Airworthiness directives: Pilatus Aircraft Ltd.,

[Federal Register: January 10, 2002 (Volume 67, Number 7)]

[Rules and Regulations]

[Page 1286-1287]

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

[DOCID:fr10ja02-4]

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. 2001-CE-30-AD; Amendment 39-12579; AD 2001-26-13]

RIN 2120-AA64

Airworthiness Directives; Pilatus Aircraft Ltd. Model PC-7 Airplanes

AGENCY: Federal Aviation Administration, DOT.

ACTION: Final rule.

SUMMARY: This amendment adopts a new airworthiness directive (AD) that applies to certain Pilatus Aircraft Ltd. (Pilatus) Model PC-7 airplanes. This AD requires you to inspect the landing-gear emergency- extension cable for damage and replace if necessary; verify the correct installation of the bowden-cable conduit clamp and correct if necessary; and modify the temperature-control lever mechanism. This AD is the result of mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Switzerland. The actions specified by this AD are intended to prevent the malfunction of the emergency landing-gear extension system. Insufficient clearance between the temperature-control lever mechanism and the landing-gear emergency- extension cable could result in damage to the emergency landing gear extension cable, or the cable could get caught on the temperature control lever. Damage to, or interference with, the landing-gear emergency-extension cable could lead to a malfunction of the emergency landing-gear extension system.

DATES: This AD becomes effective on February 12, 2002.

The Director of the Federal Register approved the incorporation by reference of certain publications listed in the regulations as of February 12, 2002.

ADDRESSES: You may get the service information referenced in this AD from Pilatus Aircraft Ltd., Customer Liaison Manager, CH-6371 Stans, Switzerland; telephone: +41 41 619 6509; facsimile: +41 41 610 3351. You may view this information at the Federal Aviation Administration (FAA), Central Region, Office of the Regional Counsel, Attention: Rules Docket No. 2001-CE-30-AD, 901 Locust, Room 506, Kansas City, Missouri 64106; or at the Office of the Federal Register, 800 North Capitol Street, NW, suite 700, Washington, DC.

FOR FURTHER INFORMATION CONTACT: Doug Rudolph, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4059; facsimile: (816) 329-4090.

SUPPLEMENTARY INFORMATION:

Discussion

What Events Have Caused This AD?

The Federal Office for Civil Aviation (FOCA), which is the airworthiness authority for Switzerland, recently notified FAA that an unsafe condition may exist on certain Pilatus Model PC-7 airplanes. The FOCA reports one occurrence of restricted movement of the temperature control lever. Investigation of the problem revealed that the landing- gear emergency-extension cable was caught on the temperature-control lever mechanism. Insufficient clearance between the landing-gear emergency-extension cable and the temperature-control lever caused the interference. This interference could also cause damage to the landing- gear emergency-extension cable.

What Is the Potential Impact if FAA Took No Action?

If not detected and corrected, damage to or interference with the landing-gear emergency-extension cable could lead to a malfunction of the emergency landing-gear extension system.

Has FAA Taken Any Action to This Point?

We issued a proposal to amend part 39 of the Federal Aviation Regulations (14 CFR part 39) to include an AD that would apply to certain Pilatus Model PC-7 airplanes. This proposal was published in the Federal Register as a notice of proposed rulemaking (NPRM) on October 10, 2001 (66 FR 51611). The NPRM proposed to require you to inspect the landing-gear emergency-extension cable for damage; replace any damaged landing-gear emergency-extension cable; verify the correct installation of the bowden-cable conduit clamp; correct improper installation of the clamp; and install a new bolt and a new nut on the temperature-control lever mechanism.

Was the Public Invited To Comment?

The FAA encouraged interested persons to participate in the making of this amendment. We did not receive any comments on the proposed rule or on our determination of the cost to the public.

FAA's Determination

What Is FAA's Final Determination on This Issue?

After careful review of all available information related to the subject presented above, we have determined that air safety and the public interest require the adoption of the rule as proposed except for minor editorial corrections. We have determined that these minor corrections:

--Provide the intent that was proposed in the NPRM for correcting the unsafe condition; and --Do not add any additional burden upon the public than was already proposed in the NPRM.

Cost Impact

How Many Airplanes Does This AD Impact

We estimate that this AD affects 13 airplanes in the U.S. registry.

What Is the Cost Impact of This AD on Owners/Operators of the Affected Airplanes?

The manufacturer has agreed to pay the costs for the inspection, replacement parts, and installation workhours.

The only impact this AD will have on the owners/operators of the affected airplanes is the time it will take to have the actions of this AD incorporated.

Compliance Time of This AD

What Will Be the Compliance Time of This AD?

The compliance time of this AD is ``within the next 12 calendar months after the effective date of this AD.''

Why Is the Compliance Time Presented in Calendar Time Instead of Hours Time-in-Service (TIS)?

Although malfunction of the emergency landing gear extension system is unsafe during flight, the condition is not a direct result of airplane operation. The chance of this situation occurring is the same for an airplane with 10 hours TIS as it would be for an airplane with 500 hours TIS.

[[Page 1287]]

A calendar time for compliance will ensure that the unsafe condition is addressed on all airplanes in a reasonable time period.

Regulatory Impact

Does This AD Impact Various Entities?

The regulations adopted herein will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government. Therefore, it is determined that this final rule does not have federalism implications under Executive Order 13132.

Does This AD Involve a Significant Rule or Regulatory Action?

For the reasons discussed above, I certify that this action (1) is not a ``significant regulatory action'' under Executive Order 12866; (2) is not a ``significant rule'' under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); and (3) will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. A copy of the final evaluation prepared for this action is contained in the Rules Docket. A copy of it may be obtained by contacting the Rules Docket at the location provided under the caption ADDRESSES.

List of Subjects in 14 CFR Part 39

Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.

Adoption of the Amendment

Accordingly, under the authority delegated to me by the Administrator, the Federal Aviation Administration amends part 39 of the Federal Aviation Regulations (14 CFR part 39) as follows:

PART 39--AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

   Authority: 49 U.S.C. 106(g), 40113, 44701.

   Sec. 39.13 [Amended]

2. FAA amends Sec. 39.13 by adding a new AD to read as follows:

   2001-26-13 Pilatus Aircraft Ltd.: Amendment 39-12579; Docket No. 2001-CE-30-AD.

   (a) What airplanes are affected by this AD? This AD affects Model PC-7 airplanes, Manufacturer Serial Number (MSN) 001 through MSN 616, that are certificated in any category.

   (b) Who must comply with this AD? Anyone who wishes to operate any of the above airplanes must comply with this AD.

   (c) What problem does this AD address? The actions specified by this AD are intended to prevent the malfunction of the emergency landing-gear extension system. Insufficient clearance between the temperature-control lever mechanism and the landing-gear emergency- extension cable could result in damage to the emergency landing gear extension cable, or the cable could get caught on the temperature control lever. Damage to, or interference with, the landing-gear emergency-extension cable could lead to a malfunction of the emergency landing-gear extension system.

   (d) What actions must I accomplish to address this problem? To address this problem, you must accomplish the following:

   Actions

   Compliance

   Procedures

   (1) Inspect the landing-gear Inspect within the In accordance with emergency-extension cable for next 12 calendar Pilatus PC-7 damage and replace any damaged months after

   Service Bulletin cable found.

   February 12, 2002 No. 32-020, dated (the effective July 5, 2001. date of this AD). Replace prior to further flight.

   (2) Verify the correct

   Prior to further In accordance with installation of the bowden- flight after the Pilatus PC-7 cable conduit clamp, correct if inspection

   Service Bulletin necessary, and install a new required in

   No. 32-020, dated bolt and a new nut in the

   paragraph (d)(1) July 5, 2001. temperature-control lever

   of this AD. mechanism.

   (3) Do not install any

   As of February 12, Not applicable. temperature-control lever

   2002 (the mechanism (or FAA-approved

   effective date of equivalent part number), unless this AD). it has been modified as required in paragraph (d)(2) of this AD.

   (e) Can I comply with this AD in any other way? You may use an alternative method of compliance or adjust the compliance time if:

   (1) Your alternative method of compliance provides an equivalent level of safety; and

   (2) The Manager, Small Airplane Directorate, approves your alternative. Submit your request through an FAA Principal Maintenance Inspector, who may add comments and then send it to the Manager, Small Airplane Directorate.

   Note 1: This AD applies to each airplane identified in paragraph (a) of this AD, regardless of whether it has been modified, altered, or repaired in the area subject to the requirements of this AD. For airplanes that have been modified, altered, or repaired so that the performance of the requirements of this AD is affected, the owner/ operator must request approval for an alternative method of compliance in accordance with paragraph (e) of this AD. The request should include an assessment of the effect of the modification, alteration, or repair on the unsafe condition addressed by this AD; and, if you have not eliminated the unsafe condition, specific actions you propose to address it.

   (f) Where can I get information about any already-approved alternative methods of compliance? Contact Doug Rudolph, Aerospace Engineer, FAA, Small Airplane Directorate, 901 Locust, Room 301, Kansas City, Missouri 64106; telephone: (816) 329-4059; facsimile: (816) 329-4090.

   (g) What if I need to fly the airplane to another location to comply with this AD? The FAA can issue a special flight permit under sections 21.197 and 21.199 of the Federal Aviation Regulations (14 CFR 21.197 and 21.199) to operate your airplane to a location where you can accomplish the requirements of this AD.

   (h) Are any service bulletins incorporated into this AD by reference? Actions required by this AD must be done in accordance with Pilatus PC-7 Service Bulletin No. 32-020, dated July 5, 2001. The Director of the Federal Register approved this incorporation by reference under 5 U.S.C. 552(a) and 1 CFR part 51. You can get copies from Pilatus Aircraft Ltd., Customer Liaison Manager, CH-6371 Stans, Switzerland. You can look at copies at the FAA, Central Region, Office of the Regional Counsel, 901 Locust, Room 506, Kansas City, Missouri, or at the Office of the Federal Register, 800 North Capitol Street, NW, suite 700, Washington, DC.

   Note 2: The subject of this AD is addressed in Swiss AD HB 2001- 483, dated August 20, 2001.

   (i) When does this amendment become effective? This amendment becomes effective on February 12, 2002.

   Issued in Kansas City, Missouri, on December 21, 2001. Michael K. Dahl, Acting Manager, Small Airplane Directorate, Aircraft Certification Service.

   [FR Doc. 02-149Filed1-9-02; 8:45 am]

   BILLING CODE 4910-13-U