Small business size standards: Aerospace ball and roller bearings,

[Federal Register: April 16, 2001 (Volume 66, Number 73)]

[Rules and Regulations]

[Page 19381]

From the Federal Register Online via GPO Access [wais.access.gpo.gov]

[DOCID:fr16ap01-1]

Rules and Regulations Federal Register

This section of the FEDERAL REGISTER contains regulatory documents having general applicability and legal effect, most of which are keyed to and codified in the Code of Federal Regulations, which is published under 50 titles pursuant to 44 U.S.C. 1510.

The Code of Federal Regulations is sold by the Superintendent of Documents. Prices of new books are listed in the first FEDERAL REGISTER issue of each week.

[[Page 19381]]

SMALL BUSINESS ADMINISTRATION

13 CFR Part 121

Small Business Size Standards; Waiver of the nonmanufacturer rule

AGENCY: Small Business Administration.

ACTION: Final decision to waive the nonmanufacturer rule.

SUMMARY: This document advises the public that the Small Business Administration (SBA) is establishing a waiver of the Nonmanufacturer Rule for aerospace ball and roller bearings, consisting of, but not limited to, annular ball bearings, cylindrical ball bearings, linear ball bearings, linear roller bearings, needle roller bearings, ball or roller bearing races, roller bearings, tapered roller bearings and thrust roller bearings. The basis for waivers is that no small business manufacturers are available to participate in the Federal market for these products. The effect of a waiver will allow otherwise qualified nonmanufacturers to supply the products of any domestic manufacturer on a Federal contract set aside for small businesses or awarded through the SBA 8(a) Program.

EFFECTIVE DATE: April 13, 2001

FOR FURTHER INFORMATION CONTACT: Edith Butler, Program Analyst, U.S. Small Business Administration, 409 3rd Street, SW., Washington, DC 20416 Tel: (202) 619-0422.

SUPPLEMENTARY INFORMATION: Public Law 100-656, enacted on November 15, 1988, incorporated into the Small Business Act the previously existing regulation that recipients of Federal contracts set aside for small businesses or SBA 8(a) Program procurement must provide the product of a small business manufacturer or processor, if the recipient is other than the actual manufacturer or processor. This requirement is commonly referred to as the Nonmanufacturer Rule. The SBA regulations imposing this requirement are found at 13 CFR 121.906(b) and 121.1106(b). Section 303(h) of the law provides for waiver of this requirement by SBA for any ``class of products'' for which there are no small business manufacturers or processors in the Federal market. To be considered available to participate in the Federal market on these classes of products, a small business manufacturer must have submitted a proposal for a contract solicitation or received a contract from the Federal government within the last 24 months.

The SBA defines ``class of products'' based on two coding systems. The first is the Office of Management and Budget Standard Industrial Classification Manual. The second is the Product and Service Code established by the Federal Procurement Data System.

This document waives the Nonmanufacturer Rule for aerospace ball and roller bearings, consisting of, but not limited to, annular ball bearings, cylindrical ball bearings, linear ball bearings, linear roller bearings, needle roller bearings, ball or roller bearing races, roller bearings, tapered roller bearings and thrust roller bearings, SIC code 3562 and North American Industry Classification System (NAICS) 332991.

Documents proposing to waive the nonmanufacturer rule for the aerospace ball and roller bearings, consisting of, but not limited to, annular ball bearings, cylindrical ball bearings, linear ball bearings, linear roller bearings, needle roller bearings, ball or roller bearing races, roller bearings, tapered roller bearings and thrust roller bearings specified were published on February 20, 2001 (66 FR 10842), and on March 14, 2001 (66 FR 14865). No comments were received.

Luz A. Hopewell, Associate Administrator for Government Contracting.

[FR Doc. 01-9068Filed4-13-01; 8:45 am]

BILLING CODE 8025-01-P