Standard on the Control of Hazardous Energy (Lockout/Tagout); Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements

Federal Register, Volume 82 Issue 210 (Wednesday, November 1, 2017)

Federal Register Volume 82, Number 210 (Wednesday, November 1, 2017)

Notices

Pages 50689-50691

From the Federal Register Online via the Government Publishing Office www.gpo.gov

FR Doc No: 2017-23743

=======================================================================

-----------------------------------------------------------------------

DEPARTMENT OF LABOR

Occupational Safety and Health Administration

Docket No. OSHA-2011-0033

Standard on the Control of Hazardous Energy (Lockout/Tagout); Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements

AGENCY: Occupational Safety and Health Administration (OSHA), Labor.

ACTION: Request for public comments.

-----------------------------------------------------------------------

SUMMARY: OSHA solicits public comments concerning its proposal to extend OMB approval of the information collection requirements specified in the Standard on the Control of Hazardous Energy (Lockout/

Tagout).

DATES: Comments must be submitted (postmarked, sent, or received) by January 2, 2018.

ADDRESSES: Electronically: You may submit comments and attachments electronically at http://www.regulations.gov, which is the Federal eRulemaking Portal. Follow the instructions online for submitting comments.

Facsimile: If your comments, including attachments, are not longer than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-

1648.

Mail, hand delivery, express mail, messenger, or courier service: When using this method, you must submit

Page 50690

three copies of your comments and attachments to the OSHA Docket Office, Docket No. OSHA-2011-0033, U.S. Department of Labor, Occupational Safety and Health Administration, Room N-3653, 200 Constitution Avenue NW., Washington, DC 20210. Deliveries (hand, express mail, messenger, and courier service) are accepted during the Department of Labor's and Docket Office's normal business hours, 10:00 a.m. to 3:00 p.m., e.t.

Instructions: All submissions must include the Agency name and OSHA docket number (OSHA-2011-0033) for the Information Collection Request (ICR). All comments, including any personal information you provide, are placed in the public docket without change, and may be made available online at http://www.regulations.gov. For further information on submitting comments, see the ``Public Participation'' heading in the section of this notice titled SUPPLEMENTARY INFORMATION.

Docket: To read or download comments or other material in the docket, go to http://www.regulations.gov or the OSHA Docket Office at the address above. All documents in the docket (including this Federal Register notice) are listed in the http://www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download through the Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. You may also contact Theda Kenney at the address below to obtain a copy of the ICR.

FOR FURTHER INFORMATION CONTACT: Theda Kenney or Todd Owen, Directorate of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609, 200 Constitution Avenue NW., Washington, DC 20210; telephone (202) 693-

2222.

SUPPLEMENTARY INFORMATION:

  1. Background

    The Department of Labor, as part of its continuing effort to reduce paperwork and respondent (i.e., employer) burden, conducts a preclearance consultation program to provide the public with an opportunity to comment on proposed and continuing information collection requirements in accordance with the Paperwork Reduction Act of 1995 (PRA) (44 U.S.C. 3506(c)(2)(A)). This program ensures that information is in the desired format, reporting burden (time and costs) is minimal, collection instruments are clearly understood, and OSHA's estimate of the information collection burden is accurate. The Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 et seq.) authorizes information collection by employers as necessary or appropriate for enforcement of the OSH Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires OSHA to obtain such information with minimum burden upon employers, especially those operating small businesses, and to reduce to the maximum extent feasible unnecessary duplication of efforts in obtaining information (29 U.S.C. 657).

    The standard specifies several information collection requirements. The following sections describe who uses the information collected under each requirement, as well as how they use it. The purpose of these requirements is to control the release of hazardous energy while workers service, maintain, or repair machines or equipment when activation, start up, or release of energy from an energy source is possible; proper control of hazardous energy prevents death or serious injury among these workers.

    Energy Control Procedure (paragraph (c)(4)(i)). With limited exception, employers must document the procedures used to isolate from its energy source and render inoperative, any machine or equipment prior to servicing, maintenance, or repair by workers. These procedures are necessary when activation, start up, or release of stored energy from the energy source is possible, and such release could cause injury to the workers.

    Paragraph (c)(4)(ii) states that the required documentation must clearly and specifically outline the scope, purpose, authorization, rules, and techniques workers are to use to control hazardous energy, and the means to enforce compliance. The document must include at least the following elements:

    (A) A specific statement regarding the use of the procedure;

    (B) Detailed procedural steps for shutting down, isolating, blocking, and securing machines or equipment to control hazardous energy;

    (C) Detailed procedural steps for placing, removing, and transferring lockout or tagout devices, including the responsibility for doing so; and

    (D) Requirements for testing a machine or equipment to determine and verify the effectiveness of lockout or tagout devices, as well as other energy control measures.

