Design Considerations and Premarket Submission Recommendations for Interoperable Medical Devices; Draft Guidance for Industry and Food and Drug Administration Staff; Availability

Federal Register, Volume 81 Issue 16 (Tuesday, January 26, 2016)

Federal Register Volume 81, Number 16 (Tuesday, January 26, 2016)

Notices

Pages 4303-4305

From the Federal Register Online via the Government Publishing Office www.gpo.gov

FR Doc No: 2016-01471

-----------------------------------------------------------------------

DEPARTMENT OF HEALTH AND HUMAN SERVICES

Food and Drug Administration

Docket No. FDA-2015-D-4852

Design Considerations and Premarket Submission Recommendations for Interoperable Medical Devices; Draft Guidance for Industry and Food and Drug Administration Staff; Availability

AGENCY: Food and Drug Administration, HHS.

ACTION: Notice of availability.

-----------------------------------------------------------------------

SUMMARY: The Food and Drug Administration (FDA or Agency) is announcing the availability of the draft guidance entitled ``Design Considerations and Pre-market Submission Recommendations for Interoperable Medical Devices''. FDA is issuing this draft guidance to assist industry and FDA staff in identifying specific considerations related to the ability of electronic medical devices to safely and effectively exchange and use exchanged information. This document highlights considerations that should be included in the development and design of interoperable medical devices and provides recommendations for the content of premarket submissions and labeling for such devices. This draft guidance is not final nor is it in effect at this time.

DATES: Although you can comment on any guidance at any time (see 21 CFR 10.115(g)(5)), to ensure that the Agency considers your comment of this draft guidance before it begins work on the final version of the guidance, submit either electronic or written comments on the draft guidance by March 28, 2016.

ADDRESSES: You may submit comments as follows:

Electronic Submissions

Submit electronic comments in the following way:

Federal eRulemaking Portal: http://www.regulations.gov. Follow the instructions for submitting comments. Comments submitted electronically, including attachments, to http://www.regulations.gov will be posted to the docket unchanged. Because your comment will be made public, you are solely responsible for ensuring that your comment does not include any confidential information that you or a third party may not wish to be posted, such as medical information, your or anyone else's Social Security number, or confidential business information, such as a manufacturing process. Please note that if you include your name, contact information, or other information that identifies you in the body of your comments, that information will be posted on http://www.regulations.gov.

If you want to submit a comment with confidential information that you do not wish to be made available to the public, submit the comment as a written/paper submission and in the manner detailed (see ``Written/Paper Submissions'' and ``Instructions'').

Written/Paper Submissions

Submit written/paper submissions as follows:

Mail/Hand delivery/Courier (for written/paper submissions): Division of Dockets Management (HFA-305), Food and Drug Administration, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852.

For written/paper comments submitted to the Division of Dockets Management, FDA will post your comment, as well as any attachments, except for information submitted, marked and identified, as confidential, if submitted as detailed in ``Instructions''.

Page 4304

Instructions: All submissions received must include the Docket No. FDA-2015-D-4852 for ``Design Considerations and Pre-market Submission Recommendations for Interoperable Medical Devices''. Received comments will be placed in the docket and, except for those submitted as ``Confidential Submissions,'' publicly viewable at http://www.regulations.gov or at the Division of Dockets Management between 9 a.m. and 4 p.m., Monday through Friday.

Confidential Submissions--To submit a comment with confidential information that you do not wish to be made publicly available, submit your comments only as a written/paper submission. You should submit two copies total. One copy will include the information you claim to be confidential with a heading or cover note that states ``THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION''. The Agency will review this copy, including the claimed confidential information, in its consideration of comments. The second copy, which will have the claimed confidential information redacted/blacked out, will be available for public viewing and posted on http://www.regulations.gov. Submit both copies to the Division of Dockets Management. If you do not wish your name and contact information to be made publicly available, you can provide this information on the cover sheet and not in the body of your comments and you must identify this information as ``confidential''. Any information marked as ``confidential'' will not be disclosed except in accordance with 21 CFR 10.20 and other applicable disclosure law. For more information about FDA's posting of comments to public dockets, see 80 FR 56469, September 18, 2015, or access the information at: http://www.fda.gov/regulatoryinformation/dockets/default.htm.

