Standards for Business Practices and Communication Protocols for Public Utilities
Federal Register: April 22, 2010 (Volume 75, Number 77)
Rules and Regulations
Page 20901-20909
From the Federal Register Online via GPO Access [wais.access.gpo.gov]
DOCID:fr22ap10-2
DEPARTMENT OF ENERGY
Federal Energy Regulatory Commission 18 CFR Part 38
Docket No. RM05-5-017; Order No. 676-F
Standards for Business Practices and Communication Protocols for
Public Utilities
Issued April 15, 2010.
AGENCY: Federal Energy Regulatory Commission.
ACTION: Final rule.
SUMMARY: The Federal Energy Regulatory Commission (Commission) is amending its regulations at 18 CFR 38.2 to incorporate by reference business practice standards adopted by the Wholesale Electric Quadrant of the North American Energy Standards Board (NAESB) to categorize various demand response products and services and to support the measurement and verification of these products and services in wholesale electric energy markets. This rule ensures that participants in wholesale energy markets where demand response products are administered receive standardized access to information that will enable them to participate in those markets and addresses performance evaluation methods appropriate to use for demand response products.
This rule facilitates the ability of demand response providers to participate in electricity markets, reducing transaction costs and providing an opportunity for more customers to participate in these programs, especially customers that operate in more than one organized market. It also provides a foundation for further business practice standardization efforts, and participants in the NAESB process can use these standards to identify those elements for which standardization would be beneficial. Further, adoption of measurement and verification standards will improve the methods and procedures for measuring accurately the performance of demand response resources and assist in monitoring demand response services for potential manipulation.
DATES: Effective Date: This rule will become effective May 24, 2010.
Dates for implementation of the standards are provided in the Final
Rule. This incorporation by reference of certain publications in the rule is approved by the Director of the Federal Register as of May 24, 2010.
FOR FURTHER INFORMATION CONTACT: Ryan Irwin (technical issues), Office of Energy Policy and Innovation, Federal Energy Regulatory Commission, 888 First Street, NE., Washington, DC 20426, (202) 502-6454.
Gary D. Cohen (legal issues), Office of the General Counsel,
Federal Energy Regulatory Commission, 888 First Street, NE.,
Washington, DC 20426, (202) 502-8321.
SUPPLEMENTARY INFORMATION:
Table of Contents
Paragraph
Nos.
-
Background...............................................
3.
-
Discussion..............................................
9.
-
Overview.............................................
9.
-
NAESB Phase I M&V Standards..........................
15. 1. Adoption of NAESB Phase I M&V Standards..........
15. 2. Clarification of Jurisdictional Concerns.........
17.
Page 20902
3. Nomenclature.....................................
21.
-
Phase II M&V Standards...............................
24. 1. Proper Organization(s) To Develop Phase II M&V
24.
Standards.......................................... 2. Guidance on the Scope of the Phase II M&V
29.
Standards.......................................... 3. Suggested Improvements to Standards..............
35. 4. Deadline for Phase II M&V Standards Development..
38.
-
Incorporation by Reference...........................
42.
-
-
Implementation Dates and Procedures....................
43.
-
Notice of Use of Voluntary Consensus Standards..........
47.
-
Information Collection Statement.........................
48.
-
Environmental Analysis..................................
54.
-
Regulatory Flexibility Act.............................
55.
-
Document Availability.................................
58.
-
Effective Date and Congressional Notification...........
61.
Before Commissioners: Jon Wellinghoff, Chairman; Marc Spitzer, Philip
-
Moeller, and John R. Norris.
Final Rule 1. The Federal Energy Regulatory Commission (Commission) is amending its regulations at 18 CFR 38.2(a) (which establish standards for business practices and electronic communications for public utilities)\1\ to incorporate by reference business practice standards adopted by the Wholesale Electric Quadrant (WEQ) of the North American
Energy Standards Board (NAESB) to categorize various demand response products and services and to support the measurement and verification of these products and services in wholesale electric energy markets. We also take this opportunity to update 18 CFR 38.2(b) to reflect NAESB's new address.
\1\ 18 CFR 38.2(a).
2. These standards identify operational information about demand response products that system operators need to make available to participants in markets where such products are offered and address performance evaluation methods appropriate to use for demand response products. They also facilitate the ability of demand response providers to participate in electricity markets, reducing transaction costs and providing an opportunity for more customers to participate in these programs, especially customers that operate in more than one organized market. In addition, these standards provide a foundation for further business practice standardization efforts, which participants in
NAESB's WEQ process can use to identify those elements for which standardization would be beneficial. Further, adoption of measurement and verification standards will improve the methods and procedures for measuring accurately the performance of demand response resources and assist in monitoring demand response services for potential manipulation.
-
-
Background 3. NAESB is a private consensus standards developer that divides its activities among four quadrants, each of which is composed of members from all segments of its respective industry.\2\ NAESB is an accredited standards organization under the auspices of the American
National Standards Institute (ANSI). NAESB's procedures are designed to ensure that all industry members can have input into the development of a standard, whether or not they are members of NAESB, and each wholesale electric standard that NAESB's WEQ adopts is supported by a consensus of the seven industry segments: End Users, Distribution/Load
Serving Entities, Transmission, Generation, Marketers/Brokers,
Independent Grid Operators/Planners and Technology/Services. Under the
WEQ process, for a standard to be approved, it must receive a super- majority vote of 67 percent of the members of the WEQ's Executive
Committee with support from at least 40 percent of each of the seven industry segments.\3\ For final approval, 67 percent of the WEQ's general membership must ratify the standards.\4\ NAESB's standards are voluntary. However, the Commission has made compliance with these standards mandatory in those instances where it has incorporated such standards by reference into its regulations.