    Protective Materials and Hardware (paragraphs (c)(5)(ii)(D) and (c)(5)(iii)). Paragraph (c)(5)(ii)(D) requires that lockout and tagout devices indicate the identity of the employee applying it. Paragraph (c)(5)(iii) requires that tags warn against hazardous conditions if the machine or equipment is energized. In addition, the tag must include a legend such as one of the following: Do Not Start; Do Not Open; Do Not Close; Do Not Energize; Do Not Operate.

    Periodic Inspection Certification Records (paragraph (c)(6)(ii)). Under paragraph (c)(6)(i), employers are to conduct inspections of energy control procedures at least annually. An authorized worker (other than an authorized worker using the energy control procedure that is the subject of the inspection) is to conduct the inspection and correct any deviations or inadequacies identified. For procedures involving either lockout or tagout, the inspection must include a review, between the inspector and each authorized worker, of that worker's responsibilities under the procedure; for procedures using tagout systems, the review also involves affected workers, and includes an assessment of the workers' knowledge of the training elements required for these systems. Paragraph (c)(6)(ii) requires employers to certify the inspection by documenting the date of the inspection and identifying the machine or equipment inspected, the workers included in the inspection, and the worker who performed the inspection.

    Training Certification Records (paragraph (c)(7)(iv)). Under paragraph (c)(7)(iv), employers are to certify that workers completed the required training, and that this training is up-to-date. The certification is to contain each worker's name and the training date. Written certification of the training assures the employer that workers receive the training specified by the standard.

    Notification of Employees (paragraph (c)(9)). This provision requires the employer or authorized worker to notify affected workers prior to applying, and after removing, a lockout or tagout device from a machine or equipment.

    Off-Site Personnel (Contractors, etc.) (paragraph (f)(2)(i)). When the on-site employer uses an off-site employer (e.g., a contractor) to perform the activities covered by the scope and application of the standard, the two employers must inform each other regarding their respective lockout or tagout procedures.

  2. Special Issues for Comment

    OSHA has a particular interest in comments on the following issues:

    Whether the proposed information collection requirements are necessary

    Page 50691

    for the proper performance of the Agency's functions, including whether the information is useful;

    The accuracy of OSHA's estimate of the burden (time and costs) of the information collection requirements, including the validity of the methodology and assumptions used;

    The quality, utility, and clarity of the information collected; and

    Ways to minimize the burden on employers who must comply--

    for example, by using automated or other technological information collection and transmission techniques.

  3. Proposed Actions

    OSHA is requesting an adjustment increase of 102,613 burden hours (from 2,646,702 hours to 2,749,315 hours). This increase is a result of updated data showing an increase in the number of affected low-impact establishments (from 435,063 establishments to 461,523 establishments). In addition, OSHA is requesting an adjustment increase of $52,265 in operation and maintenance costs (from $1,426,421 to $1,478,686) associated with the purchase of tags and ties by employers. This increase is also a result of updated data showing an increase in the number of affected low-impact establishments.

    Type of Review: Extension of a currently approved collection.

    Title: Standard on the Control of Hazardous Energy (Lockout/Tagout) (29 CFR 1910.147).

    OMB Control Number: 1218-0150.

    Affected Public: Business or other for-profits.

    Number of Respondents: 754,348.

    Frequency: Initially; Annually; On occasion.

    Average Time per Response: Various.

    Estimated Number of Responses: 75,072,010.

    Estimated Total Burden Hours: 2,749,315.

    Estimated Cost (Operation and Maintenance): $1,478,686.

  4. Public Participation--Submission of Comments on This Notice and Internet Access to Comments and Submissions

    You may submit comments in response to this document as follows: (1) Electronically at http://www.regulations.gov, which is the Federal eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All comments, attachments, and other material must identify the Agency name and the OSHA docket number for the ICR (Docket No. OSHA-2011-0033). You may supplement electronic submissions by uploading document files electronically. If you wish to mail additional materials in reference to an electronic or facsimile submission, you must submit them to the OSHA Docket Office (see the section of this notice titled ADDRESSES). The additional materials must clearly identify your electronic comments by your name, date, and the docket number so the Agency can attach them to your comments.

    Because of security procedures, the use of regular mail may cause a significant delay in the receipt of comments. For information about security procedures concerning the delivery of materials by hand, express delivery, messenger, or courier service, please contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).

    Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about submitting personal information such as social security numbers and date of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted material) is not publicly available to read or download through this Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Information on using the http://www.regulations.gov Web site to submit comments and access the docket is available at the Web site's ``User Tips'' link. Contact the OSHA Docket Office for information about materials not available through the Web site, and for assistance in using the Internet to locate docket submissions.

  5. Authority and Signature

    Loren Sweatt, Deputy Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 1-2012 (77 FR 3912).

    Signed at Washington, DC, on October 26, 2017.

    Loren Sweatt,

    Deputy Assistant Secretary of Labor for Occupational Safety and Health.

    FR Doc. 2017-23743 Filed 10-31-17; 8:45 am

    BILLING CODE 4510-26-P

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT