Special Conditions: Cessna Aircraft Co., Model 525C; High Fuel Temperature
Federal Register: December 23, 2009 (Volume 74, Number 245)
Rules and Regulations
Page 68131-68132
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
DOCID:fr23de09-1
Rules and Regulations
Federal Register
This section of the FEDERAL REGISTER contains regulatory documents having general applicability and legal effect, most of which are keyed to and codified in the Code of Federal Regulations, which is published under 50 titles pursuant to 44 U.S.C. 1510.
The Code of Federal Regulations is sold by the Superintendent of Documents.
Prices of new books are listed in the first FEDERAL REGISTER issue of each week.
Page 68131
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration 14 CFR Part 23
Docket No. CE299; Special Conditions No. 23-239-SC
Special Conditions: Cessna Aircraft Company, Model 525C; High
Fuel Temperature
AGENCY: Federal Aviation Administration (FAA), DOT.
ACTION: Final special conditions.
SUMMARY: These special conditions are issued for the Cessna Aircraft
Company, model 525C airplane. This airplane will have a novel or unusual design feature(s) associated with high fuel temperature. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the
Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
DATES: Effective Date: December 16, 2009.
FOR FURTHER INFORMATION CONTACT: Peter L. Rouse, Federal Aviation
Administration, Aircraft Certification Service, Small Airplane
Directorate, ACE-111, 901 Locust, Kansas City, Missouri, 816-329-4135, fax 816-329 4090.
SUPPLEMENTARY INFORMATION:
Background
On August 9, 2006, Cessna Aircraft Company applied for an amendment to Type Certificate Number A1WI to include the new model 525C (CJ4).
The model 525C (CJ4), which is a derivative of the model 525B (CJ3), currently approved under Type Certificate Number A1WI, is a commuter category, low-winged monoplane with ``T'' tailed vertical and horizontal stabilizers, retractable tricycle type landing gear and twin turbofan engines mounted on the aircraft fuselage. The maximum takeoff weight is 16,950 pounds, the VMO/MMOis 305 KIAS/
M 0.77 and the maximum altitude is 45,000 feet.
The Cessna model 525C (CJ4) fuel tank system is similar to other
Cessna model 525 designs which use the Williams FJ44 series of engine.
The fuel tank system is configured to reject engine heat through the airplane fuel tank system by using an engine oil/fuel heat exchanger.
Certified as part of the engine, the engine oil/fuel heat exchanger cools the oil and heats the fuel. Over time, the engine manufacturers have optimized the design, size, placement, and space management of the oil/fuel heat exchanger such that today's engines now reject more heat back into the airplane fuel tank system than has existed in the past.
As can be seen by the chart below, we are now exposing the fuel tank system and airplane to temperatures above the critical temperature test requirements of Sec. Sec. 23.961 and 23.965(d), which has been the universal FAA standard for fuel system hot weather operations and fuel tank test and evaluation since 1950.
IM Max. fuel pump
Motive Fuel tank Fuel pump inlet
Aircraft model
Engine model
flow
([deg]F) inlet
temp.
([deg]F)
([deg]F)
(sea level)
525, CJ1+............................... FJ44-1AP..................
205
115
165
255
deg
F 525A, CJ2............................... FJ44-2C...................
230
140
188
200
deg
F 525B, CJ3............................... FJ44-3A...................
202
117
155
200
deg
F
14 CFR part 23 certification experience to date has shown that fuel system hot weather certification testing with 110 [deg]F fuel temperatures is adequate for fuel system operations for fuel tank temperatures characterized by ambient air temperatures, including cooling, as a result of the atmospheric temperature lapse rate. Heating of the fuel that increases the airplane fuel tank system operational temperatures introduces a number of fuel tank system and airplane concerns. Each must be shown to be acceptable. Compliance by design
(i.e., lack of ability to shutoff the engine motive flow) may be utilized although associated type certificate data sheet information may also be necessary to assure future system changes are compliant.
The following are those concerns:
cir
Evaluation of engine, fuel tank system and airplane performance and engine compatibility with elevated fuel tank system temperatures. [Sec. 23.901, paragraphs (e)(1) and (e)(2); and
Sec. Sec. 23.939(a) and 23.951(a)]
cir
Evaluation of fuel tank system and airplane performance due to fuel degradation and resultant by-products at elevated fuel tank system temperatures. [Sec. Sec. 23.961, 23.939(a), 23.993(e), 23.1301, and 23.1529)]
cir
Evaluation of fuel tank system and airplane performance and engine compatibility due to the higher vapor/liquid ratios with elevated fuel tank system temperatures. [Sec. Sec. 23.903(f) and 23.951(a); Sec. 23.955, paragraphs (a) and (f); and Sec. Sec. 23.961 and 23.1301]
cir
Evaluation of fuel tank system and airplane performance and engine compatibility, due to the solubility of water and potential for greater microbial growth with elevated fuel tank system temperatures.
