Toxic and hazardous substances control: New chemicals; receipt and status information,

[Federal Register: February 25, 2000 (Volume 65, Number 38)]

[Notices]

[Page 10086-10091]

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

[DOCID:fr25fe00-84]

ENVIRONMENTAL PROTECTION AGENCY

[OPPTS-51941; FRL-6494-1]

Certain New Chemicals; Receipt and Status Information

AGENCY: Environmental Protection Agency (EPA).

ACTION: Notice.

SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 1, 2000 to January 14, 2000, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

ADDRESSES: Comments may be submitted by mail, electronically, or in person. Please follow the detailed instructions for each method as provided in Unit I. of the ``SUPPLEMENTARY INFORMATION.'' To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51941 and the specific PMN number in the subject line on the first page of your response.

FOR FURTHER INFORMATION CONTACT: Joe Carra, Deputy Director, Office of Pollution Prevention and Toxics (7401), Office of Pollution Prevention and Toxics, Environmental Protection Agency, Ariel Rios Bldg., 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone numbers: (202) 554-1404 and TDD: (202) 554-0551; e-mail address: TSCA-Hotline@epa.gov.

SUPPLEMENTARY INFORMATION:

1. General Information

   1. Does this Action Apply to Me?

      This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

      [[Page 10087]]

   2. How Can I Get Additional Information, Including Copies of this Document and Other Related Documents?

      1. Electronically. You may obtain copies of this document and certain other available documents from the EPA Internet Home Page at http://www.epa.gov/. On the Home Page select ``Laws and Regulations'' and then look up the entry for this document under the ``Federal Register--Environmental Documents.'' You can also go directly to the ``Federal Register'' listings at http://www.epa.gov/fedrgstr/.

      2. In person. The Agency has established an official record for this action under docket control number OPPTS-51941. The official record consists of the documents specifically referenced in this action, any public comments received during an applicable comment period, and other information related to this action, including any information claimed as confidential business information (CBI). This official record includes the documents that are physically located in the docket, as well as the documents that are referenced in those documents. The public version of the official record does not include any information claimed as CBI. The public version of the official record, which includes printed, paper versions of any electronic comments submitted during an applicable comment period, is available for inspection in the TSCA Nonconfidential Information Center, North East Mall Rm. B-607, Waterside Mall, 401 M St., SW., Washington, DC. The Center is open from noon to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number of the Center is (202) 260-7099.

   3. How and to Whom Do I Submit Comments?

      You may submit comments through the mail, in person, or electronically. To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51941 and the specific PMN number in the subject line on the first page of your response.

      1. By mail. Submit your comments to: Document Control Office (7407), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, Ariel Rios Bldg., 1200 Pennsylvania Ave., NW., Washington, DC 20460.

      2. In person or by courier. Deliver your comments to: OPPT Document Control Office (DCO) in East Tower Rm. G-099, Waterside Mall, 401 M St., SW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 260-7093.

      3. Electronically. You may submit your comments electronically by e-mail to: ``oppt.ncic@epa.gov,'' or mail your computer disk to the address identified in this unit. Do not submit any information electronically that you consider to be CBI. Electronic comments must be submitted as an ASCII file avoiding the use of special characters and any form of encryption. Comments and data will also be accepted on standard disks in WordPerfect 6.1/8.0 or ASCII file format. All comments in electronic form must be identified by docket control number OPPTS-51941 and the specific PMN number. Electronic comments may also be filedonline at many Federal Depository Libraries.

   4. How Should I Handle CBI that I Want to Submit to the Agency?

      Do not submit any information electronically that you consider to be CBI. You may claim information that you submit to EPA in response to this document as CBI by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public version of the official record. Information not marked confidential will be included in the public version of the official record without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under ``FOR FURTHER INFORMATION CONTACT.''

   5. What Should I Consider as I Prepare My Comments for EPA?

      You may find the following suggestions helpful for preparing your comments:

      1. Explain your views as clearly as possible.

      2. Describe any assumptions that you used.

      3. Provide copies of any technical information and/or data you used that support your views.

      4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

      5. Provide specific examples to illustrate your concerns.

      6. Offer alternative ways to improve the notice or collection activity.

      7. Make sure to submit your comments by the deadline in this document.

      8. To ensure proper receipt by EPA, be sure to identify the docket control number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

2. Why is EPA Taking this Action?

   Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 1, 2000 to January 14, 2000, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

3. Receipt and Status Report for PMNs

   This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

   In table I, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

   [[Page 10088]]

1. 75 Premanufacture Notices Received From: 1/1/00to 1/14/00

   Projected Notice End Case No.

