Implementing Rules for the United States-Mexico-Canada Agreement Implementation Act; Correction
| Published date | 15 April 2021 |
| Citation | 86 FR 19781 |
| Record Number | 2021-07665 |
| Section | Rules and Regulations |
| Court | International Trade Commission |
19781
Federal Register / Vol. 86, No. 71 / Thursday, April 15, 2021 / Rules and Regulations
document. FAA Order 7400.11E lists
Class A, B, C, D, and E airspace areas,
air traffic service routes, and reporting
points.
The Rule
The FAA is amending 14 CFR part 71
by establishing Class E airspace
extending upward from 700 feet above
the surface at Hughes Airport, Hughes
AK.
The Class E airspace will be
established within a 3.8-mile radius of
the airport and within an area 2 miles
each side of the 194° bearing extending
from the airport 6.4 miles south. This
area will protect aircraft on approach to
runway 36 as they descend through
1,500 feet above ground level (AGL). In
addition, an extension in the shape of a
dogleg will be established 1.8 miles
each side of the 14° bearing extending
from the 3.8-mile radius to 6 miles north
of the airport and then 1.8 miles each
side of the 39° bearing from a point in
space, lat. 66°08′14″ N, long. 154°12′17″
W, forming an angle that extends from
the 3.8-mile radius northeast 9.5 miles
from the airport. This section will
protect aircraft on approach to runway
18 descending through 1,500 feet AGL
and those aircraft on departure until
reaching 1,200 feet AGL.
FAA Order 7400.11, Airspace
Designations and Reporting Points, is
published yearly and effective on
September 15.
Regulatory Notices and Analyses
The FAA has determined that this
regulation only involves an established
body of technical regulations for which
frequent and routine amendments are
necessary to keep them operationally
current, is non-controversial and
unlikely to result in adverse or negative
comments. It, therefore: (1) Is not a
‘‘significant regulatory action’’ under
Executive Order (E.O.) 12866; (2) is not
a ‘‘significant rule’’ under DOT
Regulatory Policies and Procedures (44
FR 11034; February 26, 1979); and (3)
does not warrant preparation of a
Regulatory Evaluation as the anticipated
impact is so minimal. Since this is a
routine matter that only affects air traffic
procedures and air navigation, it is
certified that this rule, when
promulgated, will not have a significant
economic impact on a substantial
number of small entities under the
criteria of the Regulatory Flexibility Act.
Environmental Review
The FAA has determined that this
action qualifies for categorical exclusion
under the National Environmental
Policy Act in accordance with FAA
Order 1050.1F, ‘‘Environmental
Impacts: Policies and Procedures,’’
paragraph 5–6.5a. This airspace action
is not expected to cause any potentially
significant environmental impacts, and
no extraordinary circumstances exist
that warrant preparation of an
environmental assessment.
Lists of Subjects in 14 CFR Part 71
Airspace, Incorporation by reference,
Navigation (air).
Adoption of the Amendment
In consideration of the foregoing, the
Federal Aviation Administration
amends 14 CFR part 71 as follows:
PART 71—DESIGNATION OF CLASS A,
B, C, D, AND E AIRSPACE AREAS; AIR
TRAFFIC SERVICE ROUTES; AND
REPORTING POINTS
■1. The authority citation for part 71
continues to read as follows:
Authority: 49 U.S.C. 106(f), 106(g); 40103,
40113, 40120; E.O. 10854, 24 FR 9565, 3 CFR,
1959–1963 Comp., p. 389.
§ 71.1 [Amended]
■2. The incorporation by reference in
14 CFR 71.1 of FAA Order 7400.11E,
Airspace Designations and Reporting
Points, dated July, 21, 2020 and
effective September 15, 2020, is
amended as follows:
Paragraph 6005 Class E Airspace.
* * * * *
AAL AK E5 Hughes, AK [New]
Hughes Airport, AK
(66°02′21″ N, 154°15′53″ W)
That airspace within a 3.8-mile radius of
Hughes Airport, AK, and that airspace 2
miles each side of the 194° bearing extending
from the 3.8-mile radius south 6.4 miles from
the airport, and that airspace extending from
the 3.8-mile radius beginning 1.8 miles west
of the 14° bearing to lat. 66°08′55″ N, long.
154°16′32″ W to lat. 66°12′15″ N, long.
154°10′06″ W to lat. 66°10′03″ N, long.
154°03′03″ W to lat. 66°07′23″ N, long.
154°08′18″ W to the point on the 3.8-mile
radius 1.8 miles east of the 14° bearing.
Issued in Des Moines, Washington, on
April 9, 2021.
B.G. Chew,
Acting Group Manager, Operations Support
Group, Western Service Center.
[FR Doc. 2021–07667 Filed 4–14–21; 8:45 am]
BILLING CODE 4910–13–P
INTERNATIONAL TRADE
COMMISSION
19 CFR Part 208
Implementing Rules for the United
States-Mexico-Canada Agreement
Implementation Act; Correction
AGENCY
: United States International
Trade Commission.
ACTION
: Final rule; correction
SUMMARY
: The United States
International Trade Commission
(Commission) is correcting a final rule
that appeared in the Federal Register on
April 8, 2021. The rule concerns the
practices and procedures for
investigations of United States-Mexico
cross-border long-haul trucking services
provided for in the United States-
Mexico-Canada Agreement
Implementation Act.
DATES
: Effective May 10, 2021.
FOR FURTHER INFORMATION CONTACT
: Lisa
R. Barton, Secretary to the Commission,
United States International Trade
Commission, telephone (202) 205–2000,
or William Gearhart, Office of the
General Counsel, United States
International Trade Commission,
telephone (202) 205–3091. Hearing-
impaired individuals may obtain
information on this matter by contacting
the Commission’s TDD terminal at 202–
205–1810. General information
concerning the Commission may also be
obtained by accessing its website at
https://www.usitc.gov.
SUPPLEMENTARY INFORMATION
: In FR Doc.
2021–07181 appearing on page 18183 in
the Federal Register on April 8, 2021,
the following correction is made:
§ 208.5 [Corrected]
■On page 18185 in the second column,
in part 208, the instruction ‘‘2. Amend
§ 208.5 by revising paragraph (e)(i)(vi) to
read as follows:’’ is corrected to read ‘‘2.
Amend § 208.5 by revising paragraph
(e)(1)(vi) to read as follows:’’
By order of the Commission.
Issued: April 9, 2021.
Lisa Barton,
Secretary to the Commission.
[FR Doc. 2021–07665 Filed 4–14–21; 8:45 am]
BILLING CODE 7020–02–P
VerDate Sep<11>2014 15:42 Apr 14, 2021 Jkt 253001 PO 00000 Frm 00005 Fmt 4700 Sfmt 9990 E:\FR\FM\15APR1.SGM 15APR1
jbell on DSKJLSW7X2PROD with RULES
