Periodic Reporting
Federal Register: December 28, 2009 (Volume 74, Number 247)
Proposed Rules
Page 68556-68557
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
DOCID:fr28de09-29
POSTAL REGULATORY COMMISSION 39 CFR Part 3050
Docket No. RM2010-6; Order No. 363
Periodic Reporting
AGENCY: Postal Regulatory Commission.
ACTION: Proposed rule; notice of availability of rulemaking petition.
SUMMARY: The Postal Service has proposed adjustments to the methodology of a key element in the Periodicals cost model. If adopted, the adjustments could affect the price of postage for periodical publications. The Commission is establishing a docket to consider this proposal and invites public comment.
DATES: Comments are due: January 11, 2010.
ADDRESSES: Submit comments electronically via the Commission's Filing
Online system at http://www.prc.gov. Commenters who cannot file submit their views electronically should contact the person identified in
``FOR FURTHER INFORMATION CONTACT'' by telephone for advice on alternatives to electronic filing.
FOR FURTHER INFORMATION CONTACT: Stephen L. Sharfman, General Counsel, at 202-789-6824 or stephen.sharfman@prc.gov.
SUPPLEMENTARY INFORMATION: On December 11, 2009, the Postal Service filed a petition to initiate an informal rulemaking proceeding to consider changes in the methods approved for use in periodic reporting.\1\ Proposal Twenty-Nine is part of a developing methodology for estimating the ratio of machine-sorted flats (automated or mechanical) to total sorted flats in the Incoming Secondary operation.
The Postal Service refers to this as the ``In-Plant IS Coverage
Factor.'' It is a key element in the Postal Service's Periodicals cost model. The In-Plant IS Coverage Factor is currently an input into the calculation of the Auto/Mech Factor. The Auto/Mech factor represents the percent of Periodicals that arrive at plants with mechanized sorting equipment that receive a mechanized incoming secondary sort.
The percentage of Periodicals that receive a mechanized incoming secondary sort (i.e. the In-Plant IS Coverage Factor) depends on two things: the percentage of Periodicals volume arriving at plants with mechanized flat sorting equipment (also referred to as the Mechanized
Coverage Factor), and the percentage of Periodicals that receive a mechanized incoming secondary sort once they arrive at a plant with mechanized flat sorting equipment. (Some flats will be rejected by the flat sorting machine within the plant.) In mathematical terms, the In-
Plant IS Coverage Factor is the product of the Auto/Mech Factor and the
Mechanized Coverage Factor.
\1\ Petition of the United States Postal Service Requesting
Initiation of a Proceeding to Consider a Proposed Change in Analytic
Principles (Proposal Twenty-nine), December 11, 2009 (Petition).
As part of the changes made prior to the FY 2008 Annual Compliance
Report (ACR), the Commission approved the use of MODS and RPW data to directly calculate the In-Plant IS Coverage Factor.\2\ The previous method assumed that the Auto/Mech factor was 85 percent. The Mechanized
Coverage Factor had previously been updated in Docket No. R2006-1. In
Docket No. RM2009-1, the Commission considered the Postal Service's proposal to directly calculate the In-Plant IS Coverage Factor as the ratio of non-carrier route flats sorted on mechanized sorting equipment and recorded in MODS reports and the volume of non-carrier route flats recorded in the RPW. The Commission approved the modification, but noted that the directly measured In-Plant IS Factor ``is an imperfect proxy for the mechanization rate for the incoming secondary flat bundle sorting operation.''\3\
\2\ See Docket No. RM2009-1, Petition of the United States
Postal Service Requesting Initiation of a Proceeding to Consider
Further Proposed Methodology Changes for the FY 2008 ACR, Proposal
Twelve, November 4, 2008.
\3\ See Docket No. RM2009-1, PRC Order No. 170, Order Concerning
Costing Methods Used in Periodic Reporting (Proposal Twelve),
January 12, 2009, at 14.
In its FY 2008 ACR, the Postal Service estimated the In-Plant IS
Coverage Factor using the newly approved method, and also re-ordered the mathematical relation between the In-Plant IS Coverage Factor, the
Mechanized Coverage Factor, and the Auto/Mech Factor. Doing this resulted in a value for the Auto/Mech Factor of approximately 99 percent. The Commission rejected this derived Auto/Mech Factor. It viewed the formula revision which produced this result as an unapproved methodology change. It was also concerned that the very high derived value of the Auto/Mech Factor indicated that the use of this revised formula could easily produce the illogical conclusion that more than 100 percent of flats arrived at plants with mechanized sorting equipment. See FY2008 Annual Compliance Determination, at 55-56.
