Pesticide registration, cancellation, etc.: Huntsman Advanced Materials, et al.,
[Federal Register: October 19, 2004 (Volume 69, Number 201)]
[Notices]
[Page 61489-61494]
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
[DOCID:fr19oc04-30]
ENVIRONMENTAL PROTECTION AGENCY
[OPPT-2004-0120; FRL-7685-2]
Certain New Chemicals; Receipt and Status Information
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from September 13, 2004 to October 1, 2004, consists of the PMNs, pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
DATES: Comments identified by the docket identification (ID) number OPPT-2004-0120 and the specific PMN number or TME number, must be received on or before November 18, 2004.
ADDRESSES: Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.
FOR FURTHER INFORMATION CONTACT: Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: (202) 554-1404; e-mail address: TSCA-Hotline@epa.gov.
SUPPLEMENTARY INFORMATION:
-
General Information
-
Does this Action Apply to Me?
This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.
-
How Can I Get Copies of this Document and Other Related Information?
-
Docket. EPA has established an official public docket for this action under docket ID number OPPT-2004-0120. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is (202) 566-1744 and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is (202) 566-0280.
-
Electronic access. You may access this Federal Register document electronically through the EPA Internet underthe ``Federal Register'' listings athttp://www.epa.gov/fedrgstr/.
An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/edocket/ to submit or view public
comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select ``search,'' then key in the appropriate docket ID number.
Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.
For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.
Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.
-
-
How and To Whom Do I Submit Comments?
You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment.
[[Page 61490]]
Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked ``late.'' EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.
-
Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.
i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/edocket/ , and follow the online instructions for submitting comments.
Once in the system, select ``search,'' and then key in docket ID number OPPT-2004-0120. The system is an ``anonymous access'' system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.
ii. E-mail. Comments may be sent by e-mail to oppt.ncic@epa.gov, Attention: Docket ID Number OPPT-2004-0120 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an ``anonymous access'' system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e- mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.
iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.
-
By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460- 0001.
-
By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-20040120 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is (202) 564-8930.
-
-
How Should I Submit CBI to the Agency?
Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT.
-
What Should I Consider as I Prepare My Comments for EPA?
You may find the following suggestions helpful for preparing your comments:
-
Explain your views as clearly as possible.
-
Describe any assumptions that you used.
-
Provide copies of any technical information and/or data you used that support your views.
-
If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.
-
Provide specific examples to illustrate your concerns.
-
Offer alternative ways to improve the notice or collection activity.
-
Make sure to submit your comments by the deadline in this document.
-
To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.
-
-
-
Why is EPA Taking this Action?
Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from September 13, 2004 to October 1, 2004, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
-
Receipt and Status Report for PMNs
This status report identifies the PMNs both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.
In Table I of this unit, EPA provides the following information (to the extent
[[Page 61491]]
that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.
-
81 Premanufacture Notices Received From: 09/10/04 to 10/01/04
Projected Notice End Case No.
Received Date
Date
Manufacturer/Importer
Use
Chemical
P-04-0895
09/13/04
12/11/04
Huntsman Advanced (S) Epoxy curing (G) Fatty acids, Materials
agent
C16 18 and C18- unsaturated, branched and linear, polymers with C18- unsaturated fatty acids dimers, and an amine P-04-0896
09/13/04
12/11/04
International flavors (S) Ingredient for (S) Oils, gardenia and fragrances, Inc. use in fragrances tahitensis for soaps, detergents, cleaners and other household products P-04-0897
09/13/04
12/11/04
Incorez Corporation (S) Polyurethane (S) 1,4-butanediol, resin coating
polymer with 5- isocyanato-1- (isocyanatomethyl)- 1,3,3- trimethylcyclohexane and .alpha.,.alpha.',.al pha.''-1,2,3- propanetriyltris[.om ega.- hydroxypoly[oxy(meth yl-1,2-ethanediyl]]] P-04-0898
09/13/04
12/11/04
Bedoukian Research, (S) Chemical
(G) Di-substituted Inc.