   Received Date

   Date

   Manufacturer/Importer

   Use

   Chemical

   P-00-0389

   01/03/0004/02/00CBI

   (G) Coating component (G) Modified polyisocyanate P-00-0392

   01/05/0004/04/00Wacker Silicones (S) Plasters;

   (S) Neodecanoic acid, Corp.

   building adhesive; ethenyl ester, hydrophobic coatings polymer with ethene and ethenyl acetate* P-00-0393

   01/04/0004/03/00Finetex, Inc.

   (S) Textile fiber (S) Isostearyl lubricant with high benzoate* thermal stability, dispersant for tilanium doxide, zinc oxide, pigments, etc. plasticizer for selected polymer systems requiring high thermal stability P-00-0394

   01/06/0004/05/00Johnson Polymer

   (G) Open, non-

   (G) Acrylic emulsion dispersive use.

   polymer P-00-0395

   01/07/0004/06/00CBI

   (S) A radiation

   (G) Urethane acrylate curable coating for industrial use P-00-0396

   01/10/0004/09/00Eastman Chemical (S) Plastic additive (G) Substituted company

   phthalocyanine dye P-00-0397

   01/07/0004/06/00E.I. Du Pont De

   (S) Use or process in (S) 2- Nemours and Co.

   enclosed systems; piperidinone,1,3- electronic industry dimethyl-* cleaning solvent; other precision industry cleaning; paint stripping; metal cleaning and degreasing; ink formulations; adhesives; pigment dispersions; emulsifiable concentrate solvent; wetting agent and/or surfactant; coating agent for polymer emulsion coatings; hydrocarbon extraction; polymer synthesis; wire enamel resin; optics; aerospace; other defense industry; automotive manufacturing and similar P-00-0398

   01/07/0004/06/00E.I. Du Pont De

   (S) Use or process in (S) 2- Nemours and Co.

   enclosed systems; piperidinone,1,5- electronic industry dimethyl-* cleaning solvent; other precision industry cleaning; paint stripping; metal cleaning and degreasing; ink formulations; adhesives; pigment dispersions; emulsifiable concentrate solvent; wetting agent and/or surfactant; coating agent for polymer emulsion coatings; hydrocarbon extraction; polymer synthesis; wire enamel resin; optics; aerospace; other defense industry; automotive manufacturing and similar P-00-0399

   01/10/0004/09/00Englehard Corporation (S) A colorant for (G) Disazo yellow plastics P-00-0400

   01/10/0004/09/00CBI

   (G) Dye used in

   (S) 2,7- Thermal ink Jet

   naphthalenedisulfoni Printer

   c acid, 6-amino-4- hydroxy-3-[[7-sulfo- 4-[(4-sulfophenyl) azo]-1- naphthalenyl]azo]-, compd. with 2,2\1/ 4\,2 \1/4\\1/4\- nitrilotris [ethanol] (1:4) * P-00-0401

   01/10/0004/09/00Reichhold, Inc.

   (S) Pigment

   (G) Polyester resin dispersion carrier P-00-0402

   01/11/0004/10/00CBI

   (S) Resin for

   (S) Fatty acids, C14- printing inks

   18and C16-18- (offset printing) unsatd., polymers with isophthalic acid and trimethylolpropane* P-00-0403

   01/11/0004/10/00CBI

   (S) Polyurethane raw (S) Poly[oxy (methyl- material

   1,2-ethanediyl)], -hydro- omega-hydroxy-, ether with 2-ethyl-2- (hydroxymethyl)-1,3- propanediol* P-00-0404

   01/11/0004/10/00CBI

   (S) Polyurethane raw (S) Fatty acids, C18- material

   unsatd., dimers, di- me esters, hydrogenated, polymd. P-00-0405

   01/12/0004/11/00CBI

   (G) Processing aid (S) Benzenesufonic acid, bis (1- methylethyl)-, sodium salt* P-00-0406

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant on the acid complex. preparation of wire & cable P-00-0407

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant on the acid complex. preparation of wire & cable P-00-0408

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant on the acid complex. preparation of wire & cable

   [[Page 10089]]

   P-00-0409

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant on the acid complex. preparation of wire & cable P-00-0410

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant on the acid complex. preparation of wire & cable P-00-0411

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant on the acid complex. preparation of wire & cable P-00-0412

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant in the acid complex preparation of wire & cable P-00-0413

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant in the acid complex preparation of wire & cable P-00-0414

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant in the acid complex preparation of wire & cable P-00-0415

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant in the acid complex preparation of wire & cable P-00-0416

