Your World of Legal Intelligence
 United States | 1-800-335-6202

Airworthiness Directives; Rolls-Royce plc (RR) Turbofan Engines

As Enacted ( Federal Register) Cited authorities 4 Cited in Related
Vincent

Federal Register, Volume 77 Issue 45 (Wednesday, March 7, 2012)

Federal Register Volume 77, Number 45 (Wednesday, March 7, 2012)

Rules and Regulations

Pages 13483-13485

From the Federal Register Online via the Government Printing Office www.gpo.gov

FR Doc No: 2012-5370

Page 13483

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

Docket No. FAA-2010-0562; Directorate Identifier 2009-NE-29-AD; Amendment 39-16969; AD 2012-04-13

RIN 2120-AA64

Airworthiness Directives; Rolls-Royce plc (RR) Turbofan Engines

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Final rule.

-----------------------------------------------------------------------

SUMMARY: We are superseding an existing airworthiness directive (AD) for all RR model RB211-524G2-T-19, -524G3-T-19, -524H-T-36, and -524H2-

T-19; and RB211-Trent 553-61, 553A2-61, 556-61, 556A2-61, 556B-61 556B2-61, 560-61, 560A2-61; RB211-Trent 768-60, 772-60, 772B-60; and RB211-Trent 875-17, 877-17, 884-17, 884B-17, 892-17, 892B-17, and 895-

17 turbofan engines that have a high-pressure (HP) compressor stage 1 to 4 rotor disc with a part number (P/N) listed in Table 1 of the AD. That AD currently requires repetitive inspections of the axial dovetail slots, and follow-on corrective action depending on findings. Since we issued that AD, we determined that the definition of shop visit is too restrictive in the existing AD. This continues to require those repetitive inspections and follow-on corrective actions. This new AD changes the definition of a shop visit to be less restrictive. This AD was prompted by our determination that the definition of ``shop visit'' in the existing AD is too restrictive, in that it would require operators to inspect more often than required to ensure safety. We are issuing this AD to detect cracks in the HP compressor stage 1 and 2 disc posts, which could result in failure of the disc post and HP compressor blades, release of uncontained engine debris, and damage to the airplane.

DATES: This AD is effective April 11, 2012.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in the AD as of April 11, 2012.

ADDRESSES: For service information identified in this AD, contact Rolls-Royce plc, Corporate Communications, P.O. Box 31, Derby, England, DE248BJ; phone: 011-44-1332-242424; fax: 011-44-1332-245418 or email from http://www.rolls-royce.com/contact/civil_team.jsp, or download the publication from https://www.aeromanager.com. You may review copies of the referenced service information at the FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington, MA. For information on the availability of this material at the FAA, call 781-

238-7125.

Examining the AD Docket

You may examine the AD docket on the Internet at http://www.regulations.gov; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this AD, the regulatory evaluation, any comments received, and other information. The address for the Docket Office (phone: 800-647-5527) is Document Management Facility, U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE., Washington, DC 20590.

FOR FURTHER INFORMATION CONTACT: Alan Strom, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington, MA 01803; phone: 781-238-7143; fax: 781-238-7199; email: alan.strom@faa.gov.

SUPPLEMENTARY INFORMATION:

Discussion

We issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 to supersede AD 2011-09-07, Amendment 39-16669 (76 FR 24793, May 3, 2011). That AD applies to the specified products. The NPRM published in the Federal Register on October 20, 2011 (76 FR 65136). That NPRM proposed to continue to require initial and repetitive fluorescent penetrant inspections of the HP compressor stage 1 to 4 rotor discs at the first shop visit after accumulating 1,000 cycles-

since-new on the stage 1 to 4 rotor discs or at the next shop visit after the effective date of that AD, which ever occurs later. That NPRM also proposed to continue to require repetitive inspections at every shop visit. That NPRM also proposed to change the definition of a shop visit to be less restrictive.

Comments

We gave the public the opportunity to participate in developing this AD. The following presents the comments received on the proposal and the FAA's response to each comment.

Support for the NPRM

Two commenters, the Boeing Company and American Airlines, support the intent of the NPRM (76 FR 65136, October 20, 2011).

Request To Change From a Supersedure to a Revision

One commenter, American Airlines, requested that we change the proposed AD (76 FR 65136, October 20, 2011) from being an AD supersedure to being an AD revision of the existing AD 2011-09-07 (76 FR 24793, May 3, 2011), or, have Rolls-Royce plc revise Alert Service Bulletin (ASB) No. RB.211-72-AF964 to remove the reference to AD 2011-

09-07, so that we can reference that latest ASB revision in the AD. The commenter stated that the ASB revision should be issued before the AD is issued, and referenced in the AD, to avoid the burden of needing global Alternative Methods of Compliances written.

We do not agree. The reference to the previous AD (76 FR 24793, May 3, 2011) in ASB No. RB.211-72-AF964 is not the section of the ASB incorporated by reference by this AD. We can not delay publishing an AD to wait for an administrative change to a service bulletin. Administrative updates to service bulletins are made for a variety of reasons. These revisions are easily handled by the alternative method of compliance process described in paragraph (i) of this AD. We did not change the AD.

Conclusion

We reviewed the relevant data, considered the comments received, and

Page 13484

determined that air safety and the public interest require adopting the AD as proposed.

Costs of Compliance

Based on the service information, we estimate that this AD will affect about 371 products of U.S. registry. We also estimate that it will take about 20 work-hours per product to comply with this AD. The average labor rate is $85 per work-hour. No parts will be required per product. Based on these figures, we estimate the cost of the AD on U.S. operators to be $630,700.

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, Section 106, describes the authority of the FAA Administrator. Subtitle VII, Aviation Programs, describes in more detail the scope of the Agency's authority.

We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701, ``General requirements.'' Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

We have determined that this AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a ``significant regulatory action'' under Executive Order 12866,

(2) Is not a ``significant rule'' under DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979),

(3) Will not affect intrastate aviation in Alaska, and

(4) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety.

Adoption of the Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0

  1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.

    Sec. 39.13 Amended

    0

  2. The FAA amends Sec. 39.13 by removing airworthiness directive (AD) 2011-09-07, Amendment 39-16669 (76 FR 24793, May 3, 2011), and adding the following new AD:

    2012-04-13 Rolls-Royce plc: Amendment 39-16969; Docket No. FAA-2010-

    0562; Directorate Identifier 2009-NE-29-AD.

    (a) Effective Date

    This airworthiness directive (AD) is effective April 11, 2012.

    (b) Affected ADs

    This AD supersedes AD 2011-09-07, Amendment 39-16669 (76 FR 24793, May 3, 2011).

    (c) Applicability

    This AD applies to Rolls-Royce plc (RR) model RB211-524G2-T-19, -524G3-T-19, -524H-T-36, and -524H2-T-19; and RB211-Trent 553-61, 553A2-61, 556-61, 556A2-61, 556B-61 556B2-61, 560-61, 560A2-61; RB211-Trent 768-60, 772-60, 772B-60; and RB211-Trent 875-17, 877-17, 884-17, 884B-17, 892-17, 892B-17, and 895-17 turbofan engines that have a high-pressure (HP) compressor stage 1 to 4 rotor disc with a part number (P/N) listed in Table 1 of this AD.

    Table 1--Affected HP Compressor Stage 1 to 4 Rotor Disc P/Ns by Engine

    Model

    ------------------------------------------------------------------------

    HP compressor stage 1 to 4

    Engine model rotor disc P/N

    ------------------------------------------------------------------------

    (1) RB211-524G2-T-19, -524G3-T-19, - FW20195, FK25502, or FW23711.

    524H-T-36, and -524H2-T-19.

    (2) RB211 Trent 553-61, 553A2-61, 556- FK30524.

    61, 556A2-61, 556B-61, 556B2-61, 560-

    61, and 560A2-61.

    (3) RB211 Trent 768-60, 772-60, and FK22745, FK24031, FK26185,

    772B-60. FK23313, FK25502, FK32129,

    FW20195, FW20196, FW20197,

    FW20638, or FW23711.

