Service Rules Governing Narrowband Operations in the 769-775/799-805 MHz Bands
Federal Register, Volume 83 Issue 123 (Tuesday, June 26, 2018)
Federal Register Volume 83, Number 123 (Tuesday, June 26, 2018)
Rules and Regulations
Pages 29710-29712
From the Federal Register Online via the Government Publishing Office www.gpo.gov
FR Doc No: 2018-13700
=======================================================================
-----------------------------------------------------------------------
FEDERAL COMMUNICATIONS COMMISSION
47 CFR Parts 2 and 90
PS Docket No. 13-87; PS Docket No. 06-229, WT Docket No. 96-86, RM-
11433 and RM-11577, FCC 16-111
Service Rules Governing Narrowband Operations in the 769-775/799-
805 MHz Bands
AGENCY: Federal Communications Commission.
ACTION: Final rule; announcement of effective date.
-----------------------------------------------------------------------
SUMMARY: In this document, the Federal Communications Commission (Commission) announces that the Office of Management and Budget (OMB) has approved, for a period of three years, the information collection associated with the Commission's Service Rules Governing Narrowband Operations in the 769-775/799-805 MHz Bands Order on Reconsideration (Order). This document is consistent with the Order, which stated that the Commission would publish a document in the Federal Register announcing the effective date of those rules.
DATES: The amendments to 47 CFR 2.1033(c)(20) and 90.548(c) published at 81 FR 66830, September 29, 2016, are effective July 26, 2018.
FOR FURTHER INFORMATION CONTACT: John Evanoff, Policy and Licensing Division, Public Safety and Homeland Bureau, at (202) 418-0848, or email: email protected. For additional information concerning the information collection requirements contained in this document, send an email to email protected or contact Nicole Ongele, Office of Managing Director, Performance Evaluation and Records Management, 202-418-2991, or by email to email protected.
SUPPLEMENTARY INFORMATION: This document announces that, on March 13, 2017, OMB approved, for a period of three years, the information collection requirements relating to the 700 MHz interoperability testing rules contained in the Commission's Report and Order, FCC 16-
111, published at 81 FR 66830, Sept. 29, 2016. The OMB Control Number is 3060-0057. The Commission publishes this document as an
Page 29711
announcement of the effective date of the rules. If you have any comments on the burden estimates listed below, or how the Commission can improve the collections and reduce any burdens caused thereby, please contact Nicole Ongele, Federal Communications Commission, Room 1-A620, 445 12th Street SW, Washington, DC 20554. Please include the OMB Control Number, 3060-0057, in your correspondence. The Commission will also accept your comments via email at email protected.
To request materials in accessible formats for people with disabilities (Braille, large print, electronic files, audio format), send an email to email protected or call the Consumer and Governmental Affairs Bureau at (202) 418-0530 (voice), (202) 418-0432 (TTY).
Synopsis
As required by the Paperwork Reduction Act of 1995 (44 U.S.C. 3507), the FCC is notifying the public that it received final OMB approval on March 13, 2017, for the information collection requirements contained in the modifications to the Commission's rules in 47 CFR parts 2 and 90.
Under 5 CFR part 1320, an agency may not conduct or sponsor a collection of information unless it displays a current, valid OMB Control Number.
No person shall be subject to any penalty for failing to comply with a collection of information subject to the Paperwork Reduction Act that does not display a current, valid OMB Control Number. The OMB Control Number is 3060-0057.
The foregoing notice is required by the Paperwork Reduction Act of 1995, Public Law 104-13, October 1, 1995, and 44 U.S.C. 3507.
The total annual reporting burdens and costs for the respondents are as follows:
OMB Control Number: 3060-0057.
OMB Approval Date: March 13, 2017.
OMB Expiration Date: March 31, 2020.
OMB Control Number: 3060-0057.
Title: Application for Equipment Authorization, FCC Form 731.
Form Number: FCC Form 731.
Type of Review: Revision of a currently approved collection.
Respondents: Business or other for-profit entities, and state, local, or tribal government.
Number of Respondents and Responses: 3,740 respondents; 22,250 responses.
Estimated Time per Response: 35 hours.
Frequency of Response: On occasion reporting requirement and third party disclosure requirement.