Docket: For access to the docket to read background documents or the electronic and written/paper comments received, go to http://www.regulations.gov and insert the docket number, found in brackets in the heading of this document, into the ``Search'' box and follow the prompts and/or go to the Division of Dockets Management, 5630 Fishers Lane, Rm. 1061, Rockville, MD 20852.

An electronic copy of the guidance document is available for download from the Internet. See the SUPPLEMENTARY INFORMATION section for information on electronic access to the guidance. Submit written requests for a single hard copy of the draft guidance document entitled ``Design Considerations and Pre-market Submission Recommendations for Interoperable Medical Devices'' to the Office of the Center Director, Guidance and Policy Development, Center for Devices and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, Rm. 5431, Silver Spring, MD 20993-0002; or the Office of Communication, Outreach, and Development, Center for Biologics Evaluation and Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 71, Rm. 3128, Silver Spring, MD 20993-0002. Send one self-addressed adhesive label to assist that office in processing your request.

FOR FURTHER INFORMATION CONTACT: Heather Agler, Center for Devices and Radiological Health, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 66, Rm. 5570, Silver Spring, MD 20993-0002, 301-796-6340; and Stephen Ripley, Center for Biologics Evaluation and Research, Food and Drug Administration, 10903 New Hampshire Ave., Bldg. 71, Rm. 7301, Silver Spring, MD 20993-0002, 240-402-7911.

SUPPLEMENTARY INFORMATION:

1. Background

   The need and desire to connect medical devices to other products, technologies, and systems is growing in the health care community. As electronic medical devices are increasingly connected to each other and to other technology, the ability of these connected systems to safely and effectively exchange and use the information that has been exchanged becomes increasingly important. Advancing the ability of medical devices to exchange and use information safely and effectively with other medical devices, as well as other technology, offers the potential to increase efficiency in patient care.

   FDA intends to promote the development and availability of safe and effective interoperable medical devices. FDA is issuing this draft guidance to assist industry and FDA staff in identifying specific considerations related to the ability of electronic medical devices to safely and effectively exchange and use exchanged information. This document highlights considerations that should be included in the development and design of interoperable medical devices and provides recommendations for the content of premarket submissions and labeling for such devices.

2. Significance of Guidance

   This draft guidance is being issued consistent with FDA's good guidance practices regulation (21 CFR 10.115). The draft guidance, when finalized, will represent the current thinking of FDA on ``Design Considerations and Pre-market Submission Recommendations for Interoperable Medical Devices''. It does not establish any rights for any person and is not binding on FDA or the public. You can use an alternative approach if it satisfies the requirements of the applicable statutes and regulations.

3. Electronic Access

   Persons interested in obtaining a copy of the draft guidance may do so by downloading an electronic copy from the Internet. A search capability for all Center for Devices and Radiological Health guidance documents is available at http://www.fda.gov/MedicalDevices/DeviceRegulationandGuidance/GuidanceDocuments/default.htm. Guidance documents are also available at http://www.fda.gov/BiologicsBloodVaccines/GuidanceComplianceRegulatoryInformation/default.htm or http://www.regulations.gov. Persons unable to download an electronic copy of ``Design Considerations and Pre-market Submission Recommendations for Interoperable Medical Devices'' may send an email request to CDRH-Guidance@fda.hhs.gov to receive an electronic copy of the document. Please use the document number 1500015 to identify the guidance you are requesting.

4. Paperwork Reduction Act of 1995

   This draft guidance refers to previously approved collections of information found in FDA regulations. These collections of information are subject to review by the Office of Management and Budget (OMB) under the Paperwork Reduction Act of 1995 (44 U.S.C. 3501-3520). The collections of information in 21 CFR part 820 have been approved under OMB control number 0910-0073; the collections of information in 21 CFR part 812 have been approved under OMB control number 0910-0078; the collections of information in 21 CFR part 807, subpart E, have been approved under OMB control number 0910-0120; the collections of information in 21 CFR part 814, subparts A through E, have been approved under OMB control number 0910-0231; the collections of information in 21 CFR part 814, subpart H have been approved under OMB control number 0910-0332; the collections of information in 21 CFR

   Page 4305

   part 601 have been approved under OMB control number 0910-0338; and the collections of information in 21 CFR parts 801 and 809 have been approved under OMB control number 0910-0485.

   Dated: January 21, 2016.

   Leslie Kux,

   Associate Commissioner for Policy.

   FR Doc. 2016-01471 Filed 1-25-16; 8:45 am

   BILLING CODE 4164-01-P