEPA. 1993. EPA Method 300.0--Determination of Inorganic Anions by Ion Chromatography Samples. Revision 2.1. Available on the Internet at http://www.nemi.gov.

USEPA. 1994. EPA Method 200.8--Determination of Trace Elements in Waters and Wastes by Inductively Coupled Plasma-Mass Spectrometry. Revision 5.4. Available on the Internet at http://www.nemi.gov/.

USEPA. 1997. EPA Method 300.1--Determination of Inorganic Anions in Drinking Water by Ion Chromatography. Revision 1.0. 1997. Available on the Internet at http://www.epa.gov/dwanalyticalmethods.

USEPA. 1998a. National Primary Drinking Water Regulations: Consumer Confidence Reports; Proposed Rule. Federal Register. Vol. 63, No. 30, p. 7606, February 13, 1998.

USEPA. 1998b. National Primary Drinking Water Regulation: Consumer Confidence Reports; Final Rule. Federal Register. Vol. 63, No. 160, p. 44512, August 19, 1998.

USEPA. 1999. Revisions to the Unregulated Contaminant Monitoring Regulation for Public Water Systems; Final Rule. Federal Register. Vol. 64, No. 180, p. 50556, September 17, 1999.

USEPA. 2001a. Statistical Design and Sample Selection for the Unregulated Contaminant Monitoring Regulation (1999). EPA 815-R-01-

004, August 2001.

USEPA. 2001b. EPA Method 317.0--Determination of Inorganic Oxyhalide Disinfection By-Products in Drinking Water Using Ion Chromatography with the Addition of a Postcolumn Reagent for Trace Bromate Analysis. Revision 2.0. EPA 815-B-01-001. Available on the Internet at http://www.epa.gov/dwanalyticalmethods.

USEPA. 2002. EPA Method 326.0--Determination of Inorganic Oxyhalide Disinfection By-Products in Drinking Water Using Ion Chromatography Incorporating the Addition of a Suppressor Acidified Postcolumn Reagent for Trace Bromate Analysis. Revision 1.0. EPA 815-R-03-007. Available on the Internet at http://www.epa.gov/dwanalyticalmethods.

USEPA. 2003. EPA Method 552.3--Determination of Haloacetic Acids and Dalapon in Drinking Water by Liquid-Liquid Microextraction, Derivatization, and Gas Chromatography with Electron Capture Detection. Revision 1.0. EPA 815-B-03-002, July 2003. Available on the Internet at http://www.epa.gov/dwanalyticalmethods.

USEPA. 2005. EPA Method 415.3--Determination of Total Organic Carbon and Specific UV Absorbance at 254 nm in Source Water and Drinking Water. Revision 1.1. EPA/600/R-05/055, February 2005. Available on the Internet at http://www.epa.gov/water-research/epa-drinking-water-research-methods.

USEPA. 2007. Unregulated Contaminant Monitoring Regulation (UCMR) for Public Water Systems Revisions. Federal Register. Vol. 72, No. 2, p. 368, January 4, 2007.

USEPA. 2009a. EPA Method 557--Determination of Haloacetic Acids, Bromate, and Dalapon in Drinking Water by Ion Chromatography Electrospray Ionization Tandem Mass Spectrometry (IC-ESI-MS/MS). Version 1.0. EPA 815-B-09-012, September 2009. Available on the Internet at http://www.epa.gov/dwanalyticalmethods.

Page 92684

USEPA. 2009b. EPA Method 415.3--Determination of Total Organic Carbon and Specific UV Absorbance at 254 nm in Source Water and Drinking Water. Revision 1.2. EPA/600/R-09/122, September 2009. Available on the Internet at http://www.epa.gov/water-research/epa-drinking-water-research-methods.

USEPA. 2009c. 2006 Community Water Survey. Volume II: Detailed Tables and Survey Methodology. EPA 815-R-09-002, May 2009. Available on the Internet at http://www.epa.gov/dwstandardsregulations/community-water-system-survey.

