Airworthiness directives: Sikorsky; correction,
[Federal Register: August 25, 1998 (Volume 63, Number 164)]
[Rules and Regulations]
[Page 45170]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr25au98-2]
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 97-SW-18-AD; Amendment 39-10126; AD 97-19-06]
RIN 2120-AA64
Airworthiness Directives; Sikorsky Aircraft Corporation Model S- 61A, D, E, L, N, NM, R, and V Helicopters; Correction
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule; correction.
SUMMARY: This document corrects the amendment number in airworthiness directive (AD) 97-19-06 that was incorrectly published in the Federal Register on September 19, 1997 (62 FR 49132). This AD is applicable to Sikorsky Aircraft Corporation Model S-61A, D, E, L, N, NM, R, and V helicopters and requires, before further flight, inspecting certain main rotor blades to determine the anodizing date for certain pocket assemblies installed on the blade, and if a blade has a pocket assembly that was anodized by Poly-Metal Company during the period of October 1, 1996, through December 31, 1996, replacing it with an airworthy blade.
DATES: Effective October 6, 1997.
The incorporation by reference of certain publications listed in the regulations was previously approved by the Director of the Federal Register as of October 6, 1997 (62 FR 49132, September 19, 1997).
FOR FURTHER INFORMATION CONTACT: Mr. Shep Blackman, Aerospace Engineer, FAA, Rotorcraft Directorate, Rotorcraft Standards Staff, 2601 Meacham Blvd., Fort Worth, Texas 76137, telephone (817) 222-5296, fax (817) 222-5961.
SUPPLEMENTARY INFORMATION: Airworthiness Directive (AD) 97-19-06, amendment 39-10126, applicable to Sikorsky Aircraft Corporation Model S-61A, D, E, L, N, NM, R, and V helicopters was published in the Federal Register on September 19, 1997 (62 FR 49132). That AD requires, before further flight, inspecting certain main rotor blades to determine the anodizing date for certain pocket assemblies installed on the blade, and if a blade has a pocket assembly that was anodized by Poly-Metal Company during the period of October 1, 1996, through December 31, 1996, replacing it with an airworthy blade.
As published, the amendment number given throughout the AD is incorrect.
Since no other part of the regulatory information has been changed, the final rule is not being republished.
The effective date of the AD remains October 6, 1997.
In rule FR Doc. 97-24075 published on September 19, 1997 (62 FR 49132), make the following corrections:
Sec. 39.13 [Corrected]
(1) On page 49132, in the first column, correct ``Amendment 39- 10026'' to read ``Amendment 39-10126.''
(2) On page 49133, in the first column, paragraph 2., correct the two recitations of ``Amendment 39-10026'' to read ``Amendment 39- 10126''.
Issued in Fort Worth, Texas, on August 18, 1998. Henry A. Armstrong, Manager, Rotorcraft Directorate, Aircraft Certification Service.
[FR Doc. 98-22699Filed8-24-98; 8:45 am]
BILLING CODE 4910-13-P
