Stainless Steel Sheet and Strip in Coils from Mexico: Final Results of Antidumping Duty Administrative Review,
[Federal Register: February 11, 2008 (Volume 73, Number 28)]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
DEPARTMENT OF COMMERCE
International Trade Administration
Stainless Steel Sheet and Strip in Coils from Mexico; Final Results of Antidumping Duty Administrative Review
AGENCY: Import Administration, International Trade Administration, Department of Commerce. SUMMARY: On August 6, 2007, the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty order on stainless steel sheet and strip in coils from Mexico. See Stainless Steel Sheet and Strip in Coils from Mexico; Preliminary Results of Antidumping Duty Administrative Review, 72 FR 43600 (August 6, 2007) (Preliminary Results). This review covers sales of subject merchandise made by ThyssenKrupp Mexinox S.A. de C.V. (Mexinox) for the period July 1, 2005 to June 30, 2006. Based on our analysis of the comments received, we have made changes in the margin calculation; therefore, the final results differ from the preliminary results. The final weighted-average dumping margin for the reviewed firm is listed below in the section entitled ``Final Results of Review.''
EFFECTIVE DATE: February 11, 2008.
FOR FURTHER INFORMATION CONTACT: Maryanne Burke or Robert James, AD/CVD Operations, Office 7, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: (202) 482- 5604 and (202) 482-0649, respectively.
On August 6, 2007, the Department published in the Federal Register the preliminary results of the administrative review of the antidumping duty order on stainless steel sheet and strip in coils from Mexico for the period July 1, 2005, to June 30, 2006. See Preliminary Results. In response to the Department's invitation to comment on the preliminary results of this review, Allegheny Ludlum Corporation, United Auto Workers Local 3303, Zanesville Armco Independent Organization, Inc. and the United Steelworkers of America (collectively, petitioners) and Mexinox filed their case briefs on November 13, 2007.\1\ Mexinox submitted its rebuttal
brief on November 19, 2007, while petitioners filed their rebuttal brief on November 20, 2007. Also, at Mexinox's request, the Department held a public hearing on December 6, 2007.
\1\ On September 11, 2007, we issued a memorandum stating that the Department would postpone the briefing schedule for the final results until cost verification reports were issued for Mexinox. See Memorandum to the File, dated September 11, 2007.
On September 4, 2007, we published in the Federal Register our notice partially extending the time limit for this review until January 10, 2008. See Stainless Steel Sheet and Strip in Coils from Mexico: Extension of Time Limit for Final Results of Antidumping Duty Administrative Review, 72 FR 50663 (September 4, 2007). On January 14, 2008, we published in the Federal Register our notice fully extending the time limit for this review until February 4, 2008. See Stainless Steel Sheet and Strip in Coils from Mexico: Second Extension of Time Limit for Final Results of Antidumping Duty Administrative Review, 73 FR 2222 (January 14, 2008).
Period of Review
The period of review (POR) is July 1, 2005 to June 30, 2006.
Scope of the Order
For purposes of this administrative review, the products covered are certain stainless steel sheet and strip in coils. Stainless steel is an alloy steel containing, by weight, 1.2 percent or less of carbon and 10.5 percent or more of chromium, with or without other elements. The subject sheet and strip is a flat-rolled product in coils that is greater than 9.5 mm in width and less than 4.75 mm in thickness, and that is annealed or otherwise heat treated and pickled or otherwise descaled. The subject sheet and strip may also be further processed (e.g., cold-rolled, polished, aluminized, coated, etc.) provided that it maintains the specific dimensions of sheet and strip following such processing. The merchandise subject to this order is currently classifiable in the Harmonized Tariff Schedule of the United States (HTSUS) at subheadings: 7219.13.0031, 7219.13.0051, 7219.13.0071, 7219.13.00.81, 7219.14.0030, 7219.14.0065, 7219.14.0090, 7219.32.0005, 7219.32.0020, 7219.32.0025, 7219.32.0035, 7219.32.0036, 7219.32.0038, 7219.32.0042, 7219.32.0044, 7219.33.0005, 7219.33.0020, 7219.33.0025, 7219.33.0035, 7219.33.0036, 7219.33.0038, 7219.33.0042, 7219.33.0044, 7219.34.0005, 7219.34.0020, 7219.34.0025, 7219.34.0030, 7219.34.0035, 7219.35.0005, 7219.35.0015, 7219.35.0030, 7219.35.0035, 7219.90.0010, 7219.90.0020, 7219.90.0025, 7219.90.0060, 7219.90.0080, 7220.12.1000, 7220.12.5000, 7220.20.1010, 7220.20.1015, 7220.20.1060, 7220.20.1080, 7220.20.6005, 7220.20.6010, 7220.20.6015, 7220.20.6060, 7220.20.6080, 7220.20.7005, 7220.20.7010, 7220.20.7015, 7220.20.7060, 7220.20.7080, 7220.20.8000, 7220.20.9030, 7220.20.9060, 7220.90.0010, 7220.90.0015, 7220.90.0060, and 7220.90.0080. Although the HTSUS subheadings are provided for convenience and customs purposes, the Department's written description of the merchandise under review is dispositive.