\2\ The four quadrants are the wholesale and retail electric quadrants and the wholesale and retail natural gas quadrants.
\3\ Under NAESB's procedures, interested persons may attend and participate in NAESB committee meetings, and phone conferences, even if they are not NAESB members.
\4\ See Standards for Business Practices and Communication
Protocols for Public Utilities, Order No. 676, FERC Stats. & Regs. ] 31,216, n.5 (2006), reh'g denied, Order No. 676-A, 116 FERC ] 61,255
(2006).
4. In 2006, the Commission adopted Order No. 676, a Final Rule that incorporated by reference business practice standards adopted by NAESB applicable to public utilities.\5\ Since 2006, the NAESB consensus industry stakeholder process has reviewed the NAESB business practice standards for public utilities with a view to creating a more efficient marketplace and it has adopted revisions that, in a number of instances, the Commission has made mandatory by incorporating the standards by reference into the Commission's regulations.\6\
\5\ Id.
\6\ Standards for Business Practices and Communication Protocols for Public Utilities, Order No. 676-E, Final Rule, 74 FR 63288 (Dec. 3, 2009), FERC Stats. & Regs. ] 31,299 (2009), Order No. 676-D, order granting clarification and denying reh'g, 124 FERC ] 61,317
(2008), Order No. 676-C, Final Rule, FERC Stats. & Regs. ] 31,274
(2008), Order No. 676-B, Final Rule, FERC Stats. & Regs. ] 31,246
(2007).
5. NAESB began work on the development of business practice standards pertaining to the measurement and verification of demand response products and services in July 2007, when the NAESB WEQ Demand
Side Management--Energy Efficiency (DSM) subcommittee began work on this issue. This effort led to the adoption and ratification by NAESB of measurement and verification standards early in 2009. Key to obtaining consensus on the initial set of standards was the agreement to proceed with further work on more detailed technical standards for the measurement and verification of demand response resources. 6. On April 17, 2009, NAESB filed a report informing the Commission that it had adopted an initial set of business practice standards to categorize various demand response products and services and to support the measurement and verification of these products and services in wholesale electric energy markets. The NAESB report recognized
Page 20903
that these standards would need to be followed by the development of more detailed technical standards for the measurement and verification of demand response products and services in independent system operator/regional transmission organization (ISO/RTO) footprint areas. 7. After a review of NAESB's April 2009 Report, the Commission issued a notice of proposed rulemaking on September 17, 2009 that proposed to amend the Commission's regulations at 18 CFR 38.2 to incorporate by reference the consensus standards adopted by NAESB's WEQ on March 16, 2009 (NAESB Phase I M&V Standards).\7\ NAESB has initiated specific plans to improve and adopt additional technical standards
(Phase II M&V Standards).\8\ In the Phase I M&V NOPR, the Commission specifically requested comments on whether the Commission should establish a deadline for the development of these remaining critical standards and, if so, what that deadline should be.
\7\ Standards for Business Practices and Communication Protocols for Public Utilities, Notice of Proposed Rulemaking, 74 FR 48173
(Sep. 22, 2009), FERC Stats. & Regs. ] 32,646 (2009) (Phase I M&V
NOPR).
\8\ Item 4a of NAESB's 2010 Annual Plan calls for the WEQ to review the NAESB Business Practices for Measurement and Verification of Wholesale Electricity Demand Response (WEQ-015) in conjunction with the Demand Response Matrix developed by the ISO/RTO Council and to identify business practice requirements that could be improved or made clearer through the addition of specific technical detail. The
ISO/RTO Council's 2009 ``North American Wholesale Electricity Demand
Response Program Comparison'' may be viewed at the ISO/RTO Council's
Web site at http://www.isorto.org. The Annual Plan provides that wholesale and retail demand response work groups and the Smart Grid task force should actively and timely communicate and coordinate work products to ensure consistency among the three work groups. The
Annual Plan further provides that each work group should take into account the work products developed by the other groups.
Item 4b of NAESB's 2010 Annual Plan calls for the WEQ, using the
ISO/RTO Council's matrix as a starting point, to review each performance evaluation type/service type combination identified in
WEQ-015 to assess and determine what standards or guidelines, if any, should be developed to aid all participants in the use of measurement and verification methods for demand response programs in organized wholesale electric markets. If the determination is made that standards or guidelines will be developed, those items will be added as sub-items to 4(b).
Item 4c of NAESB's 2010 Annual Plan calls for the WEQ to develop a glossary of terms used in demand response business practice standards.
Item 4d of NAESB's 2010 Annual Plan calls for the WEQ to develop business practice standards to measure and verify energy reductions that are made to comply with a Renewable Portfolio Standard that includes energy efficiency or a stand-alone Energy Efficiency
Portfolio Standard as part of an overall effort to measure and verify reductions in energy and demand from energy efficiency in wholesale and retail markets.
8. In response to the Phase I M&V NOPR, comments were filed by 19 entities.\9\
\9\ The entities that filed comments and the abbreviations used in this Final Rule to identify these entities are listed in Appendix
A.
