Air programs: Implementation plans; preparation, adoption, and submittal requirements; CFR correction,

[Federal Register: June 29, 2007 (Volume 72, Number 125)]

[Rules and Regulations]

[Page 35663]

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

[DOCID:fr29jn07-11]

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 51

Requirements for Preparation, Adoption, and Submittal of Implementation Plans

CFR Correction

In Title 40 of the Code of Federal Regulations, Parts 50 to 51, revised as of July 1, 2006, in Appendix S to Part 51, on page 483, reinstate paragraph II.A.4(iii) to read as follows:

Appendix S to Part 51--Emission Offset Interpretative Ruling

* * * * *

II.* * *

A.* * *

4.* * *

(iii) The fugitive emissions of a stationary source shall not be included in determining for any of the purposes of this ruling whether it is a major stationary source, unless the source belongs to one of the following categories of stationary sources:

(a) Coal cleaning plants (with thermal dryers);

(b) Kraft pulp mills;

(c) Portland cement plants;

(d) Primary zinc smelters;

(e) Iron and steel mills;

(f) Primary aluminum ore reduction plants;

(g) Primary copper smelters;

(h) Municipal incinerators capable of charging more than 250 tons of refuse per day;

(i) Hydrofluoric, sulfuric, or nitric acid plants;

(j) Petroleum refineries;

(k) Lime plants;

(l) Phosphate rock processing plants;

(m) Coke oven batteries;

(n) Sulfur recovery plants;

(o) Carbon black plants (furnace process);

(p) Primary lead smelters;

(q) Fuel conversion plants;

(r) Sintering plants;

(s) Secondary metal production plants;

(t) Chemical process plants;

(u) Fossil-fuel boilers (or combination thereof) totaling more than 250 million British thermal units per hour heat input;

(v) Petroleum storage and transfer units with a total storage capacity exceeding 300,000 barrels;

(w) Taconite ore processing plants;

(x) Glass fiber processing plants;

(y) Charcoal production plants;

(z) Fossil fuel-fired steam electric plants of more than 250 million British thermal units per hour heat input;

(aa) Any other stationary source category which, as of August 7, 1980, is being regulated under section 111 or 112 of the Act. * * * * *

[FR Doc. 07-55507 Filed 6-28-07; 8:45 am]

BILLING CODE 1505-01-D