Airworthiness Directives:
Federal Register Volume 76, Number 137 (Monday, July 18, 2011)
Rules and Regulations
Pages 42024-42029
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
FR Doc No: 2011-16559
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration 14 CFR Part 39
Docket No. FAA-2011-0257; Directorate Identifier 2010-NM-122-AD;
Amendment 39-16741; AD 2011-14-06
RIN 2120-AA64
Airworthiness Directives; Airbus Model A318, A319, A320, and A321
Series Airplanes
AGENCY: Department of Transportation (DOT), Federal Aviation
Administration (FAA).
ACTION: Final rule.
SUMMARY: We are superseding an existing airworthiness directive (AD)
Page 42025
that applies to the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
* * * * *
The issue 10 of Airbus A318/A319/A320/A321 ALI [Airworthiness
Limitation Items] Document and issue 2 of Airbus A319 Corporate Jet
ALI Document introduce more restrictive maintenance requirements/ airworthiness limitations. Failure to comply with this issue 10 constitutes an unsafe condition.
* * * * *
The unsafe condition is fatigue cracking, accidental damage, or corrosion in principal structural elements and possible failure of certain life limited parts, which could result in reduced structural integrity of the airplane. We are issuing this AD to require actions to correct the unsafe condition on these products.
DATES: This AD becomes effective August 22, 2011.
The Director of the Federal Register approved the incorporation by reference of certain publications listed in this AD as of August 22, 2011.
The Director of the Federal Register previously approved the incorporation by reference of certain other publications, listed in this AD as of November 7, 2007 (72 FR 56262, October 3, 2007).
ADDRESSES: You may examine the AD docket on the Internet at http://www.regulations.gov or in person at the U.S. Department of
Transportation, Docket Operations, M-30, West Building Ground Floor,
Room W12-140, 1200 New Jersey Avenue, SE., Washington, DC.
FOR FURTHER INFORMATION CONTACT: Tim Dulin, Aerospace Engineer,
International Branch, ANM-116, Transport Airplane Directorate, FAA, 1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone (425) 227-2141; fax (425) 227-1149.
SUPPLEMENTARY INFORMATION:
Discussion
We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to include an AD that would apply to the specified products.
That NPRM was published in the Federal Register on March 24, 2011 (76
FR 16582), and proposed to supersede AD 2007-20-05, Amendment 39-15215
(72 FR 56262, October 3, 2007).
Since we issued AD 2007-20-05, we have determined that more restrictive limitations are necessary. We have also added Model A318- 121 and -122 airplanes to the applicability. The European Aviation
Safety Agency (EASA), which is the Technical Agent for the Member
States of the European Community, has issued EASA Airworthiness
Directive 2010-0071R1, dated May 28, 2010 (referred to after this as
``the MCAI''), to correct an unsafe condition for the specified products. The MCAI states:
The airworthiness limitations are currently included in Airbus
A318/A319/A320/A321 Airworthiness Limitations Section (ALS).
The airworthiness limitations applicable to the Damage Tolerant
Airworthiness Limitation Items (DT ALI) are currently given in
Airbus A318/A319/A320/A321 ALI Document reference AI/SE-M4/95A.0252/ 96 and Airbus A319 Corporate Jet ALI Document reference AI/SE-M2/ 95A.1038/99, which are approved by the European Aviation Safety
Agency (EASA) and referenced in Airbus Airworthiness Limitations
Section (ALS) Part 2.
The issue 10 of Airbus A318/A319/A320/A321 ALI Document and issue 2 of Airbus A319 Corporate Jet ALI Document introduce more restrictive maintenance requirements/airworthiness limitations.
Failure to comply with this issue 10 constitutes an unsafe condition.
EASA AD 2010-0071 retains the requirements of EASA AD 2006-0165, which is superseded, and requires the implementation of more restrictive maintenance requirements/airworthiness limitations as specified in Airbus A318/A319/A320/A321 ALI Document reference AI/
SE-M4/95A.0252/96 issue 10 and Airbus A319 Corporate Jet ALI
Document reference AI/SE-M2/95A.1038/99.
This [EASA] AD has been revised to clarify the special compliance times defined in Table 1 of this [EASA] AD.
You may obtain further information by examining the MCAI in the AD docket.
Comments
We gave the public the opportunity to participate in developing this AD. We received no comments on the NPRM or on the determination of the cost to the public.
Revision to Airworthiness Limitation Items Document
Airbus has issued A318/A319/A320/A321 Airworthiness Limitation
Items, Document AI/SE-M4/95A.0252/96, Issue 11, dated September 2010.
Issue 11 of Airbus A318/A319/A320/A321 Airworthiness Limitation Items,
Document AI/SE-M4/95A.0252/96 does not add any additional burden on the operator. We have revised paragraphs (j) and (k), table 1, and Note 3, in this final rule to require compliance in accordance with Airbus
A318/A319/A320/A321 Airworthiness Limitation Items, Document AI/SE-M4/ 95A.0252/96, Issue 10, dated October 2009; or Issue 11, dated September 2010.
Conclusion
We reviewed the available data and determined that air safety and the public interest require adopting the AD with the changes described previously. We determined that these changes will not increase the economic burden on any operator or increase the scope of the AD.
Differences Between This AD and the MCAI or Service Information
We have reviewed the MCAI and related service information and, in general, agree with their substance. But we might have found it necessary to use different words from those in the MCAI to ensure the
AD is clear for U.S. operators and is enforceable. In making these changes, we do not intend to differ substantively from the information provided in the MCAI and related service information.
We might also have required different actions in this AD from those in the MCAI in order to follow our FAA policies. Any such differences are highlighted in a Note within the AD.
Costs of Compliance
We estimate that this AD will affect about 729 products of U.S. registry.
The actions that are required by AD 2007-20-05 and retained in this
AD take about 1 work-hour per product, at an average labor rate of $85 per work hour. Based on these figures, the estimated cost of the currently required actions is $85 per product.
We estimate that it will take about 1 work-hour per product to comply with the new basic requirements of this AD. The average labor rate is $85 per work-hour. Based on these figures, we estimate the cost of the AD on U.S. operators to be $61,965, or $85 per product.
Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. ``Subtitle VII: Aviation
Programs,'' describes in more detail the scope of the Agency's authority.
We are issuing this rulemaking under the authority described in
``Subtitle VII, Part A, Subpart III, Section 44701: General requirements.'' Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures
Page 42026
the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
We determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify this AD: 1. Is not a ''significant regulatory action'' under Executive Order 12866; 2. Is not a ''significant rule'' under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and 3. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
We prepared a regulatory evaluation of the estimated costs to comply with this AD and placed it in the AD docket.
Examining the AD Docket
You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the Docket Operations office between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains the NPRM, the regulatory evaluation, any comments received, and other information. The street address for the Docket Operations office (telephone (800) 647-5527) is in the
ADDRESSES section. Comments will be available in the AD docket shortly after receipt.
List of Subjects in 14 CFR Part 39
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.
Adoption of the Amendment
Accordingly, under the authority delegated to me by the
Administrator, the FAA amends 14 CFR part 39 as follows:
PART 39--AIRWORTHINESS DIRECTIVES 0 1. The authority citation for part 39 continues to read as follows:
Authority: 49 U.S.C. 106(g), 40113, 44701.
Sec. 39.13 [Amended] 0 2. The FAA amends Sec. 39.13 by removing Amendment 39-15215 (72 FR 56262, October 3, 2007) and adding the following new AD: 2011-14-06 Airbus: Amendment 39-16741. Docket No. FAA-2011-0257;
Directorate Identifier 2010-NM-122-AD.
Effective Date
(a) This airworthiness directive (AD) becomes effective August 22, 2011.
Affected ADs
(b) This AD supersedes AD 2007-20-05, Amendment 39-15215.
Applicability
(c) This AD applies to all Airbus Model A318-111, -112, -121, and -122 airplanes; Model A319-111, -112, -113, -114, -115, -131, - 132, and -133 airplanes; Model A320-111, -211, -212, -214, -231, - 232, and -233 airplanes; and Model A321-111, -112, -131, -211, -212,
-213, -231, and -232 airplanes; certificated in any category.
Note 1: This AD requires revisions to certain operator maintenance documents to include new inspections. Compliance with these inspections is required by 14 CFR 91.403(c). For airplanes that have been previously modified, altered, or repaired in the areas addressed by these inspections, the operator may not be able to accomplish the inspections described in the revisions. In this situation, to comply with 14 CFR 91.403(c), the operator must request approval for an alternative method of compliance according to paragraph (n) of this AD. The request should include a description of changes to the required inspections that will ensure the continued damage tolerance of the affected structure. The FAA has provided guidance for this determination in Advisory Circular
(AC) 25.1529-1.
Subject
(d) Air Transport Association (ATA) of America Code 05: Wings.
Reason
(e) The mandatory continuing airworthiness information (MCAI) states:
* * * * *
The issue 10 of Airbus A318/A319/A320/A321 ALI [Airworthiness
Limitation Items] Document and issue 2 of Airbus A319 Corporate Jet
ALI Document introduce more restrictive maintenance requirements/ airworthiness limitations. Failure to comply with this issue 10 constitutes an unsafe condition.
* * * * *
The unsafe condition is fatigue cracking, accidental damage, or corrosion in principal structural elements and possible failure of certain life limited parts, which could result in reduced structural integrity of the airplane.
Compliance
(f) You are responsible for having the actions required by this
AD performed within the compliance times specified, unless the actions have already been done.
Restatement of Requirements of AD 2007-20-05: Revise Airworthiness
Limitations Section (ALS) To Incorporate Safe Life ALIs
(g) For Model A318-111 and -112 airplanes; Model A319-111, -112,
-113, -114, -115, -131, -132, and -133 airplanes; Model A320-111, - 211, -212, -214, -231, -232, and -233 airplanes; and Model A321-111,
-112, -131, -211, -212, -213, -231, and -232 airplanes: Within 3 months after November 7, 2007 (the effective date of AD 2007-20-05), revise the ALS of the Instructions for Continued Airworthiness to incorporate Sub-part 1-2, ``Life Limits,'' and Sub-part 1-3,
``Demonstrated Fatigue Lives,'' of Airbus A318/A319/A320/A321 ALS
Part 1--Safe Life Airworthiness Limitation Items, dated February 28, 2006. Accomplish the actions in Sub-part 1-2, ``Life Limits,'' and
Sub-part 1-3, ``Demonstrated Fatigue Lives,'' of Airbus A318/A319/
A320/A321 ALS Part 1--Safe Life Airworthiness Limitation Items, dated February 28, 2006, at the times specified in Sub-part 1-2,
``Life Limits,'' and Sub-part 1-3, ``Demonstrated Fatigue Lives,'' of Airbus A318/A319/A320/A321 ALS Part 1--Safe Life Airworthiness
Limitation Items, dated February 28, 2006, except as provided by paragraph (i) of this AD.
Revise ALS To Incorporate Damage-Tolerant ALIs
(h) For Model A318-111 and -112 airplanes; Model A319-111, -112,
-113, -114, -115, -131, -132, and -133 airplanes; Model A320-111, - 211, -212, -214, -231, -232, and -233 airplanes; and Model A321-111,
-112, -131, -211, -212, -213, -231, and -232 airplanes; except Model
A319 airplanes on which Airbus Modifications 28238, 28162, and 28342 have been incorporated in production: Within 14 days after November 7, 2007, revise the ALS of the Instructions for Continued
Airworthiness to incorporate Airbus A318/A319/A320/A321
Airworthiness Limitation Items, Document AI/SE-M4/95A.0252/96, Issue 7, dated December 2005 (approved by the EASA on February 7, 2006);
Issue 08, dated March 2006 (approved by the EASA on January 4, 2007); or Issue 09, dated November 2006 (approved by the EASA on May 21, 2007). Accomplish the actions in Airbus A318/A319/A320/A321
Airworthiness Limitation Items, Document AI/SE-M4/95A.0252/96, Issue 7, dated December 2005; Issue 08, dated March 2006; or Issue 09, dated November 2006; at the times specified in Airbus A318/A319/
A320/A321 Airworthiness Limitation Items, Document AI/SE-M4/ 95A.0252/96, Issue 7, dated December 2005; Issue 08, dated March 2006; or Issue 09, dated November 2006; as applicable; except as provided by paragraph (i) of this AD. Doing the actions required by paragraph (j) of this AD terminates the requirements of this paragraph.
Grace Period for New or More Restrictive Actions
(i) For Model A318-111 and -112 airplanes; Model A319-111, -112,
-113, -114, -115, -131, -132, and -133 airplanes; Model A320-111, - 211, -212, -214, -231, -232, and -233 airplanes; and Model A321-111,
-112, -131, -211, -212, -213, -231, and
Page 42027
-232 airplanes: For any new or more restrictive life limit introduced with Sub-part 1-2, ``Life Limits,'' and Sub-part 1-3,
``Demonstrated Fatigue Lives,'' of Airbus A318/A319/A320/A321 ALS
Part 1--Safe Life Airworthiness Limitation Items, dated February 28, 2006, replace the part at the time specified in Sub-part 1-2, ``Life
Limits,'' and Sub-part 1-3, ``Demonstrated Fatigue Lives,'' of
Airbus A318/A319/A320/A321 ALS Part 1--Safe Life Airworthiness
Limitation Items, dated February 28, 2006, or within 6 months after
November 7, 2007, whichever is later. For any new or more restrictive inspection introduced with Airbus A318/A319/A320/A321
Airworthiness Limitation Items, Document AI/SE-M4/95A.0252/96, Issue 7, dated December 2005; Issue 08, dated March 2006; or Issue 09, dated November 2006; do the inspection at the time specified in
Airbus A318/A319/A320/A321 Airworthiness Limitation Items, Document
AI/SE-M4/95A.0252/96, Issue 7, dated December 2005; Issue 08, dated
March 2006; or Issue 09, dated November 2006; as applicable; or within 6 months after November 7, 2007, whichever is later.
New Requirements of This AD: Revise ALS To Incorporate Damage-Tolerant
ALIs With Revised Compliance Times
(j) Within 9 months after the effective date of this AD: Revise the maintenance program by incorporating all maintenance requirements and associated airworthiness limitations specified in the Airbus A318/A319/A320/A321 Airworthiness Limitation Items,
Document AI/SE-M4/95A.0252/96, Issue 10, dated October 2009; or
Issue 11, dated September 2010. Comply with all applicable maintenance requirements and associated airworthiness limitations included in Airbus A318/A319/A320/A321 Airworthiness Limitation
Items, Document AI/SE-M4/95A.0252/96, Issue 10, dated October 2009; or Issue 11, dated September 2010; except as provided by paragraph
(k) of this AD. Doing the actions required by this paragraph terminates the requirements of paragraph (h) of this AD.
Special Compliance Times for Certain Tasks
(k) For new and more restrictive tasks introduced with Airbus
A318/A319/A320/A321 Airworthiness Limitation Items, Document AI/SE-
M4/95A.0252/96, Issue 10, dated October 2009; or Issue 11, dated
September 2010; as specified in table 1 of this AD: The initial compliance time for doing the tasks is specified in table 1 of this
AD.
Table 1--Compliance Times for New Tasks
Task
Applicability
Compliance time, whichever occurs later
(as specified in the applicability column of the task).
545102-01-6...................... Group 19-1A CFM, Group 19- The threshold as defined Within 2,000 flight 1B CFM, and Model A320- in Airbus A318/A319/
cycles or 5,500 flight 200 airplanes with CFM
A320/A321 Airworthiness hours, after the
Industrial (CFM)/
Limitation Items,
effective date of this
International Aero
Document AI/SE-M4/
AD, whichever occurs
Engine (IAE) engines.
95A.0252/96, Issue 10, first. dated October 2009; or
Issue 11, dated
September 2010. 545102-01-7...................... Model A320-100........... The threshold as defined Within 2,000 flight in Airbus A318/A319/
cycles or 2,000 flight
A320/A321 Airworthiness hours, after the
Limitation Items,
effective date of this
Document AI/SE-M4/
AD, whichever occurs 95A.0252/96, Issue 10, first. dated October 2009; or
Issue 11, dated
September 2010. 572050-01-1 or alternative task
Group 19-1A and Group 19- At the time of the next Within 6 months after 572050-02-1.
1B.
due accomplishment of
the effective date of any one of the tasks
this AD. 572004, 572020, or 572053 as currently described in the Airbus
A318/A319/A320/A321
Airworthiness
Limitation Items,
Document AI/SE-M4/ 95A.0252/96, Issue 7, dated December 2005;
Issue 08, dated March 2006; or Issue 09, dated November 2006. 572050-01-4 or alternative task
Model A320-200........... At the time of the next Within 6 months after 572050-02-4.
due accomplishment of
the effective date of any one of the tasks
this AD. 572004, 572020, or 572053 as currently described in the Airbus
A318/A319/A320/A321
Airworthiness
Limitation Items,
Document AI/SE-M4/ 95A.0252/96, Issue 7, dated December 2005;
Issue 08, dated March 2006; or Issue 09, dated November 2006. 572050-01-5 or alternative task
Group 21-1A.............. At the time of the next Within 6 months after 572050-02-5.
due accomplishment of
the effective date of any one of the tasks
this AD. 572004, 572020, or 572053 as currently described in the Airbus
A318/A319/A320/A321
Airworthiness
Limitation Items,
Document AI/SE-M4/ 95A.0252/96, Issue 7, dated December 2005;
Issue 08, dated March 2006; or Issue 09, dated November 2006.
Page 42028
572050-01-7 or alternative task
Model A320-100........... At the time of the next Within 6 months after 572050-02-7.
due accomplishment of
the effective date of any one of the tasks
this AD. 572004, 572020, or 572053 as currently described in the Airbus
A318/A319/A320/A321
Airworthiness
Limitation Items,
Document AI/SE-M4/ 95A.0252/96, Issue 7, dated December 2005;
Issue 08, dated March 2006; or Issue 09, dated November 2006. 534132-01-1...................... Model A320 PRE 30748..... The threshold/interval
Within 100 days after as defined in Airbus
the effective date of
A318/A319/A320/A321
this AD, without
Airworthiness
exceeding the previous
Limitation Items,
threshold/interval as
Document AI/SE-M4/
defined in Airbus A318/ 95A.0252/96, Issue 10,
A319/A320/A321 dated October 2009; or
Airworthiness
Issue 11, dated
Limitation Items,
September 2010.
Document AI/SE-M4/ 95A.0252/96, Issue 7, dated December 2005;
Issue 08, dated March 2006; or Issue 09, dated November 2006. 531118-01-1...................... Model A318 (except (A318- The threshold/interval
Within 100 days after 121 and -122), Group 19- as defined in Airbus
the effective date of 1A, Group 19-1B, Model
A318/A319/A320/A321
this AD, without
A320, A321.
Airworthiness
exceeding the previous
Limitation Items,
threshold/interval as
Document AI/SE-M4/
defined in Airbus A318/ 95A.0252/96, Issue 10,
A319/A320/A321 dated October 2009; or
Airworthiness
Issue 11, dated
Limitation Items,
September 2010.
Document AI/SE-M4/ 95A.0252/96, Issue 7, dated December 2005;
Issue 08, dated March 2006; or Issue 09, dated November 2006. 531118-01-1...................... Model A318-121 and -122
The threshold/interval
Within 100 days after airplanes.
as defined in Airbus
the effective date of
A318/A319/A320/A321
this AD.
Airworthiness
Limitation Items,
Document AI/SE-M4/ 95A.0252/96, Issue 10, dated October 2009; or
Issue 11, dated
September 2010.
Note 2: New ALI Task 572050 refers to the outer wing dry bay and is comprised of extracts from three ALI Tasks: 572004, 572020 and 572053. The threshold of ALI Task 572050 for the whole dry bay area is that of the lowest threshold of the source ALI tasks, i.e., that of ALI Task 572053.
No Alternative Life Limits, Inspections, or Inspection Intervals
(l) After the actions specified in paragraphs (g) and (h) of this AD have been accomplished, no alternative life limits, inspections, or inspection intervals may be used, except as provided by paragraphs (i) and (m) of this AD, and except as required by paragraph (j) of this AD.
(m) After the actions specified in paragraph (j) of this AD have been accomplished, no alternative life limits, inspections, or inspection intervals may be used.
FAA AD Differences
Note 3: This AD differs from the MCAI and/or service information as follows: European Aviation Safety Agency (EASA) AD 2010-0071R1, dated May 28, 2010, requires operators to comply with the limitations specified in Airbus A318/A319/A320/A321 Airworthiness
Limitation Items, Document AI/SE-M4/95A.0252/96, Issue 10, dated
October 2009; or Airbus A319 Corporate Jet Airworthiness Limitation
Items, Document AI/SE-M2/95A.1038/99, Issue 02, dated March 2009; as applicable. This AD requires incorporating Airbus A318/A319/A320/
A321 Airworthiness Limitation Items, Document AI/SE-M4/95A.0252/96,
Issue 10, dated October 2009; or Issue 11, dated September 2010.
Additionally, this AD does not require incorporating Airbus A319
Corporate Jet Airworthiness Limitation Items, Document AI/SE-M2/ 95A.1038/99, Issue 02, dated March 2009, because that ALI only specifies compliance with the limitations specified in Airbus A318/
A319/A320/A321 Airworthiness Limitation Items, Document AI/SE-M4/ 95A.0252/96, Issue 10, dated October 2009; or Issue 11, dated
September 2010.
Other FAA AD Provisions
(n) The following provisions also apply to this AD:
(1) Alternative Methods of Compliance (AMOCs): The Manager,
International Branch, ANM-116, Transport Airplane Directorate, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight
Standards District Office, as appropriate. If sending information directly to the International Branch, send it to Attn: Tim Dulin,
Aerospace Engineer, International Branch, ANM-116, Transport
Airplane Directorate, FAA, 1601 Lind Avenue, SW., Renton, Washington 98057-3356; telephone (425) 227-2141; fax (425) 227-1149.
Information may be e-mailed to: 9-ANM-116-AMOC-REQUESTS@faa.gov.
Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office. The AMOC approval letter must specifically reference this
AD.
(2) Airworthy Product: For any requirement in this AD to obtain corrective actions from a manufacturer or other source, use these actions if they are FAA-approved. Corrective actions are considered
FAA-approved if they are approved by the State of Design Authority
(or their delegated agent). You are required to assure the product is airworthy before it is returned to service.
Related Information
(o) Refer to MCAI EASA Airworthiness Directive 2010-0071R1, dated May 28, 2010; Airbus A318/A319/A320/A321 Airworthiness
Limitation Items, Document AI/SE-M4/95A.0252/96, Issue 7, dated
December 2005; Airbus A318/A319/A320/A321 Airworthiness Limitation
Items, Document AI/SE-M4/95A.0252/96, Issue 08, dated March 2006;
Airbus A318/A319/A320/A321 Airworthiness Limitation Items, Document
AI/SE-M4/95A.0252/96, Issue 09, dated November 2006; Airbus A318/
A319/A320/A321 Airworthiness Limitation Items, Document AI/SE-M4/ 95A.0252/96, Issue 10, dated October 2009; and Airbus A318/A319/
A320/A321 Airworthiness Limitation Items, Document AI/SE-M4/ 95A.0252/96, Issue 11, dated September 2010; for related information.
Material Incorporated by Reference
(p) You must use the service information contained in Table 2 of this AD to do the
Page 42029
actions required by this AD, unless the AD specifies otherwise.
Table 2--All Material Incorporated by Reference
Document
Revision
Date
Airbus A318/A319/A320/A321 ALS Part 1--Safe Revision 00................ February 28, 2006.
Life Airworthiness Limitation Items.
Airbus A318/A319/A320/A321 Airworthiness
Issue 7.................... December 2005.
Limitation Items, Document AI/SE-M4/ 95A.0252/96.
Airbus A318/A319/A320/A321 Airworthiness
Issue 08................... March 2006.
Limitation Items, Document AI/SE-M4/ 95A.0252/96.
Airbus A318/A319/A320/A321 Airworthiness
Issue 09................... November 2006.
Limitation Items, Document AI/SE-M4/ 95A.0252/96.
Airbus A318/A319/A320/A321 Airworthiness
Issue 10................... October 2009.
Limitation Items, Document AI/SE-M4/ 95A.0252/96.
Airbus A318/A319/A320/A321 Airworthiness
Issue 11................... September 2010.
Limitation Items, Document AI/SE-M4/ 95A.0252/96.
The issue level of Airbus A318/A319/A320/A321 Airworthiness
Limitation Items, Document AI/SE-M4/95A.0252/96, Issue 10, dated
October 2009; and Issue 11, dated September 2010; is indicated only on the title page and in the Record of Revisions of these documents.
(1) The Director of the Federal Register approved the incorporation by reference of Airbus A318/A319/A320/A321
Airworthiness Limitation Items, Document AI/SE-M4/95A.0252/96, Issue 10, dated October 2009; and Airbus A318/A319/A320/A321 Airworthiness
Limitation Items, Document AI/SE-M4/95A.0252/96, Issue 11, dated
September 2010; under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) The Director of the Federal Register previously approved the incorporation by reference of the service information contained in table 3 of this AD on November 7, 2007 (72 FR 56262, October 3, 2007).
Table 3--Material Previously Incorporated by Reference
Document
Revision
Date
Airbus A318/A319/A320/A321 ALS Part 1--Safe Revision 00................ February 28, 2006.
Life Airworthiness Limitation Items.
Airbus A318/A319/A320/A321 Airworthiness
Issue 7.................... December 2005.
Limitation Items, Document AI/SE-M4/ 95A.0252/96.
Airbus A318/A319/A320/A321 Airworthiness
Issue 08................... March 2006.
Limitation Items, Document AI/SE-M4/ 95A.0252/96.
Airbus A318/A319/A320/A321 Airworthiness
Issue 09................... November 2006.
Limitation Items, Document AI/SE-M4/ 95A.0252/96.
(3) For service information identified in this AD, contact
Airbus, Airworthiness Office--EAS, 1 Rond Point Maurice Bellonte, 31707 Blagnac Cedex, France; telephone +33 5 61 93 36 96; fax +33 5 61 93 44 51; e-mail account.airworth-eas@airbus.com; Internet http://www.airbus.com.
(4) You may review copies of the service information at the FAA,
Transport Airplane Directorate, 1601 Lind Avenue, SW., Renton,
Washington. For information on the availability of this material at the FAA, call 425-227-1221.
(5) You may also review copies of the service information that is incorporated by reference at the National Archives and Records
Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
Issued in Renton, Washington, on June 24, 2011.
Ali Bahrami,
Manager, Transport Airplane Directorate, Aircraft Certification
Service.
FR Doc. 2011-16559 Filed 7-15-11; 8:45 am
BILLING CODE 4910-13-P
