Antidumping: Stainless steel sheet and strip in coils from— Germany,

[Federal Register: December 13, 2006 (Volume 71, Number 239)]

[Notices]

[Page 74897-74900]

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

[DOCID:fr13de06-33]

DEPARTMENT OF COMMERCE

International Trade Administration

[A-428-825]

Stainless Steel Sheet and Strip in Coils From Germany; Notice of Final Results of Antidumping Duty Administrative Review

AGENCY: Import Administration, International Trade Administration, Department of Commerce.

ACTION: Notice of Final Results of Antidumping Duty Administrative Review.

SUMMARY: On August 8, 2006, the Department of Commerce (the Department) published the preliminary results of administrative review of the antidumping duty order covering stainless steel sheet and strip in coils from Germany. See Stainless Steel Sheet and Strip in Coils from Germany; Notice of Preliminary Results of Antidumping Duty Administrative Review, 71 FR 45024 (August 8, 2006) (Preliminary Results). The merchandise covered by this order is stainless steel sheet and strip in coils as described in the ``Scope of the Order'' section of this notice. The period of review (POR) is July 1, 2004, through June 30, 2005. In the Preliminary Results we invited parties to provide comments. Based on our analysis of the comments received, we have made changes to the margin calculation. Therefore, the final results differ from the preliminary results. The final weighted-average dumping margin for the reviewed firm is listed below in the section entitled ``Final Results of the Review.''

EFFECTIVE DATE: December 13, 2006.

FOR FURTHER INFORMATION CONTACT: Deborah Scott, Tyler Weinhold, or Robert James, AD/CVD Operations, Office 7, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482-2657, (202) 482-1121, and (202) 482-0649, respectively.

SUPPLEMENTARY INFORMATION:

Background

On August 8, 2006, the Department published the preliminary results of administrative review of the antidumping order covering stainless steel sheet and strip in coils from Germany. See Preliminary Results. In the Preliminary Results we invited parties to provide comments. In response, the Department received a case brief from German producers ThyssenKrupp Nirosta GmbH (ThyssenKrupp Nirosta), ThysssenKrupp Nirosta Prazisionsband GmbH (TKNP), ThyssenKrupp VDM GmbH (TKVDM), along with their affiliated U.S. importers ThyssenKrupp Nirosta North America, Inc. (TKNNA) and ThyssenKrupp VDM USA, Inc. (TKVDMUSA) (collectively, TKN) on September 7, 2006. Allegheny Ludlum, North American Stainless, United Auto Workers Local 3303, United Steelworkers of America, AFL- CIO/CLC, and Zanesville Armco Independent Organization (collectively, Petitioners) submitted a rebuttal brief on September 14, 2006. No party requested a hearing; accordingly, none was held.

Scope of the Order

The products covered by this order are certain stainless steel sheet and strip

[[Page 74898]]

in coils. Stainless steel is an alloy steel containing, by weight, 1.2 percent or less of carbon and 10.5 percent or more of chromium, with or without other elements. The subject sheet and strip is a flat-rolled product in coils that is greater than 9.5 mm in width and less than 4.75 mm in thickness, and that is annealed or otherwise heat treated and pickled or otherwise descaled. The subject sheet and strip may also be further processed (e.g., cold-rolled, polished, aluminized, coated, etc.) provided that it maintains the specific dimensions of sheet and strip following such processing. The merchandise subject to this order is currently classifiable in the Harmonized Tariff Schedule of the United States (HTSUS) at subheadings: 7219.13.0031, 7219.13.0051, 7219.13.0071, 7219.1300.81\1\, 7219.14.0030, 7219.14.0065, 7219.14.0090, 7219.32.0005, 7219.32.0020, 7219.32.0025, 7219.32.0035, 7219.32.0036, 7219.32.0038, 7219.32.0042, 7219.32.0044, 7219.33.0005, 7219.33.0020, 7219.33.0025, 7219.33.0035, 7219.33.0036, 7219.33.0038, 7219.33.0042, 7219.33.0044, 7219.34.0005, 7219.34.0020, 7219.34.0025, 7219.34.0030, 7219.34.0035, 7219.35.0005, 7219.35.0015, 7219.35.0030, 7219.35.0035, 7219.90.0010, 7219.90.0020, 7219.90.0025, 7219.90.0060, 7219.90.0080, 7220.12.1000, 7220.12.5000, 7220.20.1010, 7220.20.1015, 7220.20.1060, 7220.20.1080, 7220.20.6005, 7220.20.6010, 7220.20.6015, 7220.20.6060, 7220.20.6080, 7220.20.7005, 7220.20.7010, 7220.20.7015, 7220.20.7060, 7220.20.7080, 7220.20.8000, 7220.20.9030, 7220.20.9060, 7220.90.0010, 7220.90.0015, 7220.90.0060, and 7220.90.0080. Although the HTSUS subheadings are provided for convenience and customs purposes, the Department's written description of the merchandise under this order is dispositive.

\1\ Due to changes to the HTS numbers in 2001, 7219.13.0030, 7219.13.0050, 7219.13.0070, and 7219.13.0080 are now 7219.13.0031, 7219.13.0051, 7219.13.0071, and 7219.13.0081, respectively.

Excluded from the scope of the order are the following: (1) sheet and strip that is not annealed or otherwise heat treated and pickled or otherwise descaled, (2) sheet and strip that is cut to length, (3) plate (i.e., flat-rolled stainless steel products of a thickness of 4.75 mm or more), (4) flat wire (i.e., cold-rolled sections, with a prepared edge, rectangular in shape, of a width of not more than 9.5 mm), and (5) razor blade steel. Razor blade steel is a flat-rolled product of stainless steel, not further worked than cold-rolled (cold- reduced), in coils, of a width of not more than 23 mm and a thickness of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent chromium, and certified at the time of entry to be used in the manufacture of razor blades. See chapter 72 of the HTSUS, ``Additional U.S. Note'' 1(d).

Flapper valve steel is also excluded from the scope of the order. This product is defined as stainless steel strip in coils containing, by weight, between 0.37 and 0.43 percent carbon, between 1.15 and 1.35 percent molybdenum, and between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent, and sulfur of 0.020 percent or less. The product is manufactured by means of vacuum arc remelting, with inclusion controls for sulphide of no more than 0.04 percent and for oxide of no more than 0.05 percent. Flapper valve steel has a tensile strength of between 210 and 300 ksi, yield strength of between 170 and 270 ksi, plus or minus 8 ksi, and a hardness (Hv) of between 460 and 590. Flapper valve steel is most commonly used to produce specialty flapper valves in compressors.

Also excluded is a product referred to as suspension foil, a specialty steel product used in the manufacture of suspension assemblies for computer disk drives. Suspension foil is described as 302/304 grade or 202 grade stainless steel of a thickness between 14 and 127 microns, with a thickness tolerance of plus-or-minus 2.01 microns, and surface glossiness of 200 to 700 percent Gs. Suspension foil must be supplied in coil widths of not more than 407 mm, and with a mass of 225 kg or less. Roll marks may only be visible on one side, with no scratches of measurable depth. The material must exhibit residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm over 685 mm length.

Certain stainless steel foil for automotive catalytic converters is also excluded from the scope of this order. This stainless steel strip in coils is a specialty foil with a thickness of between 20 and 110 microns used to produce a metallic substrate with a honeycomb structure for use in automotive catalytic converters. The steel contains, by weight, carbon of no more than 0.030 percent, silicon of no more than 1.0 percent, manganese of no more than 1.0 percent, chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less than 0.002 or greater than 0.05 percent, and total rare earth elements of more than 0.06 percent, with the balance iron.

Permanent magnet iron-chromium-cobalt alloy stainless strip is also excluded from the scope of this order. This ductile stainless steel strip contains, by weight, 26 to 30 percent chromium, and 7 to 10 percent cobalt, with the remainder of iron, in widths 228.6 mm or less, and a thickness between 0.127 and 1.270 mm. It exhibits magnetic remanence between 9,000 and 12,000 gauss, and a coercivity of between 50 and 300 oersteds. This product is most commonly used in electronic sensors and is currently available under proprietary trade names such as ``Arnokrome III.''\2\

\2\ ``Arnokrome III'' is a trademark of the Arnold Engineering Company.

Also excluded from this order is a permanent magnet iron-chromium- cobalt stainless steel strip containing, by weight, 13 percent chromium, 6 percent cobalt, 71 percent iron, 6 percent nickel and 4 percent molybdenum. The product is supplied in widths up to 1.27 cm (12.7 mm), inclusive, with a thickness between 45 and 75 microns, inclusive. This product exhibits magnetic remanence between 400 and 780 nWb, and coercivity of between 60 and 100 oersteds. This product is currently supplied under the trade name ``SemiVac 90.''

Certain electrical resistance alloy steel is also excluded from the scope of this order. This product is defined as a non-magnetic stainless steel manufactured to American Society of Testing and Materials (ASTM) specification B344 and containing, by weight, 36 percent nickel, 18 percent chromium, and 46 percent iron, and is most notable for its resistance to high temperature corrosion. It has a melting point of 1390 degrees Celsius and displays a creep rupture limit of 4 kilograms per square millimeter at 1000 degrees Celsius. This steel is most commonly used in the production of heating ribbons for circuit breakers and industrial furnaces, and in rheostats for railway locomotives. The product is currently available under proprietary trade names such as ``Gilphy 36.''\3\

\3\ ``Gilphy 36'' is a trademark of Imphy, S.A.

Certain martensitic precipitation-hardenable stainless steel is also excluded from the scope of this order. This high-strength, ductile stainless steel product is designated under the Unified Numbering System (UNS) as

[[Page 74899]]

S45500-grade steel, and contains, by weight, 11 to 13 percent chromium, and 7 to 10 percent nickel. Carbon, manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel has copper, niobium, and titanium added to achieve aging, and will exhibit yield strengths as high as 1700 Mpa and ultimate tensile strengths as high as 1750 Mpa after aging, with elongation percentages of 3 percent or less in 50 mm. It is generally provided in thicknesses between 0.635 and 0.787 mm, and in widths of 25.4 mm. This product is most commonly used in the manufacture of television tubes and is currently available under proprietary trade names such as ``Durphynox 17.''\4\

\4\ ``Durphynox 17'' is a trademark of Imphy, S.A.

Finally, three specialty stainless steels typically used in certain industrial blades and surgical and medical instruments are also excluded from the scope of this order. These include stainless steel strip in coils used in the production of textile cutting tools (e.g., carpet knives).\5\ This steel is similar to AISI grade 420 but containing, by weight, 0.5 to 0.7 percent of molybdenum. The steel also contains, by weight, carbon of between 1.0 and 1.1 percent, sulfur of 0.020 percent or less, and includes between 0.20 and 0.30 percent copper and between 0.20 and 0.50 percent cobalt. This steel is sold under proprietary names such as ``GIN4 Mo.'' The second excluded stainless steel strip in coils is similar to AISI 420-J2 and contains, by weight, carbon of between 0.62 and 0.70 percent, silicon of between 0.20 and 0.50 percent, manganese of between 0.45 and 0.80 percent, phosphorus of no more than 0.025 percent and sulfur of no more than 0.020 percent. This steel has a carbide density on average of 100 carbide particles per 100 square microns. An example of this product is ``GIN5'' steel. The third specialty steel has a chemical composition similar to AISI 420 F, with carbon of between 0.37 and 0.43 percent, molybdenum of between 1.15 and 1.35 percent, but lower manganese of between 0.20 and 0.80 percent, phosphorus of no more than 0.025 percent, silicon of between 0.20 and 0.50 percent, and sulfur of no more than 0.020 percent. This product is supplied with a hardness of more than Hv 500 guaranteed after customer processing, and is supplied as, for example, ``GIN6.''\6\

\5\ This list of uses is illustrative and provided for descriptive purposes only.

\6\ ``GIN4 Mo,'' ``GIN5'' and ``GIN6'' are the proprietary grades of Hitachi Metals America, Ltd.

Analysis of Comments Received

All issues raised in TKN's case brief and in Petitioners' rebuttal brief are addressed in the Memorandum to David M. Spooner, Assistant Secretary for Import Administration (Decision Memorandum), dated December 6, 2006, which is hereby adopted by this notice. A list of the issues which parties have raised and to which we have responded, all of which are in the Decision Memorandum, is attached to this notice as an appendix. The Decision Memorandum is on file in room B-099 of the main Department of Commerce building. In addition, a complete version of the Decision Memorandum can be accessed directly on the Internet at http://www.ia.ita.doc.gov/frn/index.html. The paper copy and electronic

version of the Decision Memorandum are identical in content.