intermediate
acyclic carboxylic acid, ethyl ester P-04-0901
09/13/04
12/11/04
Gharda Chemical Ltd. (S) Molding and
(G) Polysulfone extrusion;
copolymer compounding P-04-0902
09/13/04
12/11/04
Huntsman Advanced (S) Epoxy curing (G) Fattys acids, Materials
agent
C16 18 and C18- unsaturated, branched and linear, polymers with C18- unsaturated fatty acid dimers, triethylenetetramine and an amine P-04-0903
09/13/04
12/11/04
CBI
(G) Fiberglass film (G) Allylether former
functional unsaturated polyester P-04-0904
09/15/04
12/13/04
Firmenich, Inc.
(S) Aroma chemical (S) Spiro[5.5.]undec- for use in fragrance 8-en-1-one, 2,2,7,9- mixtures, that in tetramethyl- turn are used in perfumes, soaps, cleaners, etc. P-04-0905
09/15/04
12/13/04
CBI
(G) Viscosity
(G) Polymer of vinyl modifier
heterocycle P-04-0906
09/15/04
12/13/04
CBI
(G) Electronics
(G) Silicone adhesive
anhydride P-04-0907
09/15/04
12/13/04
CBI
(G) Electronics
(G) Silicone adhesive
anhydride P-04-0908
09/17/04
12/15/04
Octel Starreon LLC (G) Destructive use. (G) Polyolefin esters pmn chemical is destroyed when fuel is burned. P-04-0909
09/16/04
12/14/04
NA Industries, Inc. (S) Ultra violet (S) 2-propenoic acid, curable monomer for 2-[2- polymerization
(ethenyloxy)ethoxy]e thyl ester P-04-0910
09/16/04
12/14/04
Cognis Corporation (S) Synthetic
(S) Fatty acids, lubricant
C8 10, mixed triesters with coco fatty acids and trimethylolpropane P-04-0911
09/20/04
12/18/04
Basell USA Inc.
(G) Catalyst system (G) Aryl-substituted component
diether propane P-04-0912
09/20/04
12/18/04
CBI
(G) A raw material (G) Poly phenylene for electronic
ether derivative materials P-04-0913
09/20/04
12/18/04
Dow Corning
(G) Intermediate for (G) Silsesquioxanes Corporation
paint additive P-04-0914
09/20/04
12/18/04
CBI
(G) Reactant in
(G) Amino polyether thermoset coating or prepolymer ester adhesive formulation; degree of containment --- (c) open, non- dispersive use P-04-0915
09/20/04
12/18/04
CBI
(G) Polymeric binder (G) Styrene- methacrylate copolymer P-04-0916
09/20/04
12/18/04
CBI
(G) Polymeric binder (G) Styrene- methacrylate copolymer P-04-0917
09/20/04
12/18/04
CBI
(G) Polymeric binder (G) Styrene- methacrylate copolymer P-04-0918
09/16/04
12/14/04
CBI
(G) Lubricant
(G) Alkaryl sulfonic additive
acid, metal salts P-04-0919
09/16/04
12/14/04
CBI
(G) Lubricant
(G) Alkaryl sulfonic additive
acid, metal salts P-04-0920
09/16/04
12/14/04
CBI
(G) Lubricant
(G) Alkaryl sulfonic additive
acid, metal salts P-04-0921
09/16/04
12/14/04
CBI
(G) Lubricant
(G) Alkaryl sulfonic additive
acid, metal salts P-04-0922
09/16/04
12/14/04
CBI
(G) Lubricant
(G) Alkaryl sulfonic additive
acid, metal salts P-04-0923
09/16/04
12/14/04
CBI
(G) Intermediate (G) Alkaryl sulfonic acid P-04-0924
09/16/04
12/14/04
CBI
(G) Intermediate (G) Alkaryl sulfonic acid P-04-0925
09/16/04
12/14/04
CBI
(G) Intermediate (G) Alkaryl sulfonic acid P-04-0926
09/16/04
12/14/04
CBI
(G) Intermediate (G) Alkaryl sulfonic acid P-04-0927
09/16/04
12/14/04
CBI
(G) Intermediate (G) Alkaryl sulfonic acid P-04-0928
09/16/04
12/14/04
CBI
(G) Intermediate (G) Toluene alkylate P-04-0929
09/16/04
12/14/04
CBI