-
Discussion
-
Overview 9. In this Final Rule, the Commission is revising its regulations at 18 CFR 38.2 to incorporate by reference the NAESB Phase I M&V
Standards. The new standards will facilitate development of standardized business practices for measuring and verifying demand resource products and services for the wholesale electric market. In addition, they will help create a framework for a more seamless electronic marketplace by providing consistent terms and definitions that can be used in electronic protocols across both the wholesale and retail electric markets. Further, adoption of measurement and verification standards will improve the methods and procedures for measuring accurately the performance of demand response resources and assist in monitoring demand response services for potential manipulation. 10. The NAESB Phase I M&V Standards were approved by the WEQ and ratified by the NAESB membership under NAESB's consensus procedures.\10\ As the Commission found in Order No. 587,\11\ adoption of consensus standards is appropriate because the consensus process helps ensure the reasonableness of the standards by requiring that the standards draw support from a broad spectrum of industry participants representing all segments of the industry. Moreover, since the industry itself has to conduct business under these standards, the Commission's regulations should reflect those standards that have the widest possible support. In section 12(d) of the National Technology Transfer and Advancement Act of 1995 (NTT&AA), Congress affirmatively requires federal agencies to use technical standards developed by voluntary consensus standards organizations, like NAESB, as a means to carry out policy objectives or activities determined by the agencies unless use of such standards would be inconsistent with applicable law or otherwise impractical.\12\
\10\ This process first requires a super-majority vote of 67 percent of the members of the WEQ's Executive Committee with support from at least 40 percent of each of the seven industry segments, which are enumerated in P 3, supra. For final approval, 67 percent of the WEQ's general membership voting must ratify the standards.
\11\ Standards for Business Practices of Interstate Natural Gas
Pipelines, Order No. 587, 61 FR 39053 (July 26, 1996), FERC Stats. &
Regs., ] 31,038 (1996).
\12\ Pub. L. 104-113, Sec. 12(d), 110 Stat. 775 (1996), 15
U.S.C. Sec. 272 note (1997). This requirement is further discussed at P 48, infra.
11. The specific NAESB standards that we are incorporating by reference in this Final Rule are business practices for Measurement and
Verification of Wholesale Electricity Demand Response. The standards have three sections; the first section (Introduction and Definition of
Terms) contains an overview of the standards and definitions, the second section (Standards 015-1.0 through 015-1.15) contains standards on Provision of Wholesale Electric Demand Response Energy, Capacity,
Reserve and Regulation Products, and the third section (Standards 015- 1.16 through 015-1.30) contains standards on the five performance evaluation methodologies: (1) Maximum Base Load; (2) Meter Before/Meter
After; (3) Baseline Type-I (Interval Meter); (4) Baseline Type-II (Non-
Interval Meter); and (5) Metering Generator Output. 12. The NAESB Phase I M&V Standards also provide a foundation for further business practice standardization efforts, and participants in the WEQ process can use these standards to identify those elements for which standardization would be beneficial. We believe that development of the Phase II M&V Standards to which NAESB has committed will help improve the methods and procedures for measuring accurately the performance of demand responders. Such standards also will facilitate the ability of demand response providers to participate in electricity markets, in particular customers and aggregators that may participate in multiple markets. Standards for measuring and verifying demand response can help these customers reduce the transaction costs of participating in these markets. 13. Because of the importance of moving forward on the development and adoption of the Phase II M&V Standards, we urge NAESB to complete its development of these standards within one year, as discussed below.
If NAESB is unable to meet this goal, we request that it file with the
Commission within one year, a report of the progress it has made, as well as the areas in which consensus has not been reached. 14. We address below the issues raised by the commenters.
Page 20904
-
NAESB Phase I M&V Standards 1. Adoption of NAESB Phase I M&V Standards a. Comments 15. Nearly all the commenters support the proposal to incorporate the NAESB Phase I M&V Standards by reference. California Commission,
Comverge, EEI, EnerNOC, EPSA, Indiana Commission, ISO/RTO Council,
NARUC, NRECA, Public Interest Orgs, SDG&E, TVA and Westar all express support for the proposal. For example, EnerNOC asserts the NAESB Phase
I M&V Standards address a need within the industry to develop consistent measurement and verification (M&V) practices across the country. While NRECA and Indiana Commission raised concerns about the costs of obtaining NAESB standards, addressed below, they did not oppose the incorporation by reference of the NAESB Phase I M&V
Standards. b. Commission Determination 16. The Commission is revising its regulations at 18 CFR 38.2 to incorporate by reference the NAESB Phase I M&V Standards. The new standards define terms and definitions that can be used to facilitate communications and provide standards for measurement and verification methodologies for demand resources in wholesale electric markets. 2. Clarification of Jurisdictional Concerns 17. As we explained in the Phase I M&V NOPR, the NAESB Phase I M&V
Standards will enhance transparency and consistency in the methodology used to measure and verify demand response products in wholesale markets administered by the ISOs and RTOs.\13\
\13\ Phase I M&V NOPR at P 10.
-
Comments 18. FirstEnergy, the California Commission and NARUC all caution that these standards are only applicable in the wholesale energy market and that the states have jurisdiction over retail demand response programs, meters and infrastructure. 19. FirstEnergy argues that the Commission's involvement in demand response activities must continue to acknowledge that the states have jurisdiction in retail markets. Similarly, NARUC states that the
Commission should continue to work closely with the states to outline jurisdictional boundaries with respect to the standards being proposed in the NAESB process. b. Commission Determination 20. We agree with the commenters that the NAESB Phase I M&V
Standards that we are incorporating by reference in this Final Rule are applicable to wholesale energy markets under the Commission's jurisdiction and nothing in this Final Rule is intended to interfere with the states' jurisdiction over retail demand response programs. 3. Nomenclature 21. The NAESB Phase I M&V Standards include 40 definitions. These definitions ``identify basic product categories, i.e., energy service, capacity service, reserve service and regulation service. They identify the measurement and verification characteristics of demand response products and services offered in organized wholesale electricity markets, such as reduction deadlines, advance notification instructions, telemetry accuracy, and communication protocols.'' \14\
\14\ Id. at P 6.