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant in the acid complex preparation of wire & cable P-00-0417

   01/12/0004/11/00CBI

   (S) Metalworking (G) Calcium fatty lubricant in the acid complex preparation of wire & cable P-00-0418

   01/18/0004/17/00CIBA Specialty

   (S) Hardener for (G) Alkyl amides, Chemicals Corp.

   protective epoxy from coatings for metal tetraethylenepentami surfaces; hardener ne for epoxy coatings for flooring or walls P-00-0419

   01/14/0004/13/00CBI

   (G) Copying material (G) Polycarbonate for printers and polyester copiers P-00-0420

   01/18/0004/17/00CBI

   (G) Colorant

   (G) Aromatic compound derivative P-00-0421

   01/18/0004/17/00CBI

   (G) Pigment

   (G) High molecular dispersant

   polymer with amino group P-00-0422

   01/18/0004/17/00CBI

   (G) Coating component (G) Non-volatile emulsion acrylic polymer P-00-0423

   01/18/0004/17/00King Industries, Inc. (S) Corrosion

   (G) inhibitor for

   Dinonylnaphthalenesu industrial

   lfonic acid compound lubricants;

   with amine corrosion inhibitor for rust preventive coatings P-00-0424

   01/18/0004/17/00King Industries, Inc. (S) Corrosion

   (G) inhibitor for

   Dinonylnaphthalenesu industrial

   lfonic acid compound lubricants;

   with amine corrosion inhibitor for rust preventive coatings P-00-0425

   01/19/0004/18/00Henkel Corp.,

   (G) Dispersing agent (S) Propanoic acid, 3- Chemicals Group

   hydroxy-2- (hydroxymethyl)-2- methyl-, polymer with 2,2\1/4\-[1,4- butanediylbis(oxymet hylene)] bis [oxirane], dihydro-3- (tetrapropenyl)- 2,5- furandione and -hydro- omega-hydroxypoly (oxy-1,2- ethanediyl), compd. with 2- (dimethylamino) ehthanol* P-00-0426

   01/18/0004/17/00DMC-2, L.P.

   (S) Flux paste used (G) Inorganic acid for brazing

   reaction product, with alkaline flouride metal salts P-00-0427

   01/11/0004/10/00CBI

   (G) Semiconductor (G) Hydrolyzed coatings component alkoxysilane P-00-0428

   01/11/0004/10/00CBI

   (G) Semiconductor (G) Hydrolyzed coatings component alkoxysilane P-00-0429

   01/18/0004/17/00Dyneon LLC

   (S) Fluoroelastomer (G) Fluoroelastomer for making molded parts P-00-0430

   01/18/0004/17/00CBI

   (G) Softener

   (G) Quaternized ammonium salt P-00-0431

   01/19/0004/18/00Eastman Kodak Company (G) Contained use in (G) Substituted an article

   alicyclic alkenyl benz[e]indolium salt P-00-0432

   01/19/0004/18/00Henkel Adhesives - A (S) Hot melt adhesive (S) Fatty acids, C18- Henkel Corporation designed for molding/ unsatd., dimers, Group

   potting.; general polymers with hot melt adhesive ethylenediamine, piperazine, polypropylene glycol diamine and sebacic acid* P-00-0433

   01/18/0004/17/00CBI

   (G) Pigment

   (G) Amine neutralized dispersant

   phosphated polyester P-00-0434

   01/24/0004/23/00CBI

   (S) Grease thickner (G) Alkyl substituted urea P-00-0435

   01/24/0004/23/00CBI

   (S) Chemical

   (G) Aminoalkyl intermediate

   polydimethylsiloxane P-00-0436

   01/21/0004/20/00CBI

   (G) Adhesive for (G) Polyester Flexible Substrates polyurethane P-00-0437

   01/21/0004/20/00CBI

   (G) Adhesive for (G) Polyester Flexible Substrates polyurethane

   [[Page 10090]]

   P-00-0438

   01/21/0004/20/00CIBA Specialty

   (S) Hardener for (S) Chemicals

   epoxy dielectric Oxiranemethanamine, Corporation

   insulation hardener n,n\1/4\- for pipe bonding (methylenedi-4,1- phenylene) bis [n- (oxiranylmethyl)-, polymer with 4,4\1/ 4\-methylenebis [2- methylcyclohexanamin e]* P-00-0439

   01/21/0004/20/00CBI

   (G) Oilfield polymer (G) Polymer of acrylamido alkyl propane sulfonic acid ammonium salt and two acrylic monomers P-00-0440

   01/21/0004/20/00CBI

   (G) Open non-

   (G) Polyester resin dispersive (polyester resin) P-00-0441

   01/24/0004/23/00CBI

   (G) Oil field

   (G) Alkyl glyceryl additive

   ether sulphonate P-00-0442

   01/24/0004/23/00CBI

   (G) Fertilizer

   (G) Zinc ammonium phosphate P-00-0443

   01/24/0004/23/00The Dow Chemical (G) Fuel additive and (G) Alkaryl Company

   chemical

   polyoxyalkylene intermediate

   derivative P-00-0444

   01/24/0004/23/00The Dow Chemical (G) Fuel additive and (G) Alkaryl Company

   chemical

   polyoxyalkylene intermediate

   derivative P-00-0445

   01/24/0004/23/00CBI

   (G) Open, non-

   (G) Polyester polyol dispersive use;polyurethane adhesives & sealants P-00-0446

   01/24/0004/23/00CBI

   (G) Open, non-

   (G) Polyester polyol dispersive use;polyurethane adhesives & sealants P-00-0447

   01/24/0004/23/00CBI

   (G) Open, non-

   (G) Polyester polyol dispersive use;polyurethane adhesives & sealants P-00-0448

   01/24/0004/23/00CBI

   (G) Processing aid (G) Titanium-aluminum complex on amorphous silica P-00-0449

   01/24/0004/23/00CBI

   (G) Processing aid (G) Titanium-aluminum complex on amorphous silica P-00-0450

   01/24/0004/23/00CBI

   (G) Processing aid (G) Titanium-aluminum complex on amorphous silica P-00-0451

   01/24/0004/23/00CBI

   (G) Processing aid (G) Titanium-aluminum complex on amorphous silica P-00-0452

   01/27/0004/26/00CBI

   (S) Vat dye doe

   (S) 3h-indol-3-one, 5- cellulosic fibers bomo-2-(5-bromo-1,3- dihydro-3-oxo-2h- indol-2-ylidene)-, 1,2-dihydro* P-00-0453

   01/27/0004/26/00Ashland Inc.

   (G) Open, non-

   (G) Unsaturated dispersive use in polyester molding operations P-00-0454

   01/28/0004/27/003M

   (S) Adhesive

   (G) Acrylate copolymer P-00-0455

   01/28/0004/27/00CBI

   (G) Contained use (G) Substituted pyridimium bromides P-00-0456

   02/01/0005/01/00Dyneon llc

   (S) Fluoroelastomer (G) Fluoroelastomer for molded parts P-00-0457

   01/28/0004/27/00CBI

   (G) Polymeric

   (G) Modified admixture for

   polyethercarboxylate concrete P-00-0458

   01/28/0004/27/00CBI

   (G) Polymeric

   (G) Modified admixture for

   polyethercarboxylate concrete P-00-0459

   01/28/0004/27/00CBI

   (G) Polymeric

   (G) Modified admixture for

   polyethercarboxylate concrete P-00-0460

   01/28/0004/27/00CBI

   (G) Polymeric

   (G) Modified admixture for

   polyethercarboxylate concrete P-00-0461

   01/28/0004/27/00CBI

   (G) Polymeric

   (G) Modified admixture for

   polyethercarboxylate concrete P-00-0462

   01/28/0004/27/00CBI

   (G) Polymeric

   (G) Modified admixture for

   polyethercarboxylate concrete P-00-0463

   02/01/0005/01/00CBI

   (G) Component of (G) Metal salt coating with open use P-00-0464

   02/01/0005/01/00CBI

   (G) Component of (G) Metal salt coating with open use P-00-0465

   02/01/0005/01/00CBI

   (S) Moisture curing (G) Isocyanate adhesive for book terminated urethane assembly; moisture polymer curing adhesive for wood laminating

   In table II, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:

2. 1 Test Marketing Exemption Notice Received From: 1/1/00to 1/14/00

   Projected Notice End Case No.

   Received Date

   Date

   Manufacturer/Importer

   Use

   Chemical

   T-00-0001

   01/07/0002/21/00CBI

   (G) Consumer product (G) Salt of ingredient

   substituted aliphatic benzenesulfonic acid

   [[Page 10091]]

   In table III, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

3. 43 Notices of Commencement From: 1/1/00to 1/14/00

   Commencement/Import Case No.

   Received Date

   Date

   Chemical

   P-00-0008

   01/21/0001/07/00(S) 2-propenoic acid, polymer with 1,3- butadiene, n- (hydroxymethyl)-2- propenamide and 2- propenenitrile* P-00-0055

   01/18/0001/13/00(G) Polyisobutylene oxime P-00-0056

   01/18/0001/13/00(G) Polyisobutylene oxime P-94-0961

   01/19/0012/22/99

   (G) Methylene diphenylene diisocyante (mdi) prepolymer P-95-1214

   01/03/0012/02/99

   (G) Polyether/polyester/ aromatic polyurethane P-96-0628

   01/18/0012/22/99

   (G) Neutralized polyacrylic resin P-96-1132

   01/18/0012/21/99

   (G) Vinyl modified nonionic surfactant P-98-1045

   01/10/0001/04/00(S) Oil, canola, polymerized, oxidized* P-98-1060

   01/24/0012/20/99

   (G) Mixed vegetable oil fatty acids P-98-1154

   01/19/0012/28/99

   (G) Reaction product of ethoxylated fatty amines and ammoniummolybate P-99-0166

   01/18/0012/20/99

   (G) Acrylate functional polyester P-99-0422

   01/07/0012/10/99

   (G) (polyalkoxy, polyester) modified acrylate, reaction product with poly (cyanoalkane-alkylene glycol) P-99-0655

   01/27/0012/23/99

   (G) 2- anthracenesulfonic acid, 4-[[4- (acetylamino) phenyl]amino]-1-amino- 9,10-dihydro-9,10- dioxo-, compd. with alkanol amine-alkylene oxide polymer P-99-0751

   01/24/0001/13/00(G) Polyester tetrafunctional acrylate P-99-0764

   01/24/0001/10/00(G) Ester modified melamine acrylate oligomer P-99-0818

   01/10/0011/29/99

   (G) Alkylphenol P-99-0830

   01/18/0012/27/99

   (G) Synthetic indigo solution P-99-0890

   01/27/0012/28/99

   (G) Alkanolamine carboxylate salts P-99-0891

   01/27/0012/28/99

   (G) Alkanolamine carboxylate salts P-99-0922

   01/18/0012/23/99

   (G) Polyacrylic resin P-99-0936

   01/04/0012/17/99

   (S) Fatty acids, C8-10, reaction products with epoxidized soybean oil, ethoxylated* P-99-1041

   01/12/0012/28/99

   (G) Pyrazolotriazolyl substituted acetamide P-99-1046

   01/10/0001/04/00(S) Octadecanoic acid, 12-(benzoyloxy)-, 2- ethylhexyl ester (9ci) * P-99-1051

   01/03/0012/16/99

   (G) Blocked polyurethane dispersion P-99-1070

   01/10/0012/16/99

   (G) Acrylic polymer on the basis of methyl methacrylate and n- butyl methacrylate P-99-1095

   01/06/0012/14/99

   (G) Perfluoropolyether derivative P-99-1101

   01/19/0001/10/00(G) Organo silane ester P-99-1109

   01/24/0001/12/00(S) Alcohols, C12-18, ethers with polyethylene glycol mono-bu ether* P-99-1152

   01/10/0012/23/99

   (G) Substituted aminophenol P-99-1153

   01/10/0012/19/99

   (G) Substituted aminophenol P-99-1154

   01/19/0001/08/00(G) Substituted hexanoic acids esters P-99-1156

   01/19/0001/10/00(G) Substituted oxazolidinedione P-99-1181

   01/18/0012/29/99

   (S) Morpholine, sulfate (2:1) * P-99-1237

   01/27/0001/05/00(G) Arylsulfonic acid, 2-[[6-[[4-chloro-6-[[4- [[2- (substituted]phenyl]am ino]-1,3,5-triazin-2- yl]amino]-1-hydroxy-3- sulfo-2- naphthalenyl]azo]-, sodium salt P-99-1249

   01/17/0012/14/99

   (G) Polyester acrylate P-99-1251

   01/10/0012/31/99

   (G) Tin-ii-carboxylate P-99-1296

   01/12/0012/26/99

   (G) Substituted phenyl butanoic acid P-99-1299

   01/14/0001/11/00(G) Amino epoxy silane P-99-1300

   01/12/0012/28/99

   (G) Substituted phenyl butanoyl chloride P-99-1316

   01/19/0012/17/99

   (G) Rosin modified phenolic resin P-99-1365

   01/13/0001/10/00(G) Aromatic polyurethane P-99-1370

   01/17/0001/14/00(G) Aromatic polyester polyurethane P-99-1387

   01/18/0001/04/00(G) Substituted aliphatic carboxylic acid

   List of Subjects

   Environmental protection, Chemicals, Premanufacturer notices.

   Dated: February 16, 2000. Deborah A. Williams, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.

   [FR Doc. 00-4420Filed2-24-00; 8:45 am]

   BILLING CODE 6560-50-F