Excluded from the review of this order are the following: (1) sheet and strip that is not annealed or otherwise heat treated and pickled or otherwise descaled, (2) sheet and strip that is cut to length, (3) plate (i.e., flat-rolled stainless steel products of a thickness of 4.75 mm or more), (4) flat wire (i.e., cold-rolled sections, with a prepared edge, rectangular in shape, of a width of not more than 9.5 mm), and (5) razor blade steel. Razor blade steel is a flat-rolled product of stainless steel, not further worked than cold-rolled (cold- reduced), in coils, of a width of not more than 23 mm and a thickness of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent chromium, and certified at the time of entry to be used in the manufacture of razor blades. See chapter 72 of the HTSUS, ``Additional U.S. Note'' 1(d).
Flapper valve steel is also excluded from the scope of the order. This product is defined as stainless steel strip in coils containing, by weight, between 0.37 and 0.43 percent carbon, between 1.15 and 1.35 percent molybdenum, and between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent, and sulfur of 0.020 percent or less. The product is manufactured by means of vacuum arc remelting, with inclusion controls for sulphide of no more than 0.04 percent and for oxide of no more than 0.05 percent. Flapper valve steel has a tensile strength of between 210 and 300 ksi, yield strength of between 170 and 270 ksi, plus or minus 8 ksi, and a hardness (Hv) of between 460 and 590. Flapper valve steel is most commonly used to produce specialty flapper valves in compressors.
Also excluded is a product referred to as suspension foil, a specialty steel product used in the manufacture of suspension assemblies for computer disk drives. Suspension foil is described as 302/304 grade or 202 grade stainless steel of a thickness between 14 and 127 microns, with a thickness tolerance of plus-or-minus 2.01 microns, and surface glossiness of 200 to 700 percent Gs. Suspension foil must be supplied in coil widths of not more than 407 mm, and with a mass of 225 kg or less. Roll marks may only be visible on one side, with no scratches of measurable depth. The material must exhibit residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm over 685 mm length.
Certain stainless steel foil for automotive catalytic converters is also excluded from the scope of this order. This stainless steel strip in coils is a specialty foil with a thickness of between 20 and 110 microns used to produce a metallic substrate with a honeycomb structure for use in automotive catalytic converters. The steel contains, by weight, carbon of no more than 0.030 percent, silicon of no more than 1.0 percent, manganese of no more than 1.0 percent, chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less than 0.002 or greater than 0.05 percent, and total rare earth elements of more than 0.06 percent, with the balance iron.
Permanent magnet iron-chromium-cobalt alloy stainless strip is also excluded from the scope of this order. This ductile stainless steel strip contains, by weight, 26 to 30 percent chromium, and 7 to 10 percent cobalt, with the remainder of iron, in widths 228.6 mm or less, and a thickness between 0.127 and 1.270 mm. It exhibits magnetic remanence between 9,000 and 12,000 gauss, and a coercivity of between 50 and 300 oersteds. This product is most commonly used in electronic sensors and is currently available under proprietary trade names such as ``Arnokrome III.''\2\
\2\ ``Arnokrome III'' is a trademark of the Arnold Engineering Company.
Certain electrical resistance alloy steel is also excluded from the scope of this order. This product is defined as a non-magnetic stainless steel manufactured to American Society of Testing and Materials (``ASTM'') specification B344 and containing, by weight, 36 percent nickel, 18 percent chromium, and 46 percent iron, and is most notable for its resistance to high temperature corrosion. It has a melting point of 1390 degrees Celsius and displays a creep
rupture limit of 4 kilograms per square millimeter at 1000 degrees Celsius. This steel is most commonly used in the production of heating ribbons for circuit breakers and industrial furnaces, and in rheostats for railway locomotives. The product is currently available under proprietary trade names such as ``Gilphy 36.''\3\
\3\ ``Gilphy 36'' is a trademark of Imphy, S.A.
Certain martensitic precipitation-hardenable stainless steel is also excluded from the scope of this order. This high-strength, ductile stainless steel product is designated under the Unified Numbering System (``UNS'') as S45500-grade steel, and contains, by weight, 11 to 13 percent chromium, and 7 to 10 percent nickel. Carbon, manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel has copper, niobium, and titanium added to achieve aging, and will exhibit yield strengths as high as 1700 Mpa and ultimate tensile strengths as high as 1750 Mpa after aging, with elongation percentages of 3 percent or less in 50 mm. It is generally provided in thicknesses between 0.635 and 0.787 mm, and in widths of 25.4 mm. This product is most commonly used in the manufacture of television tubes and is currently available under proprietary trade names such as ``Durphynox 17.''\4\
\4\ ``Durphynox 17'' is a trademark of Imphy, S.A.
Finally, three specialty stainless steels typically used in certain industrial blades and surgical and medical instruments are also excluded from the scope of this order. These include stainless steel strip in coils used in the production of textile cutting tools (e.g., carpet knives).\5\ This steel is similar to AISI grade 420 but containing, by weight, 0.5 to 0.7 percent of molybdenum. The steel also contains, by weight, carbon of between 1.0 and 1.1 percent, sulfur of 0.020 percent or less, and includes between 0.20 and 0.30 percent copper and between 0.20 and 0.50 percent cobalt. This steel is sold under proprietary names such as ``GIN4 Mo.'' The second excluded stainless steel strip in coils is similar to AISI 420-J2 and contains, by weight, carbon of between 0.62 and 0.70 percent, silicon of between 0.20 and 0.50 percent, manganese of between 0.45 and 0.80 percent, phosphorus of no more than 0.025 percent and sulfur of no more than 0.020 percent. This steel has a carbide density on average of 100 carbide particles per 100 square microns. An example of this product is ``GIN5'' steel. The third specialty steel has a chemical composition similar to AISI 420 F, with carbon of between 0.37 and 0.43 percent, molybdenum of between 1.15 and 1.35 percent, but lower manganese of between 0.20 and 0.80 percent, phosphorus of no more than 0.025 percent, silicon of between 0.20 and 0.50 percent, and sulfur of no more than 0.020 percent. This product is supplied with a hardness of more than Hv 500 guaranteed after customer processing, and is supplied as, for example, ``GIN6.''\6\
\5\ This list of uses is illustrative and provided for descriptive purposes only.
\6\ ``GIN4 Mo,'' ``GIN5'' and ``GIN6'' are the proprietary grades of Hitachi Metals America, Ltd.
As provided in section 782(i) of the Tariff Act of 1930, as amended (the Tariff Act), we verified sales and cost information provided by Mexinox, using standard verification procedures such as the examination of relevant sales and financial records. Our verification results are outlined in the public and proprietary versions of our verification reports, which are on file in the Central Records Unit (CRU) in room 1117 of the main Department building. See ``Verification of the Sales Response of Mexinox in the Antidumping Duty Administrative Review of Stainless Steel Sheet and Strip in Coils from Mexico,'' dated August 16, 2007 (Sales Verification Report). See also ``Verification of the Cost Response of Mexinox in the Antidumping Duty Administrative Review of Stainless Steel Sheet and Strip in Coils from Mexico,'' dated November 2, 2007 (Cost Verification Report).
Analysis of Comments Received
All issues raised in the case and rebuttal briefs by parties to this administrative review are addressed in the Issues and Decision Memorandum (Decision Memorandum) from Stephen J. Claeys, Deputy Assistant Secretary for Import Administration, to David M. Spooner, Assistant Secretary for Import Administration, dated February 4, 2008, which is hereby adopted by this notice. A list of the issues which parties have raised and to which we have responded, all of which are in the Decision Memorandum, is attached to this notice as an appendix. Parties can find a complete discussion of all issues raised in this review and the corresponding recommendations in this public memorandum, which is on file in the CRU in room B-099 of the main Department building. In addition, a complete version of the Decision Memorandum can be accessed directly via the Internet at http://www.ia.ita.doc.gov/fm/index.html. The paper copy and electronic version of the Decision
Memorandum are identical in content.
Changes Since the Preliminary Results
Based on our analysis of the comments received, we have made the following changes to the margin calculation:
In accordance with the major input test we made adjustments to the reported costs of direct material costs for certain grades. See ``Cost of Production and Constructed Value Calculation Adjustments for the Final Results - ThyssenKrupp Mexinox S.A. de C.V., `` dated February 4, 2008 (Final Results Cost Calculation Memorandum).