Obligation to Respond: Required to obtain or retain benefits. Statutory authority for these collections are contained in Sections 4(i), 301, 302, 303(e), 303(f), and 303(r) of the Communications Act of 1934, as amended, 47 U.S.C. Sections 154(i), 301, 302, 303(e), 303(f), and 303(r).
Total Annual Burden: 778,750 hours.
Total Annual Cost: $34,465,000.
Privacy Act Impact Assessment: No impact(s).
Nature and Extent of Confidentiality: There is no need for confidentiality with this collection of information.
Needs and Uses: Commission rules require that manufacturers of certain radio frequency (RF) equipment file FCC Form 731 to obtain approval prior to marketing their equipment. Manufacturers may then market their RF equipment based on a showing of compliance with technical standards established in the FCC Rules for each type of equipment or device operated under the applicable FCC Rule part. The following types of equipment are regulated (a) the RF equipment is regulated under certain rule sections of 47 CFR part 15 and part 18, and (b) in addition, rules governing certain RF equipment operating in the licensed services also require equipment authorization as established in the procedural rules in 47 CFR part 2. The RF equipment manufacturers comply with the information collection requirements by (a) Filing FCC Form 731 electronically with the Commission, or (b) Submitting the information to a Telecommunications Certification Body (TCB), which acts on behalf of the FCC to issue grants of certification and may issue grants more expeditiously than the FCC. The TCBs have flexibility in the format in which they require the collection of information (i) TCBs may require applicants to submit the required information in FCC Form 731 format or in another format selected by the TCB, but (ii) whatever the information collection method, the information required is governed by the procedural rules in 47 CFR part 2 and a showing of compliance with the FCC technical standards for the specific type of equipment. RF manufacturer applicants for equipment certification may also request ``expedited authorization'' to market their equipment by: (a) Choosing to pay the fee levied by a TCB, and (b) submitting their request to a TCB in order for expedited authorization to market. The TCB processes the RF equipment manufacturer's application as follows: (i) The TCB receives and reviews the RF manufacturer's information submission/application; and (ii) the TCB enters the information into the FCC Equipment Authorization System database using an interface that provides the TCB with the tools to issue a standardized Grant of Equipment Authorization. Whichever method the RF manufacturers choose to submit their information--via either the FCC on FCC Form 731 or the TCB, FCC Rules require that applicants supply the following data: (a) Demographic information including Grantee name and address, contact information, etc.; (b) information specific to the equipment including FCC Identifier, equipment class, technical specifications, etc.; and (c) attachments that demonstrate compliance with FCC Rules that may include any combination of the following based on the applicable Rule parts for the equipment for which authorization is requested: (1) Identification of equipment (47 CFR 2.925); (2) attestation statements that may be required for specific equipment; (3) external photos of the equipment for which authorization is requested; (4) block diagram of the device; (5) schematics; (6) test report; (7) test setup photos; (8) Users Manual; (9) Internal Photos; (10) Parts List/Tune Up Information; (11) RF Exposure Information; (12) Operational Description; (13) Cover Letters; and, (14) Software Defined Radio/Cognitive Radio Files.
In general, an applicant's submission is as follows: (a) FCC Form 731 includes approximately two pages covering the demographic and equipment identification information; and (b) applicants must supply additional documentation and other information, as described above, demonstrating conformance with FCC Rules, which may range from 100-
1,000 pages. The supplemental information is essential to control potential interference to radio communications, which the FCC may use, as is necessary, to investigate complaints of harmful interference. In response to new technologies and in allocating spectrum, the Commission may establish new technical operating standards: (a) RF equipment manufacturers must meet the new standards to receive an equipment authorization, and (b) RF equipment manufacturers must still comply with the Commission's requirements in FCC Form 731 and demonstrate compliance as required by 47 CFR part 2 of FCC Rules. Thus, this information collection applies to a variety of RF equipment: (a) That is currently manufactured, (b) that may be manufactured in the future, and
Page 29712
(c) that operates under varying technical standards. On July 8, 2004, the Commission adopted a Report and Order, Modification of Parts 2 and 15 of the Commission's rules for Unlicensed Devices and Equipment Approval, ET Docket No. 03-201, FCC 04-165. The change requires that all paper filings required in 47 CFR Sections 2.913, 2.926(c), 2.929(c) and 2.929(d) of the rules are outdated and now must be filed electronically via the internet on FCC Form 731. The Commission believes that electronic filing speeds up application processing and supports the Commission in further streamlining to reduce cost and increase efficiency. Information on the procedures for electronically filing equipment authorization applications can be obtained from the Commission's rules, and from the internet at: http://transition.fcc.gov/oet/ea/ea-app-info.htm.