USEPA. 2012a. Revisions to the Unregulated Contaminant Monitoring Regulation (UCMR 3) for Public Water Systems; Final Rule. Federal Register. Vol. 77, No. 85, p. 26072, May 2, 2012.

USEPA. 2012b. EPA Method 525.3--Determination of Semivolatile Organic Chemicals in Drinking Water by Solid Phase Extraction and Capillary Column Gas Chromatography/Mass Spectrometry (GC/MS). Version 1.0. EPA/600/R-12/010, February 2012. Available on the Internet at http://www.epa.gov/water-research/epa-drinking-water-research-methods.

USEPA. 2013. Meetings and Materials for the Unregulated Contaminant Monitoring Program. Available on the Internet at http://www.epa.gov/dwucmr.

USEPA. 2014. Stakeholder Meeting Slides Regarding Revisions to the Unregulated Contaminant Monitoring Regulation. Available on the Internet at http://www.epa.gov/dwucmr.

USEPA. 2015a. Revisions to the Unregulated Contaminant Monitoring Rule (UCMR 4) for Public Water Systems and Announcement of a Public Meeting; Proposed Rule. Federal Register. Vol 80, No. 238, p. 76897, December 11, 2015.

USEPA. 2015b. EPA Method 544--Determination of Microcystins and Nodularin in Drinking Water by Solid Phase Extraction and Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS). Version 1.0. EPA-600-R-14/474, February 2015. Available on the Internet at http://www.epa.gov/water-research/epa-drinking-water-research-methods.

USEPA. 2015c. EPA Method 545--Determination of Cylindrospermopsin and Anatoxin-a in Drinking Water by Liquid Chromatography Electrospray Ionization Tandem Mass Spectrometry (LC/

ESI-MS/MS). EPA 815-R-15-009, April 2015. Available on the Internet at http://www.epa.gov/dwanalyticalmethods.

USEPA. 2015d. EPA Method 541--Determination of 1-Butanol, 1,4-

Dioxane, 2-Methoxyethanol And 2-Propen-1-ol in Drinking Water by Solid Phase Extraction and Gas Chromatography/Mass Spectrometry. EPA 815-R-15-011, November 2015. Available on the Internet at http://www.epa.gov/dwanalyticalmethods.

USEPA. 2015e. EPA Method 530--Determination of Select Semivolatile Organic Chemicals in Drinking Water by Solid Phase Extraction and Gas Chromatography/Mass Spectrometry (GC/MS). Version 1.0. EPA/600/R-14/442, January 2015. Available on the Internet at http://www.epa.gov/water-research/epa-drinking-water-research-methods.

USEPA. 2015f. Drinking Water Health Advisory for the Cyanobacterial Microcystin Toxins. EPA 820-R-15-100, June 2015. Available on the Internet at http://www.epa.gov/sites/production/files/2015-06/documents/microcystins-report-2015.pdf.

USEPA. 2016a. Information Collection Request for the Unregulated Contaminant Monitoring Rule (UCMR 4). EPA 815-B-16-019, November 2016.

USEPA. 2016b. Response to Comments Document for the Unregulated Contaminant Monitoring Rule (UCMR 4). EPA 815-R-16-002, October 2016.

USEPA. 2016c. UCMR 4 Contaminants--Information Compendium for Final Rule. EPA 815-B-16-020, October 2016.

USEPA. 2016d. UCMR 4 Laboratory Approval Requirements and Information Document. EPA 815-B-16-026, November 2016.

USEPA. 2016e. EPA Method 546--Determination of Total Microcystins and Nodularins in Drinking Water and Ambient Water by Adda Enzyme-Linked Immunosorbent Assay. EPA 815-B-16-011, August 2016. Available on the Internet at http://www.epa.gov/dwanalyticalmethods.

USEPA. 2016f. Meetings and Materials for the Unregulated Contaminant Monitoring Program. Available on the Internet at http://www.epa.gov/dwucmr/unregulated-contaminant-monitoring-rule-ucmr-meetings-and-materials.

Zeck, A., Weller, M.G., Bursill, D., Niessner, R. 2001. Generic Microcystin Immunoassay Based on Monoclonal Antibodies Against Adda. Analyst, 126: 2002-2007. Available for purchase on the Internet at http://dx.doi.org/10.1039/B105064H.

List of Subjects in 40 CFR Part 141

Environmental protection, Chemicals, Incorporation by reference, Indian-lands, Intergovernmental relations, Radiation protection, Reporting and recordkeeping requirements, Water supply.

Dated: December 8, 2016.

Gina McCarthy,

Administrator.

For the reasons set forth in the preamble, EPA amends 40 CFR part 141 as follows:

PART 141--NATIONAL PRIMARY DRINKING WATER REGULATIONS

0
1. The authority citation for part 141 continues to read as follows:
  
  Authority: 42 U.S.C. 300f, 300g-1, 300g-2, 300g-3, 300g-4, 300g-5, 300g-6, 300j-4, 300j-9, and 300j-11.
  
  Subpart D--Reporting and Recordkeeping
  
  0
2. In Sec. 141.35:
  
  0
  1. Revise the third sentence in paragraph (b)(1).
    
    0
  2. Revise the second and third sentences in paragraph (b)(2).
    
    0
  3. Remove ``October 1, 2012,'' and add in its place ``December 31, 2017,'' in paragraph (c)(1).
    
    0
  4. Revise the second and third sentences in paragraph (c)(2).
    
    0
  5. Revise the last sentence in paragraph (c)(3)(i).
    
    0
  6. Revise the fifth sentence in paragraph (c)(3)(ii).
    
    0
  7. Remove ``October 1, 2012,'' and add in its place April 19, 2017, in paragraph (c)(4).
    
    0
  8. Revise paragraphs (c)(5)(i), (c)(6) introductory text, (d)(2), and (e).
    
    The revisions and additions read as follows:
    
    Sec. 141.35 Reporting for unregulated contaminant monitoring results.
    
    * * * * *
    
    (b) * * *
    
    (1) * * * Information that must be submitted using EPA's electronic data reporting system must be submitted through: http://www.epa.gov/dwucmr. * * *
    
    (2) * * * If you have received a letter from EPA or your State concerning your required monitoring and your system does not meet the applicability criteria for UCMR established in Sec. 141.40(a)(1) or (2), or if a change occurs at your system that may affect your requirements under UCMR as defined in Sec. 141.40(a)(3) through (5), you must mail or email a letter to EPA, as specified in paragraph (b)(1) of this section. The letter must be from your PWS Official and must include your PWS Identification (PWSID) Code along with an explanation as to why the UCMR requirements are not applicable to your PWS, or have changed for your PWS, along with the appropriate contact information.* * *
    
    (c) * * *
    
    (2) * * * You must provide your sampling location(s) and inventory information by December 31, 2017, using EPA's electronic data reporting system. You must submit, verify or update the following information for each sampling location, or for each approved representative sampling location (as specified in paragraph (c)(3) of this section regarding representative sampling locations): PWSID Code; PWS Name; PWS Facility Identification Code; PWS Facility Name; PWS Facility Type; Water Source Type; Sampling Point Identification Code; Sampling Point Name; and Sampling Point Type Code; (as defined in Table 1 of paragraph (e) of this section).
    
    (3) * * *
    
    (i) * * * You must submit a copy of the existing alternate EPTDS sampling
    
    Page 92685
    
    plan or your representative well proposal, as appropriate, April 19, 2017, as specified in paragraph (b)(1) of this section.
    