Sec. Sec. 23.951(c) and 23.971
cir
Evaluation of fuel tank system and airplane performance due to elevated fuel tank system material temperatures and surrounding structure compatibility. [Sec. Sec. 23.613(c), 23.963(a), 23.965(d), and 23.993(e)]
Page 68132
cir
Evaluation of fuel tank system component qualification as a result of elevated fuel tank system temperatures. [Sec. Sec. 23.1301, and 23.1309]
cir
Evaluation of service/maintenance instructions, activities, and personnel due to elevated fuel tank system temperatures. [Sec. 23.1529].
Type Certification Basis
Under the provisions of Sec. 21.101, Cessna Aircraft Company must show that the model 525C meets the applicable provisions of the regulations incorporated by reference in Type Certificate Number A1WI or the applicable regulations in effect on the date of application for the change to the model 525C. The regulations incorporated by reference in the type certificate are commonly referred to as the ``original type certification basis.'' In addition, the certification basis includes exemptions, if any; equivalent level of safety findings, if any; and the special condition adopted by this rulemaking action.
If the Administrator finds that the applicable airworthiness regulations in 14 CFR part 23 do not contain adequate or appropriate safety standards for the model 525C because of a novel or unusual design feature, special conditions are prescribed under the provisions of Sec. 21.16.
In addition to the applicable airworthiness regulations and special conditions, the model 525C must comply with the fuel vent and exhaust emission requirements of 14 CFR part 34 and the noise certification requirements of 14 CFR part 36.
Special conditions, as appropriate, as defined in Sec. 11.19, are issued in accordance with Sec. 11.38, and become part of the type certification basis in accordance with Sec. 21.101(b)(2).
Special conditions are initially applicable to the model for which they are issued. Should the type certificate for that model be amended later to include any other model that incorporates the same novel or unusual design feature, or should any other model already included on the same type certificate be modified to incorporate the same novel or unusual design feature, the special conditions would also apply to the other model under the provisions of Sec. 21.101(a)(1).
Novel or Unusual Design Features
The model 525C will incorporate the following novel or unusual design features:
High Fuel Temperatures.
Discussion of Comments
A notice of proposed special conditions No. 23-09-03-SC for the
Cessna Aircraft Company, model 525C airplanes was published on
September 1, 2009, 74 FR 45133. No comments were received, and the special conditions are adopted as proposed.
Applicability
As discussed above, these special conditions are applicable to the model 525C. Should Cessna Aircraft Company apply at a later date for a change to the type certificate to include another model incorporating the same novel or unusual design feature, the special conditions would apply to that model as well under the provisions of Sec. 21.101(a)(1).
Under standard practice, the effective date of final special conditions would be 30 days after the date of publication in the
Federal Register; however, as the certification date for the Cessna
Aircraft Company, model 525C is imminent, the FAA finds that good cause exists to make these special conditions effective upon issuance.
Conclusion
This action affects only certain novel or unusual design features on one model of airplanes. It is not a rule of general applicability, and it affects only the applicant who applied to the FAA for approval of these features on the airplane.
List of Subjects in 14 CFR Part 23
Aircraft, Aviation safety, Signs and symbols.
Citation 0
The authority citation for these special conditions is as follows:
Authority: 49 U.S.C. 106(g), 40113 and 44701; 14 CFR 21.16 and 21.17; and 14 CFR 11.38 and 11.19.
The Special Conditions 0
Accordingly, pursuant to the authority delegated to me by the
Administrator, the following special conditions are issued as part of the type certification basis for Cessna Aircraft Company, model 525C airplanes. 1. SC Sec. 23.961:
Instead of compliance with Sec. 23.961, the following apply:
Each fuel system must be free from vapor lock when using fuel at its critical temperature, with respect to vapor formation, when operating the airplane in all critical operating and environmental conditions for which approval is requested. For turbine fuel, the initial temperature must be 110 [deg]F, -0[deg], +5 [deg]F or the maximum outside air temperature for which approval is requested or the fuel tank system temperature that is determined to be more critical.
Issued in Kansas City, Missouri on December 16, 2009.
Kim Smith,
Manager, Small Airplane Directorate, Aircraft Certification Service.
FR Doc. E9-30436 Filed 12-22-09; 8:45 am
BILLING CODE 4910-13-P