(G) Intermediate (G) Toluene alkylate P-04-0930
09/16/04
12/14/04
CBI
(G) Intermediate (G) Toluene alkylate P-04-0931
09/16/04
12/14/04
CBI
(G) Intermediate (G) Toluene alkylate
[[Page 61492]]
P-04-0932
09/16/04
12/14/04
CBI
(G) Intermediate (G) Toluene alkylate P-04-0933
09/20/04
12/18/04
Nyco Minerals, Inc. (S) Filler for
(S) Silane, silicone rubber
ethenyltriethoxy-, reaction products with wollastonite (ca(sio3)) P-04-0934
09/20/04
12/18/04
Nyco Minerals, Inc. (S) Filler for
(S) 2-propenoic acid, polyester resins; 2-methyl-, 3- filler for coatings (trimethoxysilyl)pro pyl ester, reaction products with wollastonite (ca(sio3)) P-04-0935
09/20/04
12/18/04
Nyco Minerals, Inc. (S) Filler for
(S) Silane, coatings; filler for trimethoxy [3- epoxy resins
(oxiranylmethoxy)pro pyl]-, reaction products with wollastonite (ca(sio3)) P-04-0936
09/20/04
12/18/04
Nyco Minerals, Inc. (S) Filler for epoxy (S) Silane, (3- resins
chloropropyl)trimeth oxy-, reaction products with wollastonite (ca(sio3)) P-04-0937
09/20/04
12/18/04
Dow Corning
(G) Paint additive (G) Silsesquioxanes Corporation P-04-0938
09/21/04
12/19/04
CBI
(G) Asphalt additive (G) Alkyl diamine P-04-0939
09/21/04
12/19/04
Wacker Silicones a (S) Additive for (G) Polysiloxane, Division of Wacker plastics and rubbers aminoalkyl Chemical Corporation
terminated polymers with urea functionality alkylbenzene P-04-0940
09/21/04
12/19/04
CBI
(G) Asphalt additive (G) Alkyl amine nitrile P-04-0941
09/21/04
12/19/04
Aldrich Chemical (S) Chemical
(S) Silane, Company, Inc.
intermediate,
dichlorobis(1,1- destructive use
dimethylpropoxy)- P-04-0942
09/22/04
12/20/04
Ashland Inc.,
(G) Adhesive,
(G) Multifunctional Environmental Health coating, ink
acrylate oligomer and Safety
resin P-04-0943
09/22/04
12/20/04
Ashland Inc.,
(G) Adhesive,
(G) Multifunctional Environmental Health coating, ink
acrylate oligomer and Safety
resin P-04-0944
09/22/04
12/20/04
Ashland Inc.,
(G) Adhesive,
(G) Multifunctional Environmental Health coating, ink
acrylate oligomer and Safety
resin P-04-0945
09/22/04
12/20/04
Ashland Inc.,
(G) Adhesive,
(G) Multifunctional Environmental Health coating, ink
acrylate oligomer and Safety
resin P-04-0946
09/22/04
12/20/04
Ashland Inc.,
(G) Adhesive,
(G) Multifunctional Environmental Health coating, ink
acrylate oligomer and Safety
resin P-04-0947
09/22/04
12/20/04
Ashland Inc.,
(G) Adhesive,
(G) Multifunctional Environmental Health coating, ink
acrylate oligomer and Safety
resin P-04-0948
09/23/04
12/21/04
CBI
(G) Polymer is
(G) Siloxane coating applied as a functional coating over inorganic solids. P-04-0949
09/23/04
12/21/04
3M Company
(G) Chemical
(G) Organic acids intermediate for aluminum complexes inorganic fibers. P-04-0950
09/23/04
12/21/04
CIBA Specialty
(S) Exhaust
(G) Reaction product Chemicals
application to
of substituted Corporation, Textile cotton fabrics
naphthalenesulfonic Effects
acid azo substituted phenyl amino substituted triazine compound and substituted phenyl azo substituted naphthalenesulfonic acid P-04-0951
09/23/04
12/21/04
CBI
(S) Intermediate (G) N-arylsubstituted phthalimide P-04-0952
09/21/04
12/19/04
Kelmar Industries, (S) Textile softener (G) Inc.
Polydimethylsiloxane with aminoalkyl and polyether groups P-04-0953
09/23/04
12/21/04
CBI
(S) Liquid crystal (G) Substituted polymer
polyester P-04-0954
09/24/04
12/22/04
Surface Specialties, (S) Wetting agent for (G) Substituted fatty Inc.
solvent based paint acid P-04-0955
09/24/04
12/22/04
Kelmar Industries, (S) Textile softener (G) Inc.
Polydimethylsiloxane with aminoalkyl and polyether groups P-04-0956
09/23/04
12/21/04
CBI
(S) Curing agent for (G) Mixture of epoxy coating
ketimines by systems
reaction of amines with methyl isobutyl ketone P-04-0957
09/24/04
12/22/04
Essential Industries (S) Acrylic floor (S) 2-propenoic acid, finish
2-methyl-, polymer with butyl 2- propenoate, ethenylbenzene, methyl 2-methyl-2- propenoate and 2- methylpropyl 2- methyl-2-propenoate
[[Page 61493]]
P-04-0958
09/24/04
12/22/04
Essential Industries (S) Acrylic floor (S) 2-propenoic acid, finish
2-methyl-, polymer with butyl 2- propenoate, ethenylbenzene, methyl-2-methyl-2- propenoate and 2- methylpropyl 2- methyl-2-propenoate, ammonium salt P-04-0959
09/27/04
12/25/04
Surface Specialties, (S) Hardener for (G) Epoxide-amine Inc.
water-thinnable
adduct paints P-04-0960
09/28/04
12/26/04
CBI
(G) Ink
(G) Biphenyl-bis(azo- acetoaceto-benzoate) P-04-0961
09/29/04
12/27/04
CBI
(G) This material is (G) Arylalkyl used to help recover sulfonic acid additional quantities of oil from subterranean reservoirs and also to impart improved properties to products derived from such recovered oil. P-04-0962
09/29/04
12/27/04
CBI
(G) This material is (G) Arylalkyl used to help recover sulfonic acid additional quantities of oil from subterranean reservoirs and also to impart improved properties to products derived from such recovered oil. P-04-0963
09/30/04
12/28/04
Nippon Gohsei
(G) Ultra violet (G) (U.S.A.) Co. Ltd. irradiation
Polyurethaneacrylate hardening adhesive P-05-0001
10/01/04
12/29/04
CBI
(S) Curing agent for (G) Polyamine mannich epoxy coating
base systems P-05-0002
10/01/04
12/29/04
CBI
(G) Chemical
(G) Methyl cyano intermediate
amino ethyl ether P-05-0003
10/01/04
12/29/04
CBI
(S) Crosslinking (G) Mixed alkyl agent for automotive urethane of melamine coatings
triisocyanate P-05-0004
10/01/04
12/29/04
CBI
(S) Crosslinking (G) Trialkyl urethane agent for automotive of melamine coatings
triisocyanate P-05-0005
10/01/04
12/29/04
CBI
(S) Crosslinking (G) Mixed alkyl agent for automotive urethane of melamine coatings
triisocyanate P-05-0006
10/01/04
12/29/04
CBI
(S) Crosslinking (G) Trialkyl urethane agent for automotive of melamine coatings
triisocyanate P-05-0007
10/01/04
12/29/04
CBI