    (ii) * * * You must submit the following information for each proposed representative sampling location: PWSID Code; PWS Name; PWS Facility Identification Code; PWS Facility Name; PWS Facility Type; Sampling Point Identification Code; and Sampling Point Name (as defined in Table 1, paragraph (e) of this section). * * *
    
    * * * * *
    
    (5) * * *
    
    (i) General rescheduling notification requirements. Large systems may change their monitoring schedules up to December 31, 2017, using EPA's electronic data reporting system, as specified in paragraph (b)(1) of this section. After this date has passed, if your PWS cannot sample according to your assigned sampling schedule (e.g., because of budget constraints, or if a sampling location will be closed during the scheduled month of monitoring), you must mail or email a letter to EPA, as specified in paragraph (b)(1) of this section, prior to the scheduled sampling date. You must include an explanation of why the samples cannot be taken according to the assigned schedule, and you must provide the alternative schedule you are requesting. You must not reschedule monitoring specifically to avoid sample collection during a suspected vulnerable period. You are subject to your assigned UCMR sampling schedule or the schedule that you revised on or before December 31, 2017, unless and until you receive a letter from EPA specifying a new schedule.
    
    * * * * *
    
    (6) Reporting monitoring results. For UCMR samples, you must report all data elements specified in Table 1 of paragraph (e) of this section, using EPA's electronic data reporting system. You also must report any changes, relative to what is currently posted, made to data elements 1 through 9 to EPA in writing, explaining the nature and purpose of the proposed change, as specified in paragraph (b)(1) of this section.
    
    * * * * *
    
    (d) * * *
    
    (2) Reporting sampling information. You must provide your sampling location(s) by December 31, 2017, using EPA's electronic data reporting system, as specified in paragraph (b)(1) of this section. If this information changes, you must report updates, including new sources and sampling locations that are put in use before or during the PWS' UCMR sampling period, to EPA's electronic data reporting system within 30 days of the change, as specified in paragraph (b)(1) of this section. You must record all data elements listed in Table 1 of paragraph (e) of this section on each sample form and sample bottle, as appropriate, provided to you by the UCMR Sampling Coordinator. You must send this information as specified in the instructions of your sampling kit, which will include the due date and return address. You must report any changes made in data elements 1 through 9 by emailing an explanation of the nature and purpose of the proposed change to EPA, as specified in paragraph (b)(1) of this section.
    
    (e) Data elements. Table 1 defines the data elements that must be provided for UCMR monitoring.
    
    Table 1--Unregulated Contaminant Monitoring Reporting Requirements
    
    ------------------------------------------------------------------------
    
    Data element Definition
    
    ------------------------------------------------------------------------
3. Public Water System The code used to identify each PWS.
  
  Identification (PWSID) Code. The code begins with the standard 2-
  
  character postal State abbreviation
  
  or Region code; the remaining 7
  
  numbers are unique to each PWS in
  
  the State. The same identification
  
  code must be used to represent the
  
  PWS identification for all current
  
  and future UCMR monitoring.
4. Public Water System Name....... Unique name, assigned once by the
  
  PWS.
5. Public Water System Facility An identification code established
  
  Identification Code. by the State or, at the State's
  
  discretion, by the PWS, following
  
  the format of a 5-digit number
  
  unique within each PWS for each
  
  applicable facility (i.e., for each
  
  source of water, treatment plant,
  
  distribution system, or any other
  
  facility associated with water
  
  treatment or delivery). The same
  
  identification code must be used to
  
  represent the facility for all
  
  current and future UCMR monitoring.
6. Public Water System Facility Unique name, assigned once by the
  
  Name. PWS, for every facility ID (e.g.,
  
  Treatment Plant).
7. Public Water System Facility That code that identifies that type
  
  Type. of facility as either:
  
  CC = consecutive connection.
  
  DS = distribution system.
  
  IN = source water influent.
  
  SS = sampling station.
  
  TP = treatment plant.
  
  OT = other.
8. Water Source Type.............. The type of source water that
  
  supplies a water system facility.
  
  Systems must report one of the
  
  following codes for each sampling
  
  location:
  
  SW = surface water (to be reported
  
  for water facilities that are
  
  served entirely by a surface water
  
  source during the twelve-month
  
  period).
  
  GW = ground water (to be reported
  
  for water facilities that are
  
  served entirely by a ground water
  
  source during the twelve-month
  
  period).
  
  GU = ground water under the direct
  
  influence of surface water (to be
  
  reported for water facilities that
  
  are served all or in part by ground
  
  water under the direct influence of
  
  surface water at any time during
  
  the twelve-month sampling period),
  
  and are not served at all by
  
  surface water during this period.
  
  MX = mixed water (to be reported for
  
  water facilities that are served by
  
  a mix of surface water, ground
  
  water and/or ground water under the
  
  direct influence of surface water
  
  during the twelve-month period).
9. Sampling Point Identification An identification code established
  
  Code. by the State, or at the State's
  
  discretion, by the PWS, that
  
  uniquely identifies each sampling
  
  point. Each sampling code must be
  
  unique within each applicable
  
  facility, for each applicable
  
  sampling location (i.e., entry
  
  point to the distribution system,
  
  source water influent or
  
  distribution system sample at
  
  maximum residence time). The same
  
  identification code must be used to
  
  represent the sampling location for
  
  all current and future UCMR
  
  monitoring.
10. Sampling Point Name............ Unique sample point name, assigned
  
  once by the PWS, for every sample
  
  point ID (e.g., Entry Point).
  
  Page 92686
11. Sampling Point Type Code....... A code that identifies the location
  
  of the sampling point as either:
  
  SR = source water taken from plant
  
  influent; untreated water entering
  
  the water treatment plant (i.e., a
  
  location prior to any treatment).
  
  EP = entry point to the distribution
  
  system.
  
  DS = distribution system sample.
12. Disinfectant Type............. All of the disinfectants/oxidants
  
  that have been added prior to the
  
  entry point to the distribution
  
  system. Please select all that
  
  apply:
  
  PEMB = Permanganate.
  
  HPXB = Hydrogen peroxide.
  
  CLGA = Gaseous chlorine.
  
  CLOF = Offsite Generated
  
  Hypochlorite (stored as a liquid
  
  form).
  
  CLON = Onsite Generated
  
  Hypochlorite.
  
  CAGC = Chloramine (formed with
  
  gaseous chlorine).
  
  CAOF = Chloramine (formed with
  
  offsite hypochlorite).
  
  CAON = Chloramine (formed with
  
  onsite hypochlorite).
  
  CLDB = Chlorine dioxide.
  
  OZON = Ozone.
  
  ULVL = Ultraviolet light.
  
  OTHD = All other types of
  
  disinfectant/oxidant.
  
  NODU = No disinfectant/oxidant used.
13. Treatment Information......... Treatment information associated
  
  with the sample point. Please
  
  select all that apply:
  
  CON = Conventional (non-softening,
  
  consisting of at least coagulation/
  
  sedimentation basins and
  
  filtration).
  
  SFN = Softening.
  
  RBF = River bank filtration.
  
  PSD = Pre-sedimentation.
  
  INF = In-line filtration.
  
  DFL = Direct filtration.
  
  SSF = Slow sand filtration.
  
  BIO = Biological filtration
  
  (operated with an intention of
  
  maintaining biological activity
  
  within filter).
  
  UTR = Unfiltered treatment for
  
  surface water source.
  
  GWD = Groundwater system with
  
  disinfection only.
  
  PAC = Application of powder
  
  activated carbon.
  
  GAC = Granular activated carbon
  
  adsorption (not part of filters in
  
  CON, SCO, INF, DFL, or SSF).
  
  AIR = Air stripping (packed towers,
  
  diffused gas contactors).
  
  POB = Pre-oxidation with chlorine
  
  (applied before coagulation for CON
  
  or SFN plants or before filtration
  
  for other filtration plants).
  
  MFL = Membrane filtration.
  
  IEX = Ionic exchange.
  
  DAF = Dissolved air floatation.
  
  CWL = Clear well/finished water
  
  storage without aeration.
  
  CWA = Clear well/finished water
  
  storage with aeration.
  
  ADS = Aeration in distribution
  
  system (localized treatment).
  
  OTH = All other types of treatment.
  
  NTU = No treatment used.
  
  DKN = Do not know.
14. Disinfectant Residual Type.... Disinfectant residual type in the
  
  distribution system for each HAA
  
  sample.
  
  CL2 = Chlorine (i.e., originating
  
  from addition of free chlorine
  
  only).
  
  CLO2 = chlorine dioxide.
  
  CLM = Chloramines (originating from
  
  with addition of chlorine and
  
  ammonia or pre-formed chloramines).
  
  CAC = Chlorine and chloramines (if
  
  being mixed from chlorinated and
  
  chloroaminated water).
  
  NOD = No disinfectant residual.
15. Sample Collection Date........ The date the sample is collected,
  
  reported as 4-digit year, 2-digit
  
  month, and 2-digit day (YYYY/MM/
  
  DD).
16. Sample Identification Code.... An alphanumeric value up to 30
  
  characters assigned by the
  
  laboratory to uniquely identify
  
  containers, or groups of
  
  containers, containing water
  
  samples collected at the same
  
  sampling location for the same
  
  sampling date.
17. Contaminant................... The unregulated contaminant for
  
  which the sample is being analyzed.
18. Analytical Method Code........ The identification code of the
  
  analytical method used.
19. Extraction Batch Laboratory assigned extraction batch
  
  Identification Code. ID. Must be unique for each
  
  extraction batch within the
  
  laboratory for each method. For CCC
  
  samples report the Analysis Batch
  
  Identification Code as the value
  
  for this field. For methods without
  
  an extraction batch, leave this
  
  field null.
20. Extraction Date............... Date for the start of the extraction
  
  batch (YYYY/MM/DD). For methods
  
  without an extraction batch, leave
  
  this field null.
21. Analysis Batch Identification Laboratory assigned analysis batch
  
  Code. ID. Must be unique for each
  
  analysis batch within the
  
  laboratory for each method.
22. Analysis Date................. Date for the start of the analysis
  
  batch (YYYY/MM/DD).
23. Sample Analysis Type.......... The type of sample collected and/or
  
  prepared, as well as the
  
  fortification level. Permitted
  
  values include:
  
  CF = concentration fortified; the
  
  concentration of a known
  
  contaminant added to a field sample
  
  reported with sample analysis types
  
  LFSM, LFSMD, LFB, CCC and QCS.
  
  CCC = continuing calibration check;
  
  a calibration standard containing
  
  the contaminant, the internal
  
  standard, and surrogate analyzed to
  
  verify the existing calibration for
  
  those contaminants.
  
  FS = field sample; sample collected
  
  and submitted for analysis under
  
  this rule.
  
  IS = internal standard; a standard
  
  that measures the relative response
  
  of contaminants.
  
  Page 92687
  
  LFB = laboratory fortified blank; an
  
  aliquot of reagent water fortified
  
  with known quantities of the
  
  contaminants and all preservation
  
  compounds.
  
  LRB = laboratory reagent blank; an
  
  aliquot of reagent water treated
  
  exactly as a field sample,
  
  including the addition of
  
  preservatives, internal standards,
  
  and surrogates to determine if
  
  interferences are present in the
  
  laboratory, reagents, or other
  
  equipment.
  
  LFSM = laboratory fortified sample
  
  matrix; a UCMR field sample with a
  
  known amount of the contaminant of
  
  interest and all preservation
  
  compounds added.
  
  LFSMD = laboratory fortified sample
  
  matrix duplicate; duplicate of the
  
  laboratory fortified sample matrix.
  
  QCS = quality control sample; a
  
  sample prepared with a source
  
  external to the one used for
  
  initial calibration and CCC. The
  
  QCS is used to check calibration
  
  standard integrity.
  
