Fuel economy standards: Light trucks; 2008-2011 model years Correction,
[Federal Register: April 14, 2006 (Volume 71, Number 72)]
[Rules and Regulations]
[Page 19449-19452]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr14ap06-9]
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
49 CFR Parts 523, 533 and 537
[Docket No. NHTSA 2006-24309]
RIN 2127-AJ61
Average Fuel Economy Standards for Light Trucks Model Years 2008- 2011
AGENCY: National Highway Traffic Safety Administration (NHTSA), Department of Transportation.
[[Page 19450]]
ACTION: Final rule; correction.
SUMMARY: The National Highway Traffic Safety Administration published in the Federal Register of April 6, 2006, a final rule establishing Corporate Average Fuel Economy (CAFE) standards for light trucks manufactured in model years 2008 through 2011. Inadvertently, the document had the wrong docket number; footprint and target fuel economy values provided in example calculations did not have the correct number of decimal places; the definition of ``footprint'' in the regulatory text was incorrect; and Figure 1 of the regulatory text incorrectly referenced ``model,'' as opposed to ``model type.'' Additionally, there was a typographical error in the regulatory text regarding the flat floor provision. This document makes the appropriate corrections.
Effective Date: August 4, 2006. Petitions for reconsideration must be received by May 22, 2006.
FOR FURTHER INFORMATION CONTACT: For technical issues, call Ken Katz, Lead Engineer, Fuel Economy Division, Office of International Vehicle, Fuel Economy, and Consumer Standards, at (202) 366-0846, facsimile (202) 493-2290, electronic mail kkatz@nhtsa.dot.gov. For legal issues, call Stephen Wood or Christopher Calamita of the Office of the Chief Counsel, at (202) 366-2992, or e-mail them at swood@nhtsa.dot.gov or ccalamita@nhtsa.dot.gov.
SUPPLEMENTARY INFORMATION: The National Highway Traffic Safety Administration published in the Federal Register of April 6, 2006, (71 FR 17566) a final rule establishing fuel Corporate Average Fuel Economy (CAFE) standards for light trucks manufactured in model years 2008 through 2011. Inadvertently, the document had the wrong docket number; footprint and target fuel economy values provided in example calculations did not have the correct number of decimal places; the regulatory text incorrectly incorporated the proposed definition of ``footprint,'' as opposed to the final definition discussed in the preamble of the final rule; and Figure 1 of the regulatory text incorrectly referenced ``model'' instead of ``model type.''
This document provides the correct docket number, amends the footprint values in example calculations such that the footprint values are provided to the nearest tenth of a square foot, amends the fuel economy target values in example calculations such that the target values are provided to the nearest hundredth mile per gallon, amends the definition of ``footprint'' to clarify the precision of the value and reflect the definition discussed in the preamble, and amends Figure 1 by referencing ``model type.'' Additionally, this document corrects a typographical error in the ``flat floor'' regulatory text, i.e., ``flat-leveled cargo surface'' is corrected to read ``flat, leveled cargo surface.''
In FR Docket No. NHTSA 2006-24306 published on April 6, 2006 (71 FR 17566) make the following corrections.
On page 17566, in the first column, the Docket number is revised to read, ``NHTSA No. 2006-24309.''
On page 17608, Table 5 is revised to read as follows,
Table 5.--Illustrative Example of Method of Assessing Compliance Under a Continuous Function Approach
Fuel economy Production Footprint (sq. Footprint Model
(mpg)
(units)
ft.)
target (mpg)
A...............................................
27.0
100,000
43.0
27.53 B...............................................
24.0
100,000
42.0
27.93 C...............................................
22.0
100,000
52.0
23.71 D...............................................
19.0
100,000
54.0
23.15
On page 17609, at the top of the page, the formula labeled ``Required CAFE Level'' is revised to read as follows,
[GRAPHIC] [TIFF OMITTED] TR14AP06.003
On page 17676, in the first column, the definition of ``Footprint,'' is revised to read, ``Footprint is defined as the product of track width (measured in inches and rounded to the nearest tenth of an inch) times wheelbase (measured in inches and rounded to the nearest tenth of an inch) divided by 144 and then rounded to the nearest tenth of a square foot. For purposes of this definition, track width is the lateral distance between the centerlines of the base tires at ground, including the camber angle. For purposes of this definition, wheelbase is the longitudinal distance between front and rear wheel centerlines.''
On page 17676, in the third column, paragraph (ii) is revised to read, ``For light trucks manufactured in model year 2008 and beyond, for vehicles equipped with at least 3 rows of designated seating positions as standard equipment, permit expanded use of the automobile for cargo-carrying purposes or other nonpassenger-carrying purposes through the removal or stowing of foldable or pivoting seats so as to create a flat, leveled cargo surface extending from the forwardmost point of installation of those seats to the rear of the automobile's interior.''
On the bottom of page 17676 and continuing on the top of page 17677, between Table IV and V, Figure 1 is revised to read as follows,
[[Page 19451]]
[GRAPHIC] [TIFF OMITTED] TR14AP06.001
Where:
N is the total number (sum) of light trucks produced by a manufacturer, Niis the number (sum) of the ithlight truck model type produced by the manufacturer, and Tiis fuel economy target of the ithlight truck model type, which is determined according to the following formula, rounded to the nearest hundredth:
[GRAPHIC] [TIFF OMITTED] TR14AP06.000
Where:
Parameters a, b, c, and d are defined in Sec. 533.3 Table V; e = 2.718; and x = footprint (in square feet, rounded to the nearest tenth) of the model type
On page 17677, in the second column, Appendix A Table 1, is revised to read as follows:
``Appendix A Table 1''
Fuel
Footprint Model
economy Volume (ft\2\)
A...................................... 27.0 1,000 42.0 B...................................... 25.6 1,500 44.0 C...................................... 25.4 1,000 46.0 D...................................... 22.1 2,000 50.0 E...................................... 22.4 3,000 55.0 F...................................... 20.2 1,000 66.0
Note to Appendix A Table 1. Manufacturer X's required corporate average fuel economy level under Sec. 533.5(g) would be calculated by first determining the fuel economy target applicable to each vehicle as illustrated in ``Appendix A Figure 1:''
On page 17677, in the third column, Appendix A Figure 1 is revised to read as follows:
``Appendix A Figure 1''
MY 2008 fuel Model
Footprint
economy (ft\2\) target (mpg)
A.......................................
42.0
26.20 B.......................................
44.0
25.50 C.......................................
46.0
24.80 D.......................................
50.0
23.30 E.......................................
55.0
21.70 F.......................................
66.0
20.30
Note to Appendix A Figure 1. Accordingly, vehicle models A, B, C, D, E, and F would be compared to fuel economy values of 26.20, 25.50, 24.80, 23.30, 21.70, and 20.30 mpg, respectively. With the appropriate fuel economy targets calculated, Manufacturer X's required fuel economy would be calculated as illustrated in ``Appendix A Figure 2.''
On page 17677, Appendix A Figure 2, is revised to read as follows:
[GRAPHIC] [TIFF OMITTED] TR14AP06.002
[[Page 19452]]
Issued: April 7, 2006. Ronald Medford, Senior Associate Administrator for Vehicle Safety.
[FR Doc. 06-3533 Filed 4-11-06; 3:08 pm]
BILLING CODE 4910-59-P