(S) Crosslinking (G) Trialkyl urethane agent for automotive of melamine coatings
triisocyanate P-05-0008
10/01/04
12/29/04
CBI
(S) Crosslinking (G) Trialkyl urethane agent for automotive of melamine coatings
triisocyanate P-05-0009
10/01/04
12/29/04
Heico Chemicals
(G) Surfactant
(S) Butanedioic acid, 2-octenyl- P-05-0010
10/01/04
12/29/04
CBI
(G) Catalyst used to (G) Trimethyl bis facilitate the
alkylamine bis formation of
(aminoethyl) ether cellular structure in the production of polyurethane foam. P-05-0011
10/01/04
12/29/04
Clariant Corporation (S) Flame retardant (S) Phosphinic acid, for polyamide
diethyl-, zinc salt thermoplastic epoxy resins P-05-0015
10/01/04
12/29/04
CBI
(G) Resin for
(G) Modified acrylic coatings
resin P-05-0016
10/01/04
12/29/04
CBI
(G) Resin for
(G) Modified acrylic coatings
resin P-05-0017
10/01/04
12/29/04
CBI
(G) Resin for
(G) Modified acrylic coatings
resin
In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:
-
16 Notices of Commencement From: 09/13/04 to 10/01/04
Commencement Notice Case No.
Received Date
End Date
Chemical
P-01-0480
09/21/04
08/19/04
(S) Propanol, [(1-methyl- 1,2- ethanediyl)bis(oxy)bis-, polymer with 1,1,'- methylenebis[isocyanatobe nzene], oxybis[propanol] and alpha,alpha',alpha''- 1,2,3- propanetriyltris[omega- hydroxypoly[oxy(methyl- 1,2-ethanediyl)]] P-02-0230
09/24/04
09/03/04
(G) Acrylic resin P-02-0319
09/22/04
08/24/04
(G) Imine modified polyamide P-03-0701
09/21/04
09/15/04
(G) Methylene bicycloalkane P-04-0050
09/16/04
08/16/04
(G) Polyurethane P-04-0070
09/20/04
09/02/04
(G) Polyether fatty acid ester P-04-0095
09/22/04
08/14/04
(G) Polyurethane dispersion
[[Page 61494]]
P-04-0163
09/15/04
08/04/04
(G) Amine prepolymer P-04-0452
09/21/04
08/30/04
(G) Benzoic acid, 2-[3-oxo- 6-(phenylmethoxy)-2,7- dipropyl-3h- heteropolycycle-9-yl]-, phenylmethyl ester P-04-0453
09/21/04
08/19/04
(G) Spiro[isobenzofuran- 1(3h),9'- [9h]heteropolycycle]-3- one, 3',6'-dihydroxy- 2',7'-dipropyl- P-04-0454
09/21/04
09/03/04
(G) Spiro[isobenzofuran- 1(3h),9'- [9h]heteropolycycle]-3- one, 3',-hydroxy-6'- (phenylmethoxy)-2',7'- dipropyl- P-04-0471
09/21/04
08/18/04
(G) Modified polyester resin P-04-0472
09/21/04
08/18/04
(G) Modified polyester resin P-04-0549
09/20/04
08/25/04
(G) Poly(methacrylic acid) salt in water P-04-0550
09/20/04
08/17/04
(G) Polyglycolether- polycarboxylate P-04-0622
09/21/04
09/15/04
(G) Alkyl 2-alkanoate
List of Subjects
Environmental protection, Chemicals, Premanufacturer notices.
Dated: October 13, 2004. Anthony Cheatham, Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.
[FR Doc. 04-23398 Filed 10-18-04; 8:45 am]
BILLING CODE 6560-50-S
