Air quality implementation plans; approval and promulgation; various States: Maryland,

[Federal Register: July 25, 2000 (Volume 65, Number 143)]

[Proposed Rules]

[Page 45743]

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

[DOCID:fr25jy00-24]

ENVIRONMENTAL PROTECTION AGENCY

40 CFR Part 52

[MD042-3051b; FRL-6838-2]

Approval and Promulgation of Air Quality Implementation Plans; Maryland; Approval of Revisions to COMAR 26.11.12 Control of Batch Type Hot-Dip Galvanizing Installations

AGENCY: Environmental Protection Agency (EPA).

ACTION: Proposed rule.

SUMMARY: EPA proposes to approve the State Implementation Plan (SIP) revision submitted by the State of Maryland for the purpose of establishing operational flexibility to meet visible emission limits for batch type hot-dip galvanizing installations. In the Final Rules section of this Federal Register, EPA is approving the State's SIP submittal as a direct final rule without prior proposal because the Agency views this as a noncontroversial submittal and anticipates no adverse comments. A more detailed description of the state submittal and EPA's evaluation are included in a Technical Support Document (TSD) prepared in support of this rulemaking action. A copy of the TSD is available, upon request, from the EPA Regional Office listed in the ADDRESSES section of this document. If no adverse comments are received in response to this action, no further activity is contemplated. If EPA receives adverse comments, the direct final rule will be withdrawn and all public comments received will be addressed in a subsequent final rule based on this proposed rule. EPA will not institute a second comment period. Any parties interested in commenting on this action should do so at this time.

DATES: Comments must be received in writing by August 24, 2000.

ADDRESSES: Written comments should be addressed to Ms. Makeba A. Morris, Chief, Technical Assessment Branch, Mailcode 3AP22, U.S. Environmental Protection Agency, Region III, 1650 Arch Street, Philadelphia, Pennsylvania 19103. Copies of the documents relevant to this action are available for public inspection during normal business hours at the Air Protection Division, U.S. Environmental Protection Agency, Region III, 1650 Arch Street, Philadelphia, Pennsylvania 19103; and the Maryland Department of the Environment, 2500 Broening Highway, Baltimore, Maryland, 21224.

FOR FURTHER INFORMATION CONTACT: Ruth E. Knapp, (215) 814-2191, at the EPA Region III address above, or by e-mail at knapp.ruth@epamail.epa.gov.

SUPPLEMENTARY INFORMATION: For further information, regarding the revisions to Maryland's regulation on batch type hot-dip galvanizing installations, please see the information provided in the direct final action, with the same title, that is located in the ``Rules and Regulations'' section of this Federal Register publication.

Dated: June 30, 2000. Bradley M. Campbell, Regional Administrator, Region III.

[FR Doc. 00-18529Filed7-24-00; 8:45 am]

BILLING CODE 6560-50-P