  QHS = quality HAA sample; HAA sample
  
  collected and submitted for quality
  
  control purposes.
  
  SUR = surrogate standard; a standard
  
  that assesses method performance
  
  for each extraction.
24. Analytical Results--Sign...... A value indicating whether the
  
  sample analysis result was:
  
  (

Subscribers can access the reported version of this case.

You can sign up for a trial and make the most of our service including these benefits.

Request your trial

Why Sign-up to vLex?

Over 100 Countries

Search over 120 million documents from over 100 countries including primary and secondary collections of legislation, case law, regulations, practical law, news, forms and contracts, books, journals, and more.
Thousands of Data Sources

Updated daily, vLex brings together legal information from over 750 publishing partners, providing access to over 2,500 legal and news sources from the world’s leading publishers.
Find What You Need, Quickly

Advanced A.I. technology developed exclusively by vLex editorially enriches legal information to make it accessible, with instant translation into 14 languages for enhanced discoverability and comparative research.
Over 2 million registered users

Founded over 20 years ago, vLex provides a first-class and comprehensive service for lawyers, law firms, government departments, and law schools around the world.

Subscribers are able to see a list of all the cited cases and legislation of a document.

You can sign up for a trial and make the most of our service including these benefits.

Request your trial

Why Sign-up to vLex?

Over 100 Countries

Search over 120 million documents from over 100 countries including primary and secondary collections of legislation, case law, regulations, practical law, news, forms and contracts, books, journals, and more.
Thousands of Data Sources

Updated daily, vLex brings together legal information from over 750 publishing partners, providing access to over 2,500 legal and news sources from the world’s leading publishers.
Find What You Need, Quickly

Advanced A.I. technology developed exclusively by vLex editorially enriches legal information to make it accessible, with instant translation into 14 languages for enhanced discoverability and comparative research.
Over 2 million registered users

Founded over 20 years ago, vLex provides a first-class and comprehensive service for lawyers, law firms, government departments, and law schools around the world.

Subscribers are able to see a list of all the documents that have cited the case.

You can sign up for a trial and make the most of our service including these benefits.

Request your trial

Why Sign-up to vLex?

Over 100 Countries

Search over 120 million documents from over 100 countries including primary and secondary collections of legislation, case law, regulations, practical law, news, forms and contracts, books, journals, and more.
Thousands of Data Sources

Updated daily, vLex brings together legal information from over 750 publishing partners, providing access to over 2,500 legal and news sources from the world’s leading publishers.
Find What You Need, Quickly

Advanced A.I. technology developed exclusively by vLex editorially enriches legal information to make it accessible, with instant translation into 14 languages for enhanced discoverability and comparative research.
Over 2 million registered users

Founded over 20 years ago, vLex provides a first-class and comprehensive service for lawyers, law firms, government departments, and law schools around the world.

Subscribers are able to see the revised versions of legislation with amendments.

You can sign up for a trial and make the most of our service including these benefits.

Request your trial

Why Sign-up to vLex?

Over 100 Countries

Search over 120 million documents from over 100 countries including primary and secondary collections of legislation, case law, regulations, practical law, news, forms and contracts, books, journals, and more.
Thousands of Data Sources

Updated daily, vLex brings together legal information from over 750 publishing partners, providing access to over 2,500 legal and news sources from the world’s leading publishers.
Find What You Need, Quickly

Advanced A.I. technology developed exclusively by vLex editorially enriches legal information to make it accessible, with instant translation into 14 languages for enhanced discoverability and comparative research.
Over 2 million registered users

Founded over 20 years ago, vLex provides a first-class and comprehensive service for lawyers, law firms, government departments, and law schools around the world.

Subscribers are able to see any amendments made to the case.

You can sign up for a trial and make the most of our service including these benefits.

Request your trial

Why Sign-up to vLex?