We revised Mexinox's reported cost of production to include a certain depreciation expense related to a new production line installed during the POR. See id.
We revised Mexinox's and Ken-Mac Metal Inc.'s financial expense ratio to exclude certain interest income offsets from the numerator, and exclude packing from the denominator. See id.
We revised Mexinox's general and administrative expenses to exclude a portion of one of the income offsets originally claimed by Mexinox. See id. These changes are discussed in the relevant sections of the Decision Memorandum and Cost Calculation Memorandum. See also Memorandum to the File, ``Analysis of Data Submitted by ThyssenKrupp Mexinox S.A. de C.V (Mexinox) for the Final Results of Stainless Steel Sheet and Strip in Coils from Mexico (A-201-822)'' (Final Analysis Memorandum), dated February 4, 2008.
In addition, we have made changes made to Mexinox's reported cost database as a result of first day corrections identified by Mexinox during our cost verification. See Cost Verification Report at Exhibit 1.
Final Results of Review
We determine the following weighted-average percentage margin exists for the period July 1, 2005 to June 30, 2006:
Weighted Manufacturer / Exporter
Average Margin (percentage)
ThyssenKrupp Mexinox S.A. de C.V........................ 2.31 percent
The Department will determine, and U.S. Customs and Border Protection
(CBP) shall assess, antidumping duties on all appropriate entries, pursuant to section 751(a)(1) of the Tariff Act and 19 CFR 351.212(b). The Department calculated an assessment rate for each importer of the subject merchandise covered by the review. Upon issuance of the final results of this review, for any importer-specific assessment rates calculated in the final results that are above de minimis (i.e., at or above 0.50 percent), we will issue appraisement instructions directly to CBP to assess antidumping duties on appropriate entries by applying the assessment rate to the entered value of the merchandise. Pursuant to 19 CFR 356.8(a), the Department intends to issue assessment instructions to CBP 41 days after the date of publication of these final results of review.
The Department clarified its ``automatic assessment'' regulation on May 6, 2003. See Notice of Policy Concerning Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003). This clarification will apply to entries of subject merchandise during the POR produced by Mexinox for which Mexinox did not know the merchandise was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the 30.85 percent all-others rate if there is no company- specific rate for an intermediary involved in the transaction. See id. for a full discussion of this clarification.
Cash Deposit Requirements
The following cash deposit requirements will be effective upon publication of these final results for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of these final results of administrative review, consistent with section 751(a)(1) of the Tariff Act: (1) the cash deposit rate for the reviewed company will be the rate listed above; (2) if the exporter is not a firm covered in this review, but was covered in a previous review or the original less than fair value (LTFV) investigation, the cash deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or the original LTFV investigation, but the manufacturer is, the cash deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; and (4) the cash deposit rate for all other manufacturers or exporters will continue to be 30.85 percent, the all-others rate established in the LTFV investigation. See Notice of Amended Final Determination of Sales at Less Than Fair Value: Stainless Steel Sheet and Strip in Coils from Mexico, 64 FR 40560 (July 27, 1999). These deposit requirements, when imposed, shall remain in effect until publication of the final results of the next administrative review.
Notification to Interested Parties
This notice also serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Department's presumption that reimbursement of the antidumping duties occurred and the subsequent assessment of doubled antidumping duties.
This notice also serves as a reminder to parties subject to administrative protective orders (APOs) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305, which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.
This notice is issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Tariff Act.
Dated: February 4, 2008. David M. Spooner, Assistant Secretaryfor Import Administration.
Appendix - Issues in Decision Memorandum
Comment 1: Revocation
Comment 2: Offsetting for U.S. Sales that Exceed Normal Value
Adjustments to United States Price
Comment 3: U.S. Indirect Selling Expenses
Comment 4: Temporary Import Bonds
Adjustments to Normal Value
Comment 5: Handling Expense
Comment 6: Circumstance-of-Sale Adjustment
Cost of Production
Comment 7: Major Input Rule
Comment 8: Employee Profit Sharing
Comment 9: Year-End Inflation Adjustment to G&A
Comment 10: Depreciation
Comment 11: Interest Expense
Comment 12: Packing Expense
Comment 13: G&A Expense
[FR Doc. E8-2464 Filed 2-8-08; 8:45 am]
BILLING CODE 3510-DS-S