-
Comments 22. ELCON suggests in several instances that the definition included in the NAESB Phase I M&V Standards should be revised to add more specificity. For example, it would add further operating characteristics to the definitions of Normal Operations, Recovery
Period and Demand Resource Availability Measurement.\15\ Additionally,
ELCON suggests several edits and clarifications to these same terms and to the definition of Triggering Events and Telemetry.\16\ EPSA, likewise, asserts the standards in their current form do not provide enough detail to ensure demand response resources receive comparable treatment to those of other resources.\17\
\15\ ELCON Comments at 4-7.
\16\ Id. at 5.
\17\ EPSA Comments at 4.
-
Commission Determination 23. We find the definitions included in the NAESB Phase I M&V
Standards adequate for the purposes of Phase I and we will incorporate them by reference as proposed in the Phase I M&V NOPR. Also, as we noted above, item 4c of the WGQ 2010 Action Plan is devoted to the formulation of a glossary of demand response terminology. ELCON and
EPSA may pursue their concerns about the need for greater specificity in the definition of demand response terms by continuing their participation in the NAESB process.
-
-
Phase II M&V Standards 1. Proper Organization(s) to Develop Phase II M&V Standards a. Comments 24. Nearly all the comments support NAESB as the proper organization to develop the Phase II M&V Standards.\18\ For example,
ISO/RTO Council asserts the NAESB process has been an effective way to bring demand response organizations together to create the NAESB Phase
I M&V Standards. Comverge commends the efforts of NAESB to develop this initial set of standards. EPSA also supports the NAESB process and notes the ANSI-certified consensus-based approach is an effective means to craft standards. Comverge expresses appreciation to NAESB for its efforts and is supportive of its efforts that ensure increased demand response participation.
\18\ See supporting comments on this subject by Comverge,
Curtailment Specialists, EEI, EPSA, ISO/RTO Council, NARUC and
Westar. FirstEnergy also supports these efforts, although it cautions that we need to keep jurisdictional concerns in mind. See discussion at P 18-19, supra. TVA also stresses the need for the proper coordination of efforts. See P 39, infra. The objections of
Industrial Coalitions on its preference for the Commission developing all standards are discussed in P 42, infra.
25. By contrast, Duke is the sole commenter raising an objection to the continuing role of NAESB in developing the Phase II M&V Standards.
Duke contends that the ISOs and RTOs are in a better position to develop these standards, due to regional differences. b. Commission Determination 26. In our view, NAESB is best suited to develop these common Phase
II M&V Standards. The NAESB DSM subcommittee has the membership and participation of demand response providers, ISOs, RTOs, public utilities and trade groups. 27. The continued cooperation and efforts of all these participants in the NAESB Phase II M&V Standards process will create an environment conducive to creating transparent and consistent standards for the measurement and verification of demand response resources offered into wholesale electricity markets. Furthermore, the efforts of a single group sponsored by NAESB will allow for more efficient participation in the standards development process and will help provide greater consistency than might be possible from the individual efforts sponsored by six separate regional organizations. 28. Improvement in measurement and verification standards will work to ensure that the performance of demand
Page 20905
response resources can be accurately quantified. Standardization of measurement and verification methods also will help to reduce costs for customers participating in multiple markets. Without consistent standards, customers and demand response providers that participate in more than one RTO or ISO would then have to incur the costs of developing different business processes to adapt to the differing RTO/
ISO requirements, increasing the cost and complexity of their business.
Furthermore, the Phase II M&V Standards should help achieve greater efficiency in the operation and evaluation of the performance of demand response products and services. 2. Guidance on the Scope of the Phase II M&V Standards a. Comments 29. Many of the commenters find that NAESB's development of Phase
II M&V Standards and the Commission's incorporation by reference of such standards will have the benefit of creating additional consistency and standardization across markets. These same commenters also noted the benefits to adoption of a common terminology for M&V methods. For example, Public Interest Orgs supports the standardization of M&V business rules and asserts that such standardization will increase participation, eliminate gaming opportunities and enable aggregators to overcome varying business practices. EPSA also finds benefit in the
Commission acting to reduce needless and costly disparities among the
ISOs and RTOs, but is concerned that the standards provide too much deference to ISO/RTO policies and that this will hinder efforts to standardize demand response rules. ELCON does not object to the role of
NAESB in developing the Phase II M&V Standards, but finds that the process needs improvement in Phase II so that the concerns of demand response providers are given more consideration and the views of ISOs and RTOs are given less deference.\19\
\19\ ELCON Comments at 3.
30. SDG&E supports the adoption of standards that promote transparency and consistency across markets. SDG&E further states that adopting consistent standards across ISOs and RTOs could reduce barriers to demand response providers who operate in multiple markets.
Industrial Coalitions states the standardization of demand response practices across power markets will improve their business objectives.\20\ Comverge supports Phase II M&V Standards that would simplify baseline approaches and expand the deployment of demand response. ISO/RTO Council notes approvingly that the use of common terminology has accelerated the development of retail standards as well as supported development of other demand response initiatives. TVA states that NAESB's Phase II M&V Standards efforts should concentrate on the measurement and verification of demand response.
\20\ Industrial Coalitions members include: Coalition of Midwest
Transmission Customers; NEPOOL Industrial Customer Coalition; and
PJM Industrial Customer Coalition.
31. Both Duke and FirstEnergy request guidance as to the content of the Phase II M&V Standards and what information is needed to facilitate and promote demand response in markets. b. Commission Determination 32. While NAESB's Phase I M&V Standards represent a good first step, additional substantive standards would appear beneficial in creating transparent and consistent measurement and verification of demand response products and services in wholesale electric markets.
The measurement and verification standards needed to accomplish this goal should be a focus of NAESB's Phase II M&V Standards development efforts. 33. While the development of the Phase II M&V Standards should be an industry-driven consensus-seeking process, we agree with commenters that more detailed measurement and verification standards will reduce costs for customers and market participants, particularly those participating in multiple markets. As discussed earlier, demand response providers that participate in more than one RTO or ISO should not have to incur the costs of developing different business processes to adapt to the differing RTO/ISO requirements, increasing the cost and complexity of their business. 34. In response to Duke's and FirstEnergy's requests for additional guidance as to the content of the Phase II M&V Standards, we agree with
NAESB's plan to start the process by reviewing the elements of the performance evaluation methods detailed in the ISO/RTO Council's demand response program matrix. While we do not expect NAESB to develop a single performance evaluation method, we reiterate that greater standardization of the performance evaluation methods will improve the accuracy of measuring and verifying demand response performance and may reduce costs. ELCON expresses concern that the views of RTOs and ISOs will be given greater consideration than those of other participants in the NAESB process. As discussed earlier, the NAESB process requires consensus agreement from all seven segments of the industry and no segment, therefore, can dominate the development of a standard. We expect the participants in the NAESB process actively to consider and be open to proposals and concerns from any source and to try to reconcile differences so that the standards promote accurate measurement and verification of the performance of demand resources. 3. Suggested Improvements to Standards 35. In the Phase I M&V NOPR, the Commission stated that these standards represent a starting place to develop a more comprehensive set of standards, with the development of more detailed technical standards for the measurement and verification of demand response resources, to take place in the Phase II M&V Standards development process. 36. A few of the commenters have raised some specific concerns that they would like addressed in the Phase II M&V Standards development process. For example, ELCON complains that the NAESB process gives too much weight to the views of ISOs and RTOs and argues that the standards place specific requirements on demand response providers while not spelling out the complementary obligations of system operators. ELCON would like this corrected in the Phase II M&V Standards process.\21\
Water Project stresses that the Phase II M&V Standards should be designed to accurately verify the performance of demand response resources according to the specific service they are providing.
Curtailment Specialists suggests the DSM subcommittee concentrate its efforts on developing the five baseline types; Baseline Type-I and
Type-II, Meter Before/Meter After, Maximum Base Load and Metering
Generator Output.
\21\ ELCON Comments at 3.
-
Commission Determination 37. As discussed above, the NAESB process provides for a reasonable balance of interests so that no one sector, RTOs or any other sector, can dominate the process. We agree that the process needs to consider the issues and views of the participants. We expect the NAESB process to develop Phase II M&V standards which incorporate the interests of all stakeholders in the process of developing consensus standards. In response to Curtailment Specialists, we expect Phase II will address issues related to baseline
Page 20906
development, but we do not believe that Phase II should be limited to baseline development issues alone. 4. Deadline for Phase II M&V Standards Development 38. In the Phase I M&V NOPR, the Commission invited comment on whether the Commission should establish a deadline to complete the
Phase II M&V Standards. The comments we received were split on this issue. a. Comments 39. ELCON strongly supports a deadline for the development of the
Phase II M&V Standards.\22\ EPSA and TVA support a deadline that should take into consideration efforts underway at the North American Electric
Reliability Corporation (NERC) and the National Institute for Standards and Technology (NIST) for both demand response and Smart Grid activities. Similarly, FirstEnergy recommends that the Commission coordinate its efforts with those of NERC, NIST and the Electric Power
Research Institute. EPSA also supports prompt action and notes that
NERC is in the process of developing demand response measurement standards through its Demand Response Availability Data System (DADS).
EPSA expresses concern that a long delay in the Phase II M&V Standards development process may hinder NERC's demand response registration processes. Likewise, Comverge and EnerNOC also both support an aggressive deadline for the timely completion of the Phase II M&V
Standards development process.
\22\ ELCON Comments at 3.
40. By contrast, ISO/RTO Council, FirstEnergy, EEI, SDG&E, NRECA and the Indiana Commission all oppose a deadline. They all argue that setting a deadline would be premature and contend that the NAESB process should be allowed to run its course. Many of these commenters, however, agree that, absent a deadline, it would be appropriate for
NAESB to provide the Commission with regular status reports on the progress made in the development of the Phase II M&V Standards.\23\
\23\ See comments by FirstEnergy, EEI, Indiana Commission and
ISO/RTO Council.
-
Commission Determination 41. We request that NAESB seek to conclude its Phase II M&V
Standards development within one year from the effective date of this order. In light of the importance of measuring and verifying demand response products, as well as the utility of these standards to the
NIST and NERC initiatives, the Phase II M&V Standards should be developed as soon as possible. Prompt action in developing the Phase II
M&V Standards is essential, in light of the importance of these standards in ensuring that the performance of demand response resources can be accurately quantified. A year for development of such standards is reasonable. Due to the importance of these standards, if NAESB is unable to fully develop standards within the one-year period, we request that it file a report with the Commission indicating the progress it has made, including the standards it has considered and the issues on which it has been unable to reach consensus. The Commission can then build upon the information developed during the NAESB process to propose standards or establish procedures for the development of such standards.