Over 100 Countries

Search over 120 million documents from over 100 countries including primary and secondary collections of legislation, case law, regulations, practical law, news, forms and contracts, books, journals, and more.
Thousands of Data Sources

Updated daily, vLex brings together legal information from over 750 publishing partners, providing access to over 2,500 legal and news sources from the world’s leading publishers.
Find What You Need, Quickly

Advanced A.I. technology developed exclusively by vLex editorially enriches legal information to make it accessible, with instant translation into 14 languages for enhanced discoverability and comparative research.
Over 2 million registered users

Founded over 20 years ago, vLex provides a first-class and comprehensive service for lawyers, law firms, government departments, and law schools around the world.

Subscribers are able to see a visualisation of a case and its relationships to other cases. An alternative to lists of cases, the Precedent Map makes it easier to establish which ones may be of most relevance to your research and prioritise further reading. You also get a useful overview of how the case was received.

Request your trial

Why Sign-up to vLex?

Over 100 Countries

Search over 120 million documents from over 100 countries including primary and secondary collections of legislation, case law, regulations, practical law, news, forms and contracts, books, journals, and more.
Thousands of Data Sources

Updated daily, vLex brings together legal information from over 750 publishing partners, providing access to over 2,500 legal and news sources from the world’s leading publishers.
Find What You Need, Quickly

Advanced A.I. technology developed exclusively by vLex editorially enriches legal information to make it accessible, with instant translation into 14 languages for enhanced discoverability and comparative research.
Over 2 million registered users

Founded over 20 years ago, vLex provides a first-class and comprehensive service for lawyers, law firms, government departments, and law schools around the world.

Subscribers are able to see the list of results connected to your document through the topics and citations Vincent found.

You can sign up for a trial and make the most of our service including these benefits.

Request your trial

Why Sign-up to vLex?

Over 100 Countries

Search over 120 million documents from over 100 countries including primary and secondary collections of legislation, case law, regulations, practical law, news, forms and contracts, books, journals, and more.
Thousands of Data Sources

Updated daily, vLex brings together legal information from over 750 publishing partners, providing access to over 2,500 legal and news sources from the world’s leading publishers.
Find What You Need, Quickly

Advanced A.I. technology developed exclusively by vLex editorially enriches legal information to make it accessible, with instant translation into 14 languages for enhanced discoverability and comparative research.
Over 2 million registered users

Founded over 20 years ago, vLex provides a first-class and comprehensive service for lawyers, law firms, government departments, and law schools around the world.

Revisions to the Unregulated Contaminant Monitoring Rule (UCMR 4) for Public Water Systems and Announcement of Public Meeting

You can sign up for a trial and make the most of our service including these benefits.

Why Sign-up to vLex?

Over 100 Countries

Thousands of Data Sources

Find What You Need, Quickly

Over 2 million registered users

You can sign up for a trial and make the most of our service including these benefits.

Why Sign-up to vLex?

Over 100 Countries

Thousands of Data Sources

Find What You Need, Quickly

Over 2 million registered users

You can sign up for a trial and make the most of our service including these benefits.

Why Sign-up to vLex?

Over 100 Countries

Thousands of Data Sources

Find What You Need, Quickly

Over 2 million registered users

You can sign up for a trial and make the most of our service including these benefits.

Why Sign-up to vLex?

Over 100 Countries

Thousands of Data Sources

Find What You Need, Quickly

Over 2 million registered users

You can sign up for a trial and make the most of our service including these benefits.

Why Sign-up to vLex?

Over 100 Countries

Thousands of Data Sources

Find What You Need, Quickly

Over 2 million registered users

Why Sign-up to vLex?

Over 100 Countries

Thousands of Data Sources

Find What You Need, Quickly

Over 2 million registered users

You can sign up for a trial and make the most of our service including these benefits.

Why Sign-up to vLex?

Over 100 Countries

Thousands of Data Sources

Find What You Need, Quickly

Over 2 million registered users