On August, 26, 2016, the Federal Communications Commission released an Order on Reconsideration, FCC 16-111, PS Docket No. 13-87 that modified Part 2 and Part 90 of the Rules for equipment approval and Private Land Mobile Radio Services. The amended rule requires all Wireless Communications Equipment Manufacturers who manufacture 700 MHz narrowband equipment capable of operating on the interoperability channels to demonstrate compliance with the Commission's Interoperability Technical Standards in 90.548. The Order on Reconsideration prescribed two methods stage for showing compliance with Section 90.548 after equipment authorization application approval and before the marketing and sale of equipment capable of operating on the 700 MHz narrowband interoperability channels. Specifically, the Commission modified Section 2.1033(c)(20) to provide that before equipment operating under 47 CFR part 90 and capable of operating on the 700 MHz interoperability channels (See 47 CFR 90.531(b)(1)) may be marketed or sold, the manufacturer thereof shall have a Compliance Assessment Program Supplier's Declaration of Conformity and Summary Test Report or, alternatively, a document detailing how the manufacturer determined that its equipment complies with 47 CFR 90.548 and that the equipment is interoperable across vendors. Submission of a 700 MHz narrowband radio for certification will constitute a representation by the manufacturer that the radio will be shown, by testing, to be interoperable across vendors before it is marketed or sold.
The Commission also modified Section 90.548(c) of the Commission's rules to provide that transceivers capable of operating on the interoperability channels listed in 47 CFR 90.531(b)(1) shall not be marketed or sold until the transceiver has previously been certified for interoperability by the Compliance Assessment Program (CAP) administered by the U.S. Department of Homeland Security; provided, however, that this requirement is suspended if the CAP is discontinued. Submission of a 700 MHz narrowband radio for certification will constitute a representation by the manufacturer that the radio will be shown, by testing, to be interoperable across vendors before it is marketed or sold. In the alternative, manufacturers may employ their own protocol for verifying compliance with Project 25 standards and determining that their product is interoperable among vendors. In the event that field experience reveals that a transceiver is not interoperable, the Commission may require the manufacturer thereof to provide evidence of compliance with 47 CFR 90.548.
To effectively implement the provisions of the new Rules, no modifications to the existing FCC Form 731 Application for Equipment Authorization are required. The changes are intended to simplify the filing process, ensure equipment complies with Project 25 standards and is interoperable across vendors. The following specific methods are proposed to ensure compliance with Section 90.548 and simplify filing processes for equipment manufacturers:
(1) The Order on Reconsideration establishes that before the marketing or sale of equipment designed to operate on the 700 MHz narrowband interoperability channels, manufacturers shall have a Compliance Assessment Program Supplier's Declaration of Conformity and Summary Test Report or, alternatively, a document detailing how the manufacturer determined that its equipment complies with Sec. 90.548 and that the equipment is interoperable across vendors. OMB has approved the information collections associated with P25 CAP compliance under OMB Control No. 1640-0015.\1\
---------------------------------------------------------------------------
\1\ Congressional direction for a P25 compliance assessment program can be found in the COPS Law Enforcement Technologies and Interoperable Communications Program section of the Conference Report to Public Law 109-148, as well as the Science & Technology Management and Administration section of Division E of the Conference Report to Public Law 110-161.
---------------------------------------------------------------------------
(2) In the event that field experience reveals that a transceiver is not interoperable, the Commission may require the manufacturer thereof to provide evidence of compliance with Sec. 90.548.
Federal Communications Commission.
Marlene Dortch,
Secretary, Office of the Secretary.
FR Doc. 2018-13700 Filed 6-25-18; 8:45 am
BILLING CODE 6712-01-P