Changes Since the Preliminary Results

Based on our analysis of comments received, we have made changes to the margin calculation. The changes are listed below:

  1. For the preliminary results, we inadvertently treated indirect selling expenses incurred in Mexico on TKN's behalf as U.S. indirect selling expenses, and deducted them from CEP. For these final results, we have treated these expenses properly as foreign indirect selling expenses and have not deducted them from CEP. See Decision Memorandum at Comment 1.

  2. For the preliminary results we miscalculated the home market (HM) costs used in the CEP profit calculation by failing to convert HM quantity from metric tons to hundredweight. This had the effect of overstating the CEP profit rate and CEP profit, which is deducted from CEP. For these final results, we have recalculated these CM costs and CEP profit using the correct quantity amounts. See Decision Memorandum at Comment 2.

    Final Results of the Review

    We determine the following percentage weighted-average margin exists for the period July 1, 2004, through June 30, 2005:

    Weighted Average Margin Manufacturer / Exporter

    (percentage)

    TKN...........................................

    2.45

    Assessment

    The Department shall determine, and U.S. Bureau of Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries. In accordance with 19 CFR 351.212(b)(1), the Department calculates an assessment rate for each importer of the subject merchandise. Upon issuance of the final results of this review, if any importer-specific assessment rates calculated in the final results are above de minimis (i.e., at or above 0.5 percent), we will issue appraisement instructions directly to CBP to assess antidumping duties on appropriate entries by applying the assessment rate to the entered value of the merchandise. To determine whether the duty- assessment rate covering the period is de minimis, in accordance with the requirement set forth in 19 CFR 351.106(c)(2), we have calculated an importer-specific assessment ad valorem rate by aggregating the dumping margins calculated for all U.S. sales to each customer or importer and dividing this amount by the total entered value of these sales. Where the importer-specific ad valorem rate is greater than de minimis, and where the respondent has reported reliable entered values, we instruct CBP to apply the assessment rate to the entered value of the importer's entries during the POR. The Department intends to issue assessment instructions to CBP 15 days after the date of publication of the final results of review.

    The Department clarified its ``automatic assessment'' regulation on May 6, 2003. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003) (Assessment of Antidumping Duties). This clarification will apply to entries of subject merchandise during the period of review produced by the respondent for which it did not know its merchandise was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at hte all-others rate if there is no rate for the intermediate company (or companies) involved in the transaction. For a full discussion of this clarification, see Assessment of Antidumping Duties.

    Cash Deposit Requirements

    The following deposit requirements will be effective upon publication of this notice of final results of

    [[Page 74900]]

    administrative review for all shipments of stainless steel sheet and strip in coils from Germany entered, or withdrawn from warehouse, for consumption on or after the date of publication, as provided by section 751(a)(1) of the Tariff Act of 1930, as amended (the Tariff Act): (1) the cash deposit rate for the reviewed company will be the rate shown above; (2) for previously reviewed or investigated companies not listed above, the cash deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or the original less-than- fair-value (LTFV) investigation, but the manufacturer is, the cash deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; and (4) the cash deposit rate for all other manufacturers or exporters will continue to be 13.48 percent. This rate is the ``All Others'' rate from the amended final determination in the LTFV investigation of stainless steel sheet and strip in coils from Germany. See Stainless Steel Sheet and Strip in Coils From Germany: Amended Final Determination of Antidumping Duty Investigation, 67 FR 15178, 15179 (March 29, 2002).

    These deposit requirements shall remain in effect until publication of the final results of the next administrative review.

    Reimbursement

    This notice also serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping or countervailing duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping or countervailing duties occurred and the subsequent assessment of doubled antidumping duties.

    Notification Regarding Administrative Protective Orders

    This notice also serves as a reminder to parties subject to administrative protective orders (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.

    We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777(i) of the Tariff Act.

    Dated: December 6, 2006. David M. Spooner, Acting Assistant Secretaryfor Import Administration.

    Appendix

    Comments and Responses:

  3. Whether the Department properly deducted indirect selling expenses incurred in Mexico by an affiliate on behalf of respondent TKN from CEP.

  4. Whether the Department miscalculated the CEP profit rate and CEP profit.

  5. Whether the Department should grant a circumstance of sale adjustment to normal value for home market (HM) indirect selling expenses beyond the amount allowed under the CEP offset.

  6. Whether the Department should allow non-dumped sales to offset dumped sales in its margin calculation (zeroing)

    [FR Doc. E6-21197 Filed 12-12-06; 8:45 am]

    BILLING CODE 3510-DS-S

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT