Certain Lined Paper Products From India: Initiation of Changed Circumstances Review
Federal Register, Volume 79 Issue 14 (Wednesday, January 22, 2014)
Federal Register Volume 79, Number 14 (Wednesday, January 22, 2014)
Notices
Pages 3567-3569
From the Federal Register Online via the Government Printing Office www.gpo.gov
FR Doc No: 2014-01163
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration
A-533-843
Certain Lined Paper Products From India: Initiation of Changed Circumstances Review
AGENCY: Enforcement and Compliance, formerly Import Administration, International Trade Administration, Department of Commerce.
SUMMARY: The Department of Commerce (the Department) has received information sufficient to warrant initiation of a changed circumstances review of the antidumping duty order on certain lined paper products (CLPP) from India. Specifically, based upon a request filed by Navneet Education Limited (Navneet Education), a producer/exporter to the United States of subject merchandise, the Department is initiating a changed circumstances review to determine whether Navneet Education is the successor-in-interest of Navneet Publications (India) Ltd. (Navneet Publications), a mandatory respondent in several prior administrative reviews of the CLPP Order.\1\
---------------------------------------------------------------------------
\1\ See Notice of Amended Final Determination of Sales at Less Than Fair Value: Certain Lined Paper Products from the People's Republic of China; Notice of Antidumping Duty Orders: Certain Lined Paper Products from India, Indonesia and the People's Republic of China; and Notice of Countervailing Duty Orders: Certain Lined Paper Products from India and Indonesia, 71 FR 56949 (September 28, 2006) (CLPP Order).
---------------------------------------------------------------------------
DATES: Effective January 22, 2014.
FOR FURTHER INFORMATION CONTACT: Cindy Robinson or Eric B. Greynolds, AD/CVD Operations, Office III, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230; telephone: (202) 482-3797 and (202) 482-6071, respectively.
SUPPLEMENTARY INFORMATION:
Background
On September 28, 2006, the Department published an antidumping duty order on CLPP from India.\2\ On October 17, 2013,\3\ Navneet Education informed the Department that effective September 30, 2013, the former company ``Navneet Publications'' \4\ changed its name to Navneet Education in accordance with the company's existing board of directors' resolution and Indian law. Navneet Education stated that the name change process began in August 2013 and was finalized by the end of September 2013. Navneet Education submitted a copy of ``Fresh Certificate of Incorporation Consequent upon Change of Name'' approved by ``Government of India--Ministry of Corporate Affairs, Registrar of Companies, Maharashtra, Mumbai,'' dated October 17, 2013.\5\
---------------------------------------------------------------------------
\2\ See CLPP Order.
\3\ See Certain Lined Paper Products from India: Request for Changed Circumstances Reviews of Navneet Publications (India) Ltd. (October 17, 2013) (CCR Request) at 8.
\4\ CCR Request at 2 indicated that Navneet Publications has participated as a respondent in the original antidumping duty investigation, and it has been a respondent in several antidumping duty administrative reviews, most often as a named mandatory respondent (e.g., in the second through fourth reviews it received the following company-specific margins of 1.34 percent, 0.43 percent, and 2.7 percent, respectively. In the fifth review, Navneet Publications received a non-selected rate of 11.01 percent. In the ongoing sixth review, it is again selected as a mandatory respondent).
\5\ See CCR Request at Attachment 1.
---------------------------------------------------------------------------
Navneet Education explained that the purpose of its name change is to reflect the broader educational scope of the company's business in recent years, beyond the traditional and narrower paper publication line of business implied by the former name. Specifically, Navneet Education indicated that its company's ``modern development and direction of its business has established the company as a leading supplier of educational publications, a strong brand in the field of educational and children's publications and scholastic stationary
Page 3568
products, and a major innovator and provider of digital learning services.'' \6\
---------------------------------------------------------------------------
\6\ Id., at 4.
---------------------------------------------------------------------------
The company now known as Navneet Education requests that: (1) The Department conduct a changed circumstances review pursuant to section 751(b)(1) of the Tariff Act of 1930, as amended (the Act) and 19 CFR 351.216 to determine that it is the successor-in-interest to Navneet Publications for purposes of the antidumping order; and (2) the Department issue instructions to Customs and Border Protection (CBP) that reflect this conclusion.\7\ We received no comments from any other interested party.
---------------------------------------------------------------------------
\7\ Id., at 1-2.
---------------------------------------------------------------------------
Scope of the Order
The scope of this order includes certain lined paper products, typically school supplies (for purposes of this scope definition, the actual use of or labeling these products as school supplies or non-
school supplies is not a defining characteristic) composed of or including paper that incorporates straight horizontal and/or vertical lines on ten or more paper sheets (there shall be no minimum page requirement for looseleaf filler paper) including but not limited to such products as single- and multi-subject notebooks, composition books, wireless notebooks, looseleaf or glued filler paper, graph paper, and laboratory notebooks, and with the smaller dimension of the paper measuring 6 inches to 15 inches (inclusive) and the larger dimension of the paper measuring 8-3/4 inches to 15 inches (inclusive). Page dimensions are measured size (not advertised, stated, or ``tear-
out'' size), and are measured as they appear in the product (i.e., stitched and folded pages in a notebook are measured by the size of the page as it appears in the notebook page, not the size of the unfolded paper). However, for measurement purposes, pages with tapered or rounded edges shall be measured at their longest and widest points. Subject lined paper products may be loose, packaged or bound using any binding method (other than case bound through the inclusion of binders board, a spine strip, and cover wrap). Subject merchandise may or may not contain any combination of a front cover, a rear cover, and/or backing of any composition, regardless of the inclusion of images or graphics on the cover, backing, or paper. Subject merchandise is within the scope of this order whether or not the lined paper and/or cover are hole punched, drilled, perforated, and/or reinforced. Subject merchandise may contain accessory or informational items including but not limited to pockets, tabs, dividers, closure devices, index cards, stencils, protractors, writing implements, reference materials such as mathematical tables, or printed items such as sticker sheets or miniature calendars, if such items are physically incorporated, included with, or attached to the product, cover and/or backing thereto.
Specifically excluded from the scope of this order are:
Unlined copy machine paper;
writing pads with a backing (including but not limited to products commonly known as ``tablets,'' ``note pads,'' ``legal pads,'' and ``quadrille pads''), provided that they do not have a front cover (whether permanent or removable). This exclusion does not apply to such writing pads if they consist of hole-punched or drilled filler paper;
three-ring or multiple-ring binders, or notebook organizers incorporating such a ring binder provided that they do not include subject paper;
index cards;
printed books and other books that are case bound through the inclusion of binders board, a spine strip, and cover wrap;
newspapers;
pictures and photographs;
desk and wall calendars and organizers (including but not limited to such products generally known as ``office planners,'' ``time books,'' and ``appointment books'');
telephone logs;
address books;
columnar pads & tablets, with or without covers, primarily suited for the recording of written numerical business data;
lined business or office forms, including but not limited to: pre-printed business forms, lined invoice pads and paper, mailing and address labels, manifests, and shipping log books;
lined continuous computer paper;
boxed or packaged writing stationary (including but not limited to products commonly known as ``fine business paper,'' ``parchment paper'', and ``letterhead''), whether or not containing a lined header or decorative lines;
Stenographic pads (``steno pads''), Gregg ruled (``Gregg ruling'' consists of a single- or double-margin vertical ruling line down the center of the page. For a six-inch by nine-inch stenographic pad, the ruling would be located approximately three inches from the left of the book.), measuring 6 inches by 9 inches.
Also excluded from the scope of this order are the following trademarked products:
FlyTM lined paper products: A notebook, notebook organizer, loose or glued note paper, with papers that are printed with infrared reflective inks and readable only by a FlyTM pen-top computer. The product must bear the valid trademark FlyTM (products found to be bearing an invalidly licensed or used trademark are not excluded from the scope).
ZwipesTM: A notebook or notebook organizer made with a blended polyolefin writing surface as the cover and pocket surfaces of the notebook, suitable for writing using a specially-
developed permanent marker and erase system (known as a ZwipesTM pen). This system allows the marker portion to mark the writing surface with a permanent ink. The eraser portion of the marker dispenses a solvent capable of solubilizing the permanent ink allowing the ink to be removed. The product must bear the valid trademark ZwipesTM (products found to be bearing an invalidly licensed or used trademark are not excluded from the scope).
FiveStarsupregAdvanceTM: A notebook or notebook organizer bound by a continuous spiral, or helical, wire and with plastic front and rear covers made of a blended polyolefin plastic material joined by 300 denier polyester, coated on the backside with PVC (poly vinyl chloride) coating, and extending the entire length of the spiral or helical wire. The polyolefin plastic covers are of specific thickness; front cover is 0.019 inches (within normal manufacturing tolerances) and rear cover is 0.028 inches (within normal manufacturing tolerances). Integral with the stitching that attaches the polyester spine covering, is captured both ends of a 1 wide elastic fabric band. This band is located 2\3/8\ from the top of the front plastic cover and provides pen or pencil storage. Both ends of the spiral wire are cut and then bent backwards to overlap with the previous coil but specifically outside the coil diameter but inside the polyester covering. During construction, the polyester covering is sewn to the front and rear covers face to face (outside to outside) so that when the book is closed, the stitching is concealed from the outside. Both free ends (the ends not sewn to the cover and back) are stitched with a turned edge construction. The flexible polyester material forms a covering over the spiral wire to protect it and provide a comfortable grip on the product. The product must bear the valid trademarks FiveStarsupregAdvanceTM (products found to
Page 3569
be bearing an invalidly licensed or used trademark are not excluded from the scope).
FiveStar FlexTM: A notebook, a notebook organizer, or binder with plastic polyolefin front and rear covers joined by 300 denier polyester spine cover extending the entire length of the spine and bound by a 3-ring plastic fixture. The polyolefin plastic covers are of a specific thickness; front cover is 0.019 inches (within normal manufacturing tolerances) and rear cover is 0.028 inches (within normal manufacturing tolerances). During construction, the polyester covering is sewn to the front cover face to face (outside to outside) so that when the book is closed, the stitching is concealed from the outside. During construction, the polyester cover is sewn to the back cover with the outside of the polyester spine cover to the inside back cover. Both free ends (the ends not sewn to the cover and back) are stitched with a turned edge construction. Each ring within the fixture is comprised of a flexible strap portion that snaps into a stationary post which forms a closed binding ring. The ring fixture is riveted with six metal rivets and sewn to the back plastic cover and is specifically positioned on the outside back cover. The product must bear the valid trademark FiveStar FlexTM (products found to be bearing an invalidly licensed or used trademark are not excluded from the scope).
Merchandise subject to this order is typically imported under headings 4811.90.9035, 4811.90.9080, 4820.30.0040, 4810.22.5044, 4811.90.9050, 4811.90.9090, 4820.10.2010, 4820.10.2020, 4820.10.2030, 4820.10.2040, 4820.10.2050, 4820.10.2060, and 4820.10.4000 of the Harmonized Tariff Schedule of the United States (HTSUS). The HTSUS headings are provided for convenience and customs purposes; however, the written description of the scope of this order is dispositive.
Initiation of Changed Circumstances Review
Pursuant to section 751(b)(1) of the Act, the Department will conduct a changed circumstances review upon receipt of information concerning, or a request from, an interested party for a review of an antidumping duty order which shows changed circumstances sufficient to warrant a review of the order. In the event that the Department determines that expedited action is warranted, 19 CFR 351.221(c)(3)(ii) permits the Department to combine the notices of initiation and preliminary results.
In accordance with 19 CFR 351.216(d), the Department has determined that the information submitted by Navneet Education constitutes sufficient evidence to conduct a changed circumstances review. In an antidumping duty changed circumstances review involving a successor-in-
interest determination, the Department typically examines several factors including, but not limited to, changes in: (1) Management; (2) production facilities; (3) supplier relationships; and (4) customer base.\8\ While no single factor or combination of factors will necessarily be dispositive, the Department generally will consider the new company to be the successor to the predecessor if the resulting operations are essentially the same as those of the predecessor company.\9\ Thus, if the record demonstrates that, with respect to the production and sale of the subject merchandise, the new company operates as the same business entity as the predecessor company, the Department may assign the new company the cash deposit rate of its predecessor.\10\
---------------------------------------------------------------------------
\8\ See, e.g., Certain Activated Carbon From the People's Republic of China: Notice of Initiation of Changed Circumstances Review, 74 FR 19934, 19935 (April 30, 2009).
\9\ See, e.g., Notice of Initiation of Antidumping Duty Changed Circumstances Review: Certain Forged Stainless Steel Flanges from India, 71 FR 327 (January 4, 2006).
\10\ See, e.g., Fresh and Chilled Atlantic Salmon From Norway; Final Results of Changed Circumstances Antidumping Duty Administrative Review, 64 FR 9979, 9980 (March 1, 1999).
---------------------------------------------------------------------------
Based on the information provided in its submission, Navneet Education has provided sufficient evidence to warrant a review to determine if it is the successor-in-interest to Navneet Publication. Therefore, pursuant to section 751(b)(1) of the Act and 19 CFR 351.216(d), we are initiating a changed circumstances review. However, the Department finds it is necessary to issue a questionnaire requesting additional information for the review as provided for by 19 CFR 351.221(b)(2). For that reason, the Department is not conducting this review on an expedited basis by publishing preliminary results in conjunction with this notice of initiation. The Department will publish in the Federal Register a notice of the preliminary results of the antidumping duty changed circumstances review, in accordance with 19 CFR 351.221(b)(4), and 19 CFR 351.221(c)(3)(i). That notice will set forth the factual and legal conclusions upon which our preliminary results are based and a description of any action proposed.
Pursuant to 19 CFR 351.221(b)(4)(ii), interested parties will have an opportunity to comment on the preliminary results of review. In accordance with 19 CFR 351.216(e), the Department will issue the final results of its antidumping duty changed circumstances review not later than 270 days after the date on which the review is initiated, or not later than 45 days if all parties to the proceeding agree to the outcome of the review.
This notice is published in accordance with sections 751(b)(l) and 777(i)(l) of the Act and 19 CFR 351.216(b) and 351.221(b)(1).
Dated: January 14, 2014.
Christian Marsh,
Deputy Assistant Secretary, for Antidumping and Countervailing Duty Operations.
FR Doc. 2014-01163 Filed 1-21-14; 8:45 am
BILLING CODE 3510-DS-P