-
-
Incorporation by Reference 42. A number of organizations (Industrial Coalitions, NRECA, and the Indiana Commission) filed comments objecting to the incorporation by reference of the NAESB standards, maintaining they should not have to pay to obtain copies of the copyrighted standards. We addressed this issue at length in Order No. 676-E \24\ in November of 2009, concluding that the NAESB process is the most efficient and cost-effective method of developing these standards, incorporation by reference is the appropriate method for the Commission to adopt the regulations, and the
Commission must respect NAESB's copyright.\25\ As we pointed out in that order, obtaining these standards is not cost prohibitive. NAESB, in fact, makes the standards available for free for three consecutive business days for those who want to view the standards in order to make comments with the Commission.\26\ Even for those non-members seeking to purchase a copy, the standards are available for $900, which is not prohibitive, given the costs of otherwise participating in a notice and comment rulemaking proceeding, including the hiring of legal counsel.
\24\ Order No. 676-E, FERC Stats. & Regs. ] 31,299 at P 115-121.
\25\ Id.
\26\ http://www.naesb.org/misc/NAESB_Nonmember_Evaluation_
LockLizard.pdf.
-
-
Implementation Dates and Procedures 43. The Commission is requiring, consistent with our regulation at 18 CFR 35.28(c)(vi), each ISO and RTO to revise its OATT to include the
NAESB Phase I M&V Standards we are incorporating by reference herein.
For standards that do not require implementing tariff provisions, the
Commission will allow the ISO or RTO to incorporate the WEQ standard by reference in its OATT. Compliance with the standards incorporated in this Final Rule will be required beginning on the same date that the rule becomes effective (i.e., thirty days after publication in the
Federal Register), even if this precedes the filing of a revised OATT reflecting these new requirements. 44. However, as we proposed in the Phase I M&V NOPR, to lighten the burden associated with an immediate, stand-alone filing of a revised tariff reflecting the standards incorporated by reference in this Final
Rule, we are giving ISOs and RTOs the option of including these changes as part of an unrelated tariff filing, even though compliance with the revised standards is required beginning on the effective date of this
Final Rule.\27\
\27\ See Order No. 676, P 100 (2006). If the ISO or RTO makes no unrelated tariff filing by December 31, 2010, it must make a separate tariff filing incorporating these standards by that date.
45. If adoption of these standards does not require any changes or revisions to existing OATT provisions, ISOs and RTOs may comply with this rule by adding a provision to their OATTs that incorporates the standards adopted in this rule by reference, including the standard number used to identify the standard. To incorporate this standard into their OATTs, ISOs and RTOs must use the following language in their
OATTs: Measurement and Verification of Wholesale Electricity Demand
Response (WEQ-015, 2008 Annual Plan Item 5(a), March 16, 2009). 46. If an ISO or RTO requests waiver of a standard, it will not be required to comply with the standard until the Commission acts on its waiver request. Therefore, if an ISO or RTO has obtained a waiver or has a pending request for a waiver, its proposed revision to its OATT should not include the standard number associated with the standard for which it has obtained or seeks a waiver. Instead, the ISO or RTO's OATT should specify those standards for which the ISO or RTO has obtained a waiver or has pending a request for waiver. Once a waiver request is denied, the ISO or RTO will be required to include in its OATT the standard(s) for which waiver was denied.
-
Notice of Use of Voluntary Consensus Standards 47. In section 12(d) of NTT&AA, Congress affirmatively requires federal
Page 20907
agencies to use technical standards developed by voluntary consensus standards organizations, like NAESB, as the means to carry out policy objectives or activities determined by the agencies unless use of such standards would be inconsistent with applicable law or otherwise impractical.\28\ NAESB approved the standards under its consensus procedures. Office of Management and Budget Circular A-119 (Sec. 11)
(February 10, 1998) provides that federal agencies should publish a request for comment in a NOPR when the agency is seeking to issue or revise a regulation proposing to adopt a voluntary consensus standard or a government-unique standard. The Commission published a request for comment in the Phase I M&V NOPR.
\28\ See n.12 supra.
-
Information Collection Statement 48. The Office of Management and Budget's (OMB) regulations in 5
CFR 1320.11 require that it approve certain reporting and recordkeeping requirements (collections of information) imposed by an agency. Upon approval of collections of information, OMB is expected to assign new expiration dates to FERC-516 (OMB Control Number 1902-0096) and FERC- 717 (OMB Control Number 1902-0173). The OMB Control Numbers will not be displayed in the NAESB standards; an explanation will be included in the clearance package submitted to OMB. The Commission will not enforce the requirements of this rule until OMB approval is obtained. 49. This Final Rule upgrades the Commission's current business practice and communication standards to include NAESB's Phase I M&V
Standards. The implementation of these standards is necessary to increase the efficiency of demand response in wholesale electric energy markets. In addition, requiring such information ensures a common means of communication and ensures common business practices that provide participants engaged in transactions with demand response programs with timely information and consistent business procedures across multiple markets. The implementation of these data requirements will help the
Commission carry out its responsibilities under the Federal Power Act. 50. The Commission sought comments on its estimate provided in the
NOPR of the burden associated with adoption of the NOPR proposals. In response to the NOPR, no comments were filed that addressed the reporting burden imposed by these requirements. Therefore the
Commission will use these same estimates in this Final Rule.
\29\ ``FERC-516'' is the Commission's identifier that corresponds to OMB control no. 1902-0096 which identifies the information collection associated with Electric Rate Schedules and
Tariff Filings.
\30\ ``FERC-717'' is the Commission's identifier that corresponds to OMB control no. 1902-0173 which identifies the information collection associated with Standards for Business
Practices and Communication Protocols for Public Utilities.
Number of
Data collection
Number of
responses per
Hours per
Total Number respondents
respondent
response
of hours
FERC-516 \29\...................................
6
1
6
36
FERC-717 \30\...................................
6
1
12
72
Totals...................................... .............. .............. ..............
108
Total annual Hours for Collection.
(Reporting and Recordkeeping, if appropriate) = 108 hours.
Information Collection Costs: The Commission seeks comments on the costs to comply with these requirements. The Commission projects the average annualized cost for all respondents as follows: \31\
\31\ The total annualized costs for the information collection is $39,960. This number is reached by multiplying the total hours to prepare responses (108) by an hourly wage estimate of $370 (a composite estimate that includes legal, technical and support staff rates, $250 + $95 + $25 = $370), 108 hours x $370/hour = $39,960.
\32\ We note that 36 hours at $370/hour= $13,320 and 72 hours at
$370/hour = $26,640. Together, $13,320 + $26,640 = $39,960 as shown in note 32, supra.
FERC-516
FERC-717
Annualized Capital/Startup Costs..............
$13,320
$26,640
Annualized Costs (Operations & Maintenance)...
N/A ...........
Total Annualized Costs....................
13,320 \32\ 26,640
51. OMB regulations \33\ require OMB to approve certain information collection requirements imposed by agency rule. The Commission is submitting this Final Rule to OMB. These information collections are mandatory requirements.
\33\ 5 CFR 1320.11.
Title: Standards for Business Practices and Communication Protocols for Public Utilities (formerly Open Access Same Time Information
System) (FERC-717); Electric Rate Schedule Filings (FERC-516).
Action: Information collection.
OMB Control No.: 1902-0096 (FERC-516); 1902-0173 (FERC-717).
Respondents: Business or other for profit (Public Utilities--Not applicable to small businesses).
Frequency of Responses: One-time implementation (business procedures, capital/start-up). 52. Necessity of Information: The Commission's regulations adopted in this rule upgrade the Commission's current business practices and communication standards by standardizing the definitions used by ISOs and RTOs to identify their various demand response products and to measure and verify the results obtained by these products. Moreover, the implementation of these data requirements will help ensure consistency among the ISOs/RTOs with respect to the measurement and verification of demand response performance in their wholesale electricity markets. 53. Interested persons may obtain information on the reporting requirements by contacting: Federal
Page 20908
Energy Regulatory Commission, Attn: Ellen Brown, Office of the
Executive Director, 888 First Street, NE., Washington, DC 20426 Tel:
(202) 502-8663, fax: (202) 273-0873, e-mail: DataClearance@ferc.gov or by contacting: Office of Management and Budget, Office of Information and Regulatory Affairs, Washington, DC 20503 [Attention: Desk Officer for the Federal Energy Regulatory Commission, e-mail: oira_ submission@omb.eop.gov; Tel: (202) 395-4638, fax: (202) 395-7285].
Comments to OMB should include the appropriate OMB Control Number(s) and collection number(s) (OMB Control No. 1902-0096 for FERC-516, and/ or OMB Control No. 1902-0173 for FERC-717) as a point of reference.
-
Environmental Analysis 54. The Commission is required to prepare an Environmental
Assessment or an Environmental Impact Statement for any action that may have a significant adverse effect on the human environment.\34\ The
Commission has categorically excluded certain actions from these requirements as not having a significant effect on the human environment.\35\ The actions adopted here fall within categorical exclusions in the Commission's regulations for rules that are clarifying, corrective, or procedural, for information gathering analysis, and dissemination, and for sales, exchange, and transportation of natural gas and electric power that requires no construction of facilities. Therefore, an environmental assessment is unnecessary and has not been prepared in this Final Rule.
\34\ Order No. 486, Regulations Implementing the National
Environmental Policy Act, 52 FR 47897 (Dec. 17, 1987), FERC Stats. &
Regs. Preambles 1986-1990 ] 30,783 (1987).
\35\ 18 CFR 380.4.
-
Regulatory Flexibility Act 55. The Regulatory Flexibility Act of 1980 (RFA) \36\ generally requires a description and analysis of final rules that will have significant economic impact on a substantial number of small entities.
In drafting a rule an agency is required to: (1) Assess the effect that its regulation will have on small entities; (2) analyze effective alternatives that may minimize a regulation's impact; and (3) make the analysis available for public comment.\37\
\36\ 5 U.S.C. 601-612.
\37\ 5 U.S.C. 601-604.
56. The regulations we are adopting in this Final Rule impose filing requirements only on ISOs and RTOs, none of which is a small business. Moreover, these requirements are designed to benefit all customers, including small businesses. As noted above, adoption of consensus standards helps ensure the reasonableness of the standards by requiring that the standards draw support from a broad spectrum of industry participants representing all segments of the industry.
Because of that representation and the fact that industry conducts business under these standards, the Commission's regulations should reflect those standards that have the widest possible support. 57. Accordingly, pursuant to section 605(b) of the RFA, the
Commission hereby certifies that the regulations adopted herein will not have a significant adverse impact on a substantial number of small entities.
-
Document Availability 58. In addition to publishing the full text of this document in the
Federal Register, the Commission provides all interested persons an opportunity to view and/or print the contents of this document via the
Internet through FERC's Home Page (http://www.ferc.gov) and in FERC's
Public Reference Room during normal business hours (8:30 a.m. to 5 p.m.
