N.M. Code R. § 20.11.65.18 Cutback Asphalt

• Library: New Mexico Administrative Code
• Edition: 2023
• Currency: Current through Register Vol. 34, No. 24, December 19, 2023
• Citation: N.M. Code R. § 20.11.65.18
• Year: 2023

A. No person shall cause, allow, or permit the use of cutback asphalt in quantities greater than 100 pounds per application directly onto existing or new paved surfaces without first obtaining a permit for such use from the department.

B. The director of the department may only issue a permit to use cutback asphalt if it is determined, based on information supplied by the applicant, that less than 25 tons per year of VOC's will be emitted to the ambient air as a result of the activities approved under the permit.

C. Penetrate uses: for the purposes of this subsection, asphalt cement cut with naphtha for the purposes of getting surface penetration into existing driveway and parking lot surfaces shall be exempt from the requirements of Subsections A and B of 20.11.65.18 NMAC. However, this exemption does not apply...