    (4) RB211 Trent 875-17, 877-17, 884-17, FK24009, FK26167, FK32580,

    884B-17, 892-17, 892B-17, and 895-17. FW11590, or FW61622.

    ------------------------------------------------------------------------

    (d) Unsafe Condition

    This AD was prompted by our determination that the definition of ``shop visit'' in the existing AD is too restrictive, in that it would require operators to inspect more often than required to ensure safety. We are issuing this AD to detect cracks in the HP compressor stage 1 and 2 disc posts, which could result in failure of the disc post and HP compressor blades, release of uncontained engine debris, and damage to the airplane.

    (e) Compliance

    Comply with this AD within the compliance times specified, unless already done.

    (f) Cleaning and Inspection

    (1) Clean and perform a fluorescent penetrant inspection of the HP compressor stage 1 to 4 rotor discs at the first shop visit after accumulating 1,000 cycles since new on the stage 1 to 4 rotor discs or at the next shop visit after the effective date of this AD, which ever occurs later.

    (2) Use paragraph 3.A through 3.E.(11) of the Accomplishment Instructions of Rolls-Royce Alert Service Bulletin (ASB) No. RB.211-

    72-AF964, Revision 2, dated June 8, 2011, to do the inspections.

    (3) Thereafter at every engine shop visit, perform the inspection specified by paragraph (f) of this AD.

    (g) Definition

    For the purpose of this AD, an ``engine shop visit'' is whenever all compressor blades are removed from the HP compressor drum.

    (h) Credit for Previous Action

    A cleaning and inspection performed before the effective date of this AD using Rolls-Royce ASB No. RB.211-72-AF964, Revision 1, dated June 6, 2008, or Revision 2, dated June 8, 2011, satisfies a cleaning and inspection cycle required by this AD.

    (i) Alternative Methods of Compliance (AMOCs)

    The Manager, Engine Certification Office, FAA may approve AMOCs for this AD. Use

    Page 13485

    the procedures found in 14 CFR 39.19 to make your request.

    (j) Related Information

    (1) For more information about this AD, contact Alan Strom, Aerospace Engineer, Engine Certification Office, FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington, MA 01803; phone: 781-238-7143; fax: 781-238-7199; email: alan.strom@faa.gov.

    (2) See European Aviation Safety Agency Airworthiness Directive 2009-0073R1, dated April 8, 2009, for related information.

    (k) Material Incorporated by Reference

    (1) You must use the following service information to do the actions required by this AD, unless the AD specifies otherwise. The Director of the Federal Register approved the incorporation by reference (IBR) under 5 U.S.C. 552(a) and 1 CFR part 51 of the following service information on the date specified:

    (i) Rolls-Royce Alert Service Bulletin No. RB.211-72-AF964, Revision 2, dated June 8, 2011 approved for IBR April 11, 2012.

    (ii) Rolls-Royce ASB No. RB.211-72-AF964, Revision 1, dated June 6, 2008 approved for IBR June 7, 2011 (76 FR 24793, May 3, 2011).

    (2) For service information identified in this AD, contact Rolls-Royce plc, Corporate Communications, P.O. Box 31, Derby, England, DE248BJ; phone: 011-44-1332-242424; fax: 011-44-1332-245418 or email from http://www.rolls-royce.com/contact/civil_team.jsp, or download the publication from https://www.aeromanager.com.

    (3) You may review copies of the service information at the FAA, Engine & Propeller Directorate, 12 New England Executive Park, Burlington, MA. For information on the availability of this material at the FAA, call 781-238-7125.

    (4) You may also review copies of the service information that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal-register/cfr/ibr_locations.html.

    Issued in Burlington, Massachusetts, on February 23, 2012.

    Peter A. White,

    Manager, Engine & Propeller Directorate, Aircraft Certification Service.

    FR Doc. 2012-5370 Filed 3-6-12; 8:45 am

    BILLING CODE 4910-13-P

VLEX uses login cookies to provide you with a better browsing experience. If you click on 'Accept' or continue browsing this site we consider that you accept our cookie policy. ACCEPT