Eastern time) at 888 First Street, NE., Room 2A, Washington, DC 20426. 59. From FERC's Home Page on the Internet, this information is available on eLibrary. The full text of this document is available on eLibrary in PDF and Microsoft Word format for viewing, printing, and/or downloading. To access this document in eLibrary, type the docket number excluding the last three digits of this document in the docket number field. 60. User assistance is available for eLibrary and the FERC's Web site during normal business hours from FERC Online Support at 202-502- 6652 (toll free at 1-866-208-3676) or email at ferconlinesupport@ferc.gov, or the Public Reference Room at (202) 502- 8371, TTY (202)502-8659. Email the Public Reference Room at public.referenceroom@ferc.gov.
-
Effective Date and Congressional Notification 61. These regulations are effective May 24, 2010. The Commission has determined (with the concurrence of the Administrator of the Office of Information and Regulatory Affairs of OMB) that this rule is not a
``major rule'' as defined in section 351 of the Small Business
Regulatory Enforcement Fairness Act of 1996.
List of Subjects in 18 CFR Part 38
Conflict of interests, Electric power plants, Electric utilities,
Incorporation by reference, Reporting and recordkeeping requirements.
By the Commission.
Nathaniel J. Davis, Sr.,
Deputy Secretary. 0
In consideration of the foregoing, the Commission amends part 38,
Chapter I, Title 18, Code of Federal Regulations, as follows.
PART 38--BUSINESS PRACTICE STANDARDS AND COMMUNICATION PROTOCOLS
FOR PUBLIC UTILITIES 0 1. The authority citation for part 38 continues to read as follows:
Authority: 16 U.S.C. 791-825r, 2601-2645; 31 U.S.C. 9701; 42
U.S.C. 7101-7352. 0 2. In Sec. 38.2, paragraphs (a)(10), (a)(11), and (b) are revised and paragraph (a)(12) is added to read as follows:
Sec. 38.2 Incorporation by Reference of North American Energy
Standards Board Wholesale Electric Quadrant standards.
(a) * * *
(10) Public Key Infrastructure (PKI) (WEQ-012, Version 002.1, March 11, 2009, with minor corrections applied on May 29, 2009 and September 8, 2009);
(11) Open Access Same-Time Information Systems (OASIS)
Implementation Guide, Version 1.5 (WEQ-013, Version 002.1, March 11, 2009, with minor corrections applied on May 29, 2009 and September 8, 2009); and
(12) Business Practices for Measurement and Verification of
Wholesale Electricity Demand Response (WEQ-015, 2008 Annual Plan Item 5(a), March 16, 2009).
(b) This incorporation by reference was approved by the Director of the Federal Register in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. Copies of these standards may be obtained from the North American
Energy Standards Board, 801 Travis Street, Suite 1675, Houston, TX 77002, Tel: (713) 356-0060. NAESB's Web site is at http:// www.naesb.org/. Copies may be inspected at the Federal Energy
Regulatory Commission, Public Reference and Files Maintenance Branch, 888 First Street, NE., Washington, DC 20426, Tel: (202) 502-8371, http://www.ferc.gov, or at the National Archives and Records
Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/ federal_register/
Page 20909
code_of_federal_regulations/ibr_locations.html.
* * * * *
Note: The following Appendix will not appear in the Code of
Federal Regulations.
Appendix A
List of Commenters \38\
\38\ The abbreviations used to identify these commenters in this
Final Rule are shown parenthetically.
California Department of Water Resources State Water Project (Water
Project)
California Public Utilities Commission (California Commission) (with notice of intervention)
Comverge, Inc. (Comverge)
Duke Energy Corporation (Duke)
Edison Electric Institute (EEI)
FirstEnergy Service Company (FirstEnergy)
Electric Power Supply Association (EPSA)
Electricity Consumers Resource Council (ELCON)
Energy Curtailment Specialists, Inc. (Curtailment Specialists) (also filed motion to intervene)
EnerNOC, Inc. (EnerNOC) (also filed motion to intervene)
Indiana Utility Regulatory Commission (Indiana Commission) (with notice of intervention)
Industrial Coalitions \39\
\39\ Filed on behalf of Coalition of Midwest Transmission
Customers, NEPOOL Industrial Customer Coalition, and PJM Industrial
Customer Coalition.
List of Commenters
ISO/RTO Council \40\
\40\ ISO/RTO Council includes the Independent System Operators operating as the Alberta Electric System Operator, the California
Independent System Operator, Electric Reliability Council of Texas, the Independent Electricity System Operator of Ontario, Inc., ISO
New England, Inc., Midwest Independent Transmission System Operator,
Inc., New York Independent System Operator, Inc., PJM
Interconnection, L.L.C., Southwest Power Pool, Inc., and New
Brunswick System Operator.
National Association of Regulatory Utility Commissioners (NARUC)
National Rural Electric Cooperative Association (NRECA)
Public Interest Organizations (Public Interest Orgs) \41\
\41\ Jointly filed on behalf of Project for Sustainable FERC
Energy Policy, Natural Resources Defense Council, the Pace Energy and Climate Center and Conservation Law Foundation.
San Diego Gas & Electric Company (SDG&E)
Tennessee Valley Authority (TVA) (with motion to intervene)
Westar Energy, Inc. (Westar) (with motion to intervene)
FR Doc. 2010-9084 Filed 4-21-10; 8:45 am
BILLING CODE 6717-01-P