This year, in anticipation of the FY 2009 ACR, the Postal Service proposed to again calculate the In-Plant IS Coverage Factor using MODS and RPW data, but promised to take remedial steps if the resulting coverage factor was too close to 100 percent.\4\ The Commission approved that modification but recommended that the Postal Service consider revising it in certain respects to avoid an estimate that is unrealistically high.\5\ Meanwhile, the Postal Service filed a proposal to use data from somewhat different sources to calculate the Mechanized
Coverage Factor.\6\ That proposal is still pending Commission approval.
\4\ Docket No. RM2009-10, Petition of the United States Postal
Service Requesting Initiation of a Proceeding to Consider Proposed
Changes in Analytic Principles (Proposals Three -Nineteen), July 28, 2009, Proposal Twelve, at 3.
\5\ See Docket No. RM2009-10, PRC Order No. 339, Order on
Analytical Principles Used in Periodic Reporting (Proposals Three
Through Nineteen), November 13, 200, at 35.
\6\ See Docket No. RM2010-4, Petition of the United States
Postal Service Requesting Initiation of a Proceeding to Consider
Proposed Changes in Analytic Principles (Proposals Twenty-Two-
Twenty-Five), October 23, 2009, Proposal Twenty Five, Modification 1.
In Proposal Twenty-Nine in the instant docket, the Postal Service recognizes that its current method for calculating an Auto/Mech factor for sorting flats when applied to FY 2009 data produces results that are unreasonably close to 100 percent. It ascribes this, in large part, to the growing volume of ``fletters,'' i.e., ``slim-jim'' sized letters. These are designed to take advantage of favorable letter rates. The Postal Service says that they are difficult to process on letter-sorting equipment, and, therefore, end up with increasing frequency being diverted to flat sorting equipment. It asserts that fletters raise the Total Piece Handling (TPH) counts of mail representing
Page 68557
incoming secondary sorts on automated or mechanized machines, as reflected in the MODS data reporting system, but they are not counted as flats in the RPW data reporting system. The Postal Service asserts that the absence of fletters in the RPW estimate of flat volume and the presence of fletters in the machine piece-handling counts leads to an inflated In-Plant Coverage Factor which inflates the Auto/Mech factor.
Proposal Twenty-Nine proposes adjustments to the Periodicals cost model that would reduce the Auto/Mech factor to a more realistic level.
Adopting suggestions made by the Commission in Docket No. RM2009-10, the Postal Service proposes to remove the number of carrier route flats from broken bundles from the MODS volume of flats that receive a mechanized incoming secondary sort.\7\ It also proposes to use mail processing costs to estimate the proportion of letter-sized pieces that are worked on those machines. This too would reduce the volume of mail that receive a mechanized incoming secondary sort on flat sorting equipment (recorded in MODS reports, but not the RPW) and thus reduce upward bias in the measurement of the Auto/Mech Factor. See Proposal
Twenty-Nine supporting material accompanying the Petition, at 3.
\7\ The In-Plant IS Coverage Factor is based upon the ratio of non-carrier route flats that receive a mechanized incoming secondary sort (in MODS data) and the volume of non-carrier route flats (in the RPW). Broken carrier route flats that receive a mechanized sort would be recorded in MODS volumes, but not RPW volumes, thereby producing an upward bias in the measurement of the In-Plant IS
Coverage Factor unless these broken carrier route flats are removed from the MODS measurement of the number of flats that receive a mechanized incoming secondary sort.
The hard-copy attachment to the Postal Service's Petition explains the proposal's background, objective and rationale. In the electronic attachment, the Postal Service provides a means for estimating the impact of adopting Proposal Twenty-Nine by itself, and for estimating its impact in conjunction with Proposal Twenty-Five in Docket No.
RM2010-4, in the event that Proposal Twenty-Five is adopted.
Comments on Proposal Twenty-Nine are due no later than December 29, 2009.
Pursuant to 39 U.S.C. 505, John Klingenberg is appointed to serve as the officer of the Commission (Public Representative) to represent the interests of the general public in this docket.
It is ordered: 1. The Petition of the United States Postal Service Requesting
Initiation of a Proceeding to Consider a Proposed Change in Analytic
Principles (Proposal Twenty-Nine), filed December 11, 2009, is granted. 2. The Commission establishes Docket No. RM2010-6 to consider the matters raised in the Postal Service's Petition. 3. Interested persons may submit comments on Proposal Twenty-Nineno later than December 29, 2009. 4. The Commission will determine the need for reply comments after review of the initial comments. 5. John Klingenberg is designated to serve as the Public
Representative representing the interests of the general public. 6. The Secretary shall arrange for publication of this notice in the Federal Register.
By the Commission.
Shoshana M. Grove,
Secretary.
FR Doc. E9-30477 Filed 12-23-09; 4:15 pm
BILLING CODE 7710